Fitting VW Beetle Aftermarket Fan Shroud and Tin and MST Serpentine Belt Kit Install.
HTML-код
- Опубликовано: 28 июл 2020
- Today we will be addressing aftermarket tin for the aircooled Volkswagen engines and what to look for when trying to get them to fit. Once they are fitting better, we will be installing the alternator and MST serpentine belt system.
Thank you for watching!
Check out Haptic Garage's video here - • Put the COOL back in C...
Please like, comment, share and follow along!
I enjoy reading your comments and respond to them all individually!
The online VW commuity is awesome, thanks to people like you! 👍
Check out my playlists for engine builds, Volkswagen shows and get togethers along with tips and tricks to help keep your Classic VW in the road.
If you wish to help the channel along, you can make donation, tip me or buy me a quart of oil through PayPal. A percentage of all donations will be donated to a local animal shelter.
73jawbreaker@gmail.com
📷You can also find me on Instagram - / vwjawbreaker
💻Email at - 73Jawbreaker@gmail.com
🔷Other great channels to follow in no particular order:
Levi’s Backyard / @levisbackyard
Rob Stapleton - FabWorx / goxtreme1
Slades VW Beetle / @sladesvwbeetle
Vintage Speed VW / @vintagespeedvw7864
Misunderstoodboygenius / nightsky2431
Haptic Garage / @hapticgarage
VeeDub p8 / @veedubp8
5150MXVW / swadmx
Mustie1 / mustie1
Marcijunebug / marcijunebug
Jw Classic VW / @jwclassicvw
VolkswagenPlanet / @volkswagenplanet
Busman 54 / @busman5429
Big W Adventures / @bigwadventures7061
E-Man Deluxe / @emandeluxevlogs
Milage Unknown / @mileageunknown8910
VW Darrin / vwdarrin
EzGz / theezgz
CT / @ctmoog
Good old Mike / michaelwittmer
Vané Pinstriping / vanepinstriping
DuckmanCycles and VW garage / duckmancycles
VW Nut 1967 / @vwnut1967 
Авто/Мото
Nice job, If I have a stock fan shroud with heater flaps I have always wired them open here in FL when I lived out west in Oregon I made damn sure they operated properly. Many people will tell you they are always needed but..... Ive been doing it 30+ years and my engines last and don't have overheating issues. call me we can talk about the pro's and cons for hours! 🤣
Volkswagen Fetish I agree, they have their place especially in colder climates. Here in FL, not so much imo.
You and I can talk for hours about anything, one of the reasons I love you man.
Up here in the frozen tundra, I use a T handle choke cable for the flaps, and open them as soon as the oil temp comes up.
First video finding out it’s a 60 not a 58. And the camera died unexpectedly. Great video
I was going off what I was told vs running the vin.
Great minds think alike! Thanks for the shoutout, it's always great to welcome new people. I like the aluminum you used to avoid messing up the chrome plating. And that torque spec... I've had some lug bolts that met that standard. Thanks again for the mentions- looking forward to the carb setup!
Couldn’t believe I was in the process of debating recording it when you posted your video lol
Hopefully you’ll get more subs and views though this.
I love the attention to detail. That is hard to do sometimes when you just want to get her back on the road. Nice work.
I agree! It’s easy to put stuff together and be done but I’m noticing more and more how things don’t fit together properly. All of these little things add up to better cooking for the engine.
Enjoyed that, not really into the shiny, and was always told ‘Chrome won’t get you Home’ 😂 but it looks OK 👍 hopefully you’ll do a carbs and linkage video 😊
I’m glad you enjoyed the video.
Doesn’t matter if it’s painted or chrome, if the shroud and the rest of the tins aren’t correct, you’ll run hotter.
There is a video on the dual ITC carbs for this engine.
Good ol aftermarket parts. Got to love them. Great video as always. I'm glad to see you have the drive to keep making videos. Keep up the great work. Take care and stay safe.
Gotta love aftermarket stuff lol
So far I’m still plugging along. Time will tell what happens. Stay safe buddy.
Can you make a video on how you install the Dual Carbs linkange and all !
Krasimir Georgiev covering that next week! Stay tuned 👍
VWJAWBREAKER Thank you so Much !
Great info! I must admit I never paid that much attention to the shroud fitment details! I will moving forward for sure! Great vid as always!
It’s amazing how different the stock vs aftermarket stuff fits.... something always need to be tweaked somehow. Stay safe and healthy my friend.
Looks wicked can't wait to hear it roar with that exhaust it should sound awesome jawbreaker looks fantastic
Hopefully it’ll crack off soon!
👍👍 it looks super sharp
Thanks man!
Clean build brother!!
I think I may have had a set of flaps at one point in time... They were tied open with zip ties.... I got all new after 36hp style fan and shrouds... That was such a pain!!
I did mine all black, it showed every slip, scratch graze & tool drop...
Touch up paint fixed that!!
Now all that hard work is covered in road grime & oil!!
Keep up the great work brother!!
For those of us who drive our cars vs trailer them to shows, they do get dirty quickly!
I appreciate you always being here buddy. Stay safe and healthy 👍
Thanks for the suggestion....
I bought the dual 34 ICT'S, and I'm looking forward to using them, hopefully soon...
Greg Logan stay tuned to next weeks video then! 😁
I saw the same video. He did a great job.
He’s amazing man, even in person. Super cool guy.
That bead roll on the fan shroud and the head tin not lining up would drive me crazy... I'd have to rebuild it. lol (I'm OCD like that 😁) Great job on making it work!
Oh it’s driving me nuts but I don’t have your fab skills either lol
Gary, cracking job that. I love the shiny stuff, Noah says hi 👋
Dean Robinson you can keep that shiny stuff, too much polishing for me 😂
Hi Noah! ✌️
Hey man Kevin here from Australia. Engine is looking amazingly shiny.
Anyhoo stay safe and stay well.
✌ Peace
It’s too shiny for me 😂
Good to hear from you, hope you’re safe and well bud!
nice info on the aftermarket tins, i'm about to get one myself
Make sure you check out Haptic garage’s video as well, he covers a lot more than I did.
@@VWJawbreaker i saw the Haptic video yesterday. He covered the topic of engine tins perfectly. ✌
Another great video...I do think its time you released some swag though. I'd be down for a t shirt and sticker.
Thank you. I’ve been thinking the same lately regarding T-shirts, I have stickers just need to get more printed.
Thanks for the feedback and helping pushing me the right direction.
Old German mechanic told me those thermostats are only to heat engine and in winter and don't even work till temp is at 25⁰ outside. What happens is all the linkage gets dirty and gets stuck closed and engine overheats because flaps are stuck closed. Said take them out and never use and I live in New England. Never had a problem.
There’s definitely a lot of controversy on this topic. I’ve never had an issue either 🤷♂️
That chrome shroud will sure look good splattered with oil and caked with dust a year from now... lol just kidding a bit with ya... Would like to see it a year or so from now. :) Looks nice though !!
KSFWG that’s why none of my engines have chrome.... or any chrome on the bug for that matter. Aaron said the black ones are on massive backorder so he got the chrome one for now. Once it fires up for the break in and I do a once over, change the oil and adjust the valves it’s his to keep clean.
Drill holes in your chrome lol. JB weld use your head not time your pie hole.
Confused on what you’re even taking about…
Nice shirt!
Terry Prevatt 😁
Gotta support my buddy’s!
Looks great Gary. I agree about the chrome. Been there. Drove me crazy. What carb kit are you going with? I'll be going to duals when the trike comes off the road when the snow flies. Your vid are always full of info, craziness and fun. Stay cool on those 4000 degree days. Enjoy, Jim
Thanks Jim! I’m still trying to find that balance of info and my personality and sarcasm.... I’ve honestly kept the sarcasm dialed back quite a bit lol
This engine will have the dual 34 ICT’s on it. Next video we’ll go over setting them up, linkage, etc.
Can there ever be enough sarcasm? Looking forward to the carb setup video. Have a great weekend!
Jim Lester that’s a great point but most people can’t handle my extreme sarcasm lol
Take care buddy and engine your day.
Hi, Gary, again very nice and informative video ! At the moment, I am also battling with one of these aftermarket shrouds, same as your, just not chrome but plain black. Have the same issues as you with fitment, also had to trim it to get it to sit kind of properly... Have one question there though : you can trim the bottom of the shroud where it contacts the case, to get it to sit lower, but isn't how high or low the shroud sits, in the end determine by the alternator/fan assembly ? I worry that if I trim the shroud enough to get it to sit properly on the case and cylnider shrouds, the opening for the fan and the boltholes won't line up anymore.
@@michaeltetzner5847 glad you enjoyed the video.
You are correct, the fan will determine where the shroud sits. It’s best to mock things up as a complete assembly and go from there. You may need to trim the lower part that sits against the case of the alternator doesn’t sit flush with the stand. It’s trial and error.
Aftermarket parts can be a pain. I found that out with a rear apron. 🙄 You did a great job working with it brother!!
Most definitely! Thanks, I appreciate you brother!
Awesome motor,little to shiny for me. Definitely nice though
It should be a great runner. Too shiny for me too, but it’s what this guy wants.
I'm probably going to be painting the fan shroud with the tins I waited over a month for a black one that never shipped. So I just got the chrome one so I could get the motor done.
Where did you get the fan shroud mine didn't come with an accelerator cable hole
I don’t know where he bought this one from, sorry.
those aftermarket ones can sometime take some extra time to make fit
Have a few hours into those tins and it’s not perfect.
Yeah. I have a nightmare one I've been dealing with. I got so fed up that I pulled out one from a 72 and I'm going to clean it up and paint it and ditch the aftermarket one.
@@toddmichaeljaniszewski that's usually a good call. Finding a nice clean straight original one is usually the way I go
Toddmichael Janiszewski don’t blame you one bit!
@@VWLifeVW I've bought some complete old barely functional engines to have extra parts like this. I had never done the aftermarket 36HP style shrouds and since I wasn't running heat, I though I'd try one since they can have a clean look. But man, it was a nightmare from the moment I start fitting that. It all looked great during initial mock-up and such, but when it came to the real details of install it was just the one in the video, but I have far less skills (and patience) to deal with it.. i1.wp.com/zuczek1302.com/wp-content/uploads/2019_AS41_Build/Day16/AS41_Build_Day_16_8.jpg?resize=780%2C439&ssl=1
Hey Gary ! All or almost all the of the aftermarket stuff like the alt. pulley and the fan hub fall on ? I had a 63 bug when I was 15 and to get the gen pulley off I ended to have to barrow a puller to get that thing off. Now you ? about it at the parts house and their reply is = the key way hold it on . That is why they end up rattling the key way . What is a VW driver to do . I did find a German black pulley that I will need to beat it on the alt. shaft . but it was # 3 the chrome one and gold one I gave away---- trash
Yeah unfortunately most of the aftermarket stuff now days isn’t anywhere near as good as the original.... they produce quantity over quality. There are some good brands out there but they are far and few between.
I need to pull the tins off my turbo motor now 😅😅
Lol, doesn’t hurt to double check this aftermarket stuff!
👍
Vintage 76 vipergreen # Romeo hope things are well with you.
Is there a taller fan shroud to pull more cool air for the engines
They offer the stock fan shroud and then the 36hp shroud like this one.
Bernie Bergman fan shroud
Scat fan shrouds, are better than Empi ones. I don't think they're on backorder either. Summit's sells them also.
Vintage 76 vipergreen # Romeo good to know for the future. Thanks man 👍
So when you wrenched it over that whiped off the assembly lube inside didn't it?
Do you mean when I turn the engine over by hand it wipes the assembly lube off?
No, it does not.
@@VWJawbreaker My spelling is skewed when sleepy LOL
@@REVNUMANEWBERN mine is always screwed lol
Was that a welded fan?
Nope, just a new one. He’ll be fine with this being a just over stock engine.
Does the serpentine belt work as good as it looks ? Or stick with the V belt ? Nice work
It does work well, wears out less but imo it depends on the engine setup. Higher hp engines need a welded fan and a stock v belt setup.
@@VWJawbreaker iam building a 1776 mild Engle 100 cam for a beach buggy . Hope you guys are drying out down there
@@shawn9878 that’ll be a good easy runner.
We faired very well compared to others!
36hp tins with doghouse will never obtain genuine because they were never made and Only option is aftermarket but some removal of metal for a snugg fit is required but rather have reasonable oil temps than the alternative..good post Jawbreaker ..
Neale Frazer very well said and thank you!
@@VWJawbreaker No wuckers ya Floridian..
😂
Hoover bit?
Misunderstoodboygenius he ordered it, just hasn’t come in yet. Going to break it in and then put it on when he removes the tins for paint.
VWJAWBREAKER good! Didn’t want you to forget that :)
I appreciate you looking out for me!
Don't appologise for using rivets we use them plenty on aircraft.
That’s a great point! Although I’m sure the ones I used aren’t used on aircraft 😂
It’s pronounced ah-room-in-um…. Duh! 🤣
Was there any galvanic reaction over time between the aluminum piece and the fan cowling?
Haha!
Nope, no corrosion that I’ve seen.
galvanic corrosion
Where at?
@@VWJawbreaker dissimilar metals in the shroud, ive always had problem when i use aluminum with steel. i like your videos im not that far from you in tampa.
@@groundup421 I’m familiar with what you’re talking about, have to really worry about that in marine world.
I highly doubt there will be an issue in the fan shroud, but it’s a good point.
Maybe we’ll run into each other at a show or something.
Lol 872,000 ft lbs
Realistic torque specs lol