You are one of the last You-Tube true amateur builders. Great. I love it. You totally did it your own way, no convention on how to build motorcycles was left intact. I hope you stay safe because you look like a nice guy.
Your such one of a kind in you are doing well for what you have done, well creating things like this is not as simple for what you people comment to this guy, he is trying too hard to build this things, you know your motorbike is just a wonderful beautiful
Some great ideas. My only question is how long do your welds last? I just don't see much penetration when piling spot welds on top of each other like that.
Congratulations my friend, this project is even better and congratulations on the achievement, you deserve it. Your videos are amazing! a nice car Oh, that's a good idea. I want to make one!❤❤❤
Another fine job carried out with minimal tools. One small criticism if I may. The top mounting point of your rear shocks needs moving down to counteract the movement of the frame towards the rear wheel when you sit on it. The clearance would then increase enough to hold the frame better whilst still giving the desired look. Otherwise a great job. Have a good'un and enjoy your creations! 🏍️🏍️🏍️
Next time, try filling the tubes with sand before bending. Might keep it from wrinkling. Those wrinkles in a frame are bad news in terms of longevity and safety.
Don't worry about the negative sayers you've done well keep refining your skills and getting better it's one thing to talk its another to do congratulations
Achei bem legal o fato de ser artesanal, porém faltaram alguns detalhes como: regulagem de corrente, enbuchamento na suspensão traseira que pelo jeito que foi feito tera um desgaste bem prematuro, e uma melhor calibragem do amortecimento traseiro.
Ciekawa maszyna ... Rama gruba raczej przeżyje większość hinoli . Założyć blotnik i tylne nadkole zeby syf nie leciał na spód siedzenia , napinacz na lancuch zeby tak nie dzwonił i mozna śmiało iść po homologację
well done for your build, nice bike but the rear swingarm mount to the frame is weak and will wear out soon, the exhaust is dangerously low, the stand needs a spring and the chain when moving sounds louder than the engine...it's also as a rule, the levers of the rear brake should be on the left side of the steering wheel. with a little work, you can still perfect it because you have the know-how. be healthy...👍
Its a good build and it works, although I can see from the way its difficult to corner that your rake geometry is a bit off. I have done something similar in the past when modifying the rear suspension height on a bike. The steering was all weird and dangerous. The rake was wrong, so had to modify the front suspension height the same.
I hadn't used those main tubes wrong bent, you should have sand in the tubes. Those have got a breaking line and flattened tubes. no bearings in swng arms, and o on, no, no. I had done it as a hardtail. 50-110 cc semiauto? In the total: Don't use it, as a test of skills yes, but don't ride it. A message to all watching this: This is not the way to do it, not at all, mistakes and bad constructions are píled on each other. .
Anyone that has negative to say are just jealous they can't build anything good job if was close to me I'd hire you to make a new frame for my Honda cb 750 love the look great job
Très bonne architectures bravos sauf que d'après ce que je vois la tenus de route c est pas classe et je crois que la chaine touche quelque part mais dans l ensemble sa me plait bravos
You're an ok fabricator but please learn motorcycle building. I would in no way ever want to ride that bike. Unbalanced, way too long and extremely under powered. You hit 3rd gear before you left the short driveway. Top speed of what 35-40 kph.
where you going with the chain like that?exaust will rub on a corner, as well as the kick stand.its good but your building stuff for views.always the same motor, same wheels, forks etc.
на первых трех минутах становится понятно ,что чувак безголовый. Варит электродом, а не полуавтоматом. Так при этом руки голые ,ни перчаток ,ни рукавов - как минимум ожоги сварочным светом ,как максимум рак кожи. Не делайте так!
Atleast he shows his effort to make his own motorcycle.. if he did make a mistake.. he can fix his own problem.. have you shown your effort to make your own motorcycle?
thấy cách anh trai chế tạo ra cái sườn xe là biết anh trai không có một chút xíu gì về chế tạo mà bài đặc lên youtube làm cho người ta xem.thôi đi ông ơi làm là để ông đi luôn đừng đưa người ta đi rồi báo người ta tội lỗi lắm đó dẹp dùm đi đồ âm binh !!.
Potremmo elencare i tanti errori che hai commesso durante la lavorazione, ma ci delimitiamo a dire che: oltre ad essere orrenda, traballa, fa rumore, la catena tocca in un modo assurdo e tutti l'hanno notato, il sedile si evince lontano chilometri che è scomodo perché in discesa, le sospensioni sono troppo morbide, e sprovvista di frecce e specchietti, senza porta targa, etc..., inoltre, non hai saputo realizzare nessun pezzo in modo da poterle dare un look accattivante e bello da vedere, se avresti messo già qualche grafica forse sarebbe stata leggermente più carina.
not sure vintage style, all rear frame system have big fail, not nice not vintage style, ugly and worst all idea. need made totally different frame if want beauty bike. rear all need change new better beauty old style. mean normal bike style not thats,
![[#2024MAMA] BIGBANG (빅뱅) - 뱅뱅뱅 (BANG BANG BANG) + FANTASTIC BABY | Mnet 241123 방송](http://i.ytimg.com/vi/EQsYfiPR9uM/mqdefault.jpg)
You are one of the last You-Tube true amateur builders. Great. I love it. You totally did it your own way, no convention on how to build motorcycles was left intact. I hope you stay safe because you look like a nice guy.
Your such one of a kind in you are doing well for what you have done, well creating things like this is not as simple for what you people comment to this guy, he is trying too hard to build this things, you know your motorbike is just a wonderful beautiful
Some great ideas. My only question is how long do your welds last? I just don't see much penetration when piling spot welds on top of each other like that.
Thanks for the sharing my friend...you are the best,so'good job.
Good joooob kreatif
The King of Parts
BISOUS BONJOUR DE LA FRANCE BIENVENUE JADORE CONTINUER MERCI
Great show of your skills and use of what you can get. Well done.
Congratulations my friend, this project is even better and congratulations on the achievement, you deserve it. Your videos are amazing!
a nice car Oh, that's a good idea. I want to make one!❤❤❤
Tem que colocar um esticador de corrente com rodanas pq fica um barulho enorme , mas bel9 trabalho
Get better rear suspension.. they're bottoming out. And do something about the chain hitn the swingarm.
Another fine job carried out with minimal tools.
One small criticism if I may. The top mounting point of your rear shocks needs moving down to counteract the movement of the frame towards the rear wheel when you sit on it. The clearance would then increase enough to hold the frame better whilst still giving the desired look.
Otherwise a great job. Have a good'un and enjoy your creations! 🏍️🏍️🏍️
Why did you not use round tube for the upper frame ?
Nice job though......
Mean bike well done
Hello friend i can see that you are doing well with your building Moto bike 😅😊
Mad Max
saludes desde Colombia es un duro.
Muito bom esse vídeo
Next time, try filling the tubes with sand before bending. Might keep it from wrinkling. Those wrinkles in a frame are bad news in terms of longevity and safety.
Good job
красивенький шоустоппер
looks cool
Don't worry about the negative sayers you've done well keep refining your skills and getting better it's one thing to talk its another to do congratulations
Show !!!!!!!!!!!
Faz o banco com encosto com Santo Antônio alto daí fica igual easy Rider. Igual do filme assista Easy Rider. É bem antigo. Abraço brother.
Muy bien.
¿ Cómo harás para estirar la cadena, o cada vez la irás acortando quitando eslabones?
very good video
Achei bem legal o fato de ser artesanal, porém faltaram alguns detalhes como: regulagem de corrente, enbuchamento na suspensão traseira que pelo jeito que foi feito tera um desgaste bem prematuro, e uma melhor calibragem do amortecimento traseiro.
Ciekawa maszyna ... Rama gruba raczej przeżyje większość hinoli . Założyć blotnik i tylne nadkole zeby syf nie leciał na spód siedzenia , napinacz na lancuch zeby tak nie dzwonił i mozna śmiało iść po homologację
well done for your build, nice bike but the rear swingarm mount to the frame is weak and will wear out soon, the exhaust is dangerously low, the stand needs a spring and the chain when moving sounds louder than the engine...it's also as a rule, the levers of the rear brake should be on the left side of the steering wheel. with a little work, you can still perfect it because you have the know-how. be healthy...👍
Просто ох...лиц мопед☝️
Its a good build and it works, although I can see from the way its difficult to corner that your rake geometry is a bit off. I have done something similar in the past when modifying the rear suspension height on a bike. The steering was all weird and dangerous. The rake was wrong, so had to modify the front suspension height the same.
I'm not sure if I hug him or call the police.🤣
You should have made it a hardtail!
I hadn't used those main tubes wrong bent, you should have sand in the tubes. Those have got a breaking line and flattened tubes. no bearings in swng arms, and o on, no, no. I had done it as a hardtail. 50-110 cc semiauto? In the total: Don't use it, as a test of skills yes, but don't ride it. A message to all watching this: This is not the way to do it, not at all, mistakes and bad constructions are píled on each other.
.
You should of played high way to hell in the background 😂
¿El motor es sin embrague ( clutch) ?
Anyone that has negative to say are just jealous they can't build anything good job if was close to me I'd hire you to make a new frame for my Honda cb 750 love the look great job
desde pequeno tenho sonho de ter um mini carros porem nem tudo são flores
quick question, what Electrodes were you using to weld the frame? was it 6010?
Arka amortüsör biraz ,
Alçak oldu galiba 🤔
The muffler should be higher.
Très bonne architectures bravos sauf que d'après ce que je vois la tenus de route c est pas classe et je crois que la chaine touche quelque part mais dans l ensemble sa me plait bravos
Install a chain tensioner, you can hear it all time making noise….
Este motorcicle debería cer más largo de la parte trasera para poder cargar algo
Welldnone needs chain tensioner back suspension and turn signals
he needs to stop cooking
Boa tarde vc pra fazer uma solda não tem que ficar levanto a viseira a viseira e pra ficar abixada
Крепление задней оси слабое,также требуется натяжитель цепи,и задняя подвеска хромает.
but overall is good
Слишком мягкие пружины поставил.
Wheelbarrow motorcycle great skills zero science
Ko đều
Что за прекрасная страна, с такой хорошей дорогой,
и возможностью гонять без шлема???
..... слишком бренчит мот, на цепь натяжитель надо бы.
Chain is quite noisy, need to improve on that
You're an ok fabricator but please learn motorcycle building. I would in no way ever want to ride that bike. Unbalanced, way too long and extremely under powered. You hit 3rd gear before you left the short driveway. Top speed of what 35-40 kph.
What kind of motor is that ?
hahaa .. this is not a vintage style .. it is self styled modification
shock are too soft,
tube pipe are too low
Движок то от чего ?
video ini menimbulkan penyakit mata
Бибикалку забыл поставить , голосом будет орать что ли ?
Ground clearance is too low
where you going with the chain like that?exaust will rub on a corner, as well as the kick stand.its good but your building stuff for views.always the same motor, same wheels, forks etc.
и с переднего и из заднего колеса все лететь будет....пото му что нету крыльев......!!!!!!
на первых трех минутах становится понятно ,что чувак безголовый. Варит электродом, а не полуавтоматом. Так при этом руки голые ,ни перчаток ,ни рукавов - как минимум ожоги сварочным светом ,как максимум рак кожи. Не делайте так!
kullanılan profiller sağlıksız olmuş arka süspansiyon kötü
Egzoz yere çok yakın her an deline bilir sonra ön dönme işıklar yok teker çamurluk yok da ne kaldı ki ama yine de beğenmek lazım adam çaba sarf etmiş
I wouldn’t ride it. Not built to last long.
Atleast he shows his effort to make his own motorcycle.. if he did make a mistake.. he can fix his own problem.. have you shown your effort to make your own motorcycle?
Only thing is missing is a chain tenioner. Good build mister.
It's ugly AF.
thấy cách anh trai chế tạo ra cái sườn xe là biết anh trai không có một chút xíu gì về chế tạo mà bài đặc lên youtube làm cho người ta xem.thôi đi ông ơi làm là để ông đi luôn đừng đưa người ta đi rồi báo người ta tội lỗi lắm đó dẹp dùm đi đồ âm binh !!.
Potremmo elencare i tanti errori che hai commesso durante la lavorazione, ma ci delimitiamo a dire che:
oltre ad essere orrenda, traballa, fa rumore, la catena tocca in un modo assurdo e tutti l'hanno notato, il sedile si evince lontano chilometri che è scomodo perché in discesa, le sospensioni sono troppo morbide, e sprovvista di frecce e specchietti, senza porta targa, etc..., inoltre, non hai saputo realizzare nessun pezzo in modo da poterle dare un look accattivante e bello da vedere, se avresti messo già qualche grafica forse sarebbe stata leggermente più carina.
looks like praying mantis bike..
Gotta stop using raft on the prints.
Гавно!!!!! Маятник должен быть на подшипниках!!! Подножка с пружиной! Натяжение цепи нет а должно быть!
not sure vintage style, all rear frame system have big fail, not nice not vintage style, ugly and worst all idea. need made totally different frame if want beauty bike. rear all need change new better beauty old style. mean normal bike style not thats,
how tf is this vintage
Движок слабоват
It's a joke, right?
What Country is this.