GOLF R MK7.5 (2019) - Audi Coding for improved throttle response - OBDEleven

Thank You, Netcruzer!! - • AUDI coding my Golf R ...
If you're looking for production value, please see Netcruzer's video. The intention of the video is to focus on the steps he took in his video, then some initial thoughts are at the end.
Throttle response mod via OBDeleven and/or VCDS on a 2019 VW Golf R (MK7.5). Also known as "Audi Coding" for Golf R.
Car was already equipped with APR Stage 1 ECU & TCU Tune. This mod did help with throttle response, but the largest improvement was launch control. Prior to this, launch control slipped a lot. Now, there's better traction during launches! Adaptive Cruise Control works as expected as well.
Note: Perhaps there's also some adaptation time that the ECU needs to fully optimize the throttle response changes.. I've only put about 5 miles on the car since changing the coding.
MK7.5 Golf R (2019) - obdEleven / VCDS - Coding for Improved Throttle Response (Audi Coding):
Step 1. In OBDeleven, open “Steering Assistance” module.
- Select “Adaptation”
- Select “Driver Profile Switchover”
- Change to “Direct Controlled Over Threshold.”
Step 2. In OBDeleven, select “Engine” module.
- Navigate to, and select “Long Coding”
- Select Byte 00 (Loads to this by default)
- Deselect all bits
- Select bit 1
- Hex Code: 02 - after selecting bit 1
Step 3. In OBDeleven, select “Adaptive Cruise Control” module - change “Brand Logic to Audi”
- Navigate to “Adaptive Cruise Control” module
- Select “Long Coding”
- Select “Brand logic” (this is near the bottom of the list)
- Switch “VW” to “Audi”
Step 4. In OBDeleven, select “Brakes” module
- Select “Adaptation”
- Navigate to “Rough Road Optimization”
- Switch to “not activated.”

[@netcruzer]

Thanks for the reference shoutouts. I’ve got some feedback on this that it all works as long as you have adaptive cruise module. If you don’t, you can’t get cruise working with Audi engine hex code. The last one is rough road optimization totally optional, just allows for more wheel spin on launches. Something you may or may not want.

[@LayMamaHoMah]

Thanks for sharing. 2nd step - can't get the long coding to work. OBD11 says function not available. My MK7.5 does not have the ACC.

[@AlexDjS]

Hi, does it work for Tiguan 2018? Thanks.

[@RadFox1320]

Bro, what is your actual long code for step 3? I have VCDS and I dont know what bits your changing. This is the brand logic step.

[@majklxxx]

I have radar in bumper, I have ACC but in VCDS I dot see Address 05: Acc/Start auth.. whats wrong ? Otherwise I cant set Brand logic to Audi ..

[@jj-tq4hx]

Will this obdeleven audi mod work for a 21 Arteon?

[@masoodfarooquevm5956]

I tried doing this on my 2020 VW atlas CS and byte 00 was set to bit 0 changed that to bit 1 it didn’t accept the value any idea if it supports? I have the ACC!

[@MsNathan9]

What about mk7.5 gti

[@laurencerucker2585]

Can you just change the Adaptive Cruise Control so you can get the warning if you go over the speed limit as show by the sign recognition? I have already activated speed recognition using OBD11 and signs show up in dash in my Golf MK7.5 ... want to be able to set warning for when I exceed speed. With Audi you can set value over limit? Can not find a way for doing this in VW except maybe the setting in long coding which are not activated ... 'Speed_limit_assistent' and 'Traffic_sign_detection' ... IF I change these to activated will that allow this? Thanks Laurie

[@dopey3511]

You put on adaptive cruise control without having the actual feature on the car? It worked only by using the park sensors? I’m confused, sorry.

[@lvcsslacker]

really wish there was a way to keep basic cruise control while doing the mod. :(

[@HaveOneWithHans]

Does it work for mk7??

[@99rase]

will this compromise my stage 1 tune?

[@gaoglai7127]

lol titanium RED phone..