I'm 61 years old always been scared of welding but I want to learn how to now not just because of this video. But that is really bad ass love it you have talent.
It’s ok decent design i don’t like a few things but it works. At least this kid is doing something besides playing with his phone so that’s a plus right there 👍🏻👍🏻
If you do not make this safer, you are going to be injured in a crash instead of walking away. Imagine being doused and lit with petrol or impaled on your steering. Easy fixes that make a difference... and always wear a helmet. Cool build, thanks for the video!
Add some body panels and a windshield, do some exhaust work to keep it inside and not sticking out the side (unless it was dual on both sides) and it would be perfection! THIS IS AWESOME!
That's awesome buddy, but you might want to put the exhaust inside the frame so if you bump anything it won't matter because it's out of the way, great build 👍🏼
I'd definitely 3after 1 if it came in kit form so I'd have something to do with the kids to stop them going outside the front garden too much as a some of the kids pick on them all the time
You did a great job sir, I like it when you have a lot of driving scenes, please drive. This is all very interesting but this gives me an idea of how to build your work right now. Please continue to uphold
I like watching your builds, and it's awesome that you only use a stick welder.........but you really need to get a ratchet set instead of only using wrenches to put on the nuts and bolts. You should check out some of the projects that Rather B Welding does on his RUclips channel.
did you reuse the same ktm motoryicle parts in all projects ? After done these cars you made, did you sell them ? Great projects, but i concerned about the rear axle. that little pivots are not enough to secure in place properly. you have to add some solderted ring in there.
كان بإمكانك وضع كراسى الرولمان بلى للمحور الخلفى من أسفل وكذلك قواعد رباط مقصات التعليق الأمامى من أسفل لرفع جسم السياره أكثر من ذلك وسيعطيك هذا مساحه لتعليق ماسورة العادم من أسفل الشاسيه وليس من جانبه .. لكنك مشكور على الڤيديوا وأعمالك رائعه وبسيطه وواضحه جدا
Terima kasih telah menonton video saya dan memberikan komentar yang positif! Saya senang mendengar bahwa Anda menyukai proyek saya. Jika Anda memiliki saran untuk proyek atau perbaikan di masa depan, jangan ragu untuk memberitahu saya. Terima kasih atas dukungan Anda!
Amigo soy Tito desde Perú Chiclayo, te recomiendo no debes filmar demasiado la soldadura, afecta la visión y así como yo que evitamos ver tus videos por este error, son muchos los que evitan tus videos, corrige eso por favor para poder ver tu información, gracias
He could have took some of that flat steel he had and made leaf springs for the back axle too not that hard. But this kid is still new to making stuff I guess. It’s ok for a simple design but I was building carts like this when I was 10
Should have made it sit higher off the ground too that cart is way to low for off-road. If he changes the tires put racing slicks he can make a street cart. The height he made is good for that.
COOL... Que du frein avant c'est chaux je connais pas la puissance du moteur faut pas qu'il pleuve s'en garde boue sur les Roue et maître le moteur et le réservoir au milieu répartie mieux les Masse 👍
Obrigado pelo seu comentário e pelos seus bons desejos! Fico feliz em saber que você gostou do meu trabalho e agradeço o seu apoio. Se você tiver alguma sugestão ou ideia para futuros projetos, por favor, me avise. Obrigado novamente e que também haja muito sucesso em sua vida.
Então tá muito bacana mas mais você tem que colocar uma capota para não molhar quando está chovendo faz uma embolada aí coloca uma capota para não molhar beleza Chicó e Duartina interior de São Paulo Brasil
an hour and 15 minutes?... Pfft!! could'a had it done in 52 if he wouldn'ta stood around camerain it the whole time.... 😆 Nice Job! What did the front suspension come off of? I dig them drum breaks!
I'm 61 years old always been scared of welding but I want to learn how to now not just because of this video. But that is really bad ass love it you have talent.
Yes sir welding is fun learn on stick it’s never too late just get a used 230 can find em cheap can weld anything with one of those
Приятно видеть талантливого человека , поэтому наверное и решил тоже картинг дома заделать .
You've done a fabulous job there sir, this gives me ideas on how to build mine now.
i build karts as well. this level of craftsmanship and work from one man is incredible. bravo and keep making these awesome vids!
It’s ok decent design i don’t like a few things but it works. At least this kid is doing something besides playing with his phone so that’s a plus right there 👍🏻👍🏻
What would you change.
If you do not make this safer, you are going to be injured in a crash instead of walking away. Imagine being doused and lit with petrol or impaled on your steering. Easy fixes that make a difference... and always wear a helmet.
Cool build, thanks for the video!
Yoooh wow you helped me build my own go cart thanks bro❤😂
i like when you have good amount of footage driving them please do more driving on other builds keep it up
Builds doing what "feels right" rather than following a stringent plan are always the best.
Вот самое лучшее видео по постройке этого чуда ) все ясно и понятно в целом даже без слов)
That’s some creative engineering 👍🏾👍🏾😎
Thanks 👍
Add some body panels and a windshield, do some exhaust work to keep it inside and not sticking out the side (unless it was dual on both sides) and it would be perfection! THIS IS AWESOME!
That's awesome buddy, but you might want to put the exhaust inside the frame so if you bump anything it won't matter because it's out of the way, great build 👍🏼
I was going to mention the same thing.
Thought the same thing. If he doesn’t know how to just raise the engine….
Nice to see people do thing by iteself. Great achivement my friend. BRAVO, He as nuts :p
This man is creating his own car company. I would buy one of these if i could lol.
Sometimes, home made carts like this one are better than store bought ones.
Dont buy....made in crude manner... not safe..
I'd definitely 3after 1 if it came in kit form so I'd have something to do with the kids to stop them going outside the front garden too much as a some of the kids pick on them all the time
Cuáles són los planos
You did a great job sir, I like it when you have a lot of driving scenes, please drive. This is all very interesting but this gives me an idea of how to build your work right now. Please continue to uphold
I like watching your builds, and it's awesome that you only use a stick welder.........but you really need to get a ratchet set instead of only using wrenches to put on the nuts and bolts. You should check out some of the projects that Rather B Welding does on his RUclips channel.
Very cool! You should check out something called cycle karts . From what I've seen here, you would make some of the best. Good job man.
It’s pretty cool I’ll give him that. Motorcycle engine is good I built one with a YZ 490 when I was a kid
Good job ❤❤
I love the way you make stuffs
BRAVO ET BONNE CONTINUATION❣❣
very good friend congratulations for the work.
Awesome 💯😎
Great job ! 👍
Thank you! 👍
@@CHERALAUTO You're welcome !
maravilhoso; parabens, show de bola
Отличная идея👍
did you reuse the same ktm motoryicle parts in all projects ? After done these cars you made, did you sell them ? Great projects, but i concerned about the rear axle. that little pivots are not enough to secure in place properly. you have to add some solderted ring in there.
È uno dei veicoli più fantasmagorico del mondo il prossimo video lo voglio vederlo al McDrive
كان بإمكانك وضع كراسى الرولمان بلى للمحور الخلفى من أسفل وكذلك قواعد رباط مقصات التعليق الأمامى من أسفل لرفع جسم السياره أكثر من ذلك وسيعطيك هذا مساحه لتعليق ماسورة العادم من أسفل الشاسيه وليس من جانبه ..
لكنك مشكور على الڤيديوا وأعمالك رائعه وبسيطه وواضحه جدا
Um maravilhoso e abençoado final de Semana pra todos nós com a Santa Paz de Deus
Good progress project good luck
Thank you, George! We appreciate your support.
Los plano@@CHERALAUTO
Good job.. 👍👍👍👍
Good project 👍 👌
good work, I want to make such a device, but I can't find the front chassis, please tell me where I can order it? Greetings from Ukraine!
Mad Max!
How much money ofthiscar 😅
Nice😍😍😍😍
Yah man from Jamaica it bad mi love it... question do you have a cutting list or a plan for sale?
Super creative and so hard creative
good job 👍👍
What welding rod is he using with that small welder. It seems to do a clean strong weld.
It is good bro, i w to learn
Amigo nao sou Nenhum especialista na Area mas... acho que a parte de tras faltou Suspensao. Otimo video kart brabo
Mantap kawan 👍
Terima kasih telah menonton video saya dan memberikan komentar yang positif! Saya senang mendengar bahwa Anda menyukai proyek saya. Jika Anda memiliki saran untuk proyek atau perbaikan di masa depan, jangan ragu untuk memberitahu saya. Terima kasih atas dukungan Anda!
@@CHERALAUTO saya menyukai proses pembuatan nya bos 👍
Класс. . Сделай мини копию любого супер гипер. кара .
You always mount the engine on a plate so it can be adjusted for chain tension not hard bolted to frame
Congratulations! The vehicle was amazing!
Do you have the project in PDF? Can send me?
Thanks!
Ficou show....
Gostaria de construir um parecendo
Love you!
Keren luarbiasa
Bro which engine really suitable for gokart bike or car engine??
Amigo soy Tito desde Perú Chiclayo, te recomiendo no debes filmar demasiado la soldadura, afecta la visión y así como yo que evitamos ver tus videos por este error, son muchos los que evitan tus videos, corrige eso por favor para poder ver tu información, gracias
Tudo isso é muito bacana, mais falta um tutorial com as medidas e peças usadas, mais ficou top dos top
Bro plz make monster truck 👍🙏🏽🙏🏽❤️
Top top queria um desse😅
Nice build!! Top speed?!?
Nice work, but I wish u would have aligned the exhaust with the body, put it on a different location.
🥴
Qué bonito camino por el que conduce. ¿En qué país se encuentra?
We didn’t have rack and pinion steering back then either
16:47 😍🕌
Nice 👍👍👍👍 mantap
He could have took some of that flat steel he had and made leaf springs for the back axle too not that hard. But this kid is still new to making stuff I guess. It’s ok for a simple design but I was building carts like this when I was 10
if you havnt started to watch this video i advise changing speed setting to #2
Should have made it sit higher off the ground too that cart is way to low for off-road. If he changes the tires put racing slicks he can make a street cart. The height he made is good for that.
Мне так панравелась твая гонка зделай и мне такую я несмагу сам зделать кстати а шо за матор там у тебя на гонке? Ти харош вапше респект тибе🥳👍
Quick question where do you get all the parts for these projects?
Формула нервно курит в сторонке
I love all your builds until the point you use the brake levers for foot pedals!
Nice job sir
reverse gear ?
COOL...
Que du frein avant c'est chaux je connais pas la puissance du moteur faut pas qu'il pleuve s'en garde boue sur les Roue et maître le moteur et le réservoir au milieu répartie mieux les Masse 👍
ever heard of material savings and occupatioal safety ?
Perfect
"Bro, from which quad bike did you take the parts? What engine do you have, and where can I find the blueprints?
Thanks."
Really loved thiss
it amazing but i want the blue prints but can't find them
Bro you to add some suspensions on the back or you can put just one tyre on the back like a trike🥲
No reverse what is that?
Chế xe thì không khó
Chỗ tôi chế ra xe
THì cũng không đi ra đường dc
Csgt bắt tịch thu xe ngay !!
너무 멋지다.
한국에서도 제 영상을 시청해주시는 분들이 있어서 너무 기쁩니다!
أصنع drift trick❤️🇹🇳😊
Subscribed...
YOU DID AMAZING can you make me ONE AND SHIP it to me
Best design size and model
Bom dia Boa tarde Boa noite a todos nois com a Santa Paz de Deus
Blue is a RIPPER!!!
Thanks for your comment! Blue is definitely a favorite among our team and we're glad you like it too!
Essas balanças q tu usa é de que?
What was the name of the part you used to connect the wheel to the body?
What type of engine did you use there
جمیل استمر
Thank You
@@CHERALAUTO "Bro, from which quad bike did you take the parts? What engine do you have, and where can I find the blueprints?
Thanks."
Parabéns sucessos
Obrigado pelo seu comentário e pelos seus bons desejos! Fico feliz em saber que você gostou do meu trabalho e agradeço o seu apoio. Se você tiver alguma sugestão ou ideia para futuros projetos, por favor, me avise. Obrigado novamente e que também haja muito sucesso em sua vida.
Круто, это что сверлиш самарезами по металу
Fiquem com Deus fiquem todos com a Santa Paz de Deus
👌👌👍👍
Então tá muito bacana mas mais você tem que colocar uma capota para não molhar quando está chovendo faz uma embolada aí coloca uma capota para não molhar beleza Chicó e Duartina interior de São Paulo Brasil
the tires are done!!!
an hour and 15 minutes?... Pfft!! could'a had it done in 52 if he wouldn'ta stood around camerain it the whole time.... 😆
Nice Job! What did the front suspension come off of? I dig them drum breaks!
Pretty sure you mean filming.. never heard of camerain before
in how many days will you finish
How about going back? You have to get off and push back
A la tu trabajo está de 100! Esos proyectos los vendes? Quisiera adquirir uno