GEPRC=Great quads. I had to come back and add this. Give this guy a thumbs up please. I mean look he does a great thorough job and it doesn't take long to do it.
Dshot 300 and 4K 4K pid loop are recommended when running RPM filtering, so I guess they’ve set that up (couldn’t see the filters tab though). Thanks for the video 👍 I’ve just got this frame for use with a full size air unit
It’s not necessary to turn on telemetry on the configuration page for the DJI goggle OSD to work. I’ve recently found that it’s not even necessary for transmitter telemetry if you are using F-Port. This frame was my first DJI build but mine has the full size air unit. Tip: If you are using the DJI remote, put buzzer and pre-arm mode on the same switch and position. Put return to home on that same switch, but the last position. You can’t arm unless the beeper is on. The beeper reminds you to turn off pre arm after arming. The pre arm mode only allows one arm until toggled. By putting return to home on the same switch but last position, you get three modes grouped on to only one channel.
This looks very good.everything looks so clean.not many 6s in our group but they flew one and loved it.batterys bit pricey though especialy the amount of crashes my group have lol.that would mean working overtime lol.
Thanks for your work Lee! A really good topic that I’d love to see you do a video on is details for connecting mission planner to pixhawk via crossfire WiFi. I know it is possible but I’m having a terrible time getting it to work!
Painless360 interesting, I’ve watched all you crossfire videos several times and haven’t cought it 🤔. Would you happen to remember which one it was? I would like to have mavlink over WiFi using crossfire.
I think one of the main selling points for me are the spare parts. Especially a spare arm or two. Very nice quad. To be picky I'd wonder about the wisdom of the capacitor hanging out on the side. (I've seen this before fail in crashes) Also the vista unit at the rear of the quad rather than upfront. I see the issue here is antenna length. However longer ones are available. Then a separate battery powered buzzer could be added. Allowing room for the capacitor to be completely protected by the frame. Looks more of a cruiser than an acrobatic tank.
oh man, i wanted one of these even before they added GPS, now I gotta have it! Too bad I dont see an analog version with GPS :( Cant wait for the compass/iNav video though, I want to do my first build that way! Thanks as always!
Hi ? Painless 360 I have two Geprc quads and I have never had a problem with either one. I would like to have this one for short distance flights and use INAV for great looking videos like your"s. Thanks again for the video and review
Great video and review I'm looking at either getting this or the iflight Nazgul5 HD 4s as my first 5"drone. Is there one you would favour over the other?
@@ak-lk2nq I actually ended buying protek35 hd and a babyhawk 2 hd that I both love especially babyhawk 2. Great flight time so nimble and really really quiet. Protek35 is a beast although flight time with GoPro not that great in all honesty.
looks like a nice little quad...too bad it's DJI equipped...maybe a version with a system I can fly with my analog friends without having to do special dances to fly together will be available or pretty sure I can find just a frame to build out...
the quad link says, camera is Nebula nano v2. If I buy pnp i.e without receiver, will I be able to fly with dji controller without adding any receiver ?
Pretty sweet flying, Lee! 😃
Really beautiful quadcopter! I always loved that frame! 😃
Great review, as always!
Stay safe there with your family! 🖖😊
GEPRC=Great quads. I had to come back and add this. Give this guy a thumbs up please. I mean look he does a great thorough job and it doesn't take long to do it.
this frame is beautiful
Dshot 300 and 4K 4K pid loop are recommended when running RPM filtering, so I guess they’ve set that up (couldn’t see the filters tab though). Thanks for the video 👍 I’ve just got this frame for use with a full size air unit
It’s not necessary to turn on telemetry on the configuration page for the DJI goggle OSD to work. I’ve recently found that it’s not even necessary for transmitter telemetry if you are using F-Port. This frame was my first DJI build but mine has the full size air unit. Tip: If you are using the DJI remote, put buzzer and pre-arm mode on the same switch and position. Put return to home on that same switch, but the last position. You can’t arm unless the beeper is on. The beeper reminds you to turn off pre arm after arming. The pre arm mode only allows one arm until toggled. By putting return to home on the same switch but last position, you get three modes grouped on to only one channel.
This looks very good.everything looks so clean.not many 6s in our group but they flew one and loved it.batterys bit pricey though especialy the amount of crashes my group have lol.that would mean working overtime lol.
Thanks for your work Lee! A really good topic that I’d love to see you do a video on is details for connecting mission planner to pixhawk via crossfire WiFi. I know it is possible but I’m having a terrible time getting it to work!
I covered that in my Crossfire series... I hope that helps
Painless360 interesting, I’ve watched all you crossfire videos several times and haven’t cought it 🤔. Would you happen to remember which one it was? I would like to have mavlink over WiFi using crossfire.
The big cinego wow that thing is huge
Top my friend goooood quad 👌👍😉
Love it looks great lee.
I think one of the main selling points for me are the spare parts. Especially a spare arm or two.
Very nice quad.
To be picky I'd wonder about the wisdom of the capacitor hanging out on the side. (I've seen this before fail in crashes)
Also the vista unit at the rear of the quad rather than upfront.
I see the issue here is antenna length. However longer ones are available.
Then a separate battery powered buzzer could be added. Allowing room for the capacitor to be completely protected by the frame.
Looks more of a cruiser than an acrobatic tank.
oh man, i wanted one of these even before they added GPS, now I gotta have it! Too bad I dont see an analog version with GPS :( Cant wait for the compass/iNav video though, I want to do my first build that way! Thanks as always!
Is it possible to record 4K 4:3 superview on Gopro without props in the view? Thank You for a great video.
Taken from Banggood.
Features:
The perfect match DJI FPV Air Unit
3D printing parts are fixed and protected
No propeller in the view
Hi ? Painless 360 I have two Geprc quads and I have never had a problem with either one. I would like to have this one for short distance flights and use INAV for great looking videos like your"s. Thanks again for the video and review
thank you great channel .. just question what do you do with all these quads after review ??
Some are kept, most are passed on through draws for charities, prize draws etc.
@@Painless360 im beginner in Ireland and need a 5 inch thats why im asking 😀. Thank you
Great video and review I'm looking at either getting this or the iflight Nazgul5 HD 4s as my first 5"drone. Is there one you would favour over the other?
hi what did you u end up buying ? and why :)
@@ak-lk2nq I actually ended buying protek35 hd and a babyhawk 2 hd that I both love especially babyhawk 2. Great flight time so nimble and really really quiet. Protek35 is a beast although flight time with GoPro not that great in all honesty.
Just getting things ready to take half the group out today.half tommorow weather permitting.happy flying.😁
Happy flying!
Happy flying, dude! 🖖😊
Its a pitty there’s a bit of props in view, I’m considering to build on this frame
honestly for the price you get an awful lot. to have gps, the crossfire nano rx this is a great quad... this might be the one i get next
Lee, did you try Rtl? Seems gps without compass.
Betaflight GPS recovery mode doesn't use the compass..
Can you fly this lithium ion battery if yes which rating if battery and how long is the flight?
looks like a nice little quad...too bad it's DJI equipped...maybe a version with a system I can fly with my analog friends without having to do special dances to fly together will be available or pretty sure I can find just a frame to build out...
The other version linked in analogue ;)
the quad link says, camera is Nebula nano v2. If I buy pnp i.e without receiver, will I be able to fly with dji controller without adding any receiver ?
If it is the DJI version you get and you have a DJI FPV controller then you can pair it with the air unit as normal.. Happy flying!
@@Painless360 it just says pnp in description with nebula nano v2 camera
Video tranmitter says my VTX is not configured or not compatible. Just unboxed mine.
Can i run this drone with any remote controller? Does it matter about control performance?
This specific one needs the DJI FPV controller..
oh what equipment (tx, googles, etc..) where u using or prefer?
This has the DJI HD system installed so I'm using the DJI HD FPV goggles and the DJI FPV controller.. Happy flying
Ty vm!
Must be good if you are addicted that quick and swapping your main.
The DJI daily has been a 4" model and this gives longer flight times... Happy flying
@@Painless360 how long is the flight time ?
Hi can you tell me the betaflight version please
Dump and Diff all in the description with all the version and setting information. Best of luck!
Can you flash iNav on this ?
With the addition of a compass...
@@Painless360 this GPS don't have compass ?
How to add compass ?
does the FC have a baro? Thanks!
If it does you'll see it in the BF setup...