@@scottcoleman7304 More efficient to do it that way, considering if you buy a combo kit from any of the major manufacturers it usually comes with both.
Two reasons to use this tool. 1. You only own one power driver/drill 2. Your working in tight spaces where 2 drills isn’t an option. It’s great until you snap the drill bit or the bit gets worn out so I carry a spare as backup. Pro tip use medium(blue) loctite on the set screws.
I have to drill also. The system is very good when you work outside on a fence and is hard to have 2 drills. If you work inside is better with 2 drills. This is how I tested and worked for me.
@@WorkSmart4U I’m gonna have to agree with the other guy. Two drills or manufacturing process it. Aka get the workpiece attached then comeback and predrill everything before sinking fasteners. Or if you are doing a deck with a kreg jig bribe a buddy with beer so he will run the other drill sinking screws right behind you.
juan gonzalez I am working with 2 drills for few years and know-how is it. When you have to move from place to place on a project is hard to have 2 of them with you. You don’t find it or is hard to take the screws and the 2 drills with 2 hands. I am working alone on my hobby project. I advise you to try it on a project for more than 2 hours and let me know. The price is 10$ soo. What is the problem with this system is that you broke the drill bit for predrilling 😔. I find a better predrill bit or a shorted one I think will be a great tool. For me as a beginner I think is a great tool and wanted to have it as fast as posible. Not everyone has two drills as beginner in my country. Thanks
Yep . Belt clips and 2 drills ... i've tried few quick release systems and are simply not reliable. They either take too much time or jam after few uses ...
Aquí opinan muchos que se creen expertos , que son los mejores y se las saben todas. Que más nadie sabe nada . Que son los únicos que conocen de herramientas . Y cuando vas a ver sus trabajos te das cuenta que son unos pobres Chapuceros del monton. / ese aditamento es útil y se suma a muchos más que siguen siendo perfectos para trabajar. / Sean humildes en su trabajo ... es la grandeza de un profesional
Craftsman made this exact tool 15-20 years ago. I have it in my garage right now. Not as useful as one might think. Especially in this day of impact drivers.
I have my friend but I don’t know if you beleive be but Is on my wishlist from years. Last year I finnaly get an Dewalt 887 impact driver and I am very happy. Is hard with the money in my Country because we don’t have that much money here and for hobby the tools are expensive.
Ah, I’ll just keep my apex with Phillips head in my impact and my countersink in my drill. That thing is way too clunky. I bet all kinds of diy handymen have bought that thing.
I bought this years ago. It would be so much better if it fit into an impact driver and not just a combo drill. It’s been at in my bit box unused for years
Отлично, если бы металл в зенкере был качественный. У меня два из трёх бракованные. Купил набор в кейсе. Сплошные сколы в резьбе зажимных винтов! Винты выпадают!!!
My drill has an easily removable chuck so i can just tighten a drill too the chuck so that the chuck and the drill is basicly one part And i can then change from the drill and to a bit by just swapping between them easily I can also just use the chuck as a screw driver or hand drill to make a pilot hole
It's ridiculous that the bit size for this doesn't fit a 1/4" impact. You must use this in a drill - It won't work in an impact. The old Craftsman set worked with a 1/4" impact.
I have a couple of these over the years. Really good for piloting/countersink and screwing floorboards down. When they get dirty it’s hard to get the bit out to flip it over though.
Had to get one of these what feels like forever a go. Used it to install cabinets. Worked great altho would be really tight in smaller cabinets. Also wore out the collar that held the removal bit in so it essentially became useless.
!!!! Remalo cuando haces presión para fijar el tornillo, se desgasta demasiado el hexágono q esta en la mitad de ello y se atora x q es aluminio y si genera el desgaste no hay reemplazo de la pieza y toca comprar otro, lo digo x experiencia...👍 👍👍 Saludos desde MANIZALES COLOMBIA👍🤙🤝
Good video. I have had a set of these from Kobalt and a set labeled Montana Tool. Not everyone has a dedicated impact driver, and this would be useful in harder woods or where you need to minimize the risk of splitting. I have worked in theater, and witnessed many an occasion where a well meaning volunteer overdrives a drywall a screw (or every screw) and completely splits a board(s) thereby weakening the corner of a flat.
What would stop me from getting this is I like to use my 1/4 inch impact for driving in screws. This is for a drill. For me I will just use my drill for drilling and impact to drive in the screws.
Some people said "use drill and impact". And it's the way to go but if for some reason it's not an option i suggest to use 1/4 hex drill bit and a 2" bit with an impact if possible instead of this.
Oooo man I stand corrected, Home Depot right now. 8 piece $24.95 and 12 piece $21.95, I know that looks like it should be the other way but it’s not. Sale on the 12 piece for 12 more hours :) after that it’s $33.59 and it comes in a little yellow case to put on your work bench to never use again. Haha good job Internet I’m going to buy it now :)
Just as easy if not faster to just pull the shank and replace it from the chuck. Better to use 2 tools though in either case the drill bit gunna get HOT
I have this. The two little screws in the countersink bit holding the drill bit often become loose, and the key that comes with the kit is not really the right size. Over the kit kinda sucks.
I have this. Its cute. But due to its size, its not really practical for serious construction jobs, or in tight spaces. Plus I'd prefer a holder with a sleeve
lol the whiners you’re talking about are real construction workers, that’s a shit bit and impact are made for setting screws, not drilling holes, DIYer 😂
@@goatseverything as I mentioned above, I'm a DIYer, not a construction worker. It works well for what it is. Your comment doesn't correct my statement.
Comprei um conjunto desse, aparentemente muito bom. Deu defeito com poucas vezes que usei. Siceramente fiquei frustrado. A ideia é boa mais não funciona.... Como usei pouco passou a garantia e se existisse e fiquei no prejuízo. A marca e excelente tenho tico tico da marca e não tenho nada a reclamar
Always a great choice just too bad I’m sure Dewalt is charging something like $29.99 for this little guy :( sad tool days all around when that’s the case :(
@@WorkSmart4U after I saw this I went to Lowe’s that morning. Saw it and said yea It’s not worth $30 to spend 5sec to just swap the bit. That’s just me. But I don’t no
I can do that. Normaly to change the bit is possible but when you need it again you will lose it sometimes. This system is very good outside when you have to move. For example when you make a fance.
A marca é boa, mas a ferramenta em si deixa a desejar. Comprei uma dessa, e com o passar do tempo começou a não segurar mais a parte móvel dela, onde sempre fica caindo . Deveria ser com mais magnetismo para segurar a peça sem que ela se desconecta sozinho mediante trabalho que está sendo realizado. Eu particularmente só uso máquinas da Dewalt, mas essa ferramenta aí não compraria novamente.
Where I use it: ruclips.net/video/oQRWcOBo8xg/видео.html
We're cn I buy it sir
Price
@@NirmalSingh-ny7ro 10$
Ok
Link send
I have a drill, and in impact driver, the impact drives the screws while the drill drills the holes. Also no need for the downtime of switching bits
Yup much better setup
@@scottcoleman7304 More efficient to do it that way, considering if you buy a combo kit from any of the major manufacturers it usually comes with both.
You are right. Not anybody can afford 2 drills and when you work outside to a face is better with this tool. I will make a movie.
@@WorkSmart4U If you can't afford a Ryobi kit with an impact and drill I feel bad for you, because even the Ryobi tools aren't that bad
@@Barbaratio I do but not anyone in my country. I am dreaming to get my hands on a impact drill from years and only last year I did it. So...
Two reasons to use this tool. 1. You only own one power driver/drill 2. Your working in tight spaces where 2 drills isn’t an option. It’s great until you snap the drill bit or the bit gets worn out so I carry a spare as backup. Pro tip use medium(blue) loctite on the set screws.
You are right
What you mean you need two drills what about the freaking tools that comes with the drill itself
@@ZEKAYPRO when you predrill the wood is easy with 2 drills because you don't need to change the bit every time.
💙💙💙💙💙🖤🖤🖤🖤
🖤🖤🖤🖤🖤🖤🖤🖤🖤🖤🖤🖤🖤💙💙💙💙💙💙💙💙💙💙💙💙💙❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤💎❤❤❤❤❤❤❤💎💎💎💎💎💎💎💎💎💎💎💎💎
Я обычное сверло на биту меняю быстрее, чем на видео
@@user-uj1zb2hw9j у меня их четыре. Но на шабашку беру только один. Самый новый)
@@user-om4xt3vy9o правильно, чтоб клиент цену не сбивал))!
For me this is the best tool for this kind of projects: ruclips.net/video/oQRWcOBo8xg/видео.html
When you already can't afford to have a separate drill and driver but can be convinced to spend 30 dollars on junk.
Sometimes when you are working outside is better then carry 2 drills and move around.
This is actually a very smart idea. Literally, just flip the bit over and save yourself some time and finding bits.
@@WorkSmart4U so what about having two bits? It's not the same? 🤨🤔
@@franciscobravo7157 For me no. Is not the same.
@@WorkSmart4U how many pieces your amazing tool has?
Two body... it's exactly the same. You just get impressed so easily.
Один шурик на повышенных со сверлом,второй на пониженных с крестовой битой. И нафига эти причиндалы(?)
I use it outside.
полностью согласен. а учитывая аццкий люфт сверла ее использлвание даже вредит. а вот фрезы для зинковки ничё такие.
Если ты где-то на верху то у тебя нет возможности таскать 2 шурупавёрта.
@@johannmoch3553 могу,просто поверь)
@@johannmoch3553 Right. I will make a video about that.
Pro tip: clean your bit before switching.
🙏 but how?
I use a small wire brush. Light strokes.
The Bearcat 🙏. I will do that
@@thebearcat4735 you clean it every time you flip it???
@@papitosabe why not? It will last a lot longer if you keep it clean.
Эта бита стоит дешевле второго шуруповёрта?)
English Please
@@WorkSmart4U Is this bit more expensive than the second screwdriver?
@@user-gl8if5ol2p no. This bit is 10 $
For me this is the best tool for this kind of projects: ruclips.net/video/oQRWcOBo8xg/видео.html
when you working fast , that sistem its not efficient, is better to have two drills , that the way I'm doing
I have to drill also. The system is very good when you work outside on a fence and is hard to have 2 drills. If you work inside is better with 2 drills. This is how I tested and worked for me.
@@WorkSmart4U
I’m gonna have to agree with the other guy. Two drills or manufacturing process it. Aka get the workpiece attached then comeback and predrill everything before sinking fasteners. Or if you are doing a deck with a kreg jig bribe a buddy with beer so he will run the other drill sinking screws right behind you.
juan gonzalez I am working with 2 drills for few years and know-how is it. When you have to move from place to place on a project is hard to have 2 of them with you. You don’t find it or is hard to take the screws and the 2 drills with 2 hands. I am working alone on my hobby project. I advise you to try it on a project for more than 2 hours and let me know. The price is 10$ soo. What is the problem with this system is that you broke the drill bit for predrilling 😔. I find a better predrill bit or a shorted one I think will be a great tool. For me as a beginner I think is a great tool and wanted to have it as fast as posible. Not everyone has two drills as beginner in my country. Thanks
System guys, it's got a Y in there. Ok bye.
Yep . Belt clips and 2 drills ... i've tried few quick release systems and are simply not reliable. They either take too much time or jam after few uses ...
Omg the attachment I've never wanted
Why?
Haha exactly how is this useful over just another bit or switching to another drill
G K outside on a feance that you have to move.
For me this is the best tool for this kind of projects: ruclips.net/video/oQRWcOBo8xg/видео.html
This has been around for 40 years....
And yes they are awesome to have.
In my country arrived this year.
For me this is the best tool for this kind of projects: ruclips.net/video/oQRWcOBo8xg/видео.html
Aquí opinan muchos que se creen expertos , que son los mejores y se las saben todas. Que más nadie sabe nada . Que son los únicos que conocen de herramientas . Y cuando vas a ver sus trabajos te das cuenta que son unos pobres Chapuceros del monton. / ese aditamento es útil y se suma a muchos más que siguen siendo perfectos para trabajar. / Sean humildes en su trabajo ... es la grandeza de un profesional
☃️☃️☃️☃️☃️☃️❄❄❄❄❄
Disculpa, sabes cómo se llaman esas herramientas, esa abellanadora y ese acople?
@@luismiguel-hd6jl ahí en el título del video esta amigo así lo puedes buscar en ebay o Amazon!!!
DEWALT drill flip drive puedes buscarlo así amigo.
Te invito a ver tu trabajo y tu muestrame el tuyo. Quiero ver si así como roncas duermes...
Remember switching to other weapon is quicker than reloading... If you know what I mean.
I know.
For me this is the best tool for this kind of projects: ruclips.net/video/oQRWcOBo8xg/видео.html
Craftsman made this exact tool 15-20 years ago. I have it in my garage right now. Not as useful as one might think. Especially in this day of impact drivers.
For me is ok. When you work outside ans you have to move is better than 2 drills.
I have a cobalt one and it broke
Kinzie Burton how do yoh like the sistem?
Все новое,- это хорошо забытое старое.
For me this is the best tool for this kind of projects: ruclips.net/video/oQRWcOBo8xg/видео.html
Still guys , it's a great idea 💡
I love it.
ruclips.net/video/njDS6u3Vn8I/видео.html
For me this is the best tool for this kind of projects: ruclips.net/video/oQRWcOBo8xg/видео.html
Eu ainda não tinha visto essa belezura ja me interessei 👍
English please
For me this is the best tool for this kind of projects: ruclips.net/video/oQRWcOBo8xg/видео.html
I've had this forever. Didn't ever expect to see it here.
Now You did it. In my country from this year.
For me this is the best tool for this kind of projects: ruclips.net/video/oQRWcOBo8xg/видео.html
Or have a drill and impact like everyone else
I have my friend but I don’t know if you beleive be but Is on my wishlist from years. Last year I finnaly get an Dewalt 887 impact driver and I am very happy. Is hard with the money in my Country because we don’t have that much money here and for hobby the tools are expensive.
Not everybody can afford 2 drills my dude
@@ferdblu1946 thanks
Impact drivers are mostly marketing hype, no need for need for that loud ass piece of crap. Drill is all most homeowners need.
@@rafb145 but they look so sexy
Ah, I’ll just keep my apex with Phillips head in my impact and my countersink in my drill. That thing is way too clunky. I bet all kinds of diy handymen have bought that thing.
Is good when you are working outside and have to move. Is easy.
V
For me this is the best tool for this kind of projects: ruclips.net/video/oQRWcOBo8xg/видео.html
😎 gostei muito parabéns pelo trabalho que você fais Deus abençoe muito vocês todos
Thanks I am glad you like it!
For me this is the best tool for this kind of projects: ruclips.net/video/oQRWcOBo8xg/видео.html
These are great for when putting cabinets together.
Is very good when you have only one drill or when you work outside.
good
@@IbrahimKhan-qu7cd 👌👍
For me this is the best tool for this kind of projects: ruclips.net/video/oQRWcOBo8xg/видео.html
I bought this years ago. It would be so much better if it fit into an impact driver and not just a combo drill. It’s been at in my bit box unused for years
Maybe they will make a new one to fin for impact. For me is very useful when I am working outside and you have to move.
Check out vcg constructions new video! I think that one is impact rated
Hobbs Gaming thanks
Yep me too! Its just too damned bulky. I found the Ryobi one is better and the bits are a bit tougher.
@@michaelcuff5780 I will wait for that one to arrive in my country.
По отзывам на всехинструментах спорная вещица. Ломается , по сути дорогая игрушка.
Yes I break few of them but I still use it. I will make a video with it.
800рублей это дорога?
@@mr.ba6au639 Во всехинструментах 1999 ₽
For me this is the best tool for this kind of projects: ruclips.net/video/oQRWcOBo8xg/видео.html
How do some people not understand how useful this is?
I love it.
But it's not, always have an impact driver and drill on me wherever I go, much quicker. Thing is kinda a gimmick
@@Barbaratio sometimes is better with this tool
For me this is the best tool for this kind of projects: ruclips.net/video/oQRWcOBo8xg/видео.html
Este eu tenho e recomendo... muito boa
Olá, onde comprar e qual nome dessa peça?
José Joaquim da silva vm.tiktok.com/ZMdYCbuUN/
For me this is the best tool for this kind of projects: ruclips.net/video/oQRWcOBo8xg/видео.html
Просто неудобная вещица!!
English please
Норм. Я такой пользуюсь
For me this is the best tool for this kind of projects: ruclips.net/video/oQRWcOBo8xg/видео.html
Отлично, если бы металл в зенкере был качественный. У меня два из трёх бракованные. Купил набор в кейсе. Сплошные сколы в резьбе зажимных винтов! Винты выпадают!!!
удерживающий винт мне подходит. сверло вместо этого сломалось.
Я бы купил второй шурик
For me this is the best tool for this kind of projects: ruclips.net/video/oQRWcOBo8xg/видео.html
And it came down on my mind that you were going to get a good time
👍
My drill has an easily removable chuck so i can just tighten a drill too the chuck so that the chuck and the drill is basicly one part
And i can then change from the drill and to a bit by just swapping between them easily
I can also just use the chuck as a screw driver or hand drill to make a pilot hole
Nice. I know that feature. Is nice to have.
For me this is the best tool for this kind of projects: ruclips.net/video/oQRWcOBo8xg/видео.html
It's ridiculous that the bit size for this doesn't fit a 1/4" impact. You must use this in a drill - It won't work in an impact. The old Craftsman set worked with a 1/4" impact.
Yes this is not for impact drills.
I have a couple of these over the years. Really good for piloting/countersink and screwing floorboards down. When they get dirty it’s hard to get the bit out to flip it over though.
crim7ind thanks for the tip.
For me this is the best tool for this kind of projects: ruclips.net/video/oQRWcOBo8xg/видео.html
Had to get one of these what feels like forever a go. Used it to install cabinets. Worked great altho would be really tight in smaller cabinets. Also wore out the collar that held the removal bit in so it essentially became useless.
Thanks
For me this is the best tool for this kind of projects: ruclips.net/video/oQRWcOBo8xg/видео.html
I have a much older version of this still works great I put a little WD-40 dry lube for bicycle chains in it every so many uses.
Thanks for the tip. 🙏🙏🙏
For me this is the best tool for this kind of projects: ruclips.net/video/oQRWcOBo8xg/видео.html
I bought $20 cordless cheap chinese drill for screwing, and with my stanley sbh i drill it. Come in handy.
Sometimes when you are outside is better with drill bit.
For me this is the best tool for this kind of projects: ruclips.net/video/oQRWcOBo8xg/видео.html
Idea: drill all your holes then switch the bit and then drill. You dont need this tool it’s basically just 2 bits but with extra steps
It easy than 2 bits. Sometimes is better then 2 drills.
And also when you counter sink holes typically you want the screw perfectly level with the board, and not 1/4 imbedded into the board
For me this is the best tool for this kind of projects: ruclips.net/video/oQRWcOBo8xg/видео.html
!!!! Remalo cuando haces presión para fijar el tornillo, se desgasta demasiado el hexágono q esta en la mitad de ello y se atora x q es aluminio y si genera el desgaste no hay reemplazo de la pieza y toca comprar otro, lo digo x experiencia...👍 👍👍 Saludos desde MANIZALES COLOMBIA👍🤙🤝
English please.
Saludos desde Ayacucho Perú
🙋🏻♂️
Good video. I have had a set of these from Kobalt and a set labeled Montana Tool. Not everyone has a dedicated impact driver, and this would be useful in harder woods or where you need to minimize the risk of splitting. I have worked in theater, and witnessed many an occasion where a well meaning volunteer overdrives a drywall a screw (or every screw) and completely splits a board(s) thereby weakening the corner of a flat.
🙏. Youa are 💯 right. Good to have tool if you don’t have 2 drills.
@@WorkSmart4U Just out of curiosity, you mentioned being in a different country. I’m here in the U.S. Where are you located?
@@jamesmocharski4803 I am from Romania.
For me this is the best tool for this kind of projects: ruclips.net/video/oQRWcOBo8xg/видео.html
This is niche use, u be better of having drill + driver than this, even the cheapest ones.
You are right but sometimes is better to use this tool.
For me this is the best tool for this kind of projects: ruclips.net/video/oQRWcOBo8xg/видео.html
Dewalt makes it look like they just invented this. Craftsman had this around for a couple of decades.
You are right.
Stanley also had.
Mantap mase
These have been around for like 15/20 years now
In my country arrived this year.
@@WorkSmart4U I’m sorry to hear my first set was Hitachi brand believe it or not then craftsman made a version
For me this is the best tool for this kind of projects: ruclips.net/video/oQRWcOBo8xg/видео.html
That's cool but it's limited to that small skinny drill bit...
Yes it is. For me was ok working outside and having to move with online one drill.
For me this is the best tool for this kind of projects: ruclips.net/video/oQRWcOBo8xg/видео.html
得偉的這種專用的雙接頭確實有很好用👍👍
English please
For me this is the best tool for this kind of projects: ruclips.net/video/oQRWcOBo8xg/видео.html
Muy bueno la broca y destornillador quisiera uno donde lo venden muy bueno. 👍
English please
For me this is the best tool for this kind of projects: ruclips.net/video/oQRWcOBo8xg/видео.html
Лет 10 назад такая фигня у китайцев мелькала, только поудобней, там вытаскивать не нужно было, а просто переворачивалось. Немного опоздали)
:)
For me this is the best tool for this kind of projects: ruclips.net/video/oQRWcOBo8xg/видео.html
You'd think it was Alien Technology reading the comments. 🤪
🤣🤣🤣
For me this is the best tool for this kind of projects: ruclips.net/video/oQRWcOBo8xg/видео.html
What would stop me from getting this is I like to use my 1/4 inch impact for driving in screws. This is for a drill. For me I will just use my drill for drilling and impact to drive in the screws.
You are right. Not anybody will have 2 drills and are cases when it is easy to work with one drill.
For me this is the best tool for this kind of projects: ruclips.net/video/oQRWcOBo8xg/видео.html
Have a craftsman from the 90s that does the same thing. Never really used it. Always had an impact and drill.
Sometimes when you are working outside on a fance for example is very handy not to carry 2 drills with you
For me this is the best tool for this kind of projects: ruclips.net/video/oQRWcOBo8xg/видео.html
Even without this tool, DeWalt's drill does all this work If you use your brain
You are right.
For me this is the best tool for this kind of projects: ruclips.net/video/oQRWcOBo8xg/видео.html
Some people said "use drill and impact". And it's the way to go but if for some reason it's not an option i suggest to use 1/4 hex drill bit and a 2" bit with an impact if possible instead of this.
Sometimes when you work outside and you have to move is a tool good to have.
@@WorkSmart4U bro. It looks like you only work outside... what is the difference working outside or inside?
For me this is the best tool for this kind of projects: ruclips.net/video/oQRWcOBo8xg/видео.html
@@franciscobravo7157 For me this is the best tool for this kind of projects: ruclips.net/video/oQRWcOBo8xg/видео.html
For cabinet hardware ,nice
Yes, thanks. For working outside and move around is perfect.
For me this is the best tool for this kind of projects: ruclips.net/video/oQRWcOBo8xg/видео.html
I had that tool in 2001 thats not
new, I had it for doing custom
kitchens and baths...
In my country this year arrived.
For me this is the best tool for this kind of projects: ruclips.net/video/oQRWcOBo8xg/видео.html
It will have its uses.
But if u do enough diy / work to have to buy this bit. You probably already own two drills.
(Hammer and driver)
Probably but sometimes is easy to use just this bit.
For me this is the best tool for this kind of projects: ruclips.net/video/oQRWcOBo8xg/видео.html
What a wonderful tool !!!
🙏 thanks
For me this is the best tool for this kind of projects: ruclips.net/video/oQRWcOBo8xg/видео.html
Muy práctico! Buenísimo.
🙏
For me this is the best tool for this kind of projects: ruclips.net/video/oQRWcOBo8xg/видео.html
Oooo man I stand corrected, Home Depot right now. 8 piece $24.95 and 12 piece $21.95, I know that looks like it should be the other way but it’s not. Sale on the 12 piece for 12 more hours :) after that it’s $33.59 and it comes in a little yellow case to put on your work bench to never use again. Haha good job Internet I’m going to buy it now :)
🤣👨🔧👨🔧
Amazon had the 12 piece for $14 a few years ago...i should have gotten a couple
papitosabe not a bad ideea
For me this is the best tool for this kind of projects: ruclips.net/video/oQRWcOBo8xg/видео.html
They are great till the drillbit breaks or gets blunt.
You are right.
Great I like it! It seems to me craftsman had a similar tool awhile ago.....
Thanks
For me this is the best tool for this kind of projects: ruclips.net/video/oQRWcOBo8xg/видео.html
Probably more useful with a metal keyed chuck that you can’t open and close super easy
For me this is the best tool for this kind of projects: ruclips.net/video/oQRWcOBo8xg/видео.html
I think Makita came out with those in the late 80s. I used to use them all the time.
In my country just arrived this year!
@@WorkSmart4U it's a great little tool. if I remember correctly you can also get different size countersinks.
@@paddlefaster I don't know that.
For me this is the best tool for this kind of projects: ruclips.net/video/oQRWcOBo8xg/видео.html
I have it, not bad not fantastic i got it at Walmart, i had to return one because it got stuck they just need to polish the idea
I love it. I will make a video about that.
For me this is the best tool for this kind of projects: ruclips.net/video/oQRWcOBo8xg/видео.html
That's cool and handy and all... but these tip attachments are getting as long or longer than the gun itself lol.
ruclips.net/video/oQRWcOBo8xg/видео.html
Nice tools. thanks
You are welcomed
For me this is the best tool for this kind of projects: ruclips.net/video/oQRWcOBo8xg/видео.html
Just as easy if not faster to just pull the shank and replace it from the chuck.
Better to use 2 tools though in either case the drill bit gunna get HOT
The problem is that moving around sometimes you lose it. This is very good when you work outside on a fence for example.
For me this is the best tool for this kind of projects: ruclips.net/video/oQRWcOBo8xg/видео.html
Lo tengo, y en la práctica si bien es útil, no es eficiente. Eso si, además del buen avellanador, el dispositivo es de muy buen material
I use it outdoor: ruclips.net/video/oA1ggfq-8zw/видео.html. It this easy to work with this tool than 2 drills.
I’ve got the set but the drill/bit doesn’t lock into place I’ve been sold a dud and as I can’t find the receipt I can’t get a refund or replacement??
I don’t have any ideea
Es muy útil lo compre hace un par de años!!!!
Como se llama esa herramienta
@@SCRAPPI01 DEWALT Drill Flip Drive countersink drill bit
Gracias
For me this is the best tool for this kind of projects: ruclips.net/video/oQRWcOBo8xg/видео.html
hooray, you saved 1 minute.
😃
For me this is the best tool for this kind of projects: ruclips.net/video/oQRWcOBo8xg/видео.html
Kobalt has had one. Theirs is made by Montana but cost less.
Nice. When will be available in my country I will try thta one too.
For me this is the best tool for this kind of projects: ruclips.net/video/oQRWcOBo8xg/видео.html
I have this. The two little screws in the countersink bit holding the drill bit often become loose, and the key that comes with the kit is not really the right size. Over the kit kinda sucks.
I don’t have the kit. Only this tool.
For me this is the best tool for this kind of projects: ruclips.net/video/oQRWcOBo8xg/видео.html
Que útil esa harramienta
Yes it is.
Nice! I want one!
vm.tiktok.com/ZMewL6g4o/
For me this is the best tool for this kind of projects: ruclips.net/video/oQRWcOBo8xg/видео.html
It would be really smart .. if u could put a link to where to find these suckers at
You are right. I will that in the future. vm.tiktok.com/ZMe3yUtoj/
For me this is the best tool for this kind of projects: ruclips.net/video/oQRWcOBo8xg/видео.html
I need likethis one.
vm.tiktok.com/ZMdtN6soa/
For me this is the best tool for this kind of projects: ruclips.net/video/oQRWcOBo8xg/видео.html
This would not be a problem if ya just had dually drills
When you work outside and you have to move is very good.
For me this is the best tool for this kind of projects: ruclips.net/video/oQRWcOBo8xg/видео.html
The only thing I don't like when the screw shakes alot
Yes is posible.
For me this is the best tool for this kind of projects: ruclips.net/video/oQRWcOBo8xg/видео.html
extraordinarily great drill bit, it can be used to launch our work, can you order it, sis?
I use it outdoor projects like this: ruclips.net/video/oQRWcOBo8xg/видео.html. You can order from Amazon. Look for dewalt flip bit.
PZ саморез крутить битой PH это очень умно...
Thanks
For me this is the best tool for this kind of projects: ruclips.net/video/oQRWcOBo8xg/видео.html
Great product. Consider a T-20 Torx bit instead of Phillips.
Thanks. I will do that. I love it!
@@WorkSmart4U I should say any Torx size. The grip is amazing. No strips.
@@tumbleweed1976 I work with torx also: ruclips.net/video/Dic--4bhoPg/видео.html
For me this is the best tool for this kind of projects: ruclips.net/video/oQRWcOBo8xg/видео.html
I have this. Its cute. But due to its size, its not really practical for serious construction jobs, or in tight spaces. Plus I'd prefer a holder with a sleeve
The size is not the biggest key point. Is very useful when you work outside and you have to move and not carry 2 drills with to. My point of view.
For me this is the best tool for this kind of projects: ruclips.net/video/oQRWcOBo8xg/видео.html
I've had and used one of these for many years. Lots of whiners here, but it's handy for me as a DIYer.
Thanks. That is good to know.
lol the whiners you’re talking about are real construction workers, that’s a shit bit and impact are made for setting screws, not drilling holes, DIYer 😂
@@goatseverything as I mentioned above, I'm a DIYer, not a construction worker. It works well for what it is. Your comment doesn't correct my statement.
For me this is the best tool for this kind of projects: ruclips.net/video/oQRWcOBo8xg/видео.html
Comprei um conjunto desse, aparentemente muito bom. Deu defeito com poucas vezes que usei. Siceramente fiquei frustrado. A ideia é boa mais não funciona.... Como usei pouco passou a garantia e se existisse e fiquei no prejuízo. A marca e excelente tenho tico tico da marca e não tenho nada a reclamar
I use it few times working outside and It was very good for my even If a have a lot of drills.
For me this is the best tool for this kind of projects: ruclips.net/video/oQRWcOBo8xg/видео.html
Dewalt is life
Very good tool
For me this is the best tool for this kind of projects: ruclips.net/video/oQRWcOBo8xg/видео.html
Massa demais, top 👏👏👏👏
🙏
For me this is the best tool for this kind of projects: ruclips.net/video/oQRWcOBo8xg/видео.html
A mí me duró solo unos cuatro meses y no le daba mucha batalla , el material es muy delicado no sirve para trabajos duros, compre dos y lo mismo
I work with soft wood and for me is ok. I will make a video about this.
For me this is the best tool for this kind of projects: ruclips.net/video/oQRWcOBo8xg/видео.html
Always a great choice just too bad I’m sure Dewalt is charging something like $29.99 for this little guy :( sad tool days all around when that’s the case :(
You can buy it for less
@@WorkSmart4U after I saw this I went to Lowe’s that morning. Saw it and said yea It’s not worth $30 to spend 5sec to just swap the bit. That’s just me. But I don’t no
@@Thunder_Dream_Designs mine was 10$.
For me this is the best tool for this kind of projects: ruclips.net/video/oQRWcOBo8xg/видео.html
Essa eu não esperava
Ну если ещё там можно сверла менять с битами в зажиме, то совсем нот бэд.
English please
Наверное стоит как пол шуруповёрта🤨
For me this is the best tool for this kind of projects: ruclips.net/video/oQRWcOBo8xg/видео.html
genius idea
For me this is the best tool for this kind of projects: ruclips.net/video/oQRWcOBo8xg/видео.html
Probably a dumb question but why not use a regular drill bit lol what’s so special about that ?? Someone please explain
I can do that. Normaly to change the bit is possible but when you need it again you will lose it sometimes. This system is very good outside when you have to move. For example when you make a fance.
@@WorkSmart4U awww okay thank you
For me this is the best tool for this kind of projects: ruclips.net/video/oQRWcOBo8xg/видео.html
I like it :)
Thanks. Me too.
For me this is the best tool for this kind of projects: ruclips.net/video/oQRWcOBo8xg/видео.html
Yeah this is only been around for about 15 to 20 years now
New in my country.
For me this is the best tool for this kind of projects: ruclips.net/video/oQRWcOBo8xg/видео.html
breathin's kinda labored there, buddy.
you alright?
Thanks. After Covid not 100% recovered.
@@WorkSmart4U I'm incredibly sorry to hear that.
I hope the best for you, and look forward to more content.
Thanks. I will post more.
@@TSAlpha2933 Thanks. I will do that.
For me this is the best tool for this kind of projects: ruclips.net/video/oQRWcOBo8xg/видео.html
Bueno asta q vi todo el video y creo q para q la madera no se raje esta vien a hora si veo q funciona
For me this is the best tool for this kind of projects: ruclips.net/video/oQRWcOBo8xg/видео.html
La quierooooo!!
Where I use it: ruclips.net/video/oQRWcOBo8xg/видео.html
Dewalt monamour wow.
Thanks
For me this is the best tool for this kind of projects: ruclips.net/video/oQRWcOBo8xg/видео.html
Nice tools 👍👍👍👍
Yes it is: ruclips.net/video/oQRWcOBo8xg/видео.html
We are not going to countersink it we are submarining that shit!
Yes you are right: ruclips.net/video/EeZCw-QfvIk/видео.html
For me this is the best tool for this kind of projects: ruclips.net/video/oQRWcOBo8xg/видео.html
Mũi khoan rất tiện lợi
ok
A marca é boa, mas a ferramenta em si deixa a desejar. Comprei uma dessa, e com o passar do tempo começou a não segurar mais a parte móvel dela, onde sempre fica caindo . Deveria ser com mais magnetismo para segurar a peça sem que ela se desconecta sozinho mediante trabalho que está sendo realizado. Eu particularmente só uso máquinas da Dewalt, mas essa ferramenta aí não compraria novamente.
English please
For me this is the best tool for this kind of projects: ruclips.net/video/oQRWcOBo8xg/видео.html