Amazing video mate. I'm glad that old Matiz/Spark doesn't have a weird ISO wiring, like most of modern cars. Yes, MANY modern cars have a "criminal" ISO connector, which looks like standard ISO, but if you plug it into your new nice shiny aftermarket radio, it bricks the radio immediately. You can throw it away, because the bastards (from the car industry) usually switch the power polarity on the connector, to burn any device that is not original. You usually have to buy a special connector harness in order to connect an aftermarket radio without destroying it. Glad to see that Matiz didn't implement that dirty trick (at least not the 2005 model).
Great and very helpful video. I have the following problem: The radio seems to work, can be amplified, play a disc, etc., but no sound comes out. Earlier, sometimes there was sound, sometimes not. Now there isn't. I opened it up and all the cables are plugged in and seem fine. I replaced all the fuses that are responsible for the radio, but no change. Any idea what can be done?
Is yours is the version with speakers in the doors then it’s possible either the damp has got to the speakers or where the cable passes through the rubber grommets near the door hinges may of snapped(common problem)
I've followed your guide and was really easy but now when i listen to radio it goes off when i put my lights original wires fit into my sterep can you help
Great, unfortunately my Matiz didn't come with a radio (basic trim) could i borrow your VIN in order to buy those brackets yours has ? Thanks in advance
Hi, can you tell me if it's the same for a Daewoo Matiz from 2001? I'm planning on doing this soon but i can't find anything for doing this on a 2001 model.
![2003-2008 Toyota Corolla Car Stereo Upgrade [1 of 3]](http://i.ytimg.com/vi/rtdx4FvYzC4/mqdefault.jpg)
![2003-2008 Toyota Corolla Car Stereo Upgrade [1 of 3]](/img/tr.png)
Amazing video mate. I'm glad that old Matiz/Spark doesn't have a weird ISO wiring, like most of modern cars. Yes, MANY modern cars have a "criminal" ISO connector, which looks like standard ISO, but if you plug it into your new nice shiny aftermarket radio, it bricks the radio immediately. You can throw it away, because the bastards (from the car industry) usually switch the power polarity on the connector, to burn any device that is not original. You usually have to buy a special connector harness in order to connect an aftermarket radio without destroying it. Glad to see that Matiz didn't implement that dirty trick (at least not the 2005 model).
Thanks that you make the effort to make videos like these man!
Большое спасибо! Сэкономил очень много времени. Нигде не мог найти толковой инструкции.
Пожалуйста
This helped me a whole lot, thank you for the video.🤝🏻
Great easy to follow instructions.
Very helpful content.Thanks a lot!
Great and very helpful video. I have the following problem: The radio seems to work, can be amplified, play a disc, etc., but no sound comes out. Earlier, sometimes there was sound, sometimes not. Now there isn't. I opened it up and all the cables are plugged in and seem fine. I replaced all the fuses that are responsible for the radio, but no change. Any idea what can be done?
Is yours is the version with speakers in the doors then it’s possible either the damp has got to the speakers or where the cable passes through the rubber grommets near the door hinges may of snapped(common problem)
@@PJsprojects I also have no audio coming out with the speakers on the dash. Any ideas what would cause it?
I'm going to try fit a new radio tomorrow.
Is this the same thing for the dawoo matiz 2003 ? Or is this different
Usefull video. Thnx mate👍
Is necessary to unplug the car battery?
What colour is the illumination/dimmer wire on the matiz. Its driving my stereos nuts when i have headlights on but its not orange on this lol
Great video.. Do you know where can I get a double din bezel or which double din bezel would fit a 2006 Chevy Spark?
Yes
Can I fit a double din the same way but just keep the pocket out?
I've followed your guide and was really easy but now when i listen to radio it goes off when i put my lights original wires fit into my sterep can you help
Thanks!!! Good Video!!!👍👍👍
Great! Helpfull content thanks
i hope my problem will solve thankou sir
Good video, my question is after you put in the stereo and turn the ignition on do you have to punch in a security code on the radio?
only for original radios
How did you beat the two little metal bits on the side panels? I’ve tried knocking them out with screws but can’t get them to come out!
Steam roller does the job.
How did he beat the two metal bits out?
Great, unfortunately my Matiz didn't come with a radio (basic trim) could i borrow your VIN in order to buy those brackets yours has ?
Thanks in advance
Sorry none of these cars in the videos belong to me, they are all just jobs.
Hi, can you tell me if it's the same for a Daewoo Matiz from 2001? I'm planning on doing this soon but i can't find anything for doing this on a 2001 model.
No, this is different from the '01 model. As you can see the instrument cluster is in front of the dashboard.
Is it possible to install a infotaiment system (computer board) in the middle ?
Anything is possible but it would not be easy.
Can I put a double din radio in a Chevrolet matiz
Excelente video👍
I got a problem with mine. If i turn the volume to the maximum I can not hear anything. Anyone knows why?
hi, could i ask what the aftermarket radio was? thanks
I don't keep records but I'm pretty sure that was a Pioneer 290DAB
What model is the radio
Yes its this one -
www.pioneer-car.eu/eur/products/mvh-s300bt
추억돋는차네
옛날 내친구 차가 저거였는데
En qué planeta estamos
Good example k ri on
The way this is filmed is a crime against humanity
It's not matiz it's Chevrolet Spark
what diameters have the screws that you screwed on the radio handles
Thanks for sharing your video with us , very good job
Excelente video👍