Perfect! I’m totally new to 1/10 and about to receive my first motor/esc combo and need to solder it all together. Great clear instructions and information. Thank you 🙏🏼
Have you done one of these for the G4? I've got most everything dialed but I've got a weird boost that comes outta nowhere, like if im on the throttle 3/4 of the way on a short straight all of a sudden she rips, but then when I round the corner and line up to the next jump there's no balls to when i get on the throttle to clear the triple? Any ideas? Cheers
I bought the 17.5 fixed combo. Put it in my RB10 RTR and it was way way slower than stock. Buddy at the local hobby store tried multiple gear combos and nothing worked. Couldn't clear any jumps it was very slow. Any Ideas? Was very disappointed and ended up putting the RTR stuff back in. At this point I have a $120 paperweight sitting here.
Same issue here.. my cordless drill is faster.. VERY weak magnets in the 17.5.. I was TOLD I had to run this for rules..$600 car is now a shelf display.
Hi about Program cards. I have a lot of Hobbywing ESC from the olds XeRun (the blue ones) to EzRun Max5. I never use programs card. But now I search for one. Has one model who can be use in all the cars ESC line from hobbywing? Or is need to buy more than one?
The Hobbywing LCD Program Box. In the RC world, each brand offers their own tuner and typically they are all brand specific. The Hobbywing XERun series of ESC's works with the Hobbywing LCD Program Box, and the OTA Bluetooth Module.
Hi, I want to buy Hobbywing Ezrun Max10 Sct Combo. Hobbywing products listed in Chinese website like Aliexpress, Banggood are counterfeit? Not genuine?
I just purchased the XR10 pro elite and wanted to know is it normal for wires to be so hot? No prep application 3T motor, 5100mah 130c battery, 87/18 gearing
Might be worth dropping a few teeth on the pinion. "Low Teens" has been a safer starting point for the low turn motors. Lots of current being moved in a short time in today's drag race setups. Search "Timing" and "NPRC" on the channel for some tips on Tuning.
Will we see data logging graphs to see different parameters over a whole run rather than just max values in the future? Looking to get the XR10 Pro G2 for no prep but it currently doesn't offer this. function
Your explanation is too fast, especially you need to slow explain the plugging of Sensor cable as it is very tiny, and a bit too hard to plug this sensor cable. Also, the calibration process you explain is too fast. Maybe you can explain it more slowly. Thanks.
best solder video I have seen in a good while. Thank you!
Just about to get back into this hobby after 10years of retirement. This video is very informative as a refresher for me
Perfect! I’m totally new to 1/10 and about to receive my first motor/esc combo and need to solder it all together. Great clear instructions and information. Thank you 🙏🏼
Thanks you 🙏🙏🙏 i lost my hair figuring out the initial calibration of the just stock, thank goodness i watch your video👍🏻👍🏻👍🏻👍🏻
Great job on this detailed look at the XE10.
This is a AWESOME video....mine is due in any day now....vta racing here I come
Have you done one of these for the G4? I've got most everything dialed but I've got a weird boost that comes outta nowhere, like if im on the throttle 3/4 of the way on a short straight all of a sudden she rips, but then when I round the corner and line up to the next jump there's no balls to when i get on the throttle to clear the triple? Any ideas? Cheers
Could you show us how to use the program card on the older version
Is this truly enough for 17.5 2wd buggy racing??
No turbo and boost?
So you can’t change mode without a programme box?
Just picked this up
Heyy hobbywing 👋😃
Should i buy a quicrun 10bl120 or the xr10 g3? Its for a 1/10 rally kit
I bought the 17.5 fixed combo. Put it in my RB10 RTR and it was way way slower than stock. Buddy at the local hobby store tried multiple gear combos and nothing worked. Couldn't clear any jumps it was very slow. Any Ideas? Was very disappointed and ended up putting the RTR stuff back in. At this point I have a $120 paperweight sitting here.
did u resolve this issue?
@@AizenSousuke92 returned it and bought the pro stock ESC and a team powers 17.5. works fantastic.
Same issue here.. my cordless drill is faster.. VERY weak magnets in the 17.5.. I was TOLD I had to run this for rules..$600 car is now a shelf display.
@@oCaRRiEDx😂😂 the stock motor has 3000kv, the 17.5t has 2400kv.. but hey, i guess youre from the usa, thinking was never your strong point
@@adtjtjdjsj I guess being a rude cunt just comes naturally from wherever your from...
Looking at purchasing this for my associated 6.3. Would it be a wise choice?
Go Orca, best ESC there is.
Hello, I have the same ECS, which program card are you using? Thanks
Could i use a 3s lipo with this even though it is a 2s device?
Is there a performance advantage with the G3 juststock speedo over the older G2 juststock speedo?
Nothing "significant" that most would be able to notice. Overall, updated or newer models are always "better" though.
How does the voltage protection work if it does get reversed?
Hi about Program cards. I have a lot of Hobbywing ESC from the olds XeRun (the blue ones) to EzRun Max5. I never use programs card. But now I search for one. Has one model who can be use in all the cars ESC line from hobbywing? Or is need to buy more than one?
Is the programer specific to Hobbywing? Which one are you using?
The Hobbywing LCD Program Box.
In the RC world, each brand offers their own tuner and typically they are all brand specific.
The Hobbywing XERun series of ESC's works with the Hobbywing LCD Program Box, and the OTA Bluetooth Module.
👍👍👍
Como se modifican las rpm??
Hi, I want to buy Hobbywing Ezrun Max10 Sct Combo. Hobbywing products listed in Chinese website like Aliexpress, Banggood are counterfeit? Not genuine?
Feel free to send us an email or check the website for confirmation - NorthAmerica@hobbywing.com
I just purchased the XR10 pro elite and wanted to know is it normal for wires to be so hot?
No prep application
3T motor, 5100mah 130c battery, 87/18 gearing
Might be worth dropping a few teeth on the pinion. "Low Teens" has been a safer starting point for the low turn motors. Lots of current being moved in a short time in today's drag race setups. Search "Timing" and "NPRC" on the channel for some tips on Tuning.
I really hate external power switches 🤦
Will we see data logging graphs to see different parameters over a whole run rather than just max values in the future? Looking to get the XR10 Pro G2 for no prep but it currently doesn't offer this. function
Shoot us an email - NorthAmerica@hobbywing.com Thanks!
@@HOBBYWINGOfficial I sent one yesterday still waiting on a reply. Cheers.
If only they'd used an integrated switch..
Got the 17.5 combo as the rules said I had to have.. so slow that I wire it open and watch it like a model train set!..
Your explanation is too fast, especially you need to slow explain the plugging of Sensor cable as it is very tiny, and a bit too hard to plug this sensor cable. Also, the calibration process you explain is too fast. Maybe you can explain it more slowly. Thanks.
Can this speed control work with a motor with adjustable timing