I cant wait to see what are the upcoming videos of you using Tajima, I have just decied to buy one, and you are a big help and insprition to me and everyone here, please keep uploading!
Congrats on your new machine sir! You really can't go wrong with the Big 3. Tajima, Barudan and ZSK. Ultimately it will depend which has the best tech support nearby.
Congratulations!! My prediction is that you will have another Tajima and selling the Ricomas within the next six months. Having one ecosystem of machine is much easier for production, I can dial in a design on one machine then transfer the updated file to the other and start kicking out work. I sold my 9 year old Tajima and replaced it with another Barudan Pro3 earlier this year. Since I do more hats I chose Barudan, but the Tajima would out stitch it on flats. I can’t wait to see what kind of speeds you can achieve on this versus the Ricomas.
That’s fabulous.congratulations!!! I saw a Happy from Japan with the same features at a show recently. Looks amazing too. It cost the same as my ZSK sprint 7. I will be following your journey, because my next machine will be the Tajima like yours, or a Happy.
I currently own 2 TMBRs and love them. One 18 needle and other 15. One issue I came across was oiling and greasing, it was up until technician for my 2nd machine that I got got came out and walked me through. It’d be wonderful to see you go through that process with us.
How exciting, I’m just getting into embroidery for my business and already trying to figure out which commercial multi-needle brand to go with; I’m leaning towards Tajima. Looking forward to more of your videos putting this bad boy to work!
IDK if it's more of a ME problem, but i broke three presser foot shafts so far(TMBR1) & in my opinion DCP machines are not upto Tajima's quality benchmark and we are very disappointed by how much production issue it creates. please be careful. we never had a single problem with TUMX TEMX OR old legacy units. TMBP1(sister store) had an issue with USB controller within 2 years. and i hope this quality concern is addressed in 2 second gen models.
Hello Romero we are in the middle of purchasing an embroidery we saw the tc and now mt but we got an offer for the Tajima like yours, since you are honest do you recommend pay extra for the tajima or MT is a good choice, we are planning mostly for our custom apparel we sew. And thanks for the video
👏🏽👏🏽👏🏽 I've been looking at the same machine. I have the MT 1501 and I like it but I want the Tajima for hats specifically. What do you think about Candle thread, how does it compare to Madeira?
Hi Romero. I am looking into purchasing a Tajima. Curious to know why you picked the Tajima and why you went with that model specifically. Did you consider other brands of machines? Did you consider other models of the Tajima? I have a Ricoma MT-1501 that I need to get rid of and want to replace it with a better machine.
The craftsmanship played a huge role. Nothing wrong w/ my Ricomas but my Tajima just purrs when it stitches it out. Feature wise, the auto presser foot was a big one for me. Perfect for when Im doing 3D puffs.
The craftsmanship played a huge role. Nothing wrong w/ my Ricomas but my Tajima just purrs when it stitches it out. Feature wise, the auto presser foot was a big one for me. Perfect for when Im doing 3D puffs.
The craftsmanship played a huge role. Nothing wrong w/ my Ricoma’s but my Tajima just purrs when it stitches it out. Feature wise, the auto presser foot was a big one for me. Perfect for when Im doing 3D puffs.
Congratulations!!! I have a Ricoma MT1501 and have not been able to get the tension right in the 2.5 yrs I have owned it. They even sent a tech from Florida to adjust it; he spent 4 hours without any success. I have watched your tension adjusting video multiple times and still have not been able to get it right. PLEASE do a stitch comparison video with the Ricoma because the Tajima is on my list. Love your videos! Keep up the great work and thanks for all your experience, knowledge, and sharing
It sucks your machine is having a hard time getting it right. Really, both my Ricoma’s are running smooth. I do see some differences w/ the Ricoma’s and Tajima, i’ll make a comparison video soon. Thanks for the message.
Same. been looking at replacing my Ricomas too. So annoying to be fussing with it all the time. I am having a tech come out so fingers crossed otherwise I'm replacing.
About time you got a real industrial quality machine vs the garbage Ricoma… Ricoma is really 💩💩💩🤮🤮🤮 You should have opt for the TMEZ, but that’s my opinion… or at least the TFMX… We use Barudan C01 single head and 6-head Stretch because they’re the best for caps… and both models have 450x520 embroidery field. We run our Barudan 24/7 as we’re a Production Shop… no retail at all
Hi, I've been watching your videos for some time and have a specific question I've been trying to figure out whom to ask. I think you might have the answer for me. Any way I can contact you directly? Please advise, Rochelle Weiss
I cant wait to see what are the upcoming videos of you using Tajima, I have just decied to buy one, and you are a big help and insprition to me and everyone here, please keep uploading!
Congrats on your new machine sir! You really can't go wrong with the Big 3. Tajima, Barudan and ZSK. Ultimately it will depend which has the best tech support nearby.
Tajima is number 1 and the best machine for me , I have 6 of them. Congratulations!
Awesome! Thank you!
I have used tajima for 25 years. They strong and work horses.
Oh wow, good to hear, thanks for sharing.
Congratulations!!
My prediction is that you will have another Tajima and selling the Ricomas within the next six months. Having one ecosystem of machine is much easier for production, I can dial in a design on one machine then transfer the updated file to the other and start kicking out work. I sold my 9 year old Tajima and replaced it with another Barudan Pro3 earlier this year. Since I do more hats I chose Barudan, but the Tajima would out stitch it on flats. I can’t wait to see what kind of speeds you can achieve on this versus the Ricomas.
Congrats RT, can’t wait to see the comparison between the old and new machines!!!!
That’s fabulous.congratulations!!! I saw a Happy from Japan with the same features at a show recently. Looks amazing too. It cost the same as my ZSK sprint 7. I will be following your journey, because my next machine will be the Tajima like yours, or a Happy.
Tajima was number 1 on my list for my next machine. Congratulations!
Yes, I remember you mentioned that. I'll have lots and lots of videos!!!
I currently own 2 TMBRs and love them. One 18 needle and other 15. One issue I came across was oiling and greasing, it was up until technician for my 2nd machine that I got got came out and walked me through. It’d be wonderful to see you go through that process with us.
Congrats. So jealous! I can wait to be able to get one too! I have two Ricomas right now. My em1010 is so noisy.
Congratulations 🎉
Yes please. Explain how complicated it is too 😳🫨
Congrats Ever! I know you did your Due Diligence and can’t wait to see you do some amazing things with that Tajima.
Thank you!!
Awesome. Congrats
Thanks!
How exciting, I’m just getting into embroidery for my business and already trying to figure out which commercial multi-needle brand to go with; I’m leaning towards Tajima. Looking forward to more of your videos putting this bad boy to work!
Good choice. Good luck on your journey. Let me know if you have any questions.
Congrats and thanks for all you do 🫡
Congratulations - All of the very best to you and your family business plus All the great videos 😊
Congratulations. Enjoy. Very Happy for you.
Thank you so much!
Congratulations!! Lots of hard work!
IDK if it's more of a ME problem, but i broke three presser foot shafts so far(TMBR1) & in my opinion DCP machines are not upto Tajima's quality benchmark and we are very disappointed by how much production issue it creates. please be careful. we never had a single problem with TUMX TEMX OR old legacy units.
TMBP1(sister store) had an issue with USB controller within 2 years.
and i hope this quality concern is addressed in 2 second gen models.
Congrats, can't wait that you push the bad boy to the limit.
Where can I buy your book that’s launching next month. I live in Germany.
❤️❤️❤️❤️❤️ thank you for your content. I admired you ❤️
Congrats on the new equipment!
Thanks!
Super happy for ur shop!!
Thank you!
Very nice... look forwards to seeing this in use and what it's limits are..
I have a Melco Amaya xt and I’m gunning for a tajima.
Congratulations!!!
Thank you!!
Whats the difference you found in both
I have Ricoma currently but looking to add tajima soon
Hello Romero we are in the middle of purchasing an embroidery we saw the tc and now mt but we got an offer for the Tajima like yours, since you are honest do you recommend pay extra for the tajima or MT is a good choice, we are planning mostly for our custom apparel we sew. And thanks for the video
Congratulations cant wait to see it in action
Can you put both machines to a test?
If you were buying your machines over again, would you go ricoma or Tajima for your first purchase?
Question? Why did you choose Candle Thread over Madeira Thread? What is thread the best for hats?
Candle Threads has a clean looking sheen, especially with my 3D puff designs.
Congratulations
Thanks TTown!!
Good video thanks congratulations I have a bardan pro 3 single head 15 needle
Very nice!
👏🏽👏🏽👏🏽 I've been looking at the same machine. I have the MT 1501 and I like it but I want the Tajima for hats specifically. What do you think about Candle thread, how does it compare to Madeira?
Candle Thread has a nice clean sheen, makes our design pop out clean. I'll have stitch outs in my next video.
Romero, do they have good financing options? Can I ask how much it was?
🎉Congratulations!🎉
Thanks!!
Hi Romero. I am looking into purchasing a Tajima. Curious to know why you picked the Tajima and why you went with that model specifically. Did you consider other brands of machines? Did you consider other models of the Tajima? I have a Ricoma MT-1501 that I need to get rid of and want to replace it with a better machine.
The craftsmanship played a huge role. Nothing wrong w/ my Ricomas but my Tajima just purrs when it stitches it out. Feature wise, the auto presser foot was a big one for me. Perfect for when Im doing 3D puffs.
The craftsmanship played a huge role. Nothing wrong w/ my Ricomas but my Tajima just purrs when it stitches it out. Feature wise, the auto presser foot was a big one for me. Perfect for when Im doing 3D puffs.
The craftsmanship played a huge role. Nothing wrong w/ my Ricoma’s but my Tajima just purrs when it stitches it out. Feature wise, the auto presser foot was a big one for me. Perfect for when Im doing 3D puffs.
Run some Richardson hats with 3D puff please logo 3” tall
Great videos .. always!
I appreciate that
Price?
Does Candle thread run better than madiera? why do you use candle thank you
Candle Thread runs super smooth and I use it because of the way the colors stands out and shines.
@@RomeroThreads thanks for reply
Sick!!! Congrats!!!
Thanks Ruben!
RT, any new videos coming soon?
Thanks for asking! Yes, videos are coming. Been working hard on the book, but as soon as I wrap it up, its back to shooting videos.
Great! Can't wait to order a copy of the Book! The details you provide in your lessons are awesome! @@RomeroThreads
Which Tajima do you have
Tajima TMBR2
www.tajima.com/product/tmbr2-sc/
Great!!!!
It would be great if we could see the trainer train you.
That would be awesome!! I’ll see.
Congratulations!!! I have a Ricoma MT1501 and have not been able to get the tension right in the 2.5 yrs I have owned it. They even sent a tech from Florida to adjust it; he spent 4 hours without any success. I have watched your tension adjusting video multiple times and still have not been able to get it right. PLEASE do a stitch comparison video with the Ricoma because the Tajima is on my list. Love your videos! Keep up the great work and thanks for all your experience, knowledge, and sharing
It sucks your machine is having a hard time getting it right. Really, both my Ricoma’s are running smooth. I do see some differences w/ the Ricoma’s and Tajima, i’ll make a comparison video soon. Thanks for the message.
Same. been looking at replacing my Ricomas too. So annoying to be fussing with it all the time. I am having a tech come out so fingers crossed otherwise I'm replacing.
About time you got a real industrial quality machine vs the garbage Ricoma…
Ricoma is really 💩💩💩🤮🤮🤮
You should have opt for the TMEZ, but that’s my opinion… or at least the TFMX…
We use Barudan C01 single head and 6-head Stretch because they’re the best for caps… and both models have 450x520 embroidery field. We run our Barudan 24/7 as we’re a Production Shop… no retail at all
Hi, I've been watching your videos for some time and have a specific question I've been trying to figure out whom to ask. I think you might have the answer for me. Any way I can contact you directly?
Please advise,
Rochelle Weiss
Hello you can email me. 4everRomero@gmail(dot)com
Would you be so kind and explain where did you get the tajima machine? And roughly big Qs How much🫣
Congratulations 😊
Congratulations