This mod revived this platform, im hunting a 4.3 2023 brz diff to do a budget drift build, literally anything manual and rear wheel drive local to me is junk gennys and BMWs for 10k with dumb high miles, 350/370z aren't going below 12k now, and BRZs are still strong at 15-20k
I have a 2008 is250 and my differential is acting up. Just wanna know if it's worth doing the brz/frs swap over the oem is250? Is a direct bolt on? Better than the oem? More expensive than used oem? Thanks
Does that fit the 3rd Gen GS ? saw some russian guys using the supra diff, just had to cut open the housing a little bit, wonder if this also works with the same method
These are NOT cheap in europe lol. I just ordered one for the equivalent of 780 USD incl. shipping. And it was the cheapest that I could find anywhere 😂 At least it will be an awesome mod
Already have a factory Torsen in my IS300 but potentially interested in this as it’s a lower ratio I believe, do you know how much lower? And if it throws the speedometer out? I’m guessing it’s lighter and not as strong as the original, but probably strong enough.
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
Nice to see is300 content back
Great timing! I’m putting my big brakes on today and have my Y38 waiting
Got the reseal video and should have install video out later this week.
i did the swap in my is300 along with the diff bushing. i dropped the subframe and also swapped my subframe bushings
Awesome video! Thanks for the part numbers! Now I just need to watch the next one.
It would be a life saver if those diffs fit on IS350.
ive done this y38 frs diff swap on my 2008 Toyota Mark X grx120 2.5 it was soo much fun while driving
acceleration was improved by much
This mod revived this platform, im hunting a 4.3 2023 brz diff to do a budget drift build, literally anything manual and rear wheel drive local to me is junk gennys and BMWs for 10k with dumb high miles, 350/370z aren't going below 12k now, and BRZs are still strong at 15-20k
I'm actually looking forward to doing this for my 2014 IS350. Adding an LSD..
Musisz szukać dyfra do is 350 z Lexus LS f sport rwd 36j
Isf 58j
Rcf 5.0 2GJ
Is 350 f sport rocznik 2018 w górę rwd 🙂
If I use the brz hardware will I not have to taper the holes to get the diff in?
So this y38 which is the best year to put on for a 2006 is250 manual?
Will the guts of the torsen diff fit in a GS housing?
No.
I have a 2008 is250 and my differential is acting up. Just wanna know if it's worth doing the brz/frs swap over the oem is250?
Is a direct bolt on?
Better than the oem?
More expensive than used oem?
Thanks
Watch my install video.
Does that fit the 3rd Gen GS ? saw some russian guys using the supra diff, just had to cut open the housing a little bit, wonder if this also works with the same method
No. GS is different
GS 300 rwd gen. 3 będzie pasować.
These are NOT cheap in europe lol. I just ordered one for the equivalent of 780 USD incl. shipping. And it was the cheapest that I could find anywhere 😂 At least it will be an awesome mod
Already have a factory Torsen in my IS300 but potentially interested in this as it’s a lower ratio I believe, do you know how much lower? And if it throws the speedometer out? I’m guessing it’s lighter and not as strong as the original, but probably strong enough.
This is 4.1. If yours is auto is300, it’s 3.9. Automatic uses ABS sensors for speed so won’t be an issue. If you have manual, different story.
@@TunerwithKids thanks for the reply! Yeah it’s an auto so all good 👍🏻
@@TunerwithKids looking at the gearing calcs, it’s not different enough to be worth doing imo.
Does the FA24 one work as well? Or only the Y28?
Not sure what the FA24 is. But the torsion from IS300 and BRZ/FRS all fit is250
It's the 2023 models differential! Will keep poking around to see if there are any differences! Welcome back btw! @@TunerwithKids
The newer BRZ uses a 4.3 I believe. Same housing.
Does this diff also fit 2006 IS350 please ?
No different subframe.
@@TunerwithKids maybe refit the inside of one to the other ? Will that work ?
@ewon9285 different altogether.
Ok so I have an auto 08 is250. If I want to do this what do I need and how will it affect the car?
It bolts on. Will give better off line acceleration but lose top speed and higher rpm on highway so less gas mileage for highway.
@@TunerwithKidsI get about 25.5 mpg. How much do you think it will go down
Hey I have a auto does it matter if i get in that’s for a manual?
No it will work. Gearing for auto will be 3.9 up to 4.1 with this. Manual is 3.73 so it’s a big jump and will lost topspeed and gas mileage.
@@TunerwithKidsok so I would need the 4.1 brz/frs diff correct
Yes that’s the Y38.