Hi james there will be a magnet and sensor for counting the revs and bed position. check the magnet and sensor position. May have moved or been knocked.
That's what I was thinking , plus with the grain whole the cattle won't get the benefit of the grains like they would if it had gone tho a forage harvester
That bale wrapper want's backing off a cliff your always having problems with it , bet its a sensor , they love a sensor on all kit these days and then they put them in the worst place possible to change , That should make some good feed , see others are asking about the conditioner on the mower surly you just slacken it off
Tell me about it James. It’s been incredible for years and then for whatever reason, this years it’s been a nightmare! However I reckon this time it could be the tractor. Swapped it back onto the 6125 and it worked perfectly 🤦🏼♂️
Hi james there will be a magnet and sensor for counting the revs and bed position.
check the magnet and sensor position. May have moved or been knocked.
Checked the sensors and that was all good, but swapped it back onto the 6125 and it worked fine! So must be an oil flow issue on the 6410 🤦🏼♂️
Hi James Hopefully the wrapper is now working Have a good weekend Thanks again
Got it going again Darran, turned out to be a tractor issue. Not 100% sure what yet though. 🤦🏼♂️
The joy stick is by far the best way to wrap, your always in control and you can wrap much faster
I didn’t even know until now you could get a joystick. That would be a dream!!
Great video again James, I think the amount of silage you do now a Fusion is the way forward for the farm ❤
Thanks Stephen! Yeh, we have been discussing it our end, they are just some serious dollar 💵 😳
JD. 6400 proper tractor 🚜 👌
They don’t make em like they used too!
Great video ❤
I have the same wrapper check the positioning sensor under the bed .There is a sensor and a magnet check the magnet hasn't come off and moved.
Checked the sensors and that was all good, but swapped it back onto the 6125 and it worked fine! So must be an oil flow issue on the 6410 🤦🏼♂️
I’d say an oil flow problem… check your no pressure return.. or swop spools around see if it meks a difference
Good luck withe the Whole crop wheat or shredded wheat for Cooooos.
Interesting to know it's analysis eventually 🤔
😊😊😊
That’s Willy, I’ll be sure to share it when we get everything done. 👍
Hey James! Nice one. How come ya didn’t leave cutting out to dry for a day?
To be honest, the grass in the crop was super dry and the wheat was on the turn so I didn’t want to loose any more moisture. 👍
Magnets on a slider on the underside of the bed of the wrapper, unscrew and move slightly
Checked the magnets and they are all fine. However we swapped it back into the 6125 and it worked fine so it must be a tractor issue 🤦🏼♂️
I would say something to do with the sensor under the bed of the wrapper
Checked the sensors and that was all good, but swapped it back onto the 6125 and it worked fine! So must be an oil flow issue on the 6410 🤦🏼♂️
It's probably a sensor that counts rotations
Checked the sensors and that was all good, but swapped it back onto the 6125 and it worked fine! So must be an oil flow issue on the 6410 🤦🏼♂️
@@baldysfarm hmm interesting, compare flow on those tractors
Doesn't the conditioner knock out any grain thats there?
That's what I was thinking , plus with the grain whole the cattle won't get the benefit of the grains like they would if it had gone tho a forage harvester
Harvesting before before the grains have become fully ripened.
mow it when about milky not cheese
Yes it will but surly you just slacken it off so it does not pinch the grass /wheat
Slackened the conditioner off but with it not being super ripe it hasn’t really been an issue. But I get your point.
Don't forget to put the spares in a safe place... You know, that very safe place where they will never be found... 😏
Don’t even joke! The amount of times I’ve done that is uncountable! 😂
I'd say a sensor problem
Checked the sensors and that was all good, but swapped it back onto the 6125 and it worked fine! So must be an oil flow issue on the 6410 🤦🏼♂️
It's a McHale I hate their wrappers
Yeh, I’m a big Mchale fan but the wrapper have been a bit disappointing tbh.
@@baldysfarm get a claas uniwrap it will not disappoint
That bale wrapper want's backing off a cliff your always having problems with it , bet its a sensor , they love a sensor on all kit these days and then they put them in the worst place possible to change , That should make some good feed , see others are asking about the conditioner on the mower surly you just slacken it off
Tell me about it James. It’s been incredible for years and then for whatever reason, this years it’s been a nightmare! However I reckon this time it could be the tractor. Swapped it back onto the 6125 and it worked perfectly 🤦🏼♂️