Unbelievable..my eyes seeing the video and my brains like wtf..not even the Bluetooth speakers in stores eye catching like this here you are truly amazing 👏👏👏
This was awesome to watch. Thank you. I used to build my own, and for my friends, speaker boxes. Over 35 years ago. This has inspired me to build again!
Ideally, the placement of tweeters is at the widest extreme possible. This helps separate the two channels to create a wide stereo field. This is why old boom boxes always have them on the outside edge.
its look like great technology only from outside, but inside components and this scheme isnt a better way for this DIY. By the way, boombox assumes powerful sound and speaker flexing, that isnt observed here... 6 real watts of 30 (for 1 channel) critical available of this speakers.
Hello, i added subtitles in some parts of the video. Some of the most asked questions: -I build it for my personal use as an hobby, i don´t sell them. -In all my builds some things could be always better i know. -Parts list, song names and other infos in the video description. Thank you for the positive comments and constructive comments ;)
Я только невкурил это 12 вальтовка получилась на 7 тысяч? 7 тысяч это же мало для такой бандуры.а так все что бы я заменил так это динамики,нах они нужны по 300 ватт то.и 100 хватило бы даже 50-75..
Сами динамики должны быть в отдельных глухих корпуса друг от друга для лучшего объёма звучания. Так делается когда используются пассивные низкочастотные излучатели.
Выглядит круто, но, несколько советов: ВЧ надо было ставить по краям, для расширения стерео базы Зря использовались динамики на 8 Ом, им явно не хватает напруги На dc-dc поднять напряжение до 14,4, это типовое в авто, за одно и мощность вырастет.
Анатолий Бондин , а также: Перемычка между левым правым каналом Можно было набить корпус каким нибудь синтепоном Излучатель типа сабвуфер разместить на верхней поверхности и т.д. Хотя для такой магнитолы все просто отлично.
ветер теплый а ещё бы оставить питание магнитолы от аккумов, а кнопку выключения кинуть на АСС. Лично меня задолбало бы каждый раз ждать полной загрузки и настройки балалайки)
Kdfk de darle gracias a la noche no se olviden que b s jajaja jajaja m de darle a g de la vida g a g y el amor hoy a ver si se v de hoy y gracias a Dios que k ya me hizo el viernes a la mañana en la mañana en la casa y gracias g a g y el amor hoy y gracias g a ver si puedo olvidar a la noche no me dejes bien gracias g a g y el amor hoy y gracias g a ver qué pasa
Норм! Но динамики нужно закрывать грилями. И в закрытый ящик нужно синтепон или вату укладывать. Так не происходит нагрева воздуха в кабинете, нет повышению жёсткости.
Great build, just one tip for improvement: The tweeters should be as far away from each other to provide for better stereo separation. Also put them higher so that there's less chance that stuff lying around will block them. Other than that, again, thumbs up!
@@1one3_Racing What else do you mean? Let's not forget that this is not intended to be a high def stereo system. But whatever you can improve without a dime higher cost or effort is a good thing.
1 little tip, put black grills on those speakers, annoying kids always poke the damn speaker cones in and it looks horrible, my 2 cents AND YES I SPEAK FROM EXPERIENCE lol
Yes you are correct but in the end it's not wide enough anyway to matter really. It should really have the compartments divided and the airspace calculated too, but it's a boom box not an audiophile device. And I dare you to show me ANY boom box that was produced that has Chambers and even a calculated airspace.
@@ytcute1993 you CAN but it won't matter. There is no such thing as a boom box with stereo separation unless the speakers are detachable. So again, it does not matter.
VERY GOOD! A robust and reliable construction with proper fixtures and components! Assembling the box panels with both glue and screws makes this very air tight, that adds depth to the Bass frequencies. I have done this type of speakers for my PC Audio System with larger components and almost similar in appeaaence. Congratulations! Thanks a lot!
I built something like this way back in the 80's. Replaced the head unit in the 2000's with one that did mp3 and CD's. The battery's are a good move I used a couple of old emergency light 12 volt lead acid units. If I was to do it now I would probably fit external units that interchange with power tools. The Passives were a nice touch though and would help get the most out of it.
Hello, I was impressed with your love and dedication in the construction of the device, now I even understand that you do it for your own use but because you don’t put it for sale, I would also be happy to be able to buy such a device! Strong hug!
This was a great video this is how you should be teaching things in schools. Applied math art design creativity it would keep kids wanting to keep working on projects.
You are the king of Electronic . Im just an architect and thinking about your video and what you built.... I have nothing to say ,,,, Bravo ! / I just can build the box and coloring ,maybe attaching the speakers but nothing more !!!!!! good to see your video 👍😇
How long will that battery pack last? I am going to do this build but I want to beef up the battery with a 10AH Deep Cycle Lithium. See any issues with that? I will have to beef up the charger. Amazing work!
O cara é engenheiro, trabalho perfeito. Agora vai eu tentar fazer isso ai ? Eu regaço tudo essa caixa e depois chuto ela até quebrar pq vou ficar com raiva por que nao consegui...
Felicitaciones!! Quedo espectacular Solo un detalle, a mí parecer, podría sonar mejor si separas los Woofers, encerrando cada uno separadamente, para que que no se mezclen las frecuencias bajas?
That way people will know how loud each of the builds are before going out to purchase everything. Can you do a party build (super loud and bass comparable to some of the big names ie *boks* lol)
This thing is wild, I had no interest until I watched and now I want to build one as well. I give you credit for assembling the box then coming through with the chisel. That part probably would have driven me most nuts. Putting the inputs and stuff in the back would have been the "almost there" point for me. Great work man! I'm sure the video doesn't do justice to the actual sound in your room there. I didn't see a cooling fan, I'm guessing the head unit gets enough air flow or just doesn't get that warm to begin with?
Great skill set. This takes time and practice, doing such builds. I'm sure he didn't just jump out the gate doing this. But trial and error is a solid teacher. Awesome quarantine content.
Solid end result! Odd method to how you got there though. All that nice work with layout and soldering, only to mount all the components with tape and silicone. SO MUCH SILICONE. For anyone considering a build similar to this, you can make it a lot easier on yourself by cutting the speaker holes before cabinet assembly and by using a commonly available 12v DC adapter instead of the battery/BMS setup. Which means minimal soldering if any at all. Then you can spend the money you saved on a more powerful class D amp board, because those all-in-one android headunits don't put out much power at all.
Thanks, the main components are secured with screws, i used a soft silicone to seal the box, for the passive radiators to work the box needs to be airtight
Its nice one bro, because way back 2 decades I've also assemble a simple radio for our project in school. But now I lost my skills in the same field...hehe
Great DIY, for shure is the best portable speaker build on youtube, you inspired me to make something similar, i have to learn little more about electronics boards and how to connect them...
Very nice. I had thought about making one of these myself but I was going to use a pc power supply. I like your idea much better. Great job, excellent build quality!
ME : Going to home depot feeling excited getting the wood and all the equipment needed for this project. Then got home and starting to cut the wood and start making the housing. NEXT DAY... ME : going to bestbuy.
Using a tablet? That's cringe dude. Also if you are doing that then just get a iPod dock. You build something like this to make a cool portable boombox for car stereos.
Use 4-ohm speakers instead of 8-ohm, separate the airspace, and move tweeters to ends of box for more stereo effect. So much work to come up short in the execution.
LOL. Nothing wrong with 8ohms. My sennheiser headphones are 300 ohms for a reason. The trade off with lowering ohms is quality (generally speaking). And you will not hear stereo because the tweeters are 12 inches apart instead of 6. Stereo is overrated anyway.
@@urwholefamilydied 4-ohms are more efficient, thus longer battery life. Your headphones are working in milliwatts so you don't blow out your eardrums. And why would you invest in a premium headphone manufacturer if you weren't looking to hear the work put in by the audio recording engineer?
You have that backwards, while you can get more power out of an audio circuit with lower impedance speakers, it's more efficient and far less taxing on the audio circuit to use higher impedance speakers.
@@urwholefamilydied who cares about headphones impedance?? Talking about lowering the impedance, it is not lowering the quality. There are thousands of dolars hi-end systems on 2 ohm each cabinet..
@@keepingdistance4404 the efficiency doesn't come from impedance and, if they were 4 ohms the amplifier would have a lower efficiency and draw more current, so less battery life
Na teoria tem um erro nessa caixa, não tá com divisão do grave/medio esquerdo direito, pro som fica mais limpo ao escutar estéreo pode-se se colocar como separação na caixa entre eles pra um não cortar o outro. Se for audio mono não interessa.
Good day! I liked what you did! My question is, how much will it cost to assemble an underwater vehicle, but so that you can still lose cd mp3? Does he catch radio?
It’s not that hard man. Get a soldering iron and just connect it. I legit managed to replace my iPod 4G’s batter and if you didn’t know it needs to be soldered.
invictor strd still could on larger scale just use the concepts bud. Gonna do this for my works van (I’m a pool guy I get to take it home) build a bigamy’s box in the back w a car battery deck and subs etc. Then I can remove it if I have to switch vehicles or leave
Good ideas! Anyway, for instant tightness without the necessity of silicone I'd use a router for the speakers' and radiators' rabbets. And I'd put the tweeters to the top left and right corners for better stereo imaging ;-).
честно, мура. и вот почему и чего нет, это так на будущее кто будет делать. от инженера. - объем корпуса не расчитан, отсюда идёт бубнение а не ударные - нет фазоинвертора, корпус входит в резонанс - нет пассивных динамиков - система должна быть трехполосной, здесь две полосы, средних частот нет - гзч должны быть разделены друг от друга - внутри корпуса при таком объёме должен быть звукопоглащающий материал, войлок, синтипон.
![Twenty One Pilots - The Line (from Arcane Season 2) [Official Audio]](http://i.ytimg.com/vi/XCz7WUotXs8/mqdefault.jpg)
![[#2024MAMA] ROSÉ (로제), Bruno Mars - APT. | Mnet 241122 방송](http://i.ytimg.com/vi/dgGqD28J6aQ/mqdefault.jpg)
Parts list:
Android radio 2GB: bit.ly/3VgiyPX
6.5" Speakers: bit.ly/39T6sGE
18650 Batteries: bit.ly/3FXorHZ
Tweeters: bit.ly/39T3RMS
Passive radiator: bit.ly/3PmvA93
Crossover: bit.ly/48y9rNn
DC module: bit.ly/3wv45Sa
18650 holder: bit.ly/3yGFPix
5S PCB : bit.ly/3wokhEI
5S indicator: bit.ly/42WUFia
Power jack: bit.ly/3sEJR7m
Switch: bit.ly/3NfBzL1
Mini switch: bit.ly/3Pk7uvP
Rubber feet: bit.ly/3IkvRXQ
Adjustable Drill bit: bit.ly/3wkDOXY
"Wire holder": bit.ly/3P4En0R
Multimeter: bit.ly/3wzMNU5
Check video description for more infos, thank you for watching :)
you sell these items
Do you sell
Unbelievable..my eyes seeing the video and my brains like wtf..not even the Bluetooth speakers in stores eye catching like this here you are truly amazing 👏👏👏
DTeK you should do a DIY ATMOS set up
im interested, do u put it on sell??
This was awesome to watch. Thank you. I used to build my own, and for my friends, speaker boxes. Over 35 years ago. This has inspired me to build again!
cool :)
super cool 👍💯
I'm just speechless when I see the quality of your work ! Very nice finish and good design.
Thanks
@@DTeK do you end up saling them? And how much? Do you shipped around the USA?
Agreed
Onde consigo uma dessas
@@djmarcusgiles5605 can you make one for me?
Ideally, the placement of tweeters is at the widest extreme possible. This helps separate the two channels to create a wide stereo field. This is why old boom boxes always have them on the outside edge.
🇺🇸🏴☠️🇬🇧
🇲🇨🇵🇸🇯🇵🇬🇶🇮🇳🇦🇪🇸🇦🇨🇿
🇬🇧🏴☠️🇮🇱🇰🇷
Gshchfodjab oshszhXlb, BBM jsb iag kajb jajajsh jefbbsjsh xb d jwgsgudefv jrvag
Keren 😂
In future revisions, I reccomend you put the tweeters further apart to get more of a stereo effect from the box.
Dude. That is the neatest DIY speaker I've ever seen. It looks like something you could really buy from a legit store
thanks, glad you liked
its look like great technology only from outside, but inside components and this scheme isnt a better way for this DIY. By the way, boombox assumes powerful sound and speaker flexing, that isnt observed here... 6 real watts of 30 (for 1 channel) critical available of this speakers.
As long as you dont look inside
You should sell them I'd buy one
@@ytcute1993 there's always one 🙄
Hello, i added subtitles in some parts of the video.
Some of the most asked questions:
-I build it for my personal use as an hobby, i don´t sell them.
-In all my builds some things could be always better i know.
-Parts list, song names and other infos in the video description.
Thank you for the positive comments and constructive comments ;)
Great job bro!!! Saludos desde Colombia Latin America
How much was all the cost , and if you do happen to make another exact one will you sell it ?
How much it costs in total?
Heheheheheeheheeheheheheheheheeheheheh
What is the battery drain on this?
Золотые руки, золотая голова 👏👏👏.
Вот уж по истине - ,, хочешь сделать хорошо - сделай сам"
И на много дешевле!
Я только невкурил это 12 вальтовка получилась на 7 тысяч? 7 тысяч это же мало для такой бандуры.а так все что бы я заменил так это динамики,нах они нужны по 300 ватт то.и 100 хватило бы даже 50-75..
Bukan tanganya yang emas tapi otaknya cerdas
Yes golden hands
❤😂🎉🎉😢😅
Wow! Not only my compliments for building the entire speaker, but the sound at the end of the video! Loud and clear! I’m impressed!
thanks, glad you liked
@@DTeK I enjoyed it for sure!
Jhhvjvjheuo
Hhiscmo
ВЧ динамики надо было устанавливать как можно ближе к краям колонки.. Стерео база в таком случае шире. А в целом, офигенно, поехал ка я за фанерой)))
Сами динамики должны быть в отдельных глухих корпуса друг от друга для лучшего объёма звучания. Так делается когда используются пассивные низкочастотные излучатели.
Выглядит круто, но, несколько советов:
ВЧ надо было ставить по краям, для расширения стерео базы
Зря использовались динамики на 8 Ом, им явно не хватает напруги
На dc-dc поднять напряжение до 14,4, это типовое в авто, за одно и мощность вырастет.
Анатолий Бондин , а также:
Перемычка между левым правым каналом
Можно было набить корпус каким нибудь синтепоном
Излучатель типа сабвуфер разместить на верхней поверхности и т.д.
Хотя для такой магнитолы все просто отлично.
ветер теплый а ещё бы оставить питание магнитолы от аккумов, а кнопку выключения кинуть на АСС. Лично меня задолбало бы каждый раз ждать полной загрузки и настройки балалайки)
@@olegtsarenkoff , истинно!
@Felix Cotov , ну да. Из говна пуля.
Выглядит да, но внутрянка - колхоз колхозом.
Only three tips:
1 - Change baterry for more quality cells.
2 - Insulation for speakers
3 - Voltaje is better 14.4V, equals car.
This is pretty dope. I have a Bluetooth radio I never got around to installing in my car. Still brand new in the box. Gonna try this.
thanks :)
Listen, man, you're just a genius of engineering and your hands are golden. ''
Thanks :)
@@DTeK Respect from Estonia! High class!
@@dealdeal2918 no hes not, theres so many flaws in this design. But for a DIY amateur its pretty good.
@@Flowxing can you mention few of em please
Thanks
When you assessable things in a way that you will never need to disassemble it and re-check again .. that’s confidence !
Kdfk de darle gracias a la noche no se olviden que b s jajaja jajaja m de darle a g de la vida g a g y el amor hoy a ver si se v de hoy y gracias a Dios que k ya me hizo el viernes a la mañana en la mañana en la casa y gracias g a g y el amor hoy y gracias g a ver si puedo olvidar a la noche no me dejes bien gracias g a g y el amor hoy y gracias g a ver qué pasa
Right...he prob has alot of experience in setting these up.
The amounts of details is insane!!! LOVE IT!!!!!
Thanks, glad you liked
दोस्त एक हमको भी ऐसा बना कर दो कितना कपड़े चाहिए इसका प्राइस कितना होगा क्या तुम्हारा व्हाट्सएप नंबर है
This is really impressive. I am a pretty handsy person myself but even for me, this is FANTASTIC!
Better sounding and looking than most sold in stores. Great build. Looks and sounds amazing.
How do u know it sound amazing?
Эта лучшая самодельная колонка что я видел, молодец парень😉
Hamko ek chahiye
Все перечеркнуло отсутствие блока питания 220в внутри колонки. Объем позволяет, а так еще ссобой блок таскать, такое себе.
Недоработанная игрушка.
Норм!
Но динамики нужно закрывать грилями. И в закрытый ящик нужно синтепон или вату укладывать. Так не происходит нагрева воздуха в кабинете, нет повышению жёсткости.
херню сказал)
Покажи свою колонку, посмотрим.
I wish you were my next door neighbor!! Wowsers!
Anyone else just watching this to pass time because their state is in lockdown? Lol...
😂👌🏻
Where you're from?
U got that right.. philippines here
Brazil
Yup 1st day for me in NZ
Same😂😂😂
*WONDERFULLY MADE AND SOMETHING THAT WILL LAST MANY YEARS!!*
Thanks
Great build, just one tip for improvement:
The tweeters should be as far away from each other to provide for better stereo separation.
Also put them higher so that there's less chance that stuff lying around will block them.
Other than that, again, thumbs up!
I think that's the least of the problems with this
@@1one3_Racing What else do you mean?
Let's not forget that this is not intended to be a high def stereo system. But whatever you can improve without a dime higher cost or effort is a good thing.
@@1one3_Racing yeah and i would have divided the 2 woofers into separate chambers. They look out of phase. But its still cool.
Oooo
@@1one3_Racing you sound like Ur head needs spun
Молодец! Очень высокая культура производства! Красиво.
Жаль только что где покупал не написал и сылок на колонки и уселок нету!
Культура термоклея.
Bloody genius!!! Looks so professional and better than most boom boxes out there! Well done Sir!😉👌🏾
Thanks
1 little tip, put black grills on those speakers, annoying kids always poke the damn speaker cones in and it looks horrible, my 2 cents
AND YES I SPEAK FROM EXPERIENCE lol
😂
you allow kids to be near your stuff?????? wow...
@@backstab86 do you have kids? They find ways to touch your stuff, unless it's in a safe.
@@backstab86 hmm, kids do stuff when one one is watching... it's common sense.
Very good!!! Watching from brazil🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷
Wow ! Just come accross your channel, what a fantastic build !
thanks :)
I watched this at 2x speed and saved 50% on my auto insurance
Willy Wonka - good day, sir
Thanks 🤘🏽
Genius
Everything is cool only tweeters are set as far apart as possible for the best stereo effect !
Yes you are correct but in the end it's not wide enough anyway to matter really. It should really have the compartments divided and the airspace calculated too, but it's a boom box not an audiophile device.
And I dare you to show me ANY boom box that was produced that has Chambers and even a calculated airspace.
nobody knows what stereo is nowadays.
@@jimb032 anyway, all of this must be done wonderfully regardless of the destination
@@ytcute1993 you CAN but it won't matter. There is no such thing as a boom box with stereo separation unless the speakers are detachable. So again, it does not matter.
VERY GOOD!
A robust and reliable construction with proper fixtures and components!
Assembling the box panels with both glue and screws makes this very air tight, that adds depth to the Bass frequencies.
I have done this type of speakers for my PC Audio System with larger components and almost similar in appeaaence.
Congratulations!
Thanks a lot!
thanks, glad you liked
Tank you bro
I built something like this way back in the 80's. Replaced the head unit in the 2000's with one that did mp3 and CD's. The battery's are a good move I used a couple of old emergency light 12 volt lead acid units. If I was to do it now I would probably fit external units that interchange with power tools.
The Passives were a nice touch though and would help get the most out of it.
Хорошее видео. Начал смотреть в наушниках, потом уснул на кресле, проснулся в аккурат под конец. Спасибо.
Perfect for self quarantine. Heavy sounds I liked it.
thanks
Just what I was thinking lol
Hello, I was impressed with your love and dedication in the construction of the device, now I even understand that you do it for your own use but because you don’t put it for sale, I would also be happy to be able to buy such a device! Strong hug!
Thanks ;)
DTeK what would it cost me for one? I’d pay you to make me one I’m a heart beat, possibly in red
How much are you both willing to pay ? I have a cnc and i make speakers, maybe we can work together guys
Honestly this is a great idea and well designed. Gonna subscribe now.
And music from your own DIY speaker like this sounds better than others
for sure... u got Better Batterie POWER
Speakers vokal bass
Wood is the best material FOR 🔊🎶🎵🎼🎛✌✌✌🙋🏻♂️
or POWER FROM 220V /12V DC
Во Чувак Замутил !!!! Крутяк
This was a great video this is how you should be teaching things in schools. Applied math art design creativity it would keep kids wanting to keep working on projects.
V
Нормас, мне зашло. На кухню бы такое замутить. Времени блин нет. Лойс как всегда👍👍👍
Можно сразу встроить в верхний ящик, крупам и макаронам понравится.)
Ivan Rogov ,та крупы и макароны, у меня в кладовке. А вот приблуда эта, реально зачётная.
QURWITREIRWIFEURWJTTIRWJFTDKAAAAAIEWJ
круто тут россияне есть !
Хорошо слелал, но твитеры долдны быть как можно дальше друг от друга, именно твитеры задают стерео картинку и я бы разделил ящик на левый и правый
You are the king of Electronic . Im just an architect and thinking about your video and what you built.... I have nothing to say ,,,, Bravo ! / I just can build the box and coloring ,maybe attaching the speakers but nothing more !!!!!! good to see your video 👍😇
Thanks, its easy, just follow the schematic :)
That's dope. I can't imagine what it sounds like in person.
Thanks, i´m very happy with the sound quality
It would definitely sound gr8 those speakers are 300w each
@@mayureshjoshi2261 those speakers aint 300w and even 100. 80W RMS at most lol
@@pmx2384 in the video while assembling the speaker, at tha back you can see it is mentioned as 300w so I thought in that way 😅
@@mayureshjoshi2261 it can only peak at 300 watts for a short time, it'll mainly Operate at 80 watts
How long will that battery pack last? I am going to do this build but I want to beef up the battery with a 10AH Deep Cycle Lithium. See any issues with that? I will have to beef up the charger. Amazing work!
Awesome design! One suggestion. A speaker grill cover would be an added protection and will make this more rugged.
Thanks, easy to add ;)
This is one of the best DIY I've seen. I want one...
Thanks, glad you liked :)
This man has 2 professions: 1st- woodworker and 2nd- electronic master.
And 3rdly screwmaster lol
This man has profession РУКОЖОП)))
Awesome speakers, if u ever decide to sell one I would be very interested. Excellent job! Keep making them...
Try to make it
@@nanarokom9619 mea
O cara é engenheiro, trabalho perfeito. Agora vai eu tentar fazer isso ai ?
Eu regaço tudo essa caixa e depois chuto ela até quebrar pq vou ficar com raiva por que nao consegui...
Kkkkkk
У тебя золотые руки!!! Круто сделано!!!
Real nice. What makes it cool is that it's also portable.
It's even more crazy the fact he added a android based music player mostly used in cars and also made it give video output.
🤗
You can watch my videos also ❤️❤️
Felicitaciones!! Quedo espectacular
Solo un detalle, a mí parecer, podría sonar mejor si separas los Woofers, encerrando cada uno separadamente, para que que no se mezclen las frecuencias bajas?
incredibly talented person) I would sell my soul for this column) I admire your talent)
I'm blown away on your skills to build this awesomeness 👌
I love your builds. I think it would be a great idea to also provide decible readings on your builds. Great work and keep up the good job!
That way people will know how loud each of the builds are before going out to purchase everything. Can you do a party build (super loud and bass comparable to some of the big names ie *boks* lol)
Thanks, maybe in teh future :)
😅😢😂😂
That's really cool and I'm gonna watch this so hard, knowing that I'll never make this
St3ve_frog Tuhiri haha me too!
Which is so sad.
Exactly 🤣🤣🤣
Such a nice and clean build. Good job sir!
Thanks, glad you liked
But acoustics wrong
This thing is wild, I had no interest until I watched and now I want to build one as well. I give you credit for assembling the box then coming through with the chisel. That part probably would have driven me most nuts. Putting the inputs and stuff in the back would have been the "almost there" point for me. Great work man! I'm sure the video doesn't do justice to the actual sound in your room there. I didn't see a cooling fan, I'm guessing the head unit gets enough air flow or just doesn't get that warm to begin with?
Thanks, its not necessary any fan, i did some air vents on the top of the radio :)
This is my Favorite one you have done! I want to Try to do this one! Amazing Job!
Thank you, apreciated !
Hi Dear....
that was the cleanest build ive seen im following you now
Great skill set. This takes time and practice, doing such builds. I'm sure he didn't just jump out the gate doing this. But trial and error is a solid teacher. Awesome quarantine content.
Como se llama la primera canción que pusiste??
@AngryBlack I'd accept one of them from you. Just let me know how. 👍🏾
@@putosgonzales1764 búscala en la descripcion del video
Solid end result! Odd method to how you got there though. All that nice work with layout and soldering, only to mount all the components with tape and silicone. SO MUCH SILICONE.
For anyone considering a build similar to this, you can make it a lot easier on yourself by cutting the speaker holes before cabinet assembly and by using a commonly available 12v DC adapter instead of the battery/BMS setup. Which means minimal soldering if any at all. Then you can spend the money you saved on a more powerful class D amp board, because those all-in-one android headunits don't put out much power at all.
Thanks, the main components are secured with screws, i used a soft silicone to seal the box, for the passive radiators to work the box needs to be airtight
Coolest Bluetooth speaker I’ve ever seen. Genius !
красавчик , плей лист в описании отдельный лайк , слушаю музыку и представляю твой бумбокс)))
А я твою мамку
@@wotzefak-mazafak и тетку)
Бумбокс дерьмовый.
Its nice one bro, because way back 2 decades I've also assemble a simple radio for our project in school. But now I lost my skills in the same field...hehe
Great DIY, for shure is the best portable speaker build on youtube, you inspired me to make something similar, i have to learn little more about electronics boards and how to connect them...
Thanks, glad you liked
you can upgrade the sound quality with passive crossovers bro i like your workmanship good job.
I would buy this ASAP I always wanted something like this with car speakers especially when working out or playing basketball outside.
Thanks
@@DTeK how to purchase it
How to purchase
Xin chào, bạn khỏe không ? Tôi mong bạn luôn khỏe mạnh
He really didn’t make this easy on the average person, I promise all of you that there are way easier ways of doing this...
Orangnya super creatif. Orang Indonesia kagum melihat vidio ini. Salam dari Indonesia ❤❤❤❤❤❤❤❤❤❤❤❤❤❤
Very nice. I had thought about making one of these myself but I was going to use a pc power supply. I like your idea much better. Great job, excellent build quality!
thanks
@@DTeK vc uytiyuy a tuyuyuy
ME : Going to home depot feeling excited getting the wood and all the equipment needed for this project.
Then got home and starting to cut the wood and start making the housing. NEXT DAY... ME : going to bestbuy.
Mantap Bang
Don't go to best buy and buy any of their audio garbage lol
Nice work, the only question is, how long does it run on batteries?
Perfect 👍. Only thing I would’ve done is add some speaker 🔈 guards in the front. Well done.
Going to have to attempt putting one of these together. Love the setup. Simple and clean as well, nice work!!
thanks
رسه غلي
А были когда-то времена, когда небыло термоклея!)))
Брали эпоксидку, как и сейчас когда нет термоклея
А шуруповерт то был🤦♂️
Спермоклей
Я при разборе старых колонок 90х годов находил там нечто похожее на спермоклей. Но что за клей хз.
Home Depot: "Sale on wood screws!"
You: "I have boombox tutorial coming up... I will take all of them."
🤣🤣🤣
Incredible build mate but the choice of genre at the end was incredible. blow some METAL and Dubstep through it. Awesome work though!!
Pretty sure I have everything I need to build this leftover from other projects in the garage. Quarantine Project!
thats pretty cool, never thought about getting a double din head unit for a potable setup before.
Way cool
Oi Bom dia
@just me still need an amplifier :)
Using a tablet? That's cringe dude. Also if you are doing that then just get a iPod dock. You build something like this to make a cool portable boombox for car stereos.
Сделано с душой 🔥
Но звук-то говно, всё шипит и бубнит.
@@alexandrvetelkin5196 и как можно это исправить?
Dummy nu nenaithan parava illa nalla iruku super
Use 4-ohm speakers instead of 8-ohm, separate the airspace, and move tweeters to ends of box for more stereo effect. So much work to come up short in the execution.
LOL. Nothing wrong with 8ohms. My sennheiser headphones are 300 ohms for a reason. The trade off with lowering ohms is quality (generally speaking). And you will not hear stereo because the tweeters are 12 inches apart instead of 6. Stereo is overrated anyway.
@@urwholefamilydied 4-ohms are more efficient, thus longer battery life. Your headphones are working in milliwatts so you don't blow out your eardrums. And why would you invest in a premium headphone manufacturer if you weren't looking to hear the work put in by the audio recording engineer?
You have that backwards, while you can get more power out of an audio circuit with lower impedance speakers, it's more efficient and far less taxing on the audio circuit to use higher impedance speakers.
@@urwholefamilydied who cares about headphones impedance?? Talking about lowering the impedance, it is not lowering the quality. There are thousands of dolars hi-end systems on 2 ohm each cabinet..
@@keepingdistance4404 the efficiency doesn't come from impedance and, if they were 4 ohms the amplifier would have a lower efficiency and draw more current, so less battery life
Who gave this guy his Jedi Powers!
He needs one for real
Or who gave you the right of humiliating jedi powers, thinking all the works that you cant do are jedi powers?
God the creator, gives His creation to create. Glory to God. Drop heavens beat. Jesus loves you. Get km tune Jesus saves!
it looks not bad, but dont overrate it.
He was born with them
this is fantastic....i know what I'm doing while I'm stuck in the house due to covid-19
Top class diy working👍
I thought it was a simple diy. Cool project
Que trabalho incrível, deu até vontade de ter uma.
Sim
Na teoria tem um erro nessa caixa, não tá com divisão do grave/medio esquerdo direito, pro som fica mais limpo ao escutar estéreo pode-se se colocar como separação na caixa entre eles pra um não cortar o outro. Se for audio mono não interessa.
So good to see creativity like that rather than all those stupid meems we get bombarded with that was a pleasure to watch nice one fam
Круто!!! Красиво!!! И звучит!!! У тебя просто золотые руки!!!
И яйца всмяточку...
🤪🤗🤪🤗🤔
Good day! I liked what you did! My question is, how much will it cost to assemble an underwater vehicle, but so that you can still lose cd mp3? Does he catch radio?
My level of a DIY stereo is cutting a slot in a empty Pringle’s can for my phone.
Hey, that´s the start ;)
Mi nivel haciendo inventos es igual al tuyo. Jaja
Actually that's pretty cool.
My start was to upgrade chinese fake jbl 🤣
i use my cofree mug
That’s what engineering school does for u !!! I wouldn’t know where to start
Wow! This is some fantastic work! Lovely stuff.. glad I subscribed! Keep it up..
Thanks :)
Am I the only one that was thinking "oh, I could do this" until he started with all the electronic stuff?
The wood stuff is my hang-up...😆
Nope. That part ended my enthusiasm as well.
Yes..lol
It’s not that hard man. Get a soldering iron and just connect it. I legit managed to replace my iPod 4G’s batter and if you didn’t know it needs to be soldered.
invictor strd still could on larger scale just use the concepts bud. Gonna do this for my works van (I’m a pool guy I get to take it home) build a bigamy’s box in the back w a car battery deck and subs etc.
Then I can remove it if I have to switch vehicles or leave
I wish I knew more about wiring like this. I'm good at designing and would build tower speaker
It's not that complicated if you put your mind into it
@@iskandermejri8526 de
I
I build aluminum boats. Our radios always get burnt from welding or smashed. You’ve inspired me to build an aluminum bombproof radio. ✌🏻
looks realy very good. the only thing i would change is the position of the tweeters in the left an right corner for a better stereo sound.
Unless you are listening less than a meter away the difference will be unperceptible
Good ideas! Anyway, for instant tightness without the necessity of silicone I'd use a router for the speakers' and radiators' rabbets. And I'd put the tweeters to the top left and right corners for better stereo imaging ;-).
🤗
Exactly, think same about stereo image.
Cómo puedo contener un aparato así
Nerapa duitt
Working as an auto mechanic this would be great to have in the shop.
честно, мура. и вот почему и чего нет, это так на будущее кто будет делать. от инженера.
- объем корпуса не расчитан, отсюда идёт бубнение а не ударные
- нет фазоинвертора, корпус входит в резонанс
- нет пассивных динамиков
- система должна быть трехполосной, здесь две полосы, средних частот нет
- гзч должны быть разделены друг от друга
- внутри корпуса при таком объёме должен быть звукопоглащающий материал, войлок, синтипон.
Пассивные есть, а вот с синтепоном и разделом объема согласен