I’m. Urgently researching speaker builds and although I can’t comment on the audio specifications (I’m still learning) I can comment on the workmanship and that is A1. Amazing craft and care to detail on the housing. I’m sure your next speaker will be even better, I hope mine turns out as good as yours.
Pro finish. My suggestion: If you were used sealed back mid drivers, the bass from the sub will be good. In this condition, the mid drivers acted as passive drivers and may damage it. Sorry for my English.
Nice job, if I was being critical, I would have gone for a matt finish on the front, the high gloss cheapens it slightly and the perspex window will be doing nothing to improve the sound. But apart from that well done.
Really great build sir, I wanted to build the same, please suggest that what are the ideal box dimensions if we use the w6 1139sf TB sub, and also port size? Waiting for reply.
Awesome work man, and nice background score. At least you didn't put this trashy EDM in the background like other Indian RUclipsrs, special thanks for that.
One of the best bluetooth speakers built here on RUclips. The only bit missing is you haven't provided with links what and where to buy all the stuff from. I am sure this sounds the best cause it is three way. Mickey if possible please provide a list of the stuff you used and where to buy them? Thanks for uploading.
Amigo, poderia me ajudar no seguinte, fiz uma caixinha de som usando a placa amp tpa3116, mas o problema é que está dando um 'POC' barulho no auto falante quando desligo a chave de energia dela. Eu já tentei quase de tudo, coloquei chave separada para sequência o desligamento, pra desligar o Bluetooth por último, testei no Pac de bateria 16.8v, só na Fonte com 21v, com a placa de sinal de áudio Bluetooth desconectado da placa amp, sempre dá um estralo mais leve quando liga, e quando desliga dá um estralo mais forte nos auto falantes. Sabe como eu poderia resolver esse soco no auto falante? Principalmente quando desliga? Encontrei uma placa de proteção que recebe alimentação, e tem 2 rele , um em cada entrada dela. E retarda a ligação em 3 segundos após alimentação de energia ao ligar. Mas preciso de um que proteja ao desligar pra não dar o estouro no auto falante. Será que esse mesmo tipo de placa resolveria?
Congratulations, great job, I want to make constructive criticism that can help to make your work even better than it already is. In a stereo baffle use a single tweeter for a single channel (L or R) or combine them is not good at all, the middle and high frequencies usually have a well-defined separation between the two channels, however not so at low frequencies, reason why some commercial and professional sound systems have a dedicated baffle for low frequencies; having a single twiteer produces the sensation of a monophonic sound and the loss of general quality; also the speakers of the two channels must be isolated between them and the wofeer. Greetings.
Some more constructive criticism: Since your setup has not a lot of power, your subwoofer is basically obsolete. If you had more power, you would run into problems such as the subwoofer working in the same volume as the middle tone loudspeaker distorting them since the air-pressure will handicap/change their amplitudes and frequency range.
Este foi um dos trabalhos mais perfeitos que vi aqui no Itube, destea modalide muito bom mesmo dava para fazer em serie e vender um bom produto e otimo acabamento, perfeito mesmo parabens!!
Does anyone know the detail on how he extended his bluetooth range? I read that the copper extension wire needs to be a certain length to work, and also that in some cases you need to un-connect part or all of the built in antenna contacts. Can anyone share any detail or insight?
Hi ive just seen your Video and what an excellent speaker you have made and i was wonderin what where the settings you used for the engraving of the acrylic name plate and the power of your laser. Thanks for your time AL.
I have two subwoofers of sound link 42mm (1.5 inch) How many inches of box do you have to make for this speaker's good effect? Without bass resonance. No Bass Resonance. is going to use Bass Air Tube
@@beatsmyheart4539lol! You need to get the T/S paramters of the subwoofer. Put this info into some software like WIN isd , or bassbox pro. This will calculate the enclosure type, and volume for the most bass , and best response.
Nice speaker! But you really should change that battery, I build a speaker with one of those; 4800Mah claimed and 1900Mah in reallity, I bought another one from aliexpress for around the same price (11€): Liitokala 12v 4400Mah wich features 6 18650 cells and after testing it, even exceed the capacity: 4500Mah. Those are really great for value
I bought one of those battery packs rated at 10,000 mah and was very disappointed by it's performance. So I tore it apart and found three Lipo batteries with a total of 650 mah each. And an old cell phone battery just shoved in there to take up space and add weight...
John Quimby a lot, I've been using it for a month in short periods of time with approximately 70% volume and its still not out of battery, I tried too, to use it at ~50% volume until it died but 2 days later it was still running so I stopped.
Even if you get a quality pack, it seems like you have to choose between total mAhs and recharge cycles. I say order vape batteries and solder in series yourself. Bout the simplest soldering job there is.
amazing Craftsmanship, the way you prepared the whole setup from building the 3d model and then making the build, But i have the same fear which below mentioned many have said but my question is right now Sub Woofer is simply in a open setup, while many like me thing if you have created a sort of cage(confined space in the setup only) for it , it will not push or vibrate other speakers in the assembly. Do you sell the Kit in India?
Witam Jeden podstawowy błąd, który popełniasz w swoich konstrukcjach, to umieszczanie w jednej obudowie głośników średnio-tonowych z wooferami. Powinny być odseparowane od siebie, wtedy woofer nie wypycha membran średiotonowców . Tak poza tym bardzo dobra robota.
Bro I'm very interested in this stuff what you are doing , you are the first youtuber I have found from northeaster I'm from Assam...Nice to see someone from our northeast I want to know where are you from
Hello @Micky Ratle I liked the way u designed the video , i ordered the same speakers, woofers and tweeters, but not aware of how to make crossover and then how to connect it,speakers, woofers and tweeters to TPA3116D2 amplifier board.It would be great pleasure, if you could make any detailed video or provide information on it. Sorry for troubling you.. Thanks in advance :)
Thanks for reply Response @Micky, Could you pls provide me box dimensions for cut the wood, am really un aware of computer it will be easy for me to cut if u can give me detail sizes for making box, it would be a great help
Is it possible to do 2x3watt full range + x1 subwoofer on a 2x3watt bluetooth stereo module? If so, how do I add or crossover the subwoofer? Im new to electrical thingy pls help.
Most of these small speaker setups are 15-30watts for small and the woofer is 30-60watts. a 3x2 amp which i have in a tiny bt box i made powers speakers no bigger then 1" or it draws too much power. I tried 4 1" speakers and it couldn't handle it over 70% volume without distortion. Also crossover's can be bought 3-4khz 2-way that can be used for highs/lows, and then a subwoofer doesn't get a crossover as you would be using an amp that is pushing a sub channel. Look for an amp that is 2.1, not 2 channel.
Yes I am trying to create this now. I do not understand the numbers of the components. I understand which is the resistors and such but i do not understand how to translate that to parts express part list, and thank you for replying back this is important. The only thing i am doing different is adding another tweeter running in series with the other one. I think that will work fine.
On mine there will be a driver and a tweeter on both sides and the woofer in the middle floor of the box. I do believe I will have to increase the size of the box volume as well to accommodate the sound. There will be a divider separating both sides with the woofer in the middle. It will be braced up as well. All will be operated with a KAB-250. I will welcome any help on what size of box would be best.
A va mawi ve! I video hi kalo thlir fo mai a a hmuh a nuam khawp mai. Ka tui ve zawng tak a ni a. Soundblab te leh Kirby Meets Audio te ho kutchhuak nen a inanlohna ka hre biklo. Dayton audio driver hi khawi ah nge lei theih?
@@MickyRalte thx buddy. One more question. As i am working on amplifier box. . made up of mdf .. i wanted to now if i want to give that mdf a wood finish. What should i use i have no knowledge on this .. plz help ..
Great build and vid edit. Poor build though. Those speaker should not be in the same cabin. Or at least, the mids should be in a separate compartment to get better lows from the woofer.
Wow I’m blown away what a beautiful design and the way you executed this build is just phenomenal.
Very cool build! I bet the front cover would look amazing with a satin finish!
Awesome build! I just saw this. THanks for the recognition in the video description. You did an awesome job!
nice build man! peaceful music ,not "glueing" the speakers and not messing up everytime. keep the great work up!
The low frequency driver should have its own volume ! It interferes with the midrange speakers
One of the most satisfying build
I’m. Urgently researching speaker builds and although I can’t comment on the audio specifications (I’m still learning) I can comment on the workmanship and that is A1. Amazing craft and care to detail on the housing. I’m sure your next speaker will be even better, I hope mine turns out as good as yours.
Loving the clear plexi element
Pro finish. My suggestion: If you were used sealed back mid drivers, the bass from the sub will be good. In this condition, the mid drivers acted as passive drivers and may damage it. Sorry for my English.
Very nice work! The etched window in the top is a nice touch.
Молодец, руки растут из нужного места.
very nice. I really love hand made things that your neighbors can't run to the store and get.
Awesome work! The editing of this video and the music fit so well. You really deserve more subscribers
Just saw the shout out to me on the crossover diagram. Thank you! It looks great!
Wow, you have your own website with free build plans and tutorial. You have really helped me plan my build for speakers I'm going to build.
Ultra Styles that's awesome! I'm so glad to hear that!
0
@@floatbob4281 e
can we have the measurements please thank you nice job you did
I just overjoyed watching this video, the music takes me away 😎
Good job, nice outcome
a very good job on the housing and around it. manny detail realy good paint job but inside you can make that visually beautiful too.
Man he is a Indian guy and they said we are not creative very good work
you are pretty creative... at wobbling your head side to side
Nice job, if I was being critical, I would have gone for a matt finish on the front, the high gloss cheapens it slightly and the perspex window will be doing nothing to improve the sound. But apart from that well done.
Really great build sir, I wanted to build the same, please suggest that what are the ideal box dimensions if we use the w6 1139sf TB sub, and also port size? Waiting for reply.
Audio sound aweseome and clear .good one 👍
Awesome work man, and nice background score. At least you didn't put this trashy EDM in the background like other Indian RUclipsrs, special thanks for that.
I am from India and I totally agree with you.
I experienced that speakers sounding much better with some sound absorbing material inside. Just have a try! ;)
Unbelievable talent my friend! Congrats.
Una maravillosa obra de arte querido amigo....Felicidades por su gran labor.....Bendiciones desde Las Islas Canarias (España)..
One of the best bluetooth speakers built here on RUclips. The only bit missing is you haven't provided with links what and where to buy all the stuff from. I am sure this sounds the best cause it is three way. Mickey if possible please provide a list of the stuff you used and where to buy them? Thanks for uploading.
gurinder singh thanks
Soeaker driver are from diyaudiocart.com and amps and battery from aliexpress
Nice speaker and video! Keep up the good work!
Amigo, poderia me ajudar no seguinte, fiz uma caixinha de som usando a placa amp tpa3116, mas o problema é que está dando um 'POC' barulho no auto falante quando desligo a chave de energia dela. Eu já tentei quase de tudo, coloquei chave separada para sequência o desligamento, pra desligar o Bluetooth por último, testei no Pac de bateria 16.8v, só na Fonte com 21v, com a placa de sinal de áudio Bluetooth desconectado da placa amp, sempre dá um estralo mais leve quando liga, e quando desliga dá um estralo mais forte nos auto falantes. Sabe como eu poderia resolver esse soco no auto falante? Principalmente quando desliga?
Encontrei uma placa de proteção que recebe alimentação, e tem 2 rele , um em cada entrada dela. E retarda a ligação em 3 segundos após alimentação de energia ao ligar.
Mas preciso de um que proteja ao desligar pra não dar o estouro no auto falante. Será que esse mesmo tipo de placa resolveria?
Congratulations, great job, I want to make constructive criticism that can help to make your work even better than it already is.
In a stereo baffle use a single tweeter for a single channel (L or R) or combine them is not good at all, the middle and high frequencies usually have a well-defined separation between the two channels, however not so at low frequencies, reason why some commercial and professional sound systems have a dedicated baffle for low frequencies; having a single twiteer produces the sensation of a monophonic sound and the loss of general quality; also the speakers of the two channels must be isolated between them and the wofeer. Greetings.
Some more constructive criticism: Since your setup has not a lot of power, your subwoofer is basically obsolete. If you had more power, you would run into problems such as the subwoofer working in the same volume as the middle tone loudspeaker distorting them since the air-pressure will handicap/change their amplitudes and frequency range.
Terrible design but good craftsmanship
Hola
Que buen vídeo con calidad de imagen y música
Da gusto ver cosas buen echas felicidades por el trabajo que realiza
un maestro de la elegancia
Este foi um dos trabalhos mais perfeitos que vi aqui no Itube, destea modalide muito bom mesmo dava para fazer em serie e vender um bom produto e otimo acabamento, perfeito mesmo parabens!!
Excelente trabajo y mucho amor por lo que hace....lo re felicito
Great Build! Great video! Great music!
Does anyone know the detail on how he extended his bluetooth range? I read that the copper extension wire needs to be a certain length to work, and also that in some cases you need to un-connect part or all of the built in antenna contacts. Can anyone share any detail or insight?
What kind of feet are those on the subwoofer? I like those.
Здравствуйте, подскажите что это за катушки и какую они играют роль?
И что за белая, прямоугольная штуковина вместе с ними?
Can be used combo of 2 full range speakers and 1 woofer speaker?
Belo trabalho!
Continue assim!!
Amazing paint work
How did you seal the mdf so well? I've tried everything
I will agree if you are called a professional person in the project work in your way
Beautiful build!
Does the mid and the speakers are connected in s stereo, right and left and woofer in mono channel?
Nicely constructed
Hi ive just seen your Video and what an excellent speaker you have made and i was wonderin what where the settings you used for the engraving of the acrylic name plate and the power of your laser.
Thanks for your time AL.
Excelent work, where you purchase the metal foot ? please let me know
I see your amp also has HF distortion due to lack of resistor on the output. I wish they would fix them.
I have two subwoofers of sound link 42mm (1.5 inch)
How many inches of box do you have to make for this speaker's good effect?
Without bass resonance.
No Bass Resonance.
is going to use Bass Air Tube
You're new to the English huh?
@@theejoeylee
Yes I am a novice in English. Do you have a problem with this?😂😂😂
@@beatsmyheart4539lol! You need to get the T/S paramters of the subwoofer. Put this info into some software like WIN isd , or bassbox pro. This will calculate the enclosure type, and volume for the most bass , and best response.
Nice speaker! But you really should change that battery, I build a speaker with one of those; 4800Mah claimed and 1900Mah in reallity, I bought another one from aliexpress for around the same price (11€): Liitokala 12v 4400Mah wich features 6 18650 cells and after testing it, even exceed the capacity: 4500Mah. Those are really great for value
Spartoz yes this battery is not what its rated.
I bought one of those battery packs rated at 10,000 mah and was very disappointed by it's performance. So I tore it apart and found three Lipo batteries with a total of 650 mah each. And an old cell phone battery just shoved in there to take up space and add weight...
How much usage on average, are you getting on 4500mAh (the good one, not the cheap knock off)
John Quimby a lot, I've been using it for a month in short periods of time with approximately 70% volume and its still not out of battery, I tried too, to use it at ~50% volume until it died but 2 days later it was still running so I stopped.
Even if you get a quality pack, it seems like you have to choose between total mAhs and recharge cycles. I say order vape batteries and solder in series yourself. Bout the simplest soldering job there is.
Awesome video, awesome speaker! Great job man!
amazing Craftsmanship, the way you prepared the whole setup from building the 3d model and then making the build, But i have the same fear which below mentioned many have said but my question is right now Sub Woofer is simply in a open setup, while many like me thing if you have created a sort of cage(confined space in the setup only) for it , it will not push or vibrate other speakers in the assembly.
Do you sell the Kit in India?
Witam
Jeden podstawowy błąd, który popełniasz w swoich konstrukcjach, to umieszczanie w jednej obudowie głośników średnio-tonowych z wooferami. Powinny być odseparowane od siebie, wtedy woofer nie wypycha membran średiotonowców . Tak poza tym bardzo dobra robota.
Nice build!
Awesome build!!!
Una obra de arte 👍
Dear Micky,
How did you cut those small circles with router? Could you please show me? :)
Thanks
well done! Any chance to get the measures of the box?
very nice to watch it!
Great work! Where did you get the feet?
nice work!! would love to know more about the battery pack you used
Sub and mid in the same enclosure??
So cool, excellent job!!!
Is there a parts lsit for electronics?
Fabulous I really like that project. The dimensions are standard?
Keipawh ka siam ve ṭhin a, hei tunah pawh parts ka chah mek asin😄
10:00 wait is that background sound is Rick from Rick and Morty? :'DD
Btw good job for this speaker, so awesome!
Nice JOB!!, Impressed.
Very nice my friend....i like it!!
, it's not a three way as the header says, it's a 2 way speaker with 3 drivers, two midbass drivers and a done tweeter.
Profesjonalista ,,💥👊🔥👍🏼👍💪 tyle że nieodzielił suba od szerokopasmowców , a tak to zajebiście że 👍🏼👍🔥👊💥😎
Bro I'm very interested in this stuff what you are doing , you are the first youtuber I have found from northeaster I'm from Assam...Nice to see someone from our northeast I want to know where are you from
Mizoram
Hello @Micky Ratle I liked the way u designed the video , i ordered the same speakers, woofers and tweeters, but not aware of how to make crossover and then how to connect it,speakers, woofers and tweeters to TPA3116D2 amplifier board.It would be great pleasure, if you could make any detailed video or provide information on it. Sorry for troubling you.. Thanks in advance :)
or els pls specify parts details used in ur video so that i will order same to make cross over
hello, the crossover diagram is there in the video. At 9 minutes 18 secs. If u have more question, feel free :-)
Thanks for reply Response @Micky, Could you pls provide me box dimensions for cut the wood, am really un aware of computer it will be easy for me to cut if u can give me detail sizes for making box, it would be a great help
where are u from?
Micky Ralte India
It would sound better if you saparate the woffer from small speakers. I know you currently don't like this speaker sound when big bass is kicked in.
Can you give mere details about the toll used to cut the holes
João Luis Martins u mean tool???
One could add an Amazon Echo Link and create multiple of these for a multi-room speaker experience :)
Awesome build man. I’m guessing that’s an 8000mah battery. What’s the average battery life you get in a single charge ?
nice video, nice speaker, but the sound need more bass
Incredible job !! Confirm you only used glue to hold the box together ? Does the sub not have to be in a separate compartment ?
They're sharing spaces with mid-range, which is not a good idea though
And I expected more power to the sound itself
Tha khawp mai. Video Siam zel ang che
What is that blue thing you put in there at 7:30 ?
Thats the battery 😀😀😀
Oh. Connections weren't clear in the video. Can you explain how the battery is connected? Can the battery charge while the speakers are playing?
Which app is used to make the begining of the video?
I think it's Sketchup, if you're referring to the 3D model
Va tha ve... Freddie pawh kha tih tir ve rawh youtube. Van tha si em
How come no padding inside the box?
two different speaker drivers in same box with same vent tube??
Nice work. Can you please tell me what is the sofware used for designing the speaker?
Victor Teodorescu thanks. I model the crossiver in passive crossover designer (PCD) by Jeff Bagby. Box dimension, i use winisd.
Micky Ralte , i was referring to the graphic design of the speaker. Thx!
Victor Teodorescu hahaha its google sketchup
Keep up I love your project
What software is he using to design the 3D plan's?!
Sketchup 😀
Nice.. ! I like it...👍👍👍
me manda as medidas dessa caixa por favor (
send me the measurements of this box please)
Is it possible to do 2x3watt full range + x1 subwoofer on a 2x3watt bluetooth stereo module? If so, how do I add or crossover the subwoofer? Im new to electrical thingy pls help.
3 watt !!!!........ Its too less to add a sub
Most of these small speaker setups are 15-30watts for small and the woofer is 30-60watts. a 3x2 amp which i have in a tiny bt box i made powers speakers no bigger then 1" or it draws too much power. I tried 4 1" speakers and it couldn't handle it over 70% volume without distortion. Also crossover's can be bought 3-4khz 2-way that can be used for highs/lows, and then a subwoofer doesn't get a crossover as you would be using an amp that is pushing a sub channel. Look for an amp that is 2.1, not 2 channel.
Ev3rM0r3 ohh i got it, I saw a 2.1 module 5v thanks
Very nice vid. Is there anyway possible you can give the part list to the crossover please?
James Smith u mean the crossover diagram?
Yes I am trying to create this now. I do not understand the numbers of the components. I understand which is the resistors and such but i do not understand how to translate that to parts express part list, and thank you for replying back this is important. The only thing i am doing different is adding another tweeter running in series with the other one. I think that will work fine.
On mine there will be a driver and a tweeter on both sides and the woofer in the middle floor of the box. I do believe I will have to increase the size of the box volume as well to accommodate the sound. There will be a divider separating both sides with the woofer in the middle. It will be braced up as well. All will be operated with a KAB-250. I will welcome any help on what size of box would be best.
James Smith are u going to use the same mid, tweeter and woofer as mine?
yes, just 2 tweeters instead
Ótimo trabalho.
A va mawi ve! I video hi kalo thlir fo mai a a hmuh a nuam khawp mai. Ka tui ve zawng tak a ni a. Soundblab te leh Kirby Meets Audio te ho kutchhuak nen a inanlohna ka hre biklo.
Dayton audio driver hi khawi ah nge lei theih?
Dika Mualchin i ti lawmawm e. Bibin, diyaudiocart.com hnenah hian a awm nual, a neih loh chuan a chah tir theih bawk.
Micky Ralte ka lawm lutuk e. Video siam zel rawh. Hmuh a nuam 😊
Dika Mualchin hahaha order a awm loh chuan siam reng chi poh ni lo. Video te han siam ve la, a nuam ve asin.
un solo tweeter al centro?
great speaker and great videos... but the light in mica istoo bright
Which design software you used ?
Sketchup
@@MickyRalte thx buddy. One more question. As i am working on amplifier box. . made up of mdf .. i wanted to now if i want to give that mdf a wood finish. What should i use i have no knowledge on this .. plz help ..
@@sparsh_editx you cannot give a wood finish to mdf. If u want a wook looks, then stick some wood vinyl
parabéns pelo trabalho gostei muito
Boa tarde !
Gostei do projeto muito bem acabado.
what app using for model
Good job.
Great build and vid edit. Poor build though. Those speaker should not be in the same cabin. Or at least, the mids should be in a separate compartment to get better lows from the woofer.
How did you do crosover ?