To all the people dissing the sound you have to keep in mind he's recording sound from an open space. This isn't a recording studio. Considering the distortion isn't really that bad given the conditions I would conclude it's not too bad for an amateur. While it's not as good as one you could by many of you are missing the point. Learning. The 1st car stereo I did was horrible compared to what I have now. I learned a lot from doing it and now I have it exactly how I want it. I have 0 distortion through the entire range of volume.
That doesn't matter lol. The speaker's sound is ruined by the lack of tuning and fixing up the box. The speaker is just bouncing air in and out of that box
Before you put your horrible comments.. create your own first. and will see if its better than this guys doing.. or just appreciate and respect his creativity.
I built two tower speakers back in the 80's. Everyone that seen and heard them were awe struck of the design and the sound, and most of the speakers were salvaged from other speakers, except for the horns, and I did this back when I was working 10-12 hour shifts 6 days a week, and I still had time to build it. The only reason I stopped doing these kinds of things is that I no longer have my workshop. This is a lot easier than you think, but people are right, it is now better to buy a Bluetooth speaker especially portable with a battery. I have been running JBL's paired with my other computer for years, and the nicest thing is being able to grab both JBLs and take them anywhere in the house while they are playing music from the computer. On my main computer I have Pioneer DJs with Bluetooth which are nice, but the speakers are wired, so you just can't grab them and move them around and they are constantly plugged in, meaning you just grab and go easily. More or less I regret buying them now.
To everyone saying it sounds terrible: You do realize first this was recorded on a mic, then filtered by RUclips, then played on your most likely shit phone speaker. How bout y'all talk on subject you at least have some clue about. Even if it isn't the best, this man put his time into it and I bet it's worth somethin to him.
Nice design. Good idea to use the b1205s to avoid a ground loop. The vu meter is nice 2! At this moment I am building a 2.1 boobox with parts of an broken home cinema set. I have some suggestions: - add damping material to the satellites and the subwoofer. It will improve the sound quality. - mount the amplifier in a better way....now its just hanging on its knobs How is the amplifier? Previous versions where very noisy. And is there was a big plopping noise when you switch on the power supply. Is this one improved?
, I've seen so many people build speakers and spend so much time and effort and then in the end......... NO POLYFILL AND OR INSULATION WHAT SO EVER !!!!!!!!! WRONG thing to do people. CMon, you know better than just to have a bare cabnet.
Сергей Сирук, да. По сути, здесь много чего можно ещё изменить, либо в угоду дизайна, я бы подобрал другие динамики для колонок, так и в плане качества.
Сергей Сирук, нет, я имел ввиду на данный момент по дизайну, по мне, хотелось бы чуть меньше в диаметре, визуально так будет смотреться симпатичнее, но это на мой вкус, да и при меньших габаритах динамиков, подобрать их будет труднее по качеству. Что же по техническим характеристикам, думаю автор ролика всё же подбирал подходящие динамики и по чувствительности, и исходя из размеров самого корпуса (это который для бутылок из-под виски) :-) Но так как саму музыку мы слышим через RUclips, не совсем понятно на сколько хорош звук, хотя я слушал через нормальные полноразмерные наушники и в принципе мне понравилось. В этом смысле я и имел ввиду, что придётся возможно доработать под себя, да и в целом, так как у каждого из нас, слух и музыкальные предпочтения разные, соответственно и тестирование лучше проводить сидя рядом, а не онлайн, заранее запастись разным музыкальным материалом и вполне возможно, после тестирования вылезут какие ни будь огрехи. А так комплект получился классный, с удовольствием сотворил или заказал подобный, так как не имею подобного бочёнка и всего остального под рукой :-) )))
это наихудшая идея! чувак так только бочонок испортил! без рассчетов, тонкие стенки, динамик в торец корпуса... как итог, и это отчетливо слышно на записи,- бубнелка-перделка!
faltou vedação das caixas, principalmente nos LED aonde o ar vaza, fazendo que o som seja um totalmente distorcido e feio, e faltou também preencher as caixas com manta de poliéster, seria interessante uma versão 2.0 nesse projeto
Você te m a relação dos itens usados neste video? Gostaria de fazer e achei interessante seu comentário sobre a manta, seira simplesmente encher os vazios com ela?
People, as long as you build a subwoofer enclosure to spec of the subwoofer, and build a port properly sized and tune to the Box, it will sound great! There is no need for polyfill or any insulation. Especially if you are building enclosures extremely close to proper specifications. Putting shit inside of your enclosure means you lose internal volume, granted polyfill doesn't take up much volume. Normal cabinet speakers that are in a sealed enclosure *should* have polyfill on the inside. That's not a recommendation it's almost a standard at this point. But any subwoofer or enclosure that is ported does NOT need any insulation. It's an extra step that is not needed and does not improve quality of sound. The thing that improves quality of sound the most is ample air room and a good sounding amplifier and speaker combo. If you have shity equipment, even with the perfect enclosure, you will have shity sound. If you have decent equipment and a really good enclosure you will have a decent sound. That goes the same the other way around, you can have the best equipment in the world but if you don't have the knowledge to build a proper enclosure it will sound like garbage.
Eduardo 😄 y el de portada ir al u y que ases chula q ases pilar de la casa de mi papá que me dijiste de que el día de mañana y te lo envío en adjunto envío el comprobante fiscal digital e impreso
Even in alchemy there's a rule/law. "You cannot gain anything without first giving something in return. To obtain, something of equal value must be lost."
Nothing from nothing leaves nothing and you gotta have something if you wanna be with me ----Billy Preston (written in a dressing room of an Atlanta night club in 1974)
everyone complaining about how bad the sound is. from what I can hear on my monitors it's just the mic picking up tons of reverberation from the room and soft clipping the mic quite a lot. and then the translation onto your system could make the sound you hear way off from what you hear in person. Microphones can never reproduce the true sound that speakers make it person :) And honestly pretty good components in the stereo speakers and a lower end subwoofer driver it wouldn't sound the best but wouldn't sound the worst. Meanwhile only spending 80$ on a set of speakers that would compare to a 200$ set of logitechs. also with a few modifications, these could sound WAY better! If you just read all that, I just wanted to thank you :) have a good day ;)
great video!!! I use this same method to build speakers all the time!!! can also nmake them portable by powering with rc car battery as well!! Anyone wanting to build something like this, you can buy all this stuff on ebay, the bluetooth adapter is only like $5.00 and most audio amp board are 5-25 depending on choice
Hey there sir! Question: What is the name of the drill thing you use for the subwoofer element? I kinda always wanted to know what those things are called:D Nice vid! have a nice day!
I think it’s a very cool project! I bet if he uses a better setup for recording it will sound a lot better. Also, I wouldn’t use a separate Bluetooth receiver but a amplifier with Bluetooth on board, you can get that for like 10 bucks.
Уверен звучит это просто отвратительно, объема для ФИ в сабе мало, порт вообще не пойми что! Зачем было подобие порта в шириках делать вообще не ясно, в обычном ЗЯ играло бы значительно лучше. Само исполнение супер грязное, от фиксации всех динамиков, до отделки диодов. Идея прикольная, но знаний в построении акустики просто 0 и желания сделать красиво тоже. Отвратительно, а после этого ещё говорят что кастомные системы плохо звучат... Не удивительно
@@randomweirdyoutubechannel8955 It takes two people to pick up and transport each of these speakers. I did have to repair the 15" woofers at one point in time several years ago. The out rubber rings that connect the paper cone to the metal chassis, had begun to literally turn to dust. But it only cost about $27 to purchase the ring replacements, which came with the glue, etc. Anyhow, I built those speakers in 1977. As for the rest of the stuff, you see my Soundcraftsmen PE-2217 audio equalizer from 1978, my 1978 AKAI 630D open reel to reel tape recorder, my 1977 Heathkit audio power amplifier, my 1977 YAMAHA CT-800 AM/FM Tuner, the 1977 Pioneer PL510 record player that is positioned just above the DENON CD player just out of the picture view, plus the black 1987 DENON DCD-900 CD player itself. All of these devices are still up and working right here in the year 2020. It just blows my mind that despite most of them being 42-43 years old, they still keep on going. Only minor repairs were required, such as me having to oil the DENON CD player worm gears to stop it from skipping while playing. And of course there is my 10 year old SAMSUNG LN32C350D1DXZC 32" TV. It quit working at one point, but it was an easy repair that took about an hour and required no new parts. I just had to clean some internal electrical connector contacts that had oxidized a bit.
I appreciate the craftsmanship, but it's clear you're not an audio guy. I cringed when you just sealed those whiskey boxes up with no insulation or treatment inside. There was absolutely no thought gone into the interior of the boxes to enhance the sound. May I suggest you watch a few videos from Steve Meade if you actually want to make speaker boxes that sound decent. Fun and interesting project no doubt, but a little more attention to the audio and you could have had MUCH better sounding apeakers.
@@DreiGuapo Terrible project, looks bad, sounds bad and it's just a speaker inside a cheap mini barrel. Of course it sounds bad. Also terrible repetitive royalty free music he uses in every video.
To all the people dissing the sound you have to keep in mind he's recording sound from an open space. This isn't a recording studio. Considering the distortion isn't really that bad given the conditions I would conclude it's not too bad for an amateur. While it's not as good as one you could by many of you are missing the point. Learning. The 1st car stereo I did was horrible compared to what I have now. I learned a lot from doing it and now I have it exactly how I want it. I have 0 distortion through the entire range of volume.
That doesn't matter lol. The speaker's sound is ruined by the lack of tuning and fixing up the box. The speaker is just bouncing air in and out of that box
@@bean5000 it does matter. The primary point of diy is to learn
@@systematic101 well he didnt learn well if he made this lmao
It's just a speaker in a mini barrel, of course it sounds bad, it's not made for this, it's too small and it's very low quality thin wood.
Before you put your horrible comments.. create your own first. and will see if its better than this guys doing.. or just appreciate and respect his creativity.
Niño Poblete Exactly half of ye wouldnt have half the skills and creativity to think of this!
I built two tower speakers back in the 80's. Everyone that seen and heard them were awe struck of the design and the sound, and most of the speakers were salvaged from other speakers, except for the horns, and I did this back when I was working 10-12 hour shifts 6 days a week, and I still had time to build it. The only reason I stopped doing these kinds of things is that I no longer have my workshop. This is a lot easier than you think, but people are right, it is now better to buy a Bluetooth speaker especially portable with a battery. I have been running JBL's paired with my other computer for years, and the nicest thing is being able to grab both JBLs and take them anywhere in the house while they are playing music from the computer. On my main computer I have Pioneer DJs with Bluetooth which are nice, but the speakers are wired, so you just can't grab them and move them around and they are constantly plugged in, meaning you just grab and go easily. More or less I regret buying them now.
i think it woman - nails so long!
I made at least 13 in 7years went from decks & amps to just chips he did good
Nicr man
Задумка отличная,но чисто для красоты.
Ставлю класс!!!!!!!!!!!!!!!
для красоты это если аккуратно сделать. а это халтура
sí amigo totalmente de acuerdo con vos, cuanta sabiduría papa
To everyone saying it sounds terrible:
You do realize first this was recorded on a mic, then filtered by RUclips, then played on your most likely shit phone speaker.
How bout y'all talk on subject you at least have some clue about. Even if it isn't the best, this man put his time into it and I bet it's worth somethin to him.
Nice design.
Good idea to use the b1205s to avoid a ground loop. The vu meter is nice 2!
At this moment I am building a 2.1 boobox with parts of an broken home cinema set.
I have some suggestions:
- add damping material to the satellites and the subwoofer. It will improve the sound quality.
- mount the amplifier in a better way....now its just hanging on its knobs
How is the amplifier?
Previous versions where very noisy.
And is there was a big plopping noise when you switch on the power supply.
Is this one improved?
R vD nice built isn’t the word for this build the guy doesn’t know anything the sub is so shitty
OP bro 👍👍👌👌😘😘😘
, I've seen so many people build speakers and spend so much time and effort and then in the end.........
NO POLYFILL AND OR INSULATION WHAT SO EVER !!!!!!!!! WRONG thing to do people. CMon, you know better than just to have a bare cabnet.
yes my dude you get me!
Exactly
Agreed
It's because he doesn't want to spend extra money on some stupid foam.
RazerDash TM its not stupid foam its very important for sound quality, and its cheap
СУПЕР ЛЮТЫЙ КОЛХОЗ! А задумка хорошая
Trabalho de mestre ,ficou lindo e deve ser bem potente !
❤❤❤❤❤
低音是散的，DIY精神不错！
One of my favorite speaker creations by you.
Woow nice 🤩🤩
Идея отличная, немного только доработать конструкцию нужно.
В плане демфирования и проклейки корпуса?
Сергей Сирук, да. По сути, здесь много чего можно ещё изменить, либо в угоду дизайна, я бы подобрал другие динамики для колонок, так и в плане качества.
@@alekssnake3212 Имеете ввиду про чувствительность?
Чтобы соглосовать динамики между собой?
Сергей Сирук, нет, я имел ввиду на данный момент по дизайну, по мне, хотелось бы чуть меньше в диаметре, визуально так будет смотреться симпатичнее, но это на мой вкус, да и при меньших габаритах динамиков, подобрать их будет труднее по качеству. Что же по техническим характеристикам, думаю автор ролика всё же подбирал подходящие динамики и по чувствительности, и исходя из размеров самого корпуса (это который для бутылок из-под виски) :-) Но так как саму музыку мы слышим через RUclips, не совсем понятно на сколько хорош звук, хотя я слушал через нормальные полноразмерные наушники и в принципе мне понравилось. В этом смысле я и имел ввиду, что придётся возможно доработать под себя, да и в целом, так как у каждого из нас, слух и музыкальные предпочтения разные, соответственно и тестирование лучше проводить сидя рядом, а не онлайн, заранее запастись разным музыкальным материалом и вполне возможно, после тестирования вылезут какие ни будь огрехи.
А так комплект получился классный, с удовольствием сотворил или заказал подобный, так как не имею подобного бочёнка и всего остального под рукой :-) )))
это наихудшая идея! чувак так только бочонок испортил! без рассчетов, тонкие стенки, динамик в торец корпуса... как итог, и это отчетливо слышно на записи,- бубнелка-перделка!
Que bonito y potente equipo de sonido. Ingenioso proyecto de un barrilito de vino. Buenísimo. Felicitaciones.
faltou vedação das caixas, principalmente nos LED aonde o ar vaza, fazendo que o som seja um totalmente distorcido e feio, e faltou também preencher as caixas com manta de poliéster, seria interessante uma versão 2.0 nesse projeto
Faz um vídeo da mesma forma passando essas informações para nós!
Você te m a relação dos itens usados neste video? Gostaria de fazer e achei interessante seu comentário sobre a manta, seira simplesmente encher os vazios com ela?
Классная система в баню!😉
yes...here's proof positive! sometimes it's better to buy rather than to make. oh dear, it sounds terrible.
That's true (when it comes to the stuff this guy builds).
Agreed! But it still was a fun project, and looks cool for the particular setting. :)
Its custommade,where do you think you can buy a custommade?😉
One eyed monster Cyclops!
i agree with you...
Дизайнерское решение!!! Однозначно LIKE!!!
Bro these midwoofers do have very good bass even without that sub
the sub got less bass than them, it's so f*cking crapy...
loud bass midrange*
loud bass everything’s crappy
Quá hay tôi
Great Project :) But, you can use a Protection layer for the Speakers 😊
хо8х
A big fat like from me, I love this thing.
Exlent job nice creativity
the subwoofer is awesome.
havy magnet speakers.
Все отлично.Но вот музыка не для теста этой гарнитуры.Басс тест для саба устроить неплохо было бы
Good and beautiful to listen music on your house!! But it has so good sound?!!
TGRC nah. No insulation and too small of an enclosure
TGRC on your house???
Bad design.
@@dandavid513 0
11:00
Cần tìm đồnh hương Vn lạc lỗng quá
Nước ngoài xem k kênh này kiếm tiền gấp mấy lần kênh khác
Tui
hế nhô
Trần Hữu Chí Vĩ Ngộ Vinh Quảng hello
People, as long as you build a subwoofer enclosure to spec of the subwoofer, and build a port properly sized and tune to the Box, it will sound great! There is no need for polyfill or any insulation. Especially if you are building enclosures extremely close to proper specifications. Putting shit inside of your enclosure means you lose internal volume, granted polyfill doesn't take up much volume. Normal cabinet speakers that are in a sealed enclosure *should* have polyfill on the inside. That's not a recommendation it's almost a standard at this point. But any subwoofer or enclosure that is ported does NOT need any insulation. It's an extra step that is not needed and does not improve quality of sound. The thing that improves quality of sound the most is ample air room and a good sounding amplifier and speaker combo. If you have shity equipment, even with the perfect enclosure, you will have shity sound. If you have decent equipment and a really good enclosure you will have a decent sound. That goes the same the other way around, you can have the best equipment in the world but if you don't have the knowledge to build a proper enclosure it will sound like garbage.
Turning 4 days into 13 minutes is the amazing part.
Ziemlich geil gemacht
VERY AWSOME WORK LIKE IT
11468шгнеек468
1736543у112457880й2к35325
Vraiment Super cette Enceinte Bluetooth Maison. Bravo !
The full ranges is very high quality and 100w subwoofer
Those are Sonos play 1 speakers
Wooooow!!!!! Impresionante 😍😍😲😲😲
Wow Bass man! Your are simply amazing .wow!
I am a huge fan of you and your team!
ШИКАРНО!!!👍👍👍
Excelente trabajo ,podría compartir el linK de la descripción de materiales
joo joo que pedazo de sonido, de lujo. super like
"alright lemme test my subwoofer"
*Plays soft electro*
Zersdan C12 Днила
It should be forbidden to play soft electro on a 100w subwoofer
G genero hombre mujer es el destinatario de este mensaje por error por favor
Eduardo 😄 y el de portada ir al u y que ases chula q ases pilar de la casa de mi papá que me dijiste de que el día de mañana y te lo envío en adjunto envío el comprobante fiscal digital e impreso
Yeah, using shitty EDM music is not the way to test this subwoofer
Bardzo dobra robota Majster 👍🇵🇱
Is that scotch any good?
Nope.
Till now the best looking speaker.
The work is not clean, the idea is good but the realization is a disaster
Đẹp quá 😍
Where do I get this empty containers?
Onde consigo esse recipientes vazios?
Очень крутая вещь получилась.
Great work man. You have put a great effort building it. I know it's fun to build it. I too like to build diy stuffs.
Felicidades. Amigo. Muy. Bonito. Aparato
can you make speaker from nothing?
WoW
Even in alchemy there's a rule/law.
"You cannot gain anything without first giving something in return. To obtain, something of equal value must be lost."
Yes you can use anything
nothing comes out of nothing
Nothing from nothing leaves nothing and you gotta have something if you wanna be with me ----Billy Preston (written in a dressing room of an Atlanta night club in 1974)
Yesssss....that is called real diy project👏👏👏👏👏👏👍👍👍👍👍👍👍👍👍at least he try something new ....
That song is Alan Walker the spectre plys that is my fav song
супер бомбезная самодеолка так держать и музыка топ
Ficou show, parabéns!
Gut
J Kapıdayım
Paulo Cosme hhhggjmkjknmjmnngth
everyone complaining about how bad the sound is. from what I can hear on my monitors it's just the mic picking up tons of reverberation from the room and soft clipping the mic quite a lot. and then the translation onto your system could make the sound you hear way off from what you hear in person. Microphones can never reproduce the true sound that speakers make it person :) And honestly pretty good components in the stereo speakers and a lower end subwoofer driver it wouldn't sound the best but wouldn't sound the worst. Meanwhile only spending 80$ on a set of speakers that would compare to a 200$ set of logitechs. also with a few modifications, these could sound WAY better! If you just read all that, I just wanted to thank you :) have a good day ;)
A không
Lesson learned...buy a 2.1 bluetooth audio board 😁
Andrew Solis lesson 3 don’t build this because it’s not worth your time
Shut up
Lesson 4 learned don't use a low w amplifier for a high w speaker
@Stimpy&Ren so where can i study em?
@Stimpy&Ren but what language?
Very good song quality and nice idea also a lot of bass
Thanks.nice video.
great video!!! I use this same method to build speakers all the time!!! can also nmake them portable by powering with rc car battery as well!! Anyone wanting to build something like this, you can buy all this stuff on ebay, the bluetooth adapter is only like $5.00 and most audio amp board are 5-25 depending on choice
Hey there sir! Question: What is the name of the drill thing you use for the subwoofer element? I kinda always wanted to know what those things are called:D Nice vid! have a nice day!
its called Circle Cutter or circular cutter (for wood) ;)
Wclwdmwflhqdglnbvmzmzmzmmz a Dios 👍👍
Good job
How to build a homemade speaker with possibly the worst back ground music of all time .
Nkt
I do also dont like the background music
its not a how to biult its a "building a bluethooth speaker" for him not for you ok?!!
Trend Steel theres one think that restricts channels like this to use good songs
*copyright*
the music in these videos is *copyright free*
I
Eres un profesional
That's great, I like That.
Video rất hay, cám ơn bạn ạ!
MT show cara, da ora mesmo
So talented 👍👍
Испортил такую кайфовую бочку...
Можно фазоинвертор переместить и пихнуть тот пакет с краником обратно
колхоз в квадрате
Gapnhaucuoinam
This isn't have bass, and don't have 100w.
This look very good but The sound is brilliant, not much bass.
Rất cảm cơn phát minh của bạn
Sounds like in glass bottle. 100% ideotism.
I think it’s a very cool project!
I bet if he uses a better setup for recording it will sound a lot better.
Also, I wouldn’t use a separate Bluetooth receiver but a amplifier with Bluetooth on board, you can get that for like 10 bucks.
Уверен звучит это просто отвратительно, объема для ФИ в сабе мало, порт вообще не пойми что! Зачем было подобие порта в шириках делать вообще не ясно, в обычном ЗЯ играло бы значительно лучше. Само исполнение супер грязное, от фиксации всех динамиков, до отделки диодов. Идея прикольная, но знаний в построении акустики просто 0 и желания сделать красиво тоже. Отвратительно, а после этого ещё говорят что кастомные системы плохо звучат... Не удивительно
ойойой, умник нашелся...
Лайки ставят за видос, а не за колонки) Видос смотрибельный и интересный. Полтора ляма просмотров. Коменты излишни)
@@GrigoriiVein ага. Миллионы мух не могут ошибаться...
даже с плохим микро при записи с более менее норм акустикой звук был бы лучше, а тут вообще поганый=))) он либо полярность колонок не соблюдил=)
選曲も、最高❗❗❗👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
2.1 Bluetooth 😂 love how you bragged that other than that good job
What?
That 2.1 doesent mean bluetooth it means left and right audio
@David Andersson Wred oh ok
I don't think the crappy bluetooth modul he uses is even stereo, it's dual mono, lol
Por cierto muy buen video muchas felicidades te quedó chingon
verry well done,,,keep it up bro.💪💪
Muito show parabéns Brasil 👏👏👏👏👏👏👏👏👏👏👏👏👏👏😎😎😎😎
That reminds me of myself when i tried to built some speaker when i was young :)
2yyyyyuuuivvcç1111a1z1o2i8ilyayyey
Iu71
Ý2jjj3ikijgihshaHvzvzvvvvvvsjnikjkó jhaKkkbhjojkb
I built these speakers in my younger days 42 years ago. They still work as good as new today. imgur.com/a/VIARZn5
@@new-knowledge8040 damn they are some nice looking vintage speakers
@@randomweirdyoutubechannel8955 It takes two people to pick up and transport each of these speakers. I did have to repair the 15" woofers at one point in time several years ago. The out rubber rings that connect the paper cone to the metal chassis, had begun to literally turn to dust. But it only cost about $27 to purchase the ring replacements, which came with the glue, etc. Anyhow, I built those speakers in 1977. As for the rest of the stuff, you see my Soundcraftsmen PE-2217 audio equalizer from 1978, my 1978 AKAI 630D open reel to reel tape recorder, my 1977 Heathkit audio power amplifier, my 1977 YAMAHA CT-800 AM/FM Tuner, the 1977 Pioneer PL510 record player that is positioned just above the DENON CD player just out of the picture view, plus the black 1987 DENON DCD-900 CD player itself. All of these devices are still up and working right here in the year 2020. It just blows my mind that despite most of them being 42-43 years old, they still keep on going. Only minor repairs were required, such as me having to oil the DENON CD player worm gears to stop it from skipping while playing. And of course there is my 10 year old SAMSUNG LN32C350D1DXZC 32" TV. It quit working at one point, but it was an easy repair that took about an hour and required no new parts. I just had to clean some internal electrical connector contacts that had oxidized a bit.
@@new-knowledge8040 damn I bet all that must have cost a fortune but seems like it was worth it since it all still works
Awesome creation...
Please do some research into how to actually make speakers before posting stuff like this to "teach" people...
fabulous design bro . I haven't word for you.......
ImRaN Sk English?
this is freaking amazing!
9oo
Supper nice creation 👌
Bahut bhadiya
Vry 9ce video and your creativity osaam
Hey X Creation! The hi fi rocks though you can buy better parts, but please wear gloves next time!
My opinion
This is a cool idea and looks good!
Doesn‘t matter that the technical Solution is not optimal
Awesome!
But it sounds terrible so as a speaker its useless.
Yes... it needs to improve
i am searching high and low for months, for a pair of full range speakers like those ...... :/
Those are bad
logitech?
Look up, gr-research LGK 1.0, best full range speaker for under 200 (and will even rival 400-500 speakers)
gr-research.com/lgk10kit.aspx
Cameron Brown nice profile pic
Золотые руки аж я завидовал молодец 👍
God they sound amazing ! Oh no.. wait .. its my speakers.
Wow bro te quedo espectacular 😱👌👌👌
I appreciate the craftsmanship, but it's clear you're not an audio guy. I cringed when you just sealed those whiskey boxes up with no insulation or treatment inside. There was absolutely no thought gone into the interior of the boxes to enhance the sound. May I suggest you watch a few videos from Steve Meade if you actually want to make speaker boxes that sound decent. Fun and interesting project no doubt, but a little more attention to the audio and you could have had MUCH better sounding apeakers.
Tuyệt vời 😍
есть готовые усилители с блютуз
есть, на алиэкспресс посмотри, введи "Audio AMP with Bluetooth board"
виктор ершов Есть на жопе шерсть.Человек сам сделал
I love Speakers
Wrong wrong wrong wrong
WHY?
@@KingMinhvuong because its bad
это не is bad, это говно!!
Hugo .b can you explain how it's bad?
@@thesenamechangesareallowed4119 there is no insulation and thats not zo good
Sei un grande !!!
欲しいww
Excellent man.....
terrible speaker, terrible music
good creativity, good imagination.
yeah, true
@@DreiGuapo Terrible project, looks bad, sounds bad and it's just a speaker inside a cheap mini barrel. Of course it sounds bad. Also terrible repetitive royalty free music he uses in every video.