And guys this is not an affiliate link in the video. I do not make a penny from any purchases. This is just me informing you guys of a damn good spray mask. 🧡
I love this dude channel! He interact with his subscribers, and gives honest reviews. Unlike other painting channels that push nothing but the expensive products triggaman push the products that works and im surprised this channel not a lot bigger than what it is. Keep doing your thang trigga
Back when I mixed paint we had a custom mural painter who painted in his garage w/o respirators. We found him on the floor, passed away from the fumes. Back then it was only face, not full face. Glad to see technology advancing. I'm going to order one!
Man sorry to hear that. Technology definitely has come a long way unfortunately it comes at a pretty steep price but considering the price we paint for all of these spray guns that we don't even need it's really not that bad in comparison.
Thanks Triggerman for reminding me about this stuff. Sometimes with DIY we overlook the safety aspects. After completing my first restoration 65 GTO I spent few days coughing all sorts of nasty stuff and my nose was clogged with it as well. I used a cheap respirator mask and no eye protection. Will get this mask when ready for my next project 65 Barracuda. Thank you for your content. Awesome channel!👍👍
Appreciate your wisdom triggerman! I'm exterior/interior painter. I definitely have started taking interior spraying way more seriously this past years. So i'll definitely grab one of those and add it to my arsenal.
You are RIGHT about absorption of chemicals into the membranes of the eyes. I taught paint shop safety for about 20 years while working for the state DNR. I used to tell guys who were not using proper protection that they were going to get a "PHD" from doing that. I'd ask them if they knew what a PHD was, and they'd always look at me really confused, and say "no sir". Then I would tell them "a PHD stands for PERMANENT HEAD DAMAGE. That's what's going to happen if you keep exposing yourself to diisocyanate (the activator in clear), because it's a nerve damaging agent and once you're messed up, it's irreversible". They started using their gear after that point 😂😂
Good man, glad they listened. I'm sure you saved lots of guys from damaging their bodies. It's a rewarding trade but can come at a cost if not done safely. Thank you man. I really appreciate your input. 🫡
Thanks for the info and bringing it to the forefront. - especially to the DYI. As a reminder, make sure you use the correct filters for paint. I see some RUclipsrs use a mask with the wrong filters thinking that they're protecting themselves, along with no eye protection. Maybe you won't die, but your lungs are easily damaged and can't be repaired. It ain't no fun being hooked to an oxygen tank 24/7.
Great video Triggerman! I too have lost alot of friends and coworkers to cancer. Male and female. Absorption and inhalation are the root causes. I useto live reckless too. Sanded, primed and painted without any PPE. No gloves, coveralls, respirator or dust masks. Cleaning my hands with thinners, reducers or alcohol to remove whatever came in contact with my skin. I agree with you on whatever respirator works for you. Use it. I too have used all types of respirators. I useto have a 3M version of the mask that now fits your needs. My issue with them are I'm blind as a bat without my glasses. Lol. The prescription inserts will always fog up. My prescription glasses would always break the seal around my face no matter how tight the straps are. You're right about the versaflo helmet. It's not for everyone. I only use mines for sanding. I use the disposable paper papr hoods. So much lighter.
Thank you for chiming in sorry to hear about the co-workers you lost. Unfortunately the three guys I know that were spraying recklessly They didn't even make it to cancer They went straight to Oregon failure kidneys liver failed all of their limbs and face tripled in size that was horrible and this was an immediate result of no mask and or limited protection. It was awful 1 of the guys I was in Vocational school with that one hurt the worst. And like you said when I was younger did stupid shit not knowing the extent of the damage that can be done. Luckily we lived long enough to make some changes before it's too late. 🧡💪🏼
Hi trigger. Thank you so much for sharing this information and message. This is basic and first tip before you even want to start using spray gun. Im just a hobby painter. Repainting my stuff 2-3 times in a month. But I love painting process. From preparing to spraying glass finish. Just I said. This is my free time hobby. I always used half face mask without glass. But thank you so much for information and suggesting this mask. I immediately bought it. Thaaanks
Man I love this guy amazing work amazing knowledge whole lotta respect for you my brother once again thank you for sharing your professional high level work, guidance and tips and tricks with us
Sounds good. Let me know how you like it. It's not an affiliate link or anything I don't make a dime Just want you guys to be safe out there. But keep me posted 💪🏼
Mista Trigga you taught me i never knew about eyes bringing in that much makes sense just never tought about it i guess but will in the future thanks for schooling me and us all that never really thought about it so we can stay and watch your videos longer 😅😅😅😅 really thanks i learned i hope other do as well
You're more than welcome. Yes some of these guys come into the comments and talk shit about me not wearing a paint suit yet they're spraying with a half face mask and their eyes are sending chemicals straight through their liver and kidneys Then they go and get drunk on the weekends more toxic chemicals through there liver and kidneys and they want to beat me up about not wearing a paint suit 💀🤣🤣 The trolls still remain undefeated 🤷🏼♂️
Double stack, hmm. Rough neighbourhood Trigger? Haha. Wow, nice mask. Eyes and lungs are a very sensitive part of your body, only get one set and they have to last. I keep a spreadsheet of cool stuff like this and just added this mask. Next time I'm buying paint supplies I'll pick one up.
Remember the parkland school incident? I live 5 minutes from there and that's on the list of the safest neighborhoods in Florida. Beautiful area and looked what happens. And my job is in pompano Beach on Dixie highway just Google that area and your mouth will drop. But I've carried daily for 20+ years. I can't even remember that last car I painted without it on me. And yes double stack G19 gen 5 😧🤓💪🏼🧡 I keep my boss and coworkers safe. I'm just a protector over those I care about.
@@gofastwclass yeah man, literally 5 minutes from my house. But I've always been on a swivel. I do personal bodyguard work and armed security few months out of the year so it's just natural at this point.
Hi Trigger, fantastic video bro it's just the sort of thing that need to be discussed more often, you only get one life so there is no sense in shortening it for your occupation as the company you work for won't thank you for it. That mask you have there looks really nice and seems to be top quality so the manufactures are thinking about your health👏 My mask is also a very good one it's the Sundstrom SR 200 (same as the Gunman's but newer) which can be an airfed, cartridge mask or both if you use both then if there is a problem with the air supply it will switch over to the cartridge, I'm not sure what the visor is made of but it's some kind of perspex (with no tear off's) that you can clean with thinners and it doesn't mark it, there is also a glass visor available. Just don't gamble with your life people and buy the best you can afford, I paid £380 for mine and it was worth every penny👌👍John UK
Eyes are directly connected to your brain so it makes sense. Looks cool! I like the versa flow but the chemical resistant lenses don’t last that long and everything about it is expensive. Definitely what I’ll be looking into getting when I go to cars. I have a few times sprayed a little in a booth with no mask because I forgot the mask and just wanted to get it done to get home. Crawling out of a boat 100 times sucks.
Man trigger about that life 😂😂 man dude you dropped some knowledge on this one here I got to get that full face mask and that paint coat is tooooooo clean 🔥🔥🔥🔥
I don't paint, but I do weld - 1st priority for me is a mask I can see through. I want to see good. I'm betting a painter needs to see even better - this Drager looks to be the bomb.
You just found me? Man where have you been the last 20 months 🤣 this is what I use, TranStar 👇🏼 www.amazon.com/dp/B004QQRA7A/ref=cm_sw_r_as_gl_apa_gl_i_C305SQ1G335A9G16MAHW?linkCode=ml2&tag=thetriggerman-20
Salesmen make commission lol I ain't getting nothing for this. But if it helps to keep you guys safe then that's more rewarding than any amount of money. Hope you enjoy it please report back and let me know how you like it 💪🏼
Dang, you spying on me man. lol. This is exactly what I was looking into today. I am using a 3M mask with a pair of goggles. Hard to see out of the goggles.
I'm not sure bro, only place I see it being an issue is where the lenses go to your ear, but that double rubber seal is strong so it might give you a good seal.
@@kennoland5319 that I'm not sure. If it's the frame of the glasses I think the rubber seal on this thing is strong and would seal over a frame. But I can't say with certainty. It's the usually with my facial hair I can always still smell a small trace amount of fumes but with this I couldn't smell anything at all. So it sealed over my facial hair pretty good.
@@thetriggerman954 Thank you. I just bought new glasses and I always try to make sure safety glasses fit over them. otherwise I would need prescription safety glasses also. But I have the same problem with my glasses because they're plastic lenses and the overspray just wrecks them and you cant clean them. I know just get contacts. thanks trigger
I recently bought one (Xplore 5500) but hadn't realised they did a version with glass. Mine is plexiglass. I might see if Drager can supply a glass visor because I think they can be swapped out. The thing that concerns me somewhat is knowing how often to change the filters...
@@rawhidewesthoggers6310 as far as I know they are specific to their brand of filters. But there could be aftermarket cartridges. Not sure on that. But 3M filters do not fit.
@@thetriggerman954 thank you for the quick reply. I too, have painted cars for about 30 years. I’ve used all sorts of full face masks, including forced air masks. I’ve had a tendency to fall back on the 3 M, due to the accessories being readily available through my job. However, I’m always down to try something new and quite frankly less expensive.
@@rawhidewesthoggers6310 I agree 💯 I always use the 3M because I can get the cartridges everywhere. I asked my rep if he can just order me replacements for my mask biweekly so I'll always have a fresh set. But we'll see how that goes.
First and foremost great video brother Definitely gonna look into that mask and yea I can't wear the space suit😂 And don't mind this😂 Also I tried that transtar waterborn cleaner I like it just as good as ppg sx350 Also I see when you did yilour melt you didn't remove the trap door? I've always removed it b4 I melted it
Hey Trigger, great content man. I'm looking into it. When you order, does it come with cartridges or are those separate? I went into the website but I didn't see them there. Thanks man, have a great weekend.
I believe the cartridges may be separate, they have different types for different needs so it would have to be specifically for what you need. Great question though and I'm going to research it now and try to add a link for them. Thank you
I have that 3m full face also, but got the tear offs too late. Do you have a suggestion on what to use to clean off the shield? I'm afraid to use lacquer thinner or acetone. Thanks! I'll probably have to grab this drager, when I can.
Nothing can clean that plastic. I've ruined maybe three of them I tried everything from compound, reducer, rubbing alcohol nothing works. Maybe a subscriber has had better luck and can chime in here. ANYBODY???
@@funfun8095 If it is already ruined, maybe try a headlight restoring compound or even toothpaste(pick your own flavor) to see if it works. Try a corner where not in your direct vision.
HELL YES MAN, good of you to warn people at the end to mention what happens to the "cowboys" out there who don't mask up when shooting! They pay the ultimate price after years of exposure!
Thank you sir, crazy thing is one of the guys it didn't even take him a year, he started painting and within a year organs failed. Kidneys and liver he swole up 3 times the size as his normal self. Last time I saw him it was walking out of a home Depot in Fort Lauderdale I could barely recognize him I was like "wyclef" is that you He can barely speak I said the paint is killing him. Went by his home a few months later and his wife said that he passed. Little kids running around the house. It's horrible man.
Same thing with me. I always Smell a slight bit of paint which is always in the back of my head. So glad I found this mask. I can't smell anything with this even with the beard.
@@gregoryjowers3629 my normal mask I wear is 402 grams this one was like 490 grams I said it in the video I forget the exacts at the moment but it's not much heavier than the half mask. Some guys complain and say some spray guns are heavy so I guess it depends on the guy. It's not heavy at all for me. Especially when it's strapped to your face. It doesn't feel like it wants to pull your head forward or anything.
@@thetriggerman954 well explained I wear one every now and then at work I have always wear 3m pro half mask but your right about your eyes.i took several safety classes one instructor was asked could you get aids from a person accidentally spit while talking or sneezing and they had hiv and it got in your eyes could you get hiv and he said it was possible cause your fluid around your eyes can absorb at a faster rate he explained to us which was 20yrs ago
Lol not this time. I wanted people to take this video a little serious. So no trigger troll and nobody's girlfriend on this one This is just one for us guys 💪🏼🧡
OK, now say, "Luke, I am your Father!" so we can see how you sound in it. 😁😆 You're right about the eyes as a point of entry. Isocyanates in the hardener seek out moisture to complete the catalyzation process, and the eyes are right there, front and center in the vapor cloud coming off the gun. All too often I grab a half mask and think to myself, "Ehhh...it's just a small job. No need to break out the full face." Not good tho. Same during mixing, you can even smell the difference in the paint once it's catalyzed, and before you pour it into the cup. Definitely not good stuff to breathe. 😵😵💫😧
My main man Beach City in the house. Yea man I've done that countless times. Just a quickly let me just throw this half mask on our better yet hold my breath while I put a coat on. I think we're all guilty to some extent. Thanks for chiming in brother 👊🏼
@@thetriggerman954 im 47 right now the paint gun ive bought most expensive 200 not saying it not worth it but the diy like myself might baulk at the price and go cheaper for something thats just as good if not better...people like me the everyday guy aint got 300 bones for a mask lol
This video really has me thinking I’ve noticed I always feel like crap after spraying clear. I also wear reading glasses it would be nice to have a mask to cover my glasses following the wet line without them on sucks! I would think as long as the respirator part seal good a little leakage around the glasses arms would be okay?
@@timhudson8958 this rubber seal on this mask is so strong it's hard to explain how sealed this thing is. It's the first mask that completely seals my beard and I smell absolutely nothing. It's night and day from those regular silicone masks. This is the same material that are on the firefighters and first responders masks. It's night and day bro. So I would think that the thin part of the glasses that go around your ear would be sealed pretty good.
And guys this is not an affiliate link in the video. I do not make a penny from any purchases. This is just me informing you guys of a damn good spray mask. 🧡
That's all we care about. Thanks for the info. If it good for you then I'm getting one for sure.
@@chriskiefer8365 more then welcome Chris 🫡💪🏼🧡
Appreciate You 🙏🏽
Great advice triggerman to painters out here
Been painting since 1980 dude and I'm still here enjoying life
You take care
@@claremontinteriorsmw thank you sir. And Amen to that. Play it save and live a long good life. 💪🏼🙏🏼
I love this dude channel! He interact with his subscribers, and gives honest reviews. Unlike other painting channels that push nothing but the expensive products triggaman push the products that works and im surprised this channel not a lot bigger than what it is. Keep doing your thang trigga
Thank you Supafly, I haven't even been on RUclips 2 years yet I'm getting there man 🥹 and thank you for the kind words. I appreciate the support 🙏🏼🧡
Agreed
Youre the realest tho @thetriggerman954
Great pro tip!!! Thank you! Not only do you show how the job is done the right way. You show how to do it safely. Great video! Thank’s again!
@@samuelramirez3183 or more than welcome Samuel Glad you enjoyed the video man. Be safe 🙏🏼💪🏼
Back when I mixed paint we had a custom mural painter who painted in his garage w/o respirators. We found him on the floor, passed away from the fumes. Back then it was only face, not full face. Glad to see technology advancing. I'm going to order one!
Man sorry to hear that. Technology definitely has come a long way unfortunately it comes at a pretty steep price but considering the price we paint for all of these spray guns that we don't even need it's really not that bad in comparison.
Thanks Triggerman for reminding me about this stuff. Sometimes with DIY we overlook the safety aspects. After completing my first restoration 65 GTO I spent few days coughing all sorts of nasty stuff and my nose was clogged with it as well. I used a cheap respirator mask and no eye protection. Will get this mask when ready for my next project 65 Barracuda. Thank you for your content. Awesome channel!👍👍
Sounds good. When you are ready even if you don't get this make sure you protect those eyes 👀 🙏🏼
@@thetriggerman954 Definitely gotta project those eyes. Thank you sir Triggerman 👍
Thank you, sir. I do tub refinishing, and this would be great!
Looks slick, no apparent distortion from the curve of the glass. Nice!
I think it makes painting so much easier to see straight!💪🏼🙌🏼
Appreciate your wisdom triggerman! I'm exterior/interior painter. I definitely have started taking interior spraying way more seriously this past years. So i'll definitely grab one of those and add it to my arsenal.
💪🏼🫡 glad you see the value.
You are RIGHT about absorption of chemicals into the membranes of the eyes. I taught paint shop safety for about 20 years while working for the state DNR. I used to tell guys who were not using proper protection that they were going to get a "PHD" from doing that. I'd ask them if they knew what a PHD was, and they'd always look at me really confused, and say "no sir". Then I would tell them "a PHD stands for PERMANENT HEAD DAMAGE. That's what's going to happen if you keep exposing yourself to diisocyanate (the activator in clear), because it's a nerve damaging agent and once you're messed up, it's irreversible". They started using their gear after that point 😂😂
Good man, glad they listened. I'm sure you saved lots of guys from damaging their bodies. It's a rewarding trade but can come at a cost if not done safely. Thank you man. I really appreciate your input. 🫡
Looking like Alf. Classic. Great info!
@@runningman00900 😁🤣 thank you brother 🧡
Thanks for stressing the safety aspect. Always Looking out for us little guys 👍
Good information for everyone! Thanks Trigger
This man is a game changer for me..
Thanks for the info and bringing it to the forefront. - especially to the DYI. As a reminder, make sure you use the correct filters for paint. I see some RUclipsrs use a mask with the wrong filters thinking that they're protecting themselves, along with no eye protection. Maybe you won't die, but your lungs are easily damaged and can't be repaired. It ain't no fun being hooked to an oxygen tank 24/7.
@@BigBlueMotors more than welcome. And you're right, especially for the DIY guys. One paint job could cost life changing health issues 🧡🫡
Hell yeah good shit Im in the market to buy the 3m versaflo now you put me on drager about to check them out
Yeah check them out and compare and see which works best for you. Thank you for watching.
Great video Triggerman! I too have lost alot of friends and coworkers to cancer. Male and female. Absorption and inhalation are the root causes. I useto live reckless too. Sanded, primed and painted without any PPE. No gloves, coveralls, respirator or dust masks. Cleaning my hands with thinners, reducers or alcohol to remove whatever came in contact with my skin. I agree with you on whatever respirator works for you. Use it. I too have used all types of respirators. I useto have a 3M version of the mask that now fits your needs. My issue with them are I'm blind as a bat without my glasses. Lol. The prescription inserts will always fog up. My prescription glasses would always break the seal around my face no matter how tight the straps are. You're right about the versaflo helmet. It's not for everyone. I only use mines for sanding. I use the disposable paper papr hoods. So much lighter.
Thank you for chiming in sorry to hear about the co-workers you lost. Unfortunately the three guys I know that were spraying recklessly They didn't even make it to cancer They went straight to Oregon failure kidneys liver failed all of their limbs and face tripled in size that was horrible and this was an immediate result of no mask and or limited protection. It was awful 1 of the guys I was in Vocational school with that one hurt the worst. And like you said when I was younger did stupid shit not knowing the extent of the damage that can be done. Luckily we lived long enough to make some changes before it's too late. 🧡💪🏼
@@thetriggerman954 Sorry for your loss as well. Keep up the good work with content. I appreciate your time and effort put into your videos.
@@Mr.Bell229 thank you Mr Bell. 💪🏼🧡🫡
Hi trigger.
Thank you so much for sharing this information and message.
This is basic and first tip before you even want to start using spray gun.
Im just a hobby painter. Repainting my stuff 2-3 times in a month. But I love painting process. From preparing to spraying glass finish. Just I said. This is my free time hobby. I always used half face mask without glass. But thank you so much for information and suggesting this mask. I immediately bought it. Thaaanks
@@Rikats15 more than welcome brother. I'm glad you enjoyed the video and I hope you enjoy the mask even more. Stay safe 🙏🏼💪🏼
Drager also makes scuba equipment, they make quality gear. Keep up the great videos,as a diy guy I’m learning a lot. Thank you!
Right? They're the real deal, and I really appreciate you watching my videos! 💪🏼
Draeger make so much more than masks & scuba gear. Worldwide company with their fingers in lots of pies…
Draeger make lots of equipment. Worldwide company with their fingers in lots of pies…
DONT PLAY WITH TRIGGER, yall know that was his second clip the other one was already in the 🔫😂
🤫 I can't tell you the last time I painted a car without it on me. Maybe 20 years ago I forgot it one day. 🫠
💥
@@89notch 😉🤫😂
Thanks for the great video on the Drager mask. I spray in my garage and that mask looks like it is really well designed. Certainly going to buy one. 👍
You're more than welcome bro. I hope you enjoy it as much as I am
@@thetriggerman954 Is the glass easy to clean the overspray? Do you use isopropyl alcohol with a micro fiber towel? What do you recommend? Thank you 🙏
Thank u TriggerMan we appreciate u safety first always 💪🏽💪🏽💪🏽💪🏽God Bless🙏🏽🙏🏽🙏🏽
@@richarcruz7843 you're more than welcome my man. And thank you for the support 🙏🏼🧡
Man I love this guy amazing work amazing knowledge whole lotta respect for you my brother once again thank you for sharing your professional high level work, guidance and tips and tricks with us
@@The_paintman you're more than welcome paintman 🧡🫡 I'm glad you're enjoying the content 🥳
Thanks Man, Ordered mine right away.
Sounds good. Let me know how you like it. It's not an affiliate link or anything I don't make a dime Just want you guys to be safe out there. But keep me posted 💪🏼
Thanks Triggerman! Looks like it’s worth every penny 🎉
Yes sir worth every dime. 💪🏼🙌🏼
Mista Trigga you taught me i never knew about eyes bringing in that much makes sense just never tought about it i guess but will in the future thanks for schooling me and us all that never really thought about it so we can stay and watch your videos longer 😅😅😅😅 really thanks i learned i hope other do as well
You're more than welcome. Yes some of these guys come into the comments and talk shit about me not wearing a paint suit yet they're spraying with a half face mask and their eyes are sending chemicals straight through their liver and kidneys Then they go and get drunk on the weekends more toxic chemicals through there liver and kidneys and they want to beat me up about not wearing a paint suit 💀🤣🤣 The trolls still remain undefeated 🤷🏼♂️
Thanks for the info, always looking for the perfect mask
@@3rekoatskustoms929 you got it bro 🫡💪🏼
Double stack, hmm. Rough neighbourhood Trigger? Haha.
Wow, nice mask. Eyes and lungs are a very sensitive part of your body, only get one set and they have to last.
I keep a spreadsheet of cool stuff like this and just added this mask. Next time I'm buying paint supplies I'll pick one up.
Remember the parkland school incident? I live 5 minutes from there and that's on the list of the safest neighborhoods in Florida. Beautiful area and looked what happens. And my job is in pompano Beach on Dixie highway just Google that area and your mouth will drop. But I've carried daily for 20+ years. I can't even remember that last car I painted without it on me. And yes double stack G19 gen 5 😧🤓💪🏼🧡 I keep my boss and coworkers safe. I'm just a protector over those I care about.
@thetriggerman954 Forgot about it, just looked it up. That was a bad deal.
@@gofastwclass yeah man, literally 5 minutes from my house. But I've always been on a swivel. I do personal bodyguard work and armed security few months out of the year so it's just natural at this point.
@thetriggerman954 you're a badass, smart and kind too!
@@kirkwilson5900 thank you man. In try to be a good person. Until I'm pushed 🤷🏼♂️😉😆
Hi Trigger, fantastic video bro it's just the sort of thing that need to be discussed more often, you only get one life so there is no sense in shortening it for your occupation as the company you work for won't thank you for it. That mask you have there looks really nice and seems to be top quality so the manufactures are thinking about your health👏
My mask is also a very good one it's the Sundstrom SR 200 (same as the Gunman's but newer) which can be an airfed, cartridge mask or both if you use both then if there is a problem with the air supply it will switch over to the cartridge, I'm not sure what the visor is made of but it's some kind of perspex (with no tear off's) that you can clean with thinners and it doesn't mark it, there is also a glass visor available.
Just don't gamble with your life people and buy the best you can afford, I paid £380 for mine and it was worth every penny👌👍John UK
Exactly john no need to roll the dice on your life 🎲🎲 💀
Trigger Man, your bad ass, thanks for showing this man 👍
@@DennisCrissSr. Thank you Dennis. Glad you Enjoyed 💪🏼🧡
Eyes are directly connected to your brain so it makes sense. Looks cool! I like the versa flow but the chemical resistant lenses don’t last that long and everything about it is expensive. Definitely what I’ll be looking into getting when I go to cars. I have a few times sprayed a little in a booth with no mask because I forgot the mask and just wanted to get it done to get home. Crawling out of a boat 100 times sucks.
Yeah those plastic lenses don't last and they distort your vision " slightly"
Man trigger about that life 😂😂 man dude you dropped some knowledge on this one here I got to get that full face mask and that paint coat is tooooooo clean 🔥🔥🔥🔥
Yeah man you know these people out here sick, and some need this medication. But the mask is top tier never had anything like it man 💪🏼🧡
I don't paint, but I do weld - 1st priority for me is a mask I can see through. I want to see good. I'm betting a painter needs to see even better - this Drager looks to be the bomb.
It is man, best mask I've ever had.
@@thetriggerman954 You had me at the camera inside the mask looking through, Trig. Clear as.
@@jamesward5721 🙌🏼🙌🏼
What kind of edge blender do you use/recommend? I just found your channel and absolutely love it
You just found me? Man where have you been the last 20 months 🤣 this is what I use, TranStar 👇🏼
www.amazon.com/dp/B004QQRA7A/ref=cm_sw_r_as_gl_apa_gl_i_C305SQ1G335A9G16MAHW?linkCode=ml2&tag=thetriggerman-20
triggerman should be renamed to salesman. 🤣. made me buy one so quick. been only using half-masks. gonna give the full face a try.
Salesmen make commission lol I ain't getting nothing for this. But if it helps to keep you guys safe then that's more rewarding than any amount of money. Hope you enjoy it please report back and let me know how you like it 💪🏼
Very clear!
@@v65wings45 extremely 😉💪🏼💪🏼
Wonder if the eye absorption is why I feel a bit high after spraying. LOL Reminds me of drugs in movie Looper.
It's definitely why. It's like drinking alcohol/ chemical same thing
Dang, you spying on me man. lol. This is exactly what I was looking into today. I am using a 3M mask with a pair of goggles. Hard to see out of the goggles.
Then there you have it man. Right on time 💪🏼🧡
Nice looking mask…
💪🏼🫡
Do you think the mask will fit prescription glasses?
I'm not sure bro, only place I see it being an issue is where the lenses go to your ear, but that double rubber seal is strong so it might give you a good seal.
Is that mask glasses friendly?
Not sure bro. I reached out to the company waiting to see if they respond.
@thetriggerman954 thanks bro!! I appreciate 🙏 you.
I'm assuming all will be good as long as they fit within the confines of the mask. Being a spectacles wearer myself this certainly is relevant.😜😛
@@bernardkroeger4045 🤓
@thetriggerman954 any word back on if this mask is glasses friendly. Thanks!
I've put off buying a full face mask because I wear glasses. Do you think the full face mask would work with glasses?
@@kennoland5319 that I'm not sure. If it's the frame of the glasses I think the rubber seal on this thing is strong and would seal over a frame. But I can't say with certainty. It's the usually with my facial hair I can always still smell a small trace amount of fumes but with this I couldn't smell anything at all. So it sealed over my facial hair pretty good.
@@thetriggerman954 Thank you. I just bought new glasses and I always try to make sure safety glasses fit over them. otherwise I would need prescription safety glasses also. But I have the same problem with my glasses because they're plastic lenses and the overspray just wrecks them and you cant clean them. I know just get contacts. thanks trigger
@@kennoland5319 💪🏼🧡
You answered my question! Thank you!@@thetriggerman954
I recently bought one (Xplore 5500) but hadn't realised they did a version with glass. Mine is plexiglass. I might see if Drager can supply a glass visor because I think they can be swapped out. The thing that concerns me somewhat is knowing how often to change the filters...
Yes they can be swapped out. Contact the customer service and get the right part number but it definitely can be swapped out.
Wonder how it works for us eyeglass wearing painters?
Maybe I should put on some glasses and try it 🤔
Please do. So many of us have glasses, and have struggled with sealing. @thetriggerman954
Yo I worked with you at Phil Smith didn't know this was your page
Addline with the white Chevy? Zoe? 🤔🧐
Are the filters interchangeable with other brands or are they proprietary to that mask only?
@@rawhidewesthoggers6310 as far as I know they are specific to their brand of filters. But there could be aftermarket cartridges. Not sure on that. But 3M filters do not fit.
@@thetriggerman954 thank you for the quick reply. I too, have painted cars for about 30 years. I’ve used all sorts of full face masks, including forced air masks. I’ve had a tendency to fall back on the 3 M, due to the accessories being readily available through my job. However, I’m always down to try something new and quite frankly less expensive.
@@rawhidewesthoggers6310 I agree 💯 I always use the 3M because I can get the cartridges everywhere. I asked my rep if he can just order me replacements for my mask biweekly so I'll always have a fresh set. But we'll see how that goes.
First and foremost great video brother
Definitely gonna look into that mask and yea I can't wear the space suit😂
And don't mind this😂
Also I tried that transtar waterborn cleaner I like it just as good as ppg sx350
Also I see when you did yilour melt you didn't remove the trap door? I've always removed it b4 I melted it
Great video, thanks for the information 👍✔️
Appreciate that! Glad you got something out of it. 🙏
TriggerMan where can we be able to buy those paint suits? Thankyou in advance.
lumaiii.com/product/spray-paint-suit/?srsltid=AfmBOooZ0NyE-5SiR7c9ObfR24fmgxrqnOSpDWrw2cR0KxbK0bpjGGkP
Hey Trigger, great content man. I'm looking into it. When you order, does it come with cartridges or are those separate? I went into the website but I didn't see them there. Thanks man, have a great weekend.
I believe the cartridges may be separate, they have different types for different needs so it would have to be specifically for what you need. Great question though and I'm going to research it now and try to add a link for them. Thank you
@@justice5699 amzn.to/40jpEFD
@@thetriggerman954 Thanks
Great video bro
Thank you man. Glad you enjoyed 🫡
Did you put clear on the car before you put on base
🤦🏼♂️ no sir. Lol
I have that 3m full face also, but got the tear offs too late. Do you have a suggestion on what to use to clean off the shield? I'm afraid to use lacquer thinner or acetone.
Thanks!
I'll probably have to grab this drager, when I can.
Nothing can clean that plastic. I've ruined maybe three of them I tried everything from compound, reducer, rubbing alcohol nothing works. Maybe a subscriber has had better luck and can chime in here. ANYBODY???
@@funfun8095 I’ve had nothing work on plastic for me, but maybe you could try clear coating like you would a set of headlights🤣
@@thetriggerman954 Thanks, man. That's what I figured. So, this drager will be safe against isocyanates?
@@bundy9026 👍
@@funfun8095 If it is already ruined, maybe try a headlight restoring compound or even toothpaste(pick your own flavor) to see if it works. Try a corner where not in your direct vision.
Hey trigger, how does that seal around your beard?
Sealed completely. First mask that I actually smell zero fumes. That rubber material is a lot stronger than the normal silicone stuff.
How much does it cost?
@@MissionaryForMexico link in the description I think it was $280 something like that.
HELL YES MAN, good of you to warn people at the end to mention what happens to the "cowboys" out there who don't mask up when shooting! They pay the ultimate price after years of exposure!
Thank you sir, crazy thing is one of the guys it didn't even take him a year, he started painting and within a year organs failed. Kidneys and liver he swole up 3 times the size as his normal self. Last time I saw him it was walking out of a home Depot in Fort Lauderdale I could barely recognize him I was like "wyclef" is that you He can barely speak I said the paint is killing him. Went by his home a few months later and his wife said that he passed. Little kids running around the house. It's horrible man.
@@thetriggerman954 oh damn... that's very sad. Sorry to hear that. Stories like that remind us we gotta be safe. It's definitely not worth the risk.
@@colorbosscustomautobody8140 🧡🙌🏼🙏🏼
Hi Trigger i have a 3m mask but i feel it does not seal good enough since i have a little beard. And i smell the paint.
Same thing with me. I always Smell a slight bit of paint which is always in the back of my head. So glad I found this mask. I can't smell anything with this even with the beard.
@thetriggerman954 thanks man i will try this. I dont paint cars most are helmets but i need the protection
@@joeltorres3202 you got it brother. Hope you enjoy it 💪🏼
Dragger needs to make a cleanable neoprene paint suit. like a scuba suit, but not to tight
You might want to drop that in their suggestion box 🤣
One thing that I believe wasn't mentioned is it comes in two versions, plastic or glass lens with the glass one around $100 more.
The link in left is for the glass version.
Nice full face mask is it heavy vs half mask… later trigger
@@gregoryjowers3629 my normal mask I wear is 402 grams this one was like 490 grams I said it in the video I forget the exacts at the moment but it's not much heavier than the half mask. Some guys complain and say some spray guns are heavy so I guess it depends on the guy. It's not heavy at all for me. Especially when it's strapped to your face. It doesn't feel like it wants to pull your head forward or anything.
@@thetriggerman954 well explained I wear one every now and then at work I have always wear 3m pro half mask but your right about your eyes.i took several safety classes one instructor was asked could you get aids from a person accidentally spit while talking or sneezing and they had hiv and it got in your eyes could you get hiv and he said it was possible cause your fluid around your eyes can absorb at a faster rate he explained to us which was 20yrs ago
Will it work with glasses?
Yes there is a link in the description for the lens kit
hello sir, can you review what the name sealer use??? sealer same or not PP PRIMER name??
ProSpray 2k medium gray sealer
Is that sagola 3300?
No it's the new Sagola 4600
You get a Sub for this Video 💪🏽💪🏽💪🏽🫡🫡I’m buying this ASAP 🔥🔥🔥🔥
Thank you for the sub and enjoy the mask. I'm sure you will love it 💪🏼🥳
how many jobs do you paint a day trigger?
@@cabrezzy7838 anywhere from 2-6 a day
Trigger is it able to ware glass with it I'm half blind
Put on your contacts 😉
I have a mask like that off ebay is that the sagola extreme 4600 1.3
It's not the extreme, it's the newer Sagola 4600 base and clear gun
what filters work on the mask
It's all in the link in the video description
I was wondering if any of the aftermarket filters would fit
Triggerman was I suppose to tell my friend’s girlfriend about this mask?
Lol not this time. I wanted people to take this video a little serious. So no trigger troll and nobody's girlfriend on this one This is just one for us guys 💪🏼🧡
Damm Alf!!!😂
@@andrewarren2701 check out my newest video. I'm actually wearing the Alf mask they sent me one 🫠
💪🏿💪🏿💪🏿
✊🏼💪🏼
I need that asap
@@Superclearuniversity you want that crystal clear glass lens aye
@ mines get fogged up
@@Superclearuniversity you got that plastic you need this fish bowl glass cuzz
Trigger i'm Not going to talk shit about you . But one Question why are you carry a gun clip.
@@ganeshnarayan5505 it's a spare Incase I use up the first one.
@@thetriggerman954 🤣🤣
@@ganeshnarayan5505 😉
OK, now say, "Luke, I am your Father!" so we can see how you sound in it. 😁😆
You're right about the eyes as a point of entry. Isocyanates in the hardener seek out moisture to complete the catalyzation process, and the eyes are right there, front and center in the vapor cloud coming off the gun. All too often I grab a half mask and think to myself, "Ehhh...it's just a small job. No need to break out the full face." Not good tho. Same during mixing, you can even smell the difference in the paint once it's catalyzed, and before you pour it into the cup. Definitely not good stuff to breathe. 😵😵💫😧
My main man Beach City in the house. Yea man I've done that countless times. Just a quickly let me just throw this half mask on our better yet hold my breath while I put a coat on. I think we're all guilty to some extent. Thanks for chiming in brother 👊🏼
if you got the money then get it but 300 dollars ill easily pass on it
What's the most you ever spent on a spray gun? And If you had to put a price on it how much would you say your life is worth?
@@thetriggerman954 im 47 right now the paint gun ive bought most expensive 200 not saying it not worth it but the diy like myself might baulk at the price and go cheaper for something thats just as good if not better...people like me the everyday guy aint got 300 bones for a mask lol
Have you ever googled why you shouldn't trust google searches?? Like the butler pa incident? lol
No but that's at the very top of my list of things to do in 2025 Thank you 💪🏼🫡
😂 he said ALF!
What you know about that ALF 😂😂
lol “looking like Alf”
@@jonledgin5614 👽🛸
Don’t mind this 😂😂😂
😉🤫
Thanks, T. Solvent encephalitis. Solvents seek blood-rich organs.
😳🥹 man didn't even know that. Crazy 😧
be carefull with those masks brother. they might put you back in LOCKDOWN😩😩😩 ''YOU ADAPTED THE DARK, I WAS BORN IN IT'' Bane....
Too much plastic . Not good for 👀 thanks.
💪🏼
This video really has me thinking I’ve noticed I always feel like crap after spraying clear. I also wear reading glasses it would be nice to have a mask to cover my glasses following the wet line without them on sucks! I would think as long as the respirator part seal good a little leakage around the glasses arms would be okay?
@@timhudson8958 this rubber seal on this mask is so strong it's hard to explain how sealed this thing is. It's the first mask that completely seals my beard and I smell absolutely nothing. It's night and day from those regular silicone masks. This is the same material that are on the firefighters and first responders masks. It's night and day bro. So I would think that the thin part of the glasses that go around your ear would be sealed pretty good.