STOP GoPro Lens Water Droplets | RAW POV
HTML-код
- Опубликовано: 18 фев 2024
- Stop getting water droplets on your GoPro lens by using a lighter and burning the hydrophobic lens off. It would be best if you did this at your own risk and I am sure it will help you get clearer and better clips with this new epic camera.
GoPro Hero 12: amzn.to/42I35Ka
Lens Replacement: amzn.to/3wkiJiP
👕 Merch Store
▶▶ boogieeveryday.com/
🤙 ꜱᴜᴘᴘᴏʀᴛ ᴍʏ ᴄʜᴀɴɴᴇʟ
▶▶ PayPal.me/iaincampbell07
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
𝐓𝐇𝐄 𝐓𝐎𝐎𝐋 𝐈 𝐔𝐒𝐄
www.amazon.com/shop/iaincampbell
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
🤙 𝐆𝐄𝐓 𝐂𝐎𝐍𝐍𝐄𝐂𝐓𝐄𝐃:
👥 Facebook: / iaincampbell07
📸 Instagram: / iaincampbell_
🐦 Tweet ME: / iaincampbell_
🌍 Linkedin: / iain-campbell-29918b89
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
🎵 𝐌𝐔𝐒𝐈𝐂 𝐁𝐘:
artlist.io/Iain-45161
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Disclaimer: The information contained on this RUclips Channel and the resources available for download/viewing through this RUclips Channel are for educational and informational purposes only.
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
#iaincampbell #boogieeveryday #goprohero12 
Спорт
Sick, definitely going to use this video for when I get a GoPro!
same
Right on!
Aaaahhhhh! Boytjie... What Super Awesome Screen Shots I got. One with the Tip of Your Board with the Stunning Clouds & the Second One with the Double Rainbow and Your Hand!!
Absolutely Beautiful!!
Thanks 🙏🏼
It works great!
Good info Ian....(got my fins on my old board now and boi does it track well...surprising really, i can even crank a good turn with them!)
Good to hear. Get out there and enjoy 🤙🏼
Amazing tips ❤
Glad you think so! 😉
It looks top !!! Just saw your video. Happy it works for you
Did you do it on Max Lens 2.0 ? cause that's the one I prefer
Thanks for help
I’ve just started using the Max Lens 2.0 and I did the same thing and worked super well. Worth giving it a try.
Put out a video last week about it. Check the footage and let me know.
Fusso never wet is great, clears instantly
I’m confused by that…
Thank you for this. I actually thought my problem was that the hydrophobic properties had gotten ruined on my GoPro, not the other way around. I literally have just ordered some hydrophobic spray, so that was maybe a waste of money. Oh well. Appreciate the knowledge and the great boogie content.
Thanks 🙏🏼 glad to help. Hope this works 🙏🏼
Footage looks great! Did you do anything with previous generation GoPros to help with water droplets?
Before the 9 you can just lick it because it doesn’t have the film. They added the hydrophobic film on the 9 and after
When they started the interchangeable lens, the 9 wasnt hydrophobic… they 10 was. I was just using the 9 always.
@@iaincampbell_ my 9 was hydrophobic 🤷♂️
I have been burning the film off the last few years, sometimes I accidentally melted the gasket and water would get inside the lens so you have to be careful not to do that. Also might be a good idea to twist the lens off the camera before burning it in case of accidentally burning the camera itself. More recently (after melting the gasket on 2 lens covers) I tried using it without burning it and I’ve found that if you dip the camera and lift it vertically out of the water no drops stick. If its windy or you splash the camera a bunch this doesn’t work super well because new water gets on the camera. For clean conditions it work pretty good
My problem is when you’re riding it’s not always dipping. Easier to burn it carefully. And you can always take that gasket off…
You can do the same lighter trick with a new diving mask to stop it from fogging up. There is normally a plastic layer on the inside that needs to be removed.
Same same bru… that’s the one 😉
So you basically just burn the lense then spit and leave it over night? And that works for the hero 12 right? Have to try it out because I always get water droplets on my lense mid ride.
Yup, that’s pretty much it 😅
@@iaincampbell_ thanks you and this works for the new hero 12?
Same process as with a dive mask
Exactly 👍🏼
Nice🌈🤙💙
Maybe a heatgun could be more safe to remove film...
You have to go pretty hard with a naked flame on and off for it to work and I’m not sure the heat gun would cut it. Plus you can kinda navigate the flame of a lighter over the lens apposed to just blasting the seals with heat as well