Hey guys I know I had asked If anyone wanted a BEE R install video but shortly after this video was made the truck cake off the road. I no longer run the bee r. I have a standalone ECU. If you follow me on IG and dm me. I can try and find the wiring diagrams used for instal. Thanks guys. Make sure to sub. A lot more v8 content to come.
Hey guys, this video has seemed to gain some traction lately. This truck is currently getting a frame off restoration. The bee r will not be going back in because I am switching engine management. Possibly may put the bee r in my LS400..would anyone be interested in a video on how to wire it in?
What wires are you tapped into to make the Bee*r work? There seems to be nothing online that supports that you can actually use the Bee*r on a stock 1uz ecu. Trying to make this work for my little brothers car lol.
@@4.8Flatbed I don’t know much about them so is there a button you press for it to hold the rpm then after you launch it just knows to turn it off or what
Is the Bee R connected to the stock ecu? It's a stupid question, but I'm asking because I'm looking into doing a "2 step" on my 98 LS400. Where are your dials turned to? Do you have a build list on the motor?
Motor is stock (for now) the dials were changed every time I hit it. This video is about a year old I just decided to post it. The trucks currently getting some goodies, I can try and post an update video when shes back on the road!
my man, I just got one and am having trouble installing it. I have a 93sc400, if you could shoot over any advice on how to correctly wire that would be amazing. I could even pay you if anything too
Bro you got an update on how you wired your bee r up to the 1uz ive had mine months but im still waiting for a reply from you to know were to wire it too
Door got fucked when we were v8 swapping it. Leaning on it a lot lmao. This trucks been fully rebuilt. Frame off resto, cab swap. Looks nothing like this anymore.
When I try to order it says that hub bore on the wheel is too small. Same pattern too with the 6x5.5. Might just be a mistake but wanted to be sure. Clean Hardbody too btw man @@4.8Flatbed
@@4.8Flatbed alright man thanks you wouldn't any tips to what the two wires go to im doing this right now in the rain lol I got it to blink at the correct rev but it goes past that and it dont cut
This truck was a complete train wreck lmao. It basically rotted out. It's gotten a full cab swap since this video. 4 link coilover suspension. Megasquirt ecu in the works as well.
@@4.8Flatbed Nice. I have a 93' HB that I'm boosting the KA24E right now. I did all the body work and repainted last fall, and I lowered it a couple of months ago. I just ordered a Walbro pump, 750cc injectors, and a MSPNP2 on the way after I get the parts in. Your truck sounds good.
![The BEST American Muscle Car Burnouts & Donuts of 2024 [4K]](/img/1.gif)
Hey guys I know I had asked If anyone wanted a BEE R install video but shortly after this video was made the truck cake off the road. I no longer run the bee r. I have a standalone ECU. If you follow me on IG and dm me. I can try and find the wiring diagrams used for instal. Thanks guys. Make sure to sub. A lot more v8 content to come.
I just got a low milage 91 d21 and I feel like I stumbled into one of the most interesting car enthusiast groups out there!
I swear man 😂 I’ve seen Lowriders, drift builds, swaps, turbos, lifts, ect. It’s freakin awesome.
@@blvktonybeats I want to see a Hardbody EV.
Hey guys, this video has seemed to gain some traction lately. This truck is currently getting a frame off restoration. The bee r will not be going back in because I am switching engine management. Possibly may put the bee r in my LS400..would anyone be interested in a video on how to wire it in?
Bro i really need you to do a video or some photos of how to wire a bee r type b into a 1uz
Yes as well for my ls400
Yes I have a 96 ls 400 and would be interested in seeing how all of this is wired up
@@vicbozin8000 would be different for us, this is a 91 ecu which is different than the 96 ecu. Different plugs
@@chrismepsted4846 I will soon
Mean as hell. I love my 1UZ
Me too man I daily a ls400 as well
what a freaking epic swap dude
Did you have to do much cutting to get it to fit in the engine bay? I'm thinking of 1uz swapping mine as well
This is so sick bro, I wish I had a flatbed nissan :c
🤣🤣
Please share how to wire the limiter to ECU or some pictures of how its wired would love to do this for my 1uz Cressida setup!
If you’ve found it out, hit me up on Snapchat @eliandkaylaa and or tiktok @hotboiz31 I got a 1uz SC and I want this😭
Please help me where does that yellow and green wire connect to I'm going crazy 😵
A banger!! Nice
Nice, was the swap difficult? I'm in the process of doing the same swap with both of my d21's, did you custom made engine mounts?
Wasn't the easiest thing, yes on the motor mounts. Theres a lot of things that end up needing to custom in the end.
Thanks..
What wires are you tapped into to make the Bee*r work? There seems to be nothing online that supports that you can actually use the Bee*r on a stock 1uz ecu. Trying to make this work for my little brothers car lol.
My trucks currently undergoing a frame off restoration, next time I'm near my ecu I will get the pins for you!
@@4.8Flatbed thank you! I appreciate it a lot!
@@4.8Flatbed hey man can you help me out I'm doing this right now
Thinking about putting 2 step on my lt4 vette cause I just put a msd distributer on it but it won’t pop much it’ll just be good for launch control
Not a bad idea these are good for launch control. And very easy to set the rev range fo whatever you want with just a twist of a knob
@@4.8Flatbed I don’t know much about them so is there a button you press for it to hold the rpm then after you launch it just knows to turn it off or what
Hey brother so this limiter can be installed in the 1uz I bought one for my 91 ls400 hope it sounds like yours mine is strait piped
You ever figure it out?
Is the Bee R connected to the stock ecu? It's a stupid question, but I'm asking because I'm looking into doing a "2 step" on my 98 LS400. Where are your dials turned to? Do you have a build list on the motor?
Motor is stock (for now) the dials were changed every time I hit it. This video is about a year old I just decided to post it. The trucks currently getting some goodies, I can try and post an update video when shes back on the road!
my man, I just got one and am having trouble installing it. I have a 93sc400, if you could shoot over any advice on how to correctly wire that would be amazing. I could even pay you if anything too
Bro you got an update on how you wired your bee r up to the 1uz ive had mine months but im still waiting for a reply from you to know were to wire it too
Friend Apparently the door is uneven, you can see that it goes down a lot when you open it
Door got fucked when we were v8 swapping it. Leaning on it a lot lmao.
This trucks been fully rebuilt. Frame off resto, cab swap. Looks nothing like this anymore.
How did you make the rim work when it has a smaller hub bore?
What do you mean? The wheels are 6x5.5 same pattern as the truck
When I try to order it says that hub bore on the wheel is too small. Same pattern too with the 6x5.5. Might just be a mistake but wanted to be sure. Clean Hardbody too btw man @@4.8Flatbed
@ANDY-xu3ct 6x139.7 is the actual hub size. You can bore out for other size wheels if necessary.
How you wire it plz
Is it the type B bee r limiter?
Is the truck turbo and what gen 1uz u used
Na/ 1st gen 1991
I need help to connect in my 1uzfe😢😢😢😢😢😢😢
I got a 97 Hardbody I'm building into a pre-runner with a 1000+ hp RB26
What size/brand of wheels and tires are you rocking in this video? I'm looking to put something like this on my '97.
These wheels are discontinued, they are 16x8.5 level 8 punch wheels
@@4.8Flatbed Dangit! Of course they're discontinued... I'm always wanting stuff I can't get lol!
@@Joshrwms87 how do you think I feel hahaha I can't get a replacement if I need one 🥲🥲🥲
what wheel and tire setup are you on? I cant decide on what wheels to get for my hardbody.
They are punch wheels by level 8..discontinued sadly
What wheels are those? Specs?
They are level 8 punch wheels 16x8.5 not sure of offset. They are discontinued can't buy them new anymore
What kind and size of rear poly fenders did you use brother man?
Its a metal trailer fendee cut in 2
Do you still have the bee r wiring diagram?
I do not, this has been in my truck for 3 years or so. Pre v8 as well
I need help to connect
What wires did you hook up for it to work?
Trucks currently being restored, next time I'm near ECU I will update description
@@4.8Flatbed I cannot get it the limitier to cut out I've tried so many combinations
@@YouStanceBro my trucks still in a bunch of pieces, the wiring almost done being put back in the truck. I will update and make a video when its done
@@4.8Flatbed alright man thanks you wouldn't any tips to what the two wires go to im doing this right now in the rain lol I got it to blink at the correct rev but it goes past that and it dont cut
Is it a stock 1uz wit the bee-r rev limiter?
Yes
Yes sir
Custom exhaust from headers back, magna flow muffler.
Has a electronic cutout now as well. Video is about a year old
Is that all you did was put a rev limiter on
Sort of a broad question, what do you mean?
What do you have the settings on the Bee-R at?
I changed it throughout the video
Can I get this 2 step on my stock 1999 ls400 ?? It has 1uz motor vvti tho
I'm not sure about the vvti motor tbh
What wheels are those??
Punch wheels by level 8
Hey guys, check out my most recent video on the 1uz hardbody
Uel the flatbed
What do you mean
What is your Instagram?
All I see is a big dent...
This truck was a complete train wreck lmao. It basically rotted out. It's gotten a full cab swap since this video. 4 link coilover suspension. Megasquirt ecu in the works as well.
@@4.8Flatbed Nice. I have a 93' HB that I'm boosting the KA24E right now. I did all the body work and repainted last fall, and I lowered it a couple of months ago. I just ordered a Walbro pump, 750cc injectors, and a MSPNP2 on the way after I get the parts in. Your truck sounds good.
@@jasonboness3871 hell yeah brother, I have an 87 a 90 that I daily drove. I have a ls400 too.
what wheels are those?
Level 8 punch wheels, they are discontinued