After watching your video, spending 6 and a half hours on the update itself, as well as reading a forum on focusfanatics on how to do so, I successfully completed this in my 2014 Ford Focus Se!! Thank you so much! Next up is upgrading Sync 1 to Sync 3. Got all the parts ordered except for 2.
@@faymzk20 unfortunately this jackass keeps deleting my comment instead of helping anyone accomplish anything so im going to make a detailed video on how to do this for all Ford Focus Mk 3 owners.
hello Could you tell me where you downloaded the files so you can install them on the screen? these new parameters such as digital speedometer make a more specific tutorial on how to download the files and install thank you for your attention
Hi, I bought a focus 1.6 tdci and had to replace ecu along with key clusters abs pump and fuse box, the car didn’t start and apparently I will have to reprogram the ecu, would you know if the software would work for that? Thank you
I did the update of the ipc as per video with a ucds clone and for 40 minutes and everything went fine except for the ford logo at the beginning and the warning sounds when the door is open. if you can help me thank you
After following the steps, my car is showing a check engine light, can anyone help me understand what needs to be done to correct it from home? 2014 focus se flex fuel.
Good morning mate. Im from Greece . where can i get these files to upgrade my IPC as well? its so easy as it looks? i have to care about something ? i have the titanium version without parking assist. can be done?
I have a focus SE sedan 2015 I want to delete the MyKey speed limit is at 80 right now do you think I can do that with UCDS pro? also I want to update the TCM
@@klenzo8543 Hello, I received the clone of UCDS 1.27 and tried to do the same procedure as you did, but it doesn't work. ruclips.net/video/SwBEKslI_Cg/видео.html
I tried to update my IPC but it failed (forscan). Focccus tells me unknown ECU HW... Can somebody help me out? Focccus tells me HW is F1ET-14F094-JB ForScan offers to update with files as followed BootLoader: F1ET-14C025-BB Strategy F188: F1ET-14C026-BBG Strategy F120: F1ET-14C026-BCC Strategy F121: F1ET-14C026-BSE Signal configuration: F1ET-14C318-BB Forscan fails writing these files. Focccus says unknown ECU and won´t even try to write. IPC is almost dead :(
@@klenzo8543 Hey... thanks for your answer! I´ve already watched your video before - i´m still waiting for my UCDS delivery from russia :( Seems that i stuck here until it arrives?!
@@klenzo8543 very good video sir. can i use ucds pro+ with free 35 token to upload and recovered f120 picture file. do i need flash all 5 file or just the picture.thanks in advance.
@@nattakwan1 hi There's a know issue with the Parking Sensors on the Prefaclift modules Solved but updating the module or buying the newer Facelift Module Easy fix
![3 Ford Focus Features You Can Program With Forscan! [Focus ST/RS]](http://i.ytimg.com/vi/yJWMu6cCksc/mqdefault.jpg)
![[DOKKAN BATTLE] Worldwide Campaign Announcement Video](http://i.ytimg.com/vi/zxfEiMksZQs/mqdefault.jpg)
After watching your video, spending 6 and a half hours on the update itself, as well as reading a forum on focusfanatics on how to do so, I successfully completed this in my 2014 Ford Focus Se!! Thank you so much! Next up is upgrading Sync 1 to Sync 3. Got all the parts ordered except for 2.
Hi! What forum on FF did you look off of? I have the same model of car and am looking to do this as well
@@faymzk20 unfortunately this jackass keeps deleting my comment instead of helping anyone accomplish anything so im going to make a detailed video on how to do this for all Ford Focus Mk 3 owners.
@@svtshotti Alright, let me know when you do :)
@@faymzk20 ruclips.net/video/vmiQBgWdrQ4/видео.html
@@faymzk20 ruclips.net/video/vmiQBgWdrQ4/видео.html
Can you please add link to purchase the connector ? And software ? I just got 2014 focus so I am ready to try out. Thank you
How much time took You the procedure? With a Vlinker FS USB the time can be the same or more?
hello Could you tell me where you downloaded the files so you can install them on the screen? these new parameters such as digital speedometer make a more specific tutorial on how to download the files and install thank you for your attention
There is no parking sound after IPC update. Is any solution?
Will this work for a Ford C-Max 2012?
Hi, I bought a focus 1.6 tdci and had to replace ecu along with key clusters abs pump and fuse box, the car didn’t start and apparently I will have to reprogram the ecu, would you know if the software would work for that? Thank you
bro can we really do this on a ford mk3 2012?
I did the update of the ipc as per video with a ucds clone and for 40 minutes and everything went fine except for the ford logo at the beginning and the warning sounds when the door is open. if you can help me thank you
After following the steps, my car is showing a check engine light, can anyone help me understand what needs to be done to correct it from home?
2014 focus se flex fuel.
Good morning mate. Im from Greece . where can i get these files to upgrade my IPC as well? its so easy as it looks? i have to care about something ? i have the titanium version without parking assist. can be done?
Can this be done with ForScan 2.4???
How do you know which files to upload to which number?
Hy.. Im from indonesia
May I ask to send the software file?
I have a focus SE sedan 2015 I want to delete the MyKey speed limit is at 80 right now do you think I can do that with UCDS pro? also I want to update the TCM
Speed limit delete use this cheaper. ruclips.net/video/O4SkQRX--zY/видео.html
hello.how do you now what files do you needand whrer are they from
Can u provide a video for digital dash of ford with miles to KM filimware update
ruclips.net/video/vmiQBgWdrQ4/видео.html
Does it's the same files for manual transmission?
Should be different
hello i wish you can send me the files
and a question does it work for my ford focus 2014 se?
thank you
Yes it does work for your 14 SE! ruclips.net/video/vmiQBgWdrQ4/видео.html
Hi! encode key?
Hello I am trying can you please send me link of the software you used?
ruclips.net/video/vmiQBgWdrQ4/видео.html
dont do this unless you know and learn what to do your reprograming modules in your car you can fuck it up
Hello, how long did this update?
40 to 50 minutes
@@klenzo8543 Hello, I received the clone of UCDS 1.27 and tried to do the same procedure as you did, but it doesn't work.
ruclips.net/video/SwBEKslI_Cg/видео.html
@MACE GAMER no, ucds clone no va bene per me. Si blocca dopo pochi istanti.
Where Can I get the programs and files to update?
Pm ur email, I can send them
@@klenzo8543 may i also get sent the programs?
and iam hussinmb@gmail.com
Hi u can send my your programs and files to update?
Thanks u!!!
My email: quockhanhford@gmail.com
@@klenzo8543
Can you send me all what is needed and what cable you use for obd
Thanks for great video
I tried to update my IPC but it failed (forscan). Focccus tells me unknown ECU HW...
Can somebody help me out?
Focccus tells me HW is F1ET-14F094-JB
ForScan offers to update with files as followed
BootLoader: F1ET-14C025-BB
Strategy F188: F1ET-14C026-BBG
Strategy F120: F1ET-14C026-BCC
Strategy F121: F1ET-14C026-BSE
Signal configuration: F1ET-14C318-BB
Forscan fails writing these files.
Focccus says unknown ECU and won´t even try to write.
IPC is almost dead :(
I had the same experienced before. My ipc was a totally dead. Pls check my other video how I regained my ipc back. Goodluck mate!!!
@@klenzo8543 Hey... thanks for your answer! I´ve already watched your video before - i´m still waiting for my UCDS delivery from russia :(
Seems that i stuck here until it arrives?!
@@klenzo8543 very good video sir. can i use ucds pro+ with free 35 token to upload and recovered f120 picture file. do i need flash all 5 file or just the picture.thanks in advance.
Hi, my car 1.6 cdti, it has BM5T-14C226-BC IPC How can i find out which file do i need to upload?
Here i've just done mine to custom backgrounds :
Latest pre-style files:
BM5T-14C026-ACC
BM5T-14C026-BBD
BM5T-14C026-AFE
CM5T-14C318-AD
Latest restyle files:
F1ET-14C026-BBJ - firmware (EXE)
F1ET-14C026-BCD - pictures (EXE )
F1ET-14C026-BFF - data (DATA)
F1ET-14C318-BD - signals (Signal Configuration)
f1et-14c025-bb - Boot Loader
@@lewishuggins18 HI, is it can use auto park/Park distance?
@@nattakwan1 hi
There's a know issue with the Parking Sensors on the Prefaclift modules
Solved but updating the module or buying the newer Facelift Module
Easy fix
@@lewishuggins18 how to fix?
@@marv4054 as above ! Facelift PDC Module