The ULTIMATE DIY Styrofoam Shredder!!
HTML-код
- Опубликовано: 24 июл 2024
- ENROLL IN THE ONLINE CLASS HERE:
abundancebuild.com/collection...
DONATE TO OUR RESEARCH HERE: www.paypal.com/donate/?hosted...
Welcome to the self-sufficiency revolution! Our channel is your go-to source for sustainable, eco-friendly building techniques using styro aircrete, a lightweight and versatile material made from a mixture of cement, water, and styrofoam. Our channel focuses on alternative building methods and natural building materials, including aircrete blocks and styrocrete. Our expert hosts share valuable tips and tricks for building with aircrete, whether you're looking to construct an aircrete home or incorporate aircrete walls into your renovation project. We also explore off-grid living and minimalist homes, highlighting the benefits of modular and prefabricated homes for energy-efficient and passive solar homes. Our content is perfect for DIY enthusiasts and those interested in alternative building materials, especially green building materials. Follow us for inspiration and advice on building your dream home with sustainable living in mind.
#Aircrete
#BuildingHomes
#EcoFriendlyHomes
#SustainableBuilding
#GreenBuilding
#HomeConstruction
#DIYBuilding
#HomeDesign
#OffGridLiving
#MinimalistHomes
#Homedecor
#HomeRenovation
#HousingSolutions
#AlternativeBuildingMaterials
The information provided in this video is for general informational purposes only. It is not intended to be a substitute for professional advice or instruction. Viewers should always exercise caution and take appropriate safety measures when attempting to build or construct something. The creator of this video is not responsible for any injury or damage that may occur as a result of following the instructions or information presented in this video - Хобби
I got the same result sewing an old bed sheet and it was free. Also I've found that if you make a watered down fabric softener mix in a spray bottle it keeps the foam beads from flying everywhere by reducing the static charge so your spray idea should work.
Thanks for the idea Herger. I will try that.
Oh, funny! I just added my comment about that above before finding your comment😂. Maybe I’m not alone in this issue.
Love your videos. Version 2 of the shredder is OK. I was a manufacturing engineer that specializes in this kind of factory enhancements. The insulation bag is perfect. The use of an electric lawn mower is great. Here are the changes I would make. 1) Redesign the cowling/container. I would use something like the plastic 55 Gal drum but go clam shell design. (2 piece) fitted for the engine/chopper and seals well. Instead of top opening I would make the container longer and use a top-side feed port. Make it easy to change parts. 2) mount the container high(ceiling/wall), to do this right the top of the container would need to be about 15 feet up off the ground. This is to create a continuous column feed. 3) add a diagonal feed conveyor. 4) then hang the insulation bag from the bottom of the container. You want the exit port of the insulation bag to fit the height of the cement mixer.
Ingenious upgrades Dennis!
In your suggestion #2: Question, is the reason for this structure change to use gravity to naturally drop the styrofoam into the white insulation bag column?
In your suggestion #4: Question, is this solution to completely knock out the moving of the styrofoam from the white insulation bag into the grey garbage container, and then having to pour the styrofoam from the grey garbage container into the cement mixer? If so, great idea, But then how would he measure the amount of styrofoam that is being fed into the cement mixer?
@@maigematthews5620 You could use two sliding gates , open the first one to fill the 45 gallon bucket , close the first then open the second to dump your 45 gallons of EPS directly into the ribbon mixer , you need to hoist them all up quite high but it would reduce spillage and increase the speed between batches.
I would use a grout pump to pump directly from the mixer into your formwork too.
thanks for sharing! subscribe for new builds coming soon!
I'm very inspired and excited about your research and results. Please continue with this work.
Thanks! Will do!
Bless you! Seriously I think I have my husband talked into this project, not having the mess is one in the plus category.
Thank you! subscribe for new builds coming soon!
This is what RUclips and the internet is all about. Thank you for showing us your DIY tinkering. You're making me want to do this, although I don't have a use for it until I buy land. Great designs and use cases. Awesome.
Thank you! Subscribe for huge updates coming soon!
THANK YOU FOR ALL YOUR HARD WORK AND ENGINUITY IN BRINGING THIS WHOLE CONCEPT TO BIRTH....
You're welcome! Susbcribe for new builds coming soon!
Fantastic system now! I found that when I added the leaf blower to the shredder discharge, it created a vacuum and thus it was not only less messy, it also filled my large pillow case to the brim.
Would love to see a picture.
Great job! Subscribe for new builds coming soon!
Thanks for the amaizing idea and demostration.
You're welcome!
I went back and watched the video again and noticed the wiring instructions. Thanks.
You're welcome!
These videos are just awesome. Stephen: you definitely epitomise DIY, and I am most impressed by your endless ingenuity.
My only contribution is this: regarding castors, my rule now is that everything in a work area that can go on castors, does go on castors.
If there are too many, or too heavy items sitting on the floor, then the workspace is inflexible, and you end up discouraging yourself from moving items around.
In my case, that includes several work tables, a drill press, 4x pallet rack units, press, etc.
Thanks for the tip! Subscribe for new builds coming soon!
If you add a second blade to the mower and mount it rotated about 60 degrees from the original blade you'll get finer beads.
I also recommend adding fiberglass strands mixed into the styro aircrete.
Thanks for the tip!
Amazing video ty for sharing!!
Youre welcome! New builds coming soon!
Nice refinement! This really is awesome work. Now all you have to do is turn that mower sideways, rework the chute to enter from the side & you can mount it on a vertical sliding mechanism to raise & lower it for bag height/easy loading of new bags. Inside the chute, just add a brush you can push pieces through to ensure it does not escape for good measure. Looking forward to your next video
Thanks for the tips! subscribe for new builds coming soon!
Thank you So much. You are an awesome inspiration. I’ve been following air Crete for a long while now and seeing this development with the Styrofoam is huge. I just bought a small patch of land and looking to build some houses on it and this is gonna be my main construction method.
Joshua glad this is giving you a great direction for your house builds.
I'm in the same boat Joshua!! - Bought the land last year and now just bought $1500 of tools and $2000 of materials to begin my journey. I've promised my wife to build her a house and I'm also in need of an office outside the house. This morning I was watching Aircrete Harry (Wonderful resource!!!) who mentioned Sephen's "Stypro Air Crete" as a good method to avoid unstable aircrete. Now I feel like maybe I should build one of these contraptions!!!
@@rodneygiles3792 I’m right there with you guys… I have purchased all of my land properties first, and now I’m looking into affordable building solutions. What with today’s prices on houses and even building materials skyrocketed, we are only left to find alternative solutions.
Here are some interesting ones that I found:
Enclosed carport transitioned to a storage shed
Large storage shed transitioned to a small homestead house
Large carport transitioned to a Barndominium
Storage sheds made from wooden pallets then styrofoam spray insulated
Your doing great.
Keep up the informative videos.
Thank you! Subscribe for new builds coming soon!
Love your videos, your adventure for building is exciting..!
Thank you! We are all in this together!
Farmers get seed to be planted in what they call “Super Sack”. They do not reuse them. They have 4 hanger loops it’s about a 5’ x 4’ cube bottom funnels down to a 6” tube. 1 1/2 cubic yard.
Thanks for the tip! Subscribe for new builds coming soon!
Thank you for your detailed videos.😎🤩
You're welcome! Subscribe for new builds coming soon!
I was inspired by your first shredder and made one of my own. I needed 1/4 screen for making blocks (aka -perfect block clone) To help with the chopping, I only have 1/2 the plywood deck open with the half over the exit covered to create a "grinding chamber". i used a 55 gallon fiber drum that fits exactly the 20" mower. My plywood shoot has a 45 degree entry port with the opening perpendicular and having heavy vinyl strips to prevent the blowback. I use the harbor freight dust collector as the added suction enhances the extraction thru the screen. My next upgrade will be adding brushes to the end of the blade to force particles thru the screen as on of your viewers suggested. I too added a switch. Be warned with the single pole switch, the braking after turning off is disabled. I am researching momentary switches to re-enable that function. I have made 2 blocks so far, but am still refining the formulation a both came out a little bit high on the density. Also, I use inexpensive recycle bags on the dust collector and collect the proper amount for one batch (45-55 gals). The recycle bags are fine since the particles of foam don't puncture.
Can you share a link to more details or video about the perfect block clone? I would love to see something on that.
Great job!
Awesome work!! Thank you for sharing 🙏😅
You're welcome! New builds incoming!
You just keep on making it better...Don't Stop
Just getting started! Subscribe for new builds coming soon!
i will love to watch a video, step by step, in how u build the shredder from the beginning to end. for all of us who do not have a clue in how it is done...thank you for sharing information with all of us.
I am making an e-course now that will cover everything! Also working on a plug and play shredder to sell - stay tuned!
@@AbundanceBuild that is good but that means u probably will charge more than 5 dollars for the course right? So only those with extra money will be accessing the curse...in other words i will be left out in the cold wishing to learn how is done. thanks
Nice work will be do the mod to mine and the insulation bags are great idea. I built my grid out of 1/4 in. round bar vertical to the deck spaced 3/4 of in.
Great job!
I love the concept and I could see myself one day collecting scraps from work to replicate this someday. But have you ever rented an insulaton shredder with the hose attachment? Maybe taking one of those machines and attaching an extended feeding tube like you made out of wood. But put heavy rubber ribbons inside, almost like mop hairs all hanging down so you can feed it but when it burps the foam should not spit back. Another thought for combining the styrofoam with the concrete is keep it in the bag but fashion a mattress inflator to a bigger tube with a way to secure it to the bag. That way you can shoot the foam out of the bag into the concrete hopper. Also maybe put a protective hood onto the concrete hopper to help minimize losing foam to the wind. And I see in the comments someone mentioned the concrete spray hose. And I think that would be neat to see for sure. I mean 3d printing housing is on the rise. Great idea though for real man. I hope you have many successfully structures!
Thank you! Subscribe for new builds coming soon!
You're going to need a lot of EPS beads if you want to build houses.
Convert chipper shredders like the Troy Bilt Super Tomahawk, add a blower.
Keep up the good work!!
Thanks for the tip!
Yes! 👍🏼 So much more clean!
Yes! Subscribe for new builds coming soon!
terrific content :) keep it coming
Thank you! New builds coming - stay tuned!
Very great job. It reminds me of taking my dad's old tools and repurposing them for different builds.
I'm new at all this and want to start soon. I wanted to recommend on your presentation. This may be easier said than done, but when you were running the video of your "before" as full screen and your talking about it comparing to the New. I think if you could put the video in the upper right quad since most your angles in your recordings I've seen that area isn't framing what you are working on.
I'm gong to go back and watch some of your older projects. But I really want to use the aircrete and stucko for under my deck to make it a Work Space all year round and have it look better than the wood.
Thank you
Cliff
Thanks for the tip!
I watched the first vid a while back and I liked the idea but was taken aback a bit by the mess. This in turn... you can really call "New and Improved"! Perseverance, focus and ingeniuty! Kudos to you sir. This is in my bucket list of projects to do. Thank you for sharing!!
Thank you for the kind words! We are working on another upgraded model now that can be mass produced and easy to get set up! Subscribe to be notified!
@@AbundanceBuild I just did! BTW, I'm prepping to build in Argentina, the crunching poverty down there makes this an ideal system for the people that can't get out of the mental box of "concrete and bricks" because that's all they ever knew while EPS goes to the landfills.
Having looked into Aircrete and Papercrete the only system that may compete with Styrocrete IMHO is (saw)Dustcrete for its simplicity and performance. Looking forward to your next vids.
I’ve been watching all of your videos. I’m going to be building a house soon and want to do it as cheaply as possible. Here’s my ideals on the shredder. In stead of a lawn more I would use a 110 volt, one horse power motor on the electric switch. The with pilot bearing and pulleys. I would get the speed needed to shred the stereo foam. To get smaller sixes you might try a mulching blade or on with barbs or spikes welded and balanced on the blade. Just use one of those lawn mower blade balancers. If you use spikes make sure they are sharp just like the blade and it will rip them better. The thing about using a plain electric motor is the cost as compared to buying a new lawn. Mower. You can get the deck at almost any junk yard. Later
Thanks for the tip! Go for it! Subscribe to see new builds coming soon!
If those big bags was air tight, you could suck all the air out with a shop vacuum. Those big full bags would be easy to store.
I have tried that with construction garbage bags, but amazingly...I gained less than 5%!
Great idea- we tried that a while back and it worked pretty well! New builds and tests coming soon!
Totally awesome device.
Thank you!
I don’t know if you have thought of, heard about or already tried this, but I think you could extrude the Styrocrete instead of trying to pump the slurry. If you use an auger something like a post hole auger from a pto inside the right size pvc pipe. You can experiment with different size discharge holes that would effect the density of the slurry. To get the slurry compressed before it enters the form so the consistency of the wall would be the same. A hopper and a Extruder with a hose and you could pump the slurry into a hole in the bottom of the form until it comes out a hole in the opposite side at the top of the form.
Good idea!
Great innovation. Stephen. Your video is so informative. Jun marino from philippines.
Thank you!
amazed with the work and proficiency of your labors and test. enjoy watching you. do you have any videos that show the mixing of styroaircrete? or even your aircrete gun?
Hopechannelcat, Thanks for the feedback. I have made 7 videos now. Yes I go into more detail in some of the other videos.
Brilliant!
Thank you! Subscribe for new builds coming soon!
I wish you made more content. Your material is so good! Your very likable and great at explaining things.
Random question for you:
How long does it take for the styroAirCrete to fully cure?
24 hours. Working on some big builds now! More videos coming soon! Subscribe to be notified!
Before I get into the engineering geek session I first have to give praise where it's due. I just watched all your videos again after a shout out from Aircrete Harry mentioned your "StyroAirCrete" as a solution on stabilizing aircrete in his recent video comparing compression at various depths. (The 12ft column video...)
This is looking more and more like my wife's food processor. The main differences are that the chute is offset and the blade is closer to the lid. I have a sneaking suspicion that finer chopping is probably a result of these two things. I wonder if a better design for this use case would be to create an X of 2x4s under the lid to stop the big pieces from jumping around like popcorn. That would also block congestion in the center of then enclosure where backup is more critical.
Keep posting updates. Very exciting...
Thanks for the tip! Subscribe for new builds coming soon!
Another great video
Thank you!
Hey mate , i really wanted to thank you for your idea. I've spent almost 1500 USD on shredder which unfourtunately didn't worked so good, also i've spent a lot of time thinking how to shred this waste for cheap. Now i finally made this 30USD thing by myself today and it actually worked. Now finally after a lot of failures i can finish my projects. Thank you so much mate👍👍. Cheers from Lithuania.
You're welcome! Great persistence and good luck with your project!
@@AbundanceBuild i have also researched that mixing 160l simple cement mixer. In the ratio of 25kg portland cement 52.5N , 15kg simple sand, saponified wood resin 70ml, fiber 70g, water 10liters and this shredded mass to the top. Mixing these components you can make really strong warm and cheap concrete. I'll add you a video cause i thought this may be interesting for you. I was amazed by the results.
@@music4you632 very cool! We have never tried wood resin as an additive. Thanks!
@@music4you632 yes links are pre-screened to prevent spam but we will check it out!
@@AbundanceBuild anyway this guy did some testing before in his videos and now he already build 1st floor from this stuff and it actually holds. This mix is almost same strong as gas beton blocks and it absorbs 4 times less humidity. It is also fire resistant and warm.
Great upgrade! Much cleaner and user friendly. Here’s a couple of ideas.
1. Set the box of styrofoam chunks on a table beside the shredder so you don’t have to bend over each time to get more pieces. Easier on your back and saves time.
2. Put a wye in your discharge tube about a foot into the flexible tube. You can order a hi volume in-line fan sized for that size of tubing from grower supply houses that will alleviate the clogging issue.
Thanks for the tips! Subscribe for updates coming soon!
congratulations keep coing!👏👏
You got it! Subscribe for new builds coming soon!
what a great idea... I have been mulling this over for some time and never thought of using my extra electric lawnmower...
I wonder if using a thatching blade would have an impact?
I will be making one of these soon
Go for it! Subscribe for new builds coming soon!
Stephen, great videos, very thorough and well made. I can't say enough good things. I wanted to know, have you done a compressive strength test on the styro aircrete or any other strength tests? If it can handle even a fair amount of load, I've got a myriad of projects I want to build with it.
Coming soon!
Another great video Stephen .
Maybe elevate your mower so gravity help with bag issue.
Thanks for the tip!
You need to have 2 blast gates side by side to minimize fluff escape. Also maybe add those mulching springs to the mower blades. The reason the smaller side screen was working for Greg is his dust collection system helped pull it out of the mower shredder...
Thanks for the tip!
Who is Greg? I'm interested in seeing his content as well.
use a 5 gallon bucket as your input shoot. it has a 10-12" diameter and you can get them for free from construction sites or a few bucks at lowes. just cut out bottom and use angle brackets to attach to your plywood lid. get a battery powered sprayer and mix water with fabric softener. spray on foam beads to reduce static charge.
Or dont fully cut out the bottom, leave a flange inside, caulk to block leaks, and just screw that to plywood directly...
Good ideas Khan. Thank you
@@AbundanceBuild I used the 5 gallon bucket idea on my modified Stephen Williams foam shedder V2 and it works perfect. You have to leave 2 inches protruding below the bottom of the mounting deck to stop the foam flying out. I use a leaf vacuum to cut the off take from the lawnmower to get 1/4 beads. I also use bounce sheets suspended in the hopper and it takes all the static out...nice smell too LOL. Thank you again Stephen.
Try using a mulching blade. The "wings" on the back of the mulching blades create a lift that help shred the grass into smaller pieces. I'd bet it would help shred the foam smaller also.
Awesome! Thanks for the tip!
After I watched your first video I went around telling everyone "This man used Styrofoam, STYROFOAM! To build a shop with!" I was like Hyde on That 70's show. Lol awesome!
Haha subscribe for new builds coming soon!
Love it. I was interested in structural equivalents, what dimensions of skyrocketed are equal to an 8 foot 2 by 6, or various sizes of lumber? With the mesh and stucco.
Cohelix I don't have a wall compression tester yet so I can't give you an answer to this. the stucco skin gives considerable strength to the wall. If you build without any wood trusses in the wall as I did on my shop I would recommend increasing the stucco thickness. Mine is barely 1/8 to 1/4 inch thick. My next project will have wood trusses embedded in the wall which will add to the strength.
Thanks for the continued postings! I am curious -- with the Styrofoam added to the aircrete, have you ever thought of also adding steel meshing to the inside of the mixture when making the panels? It seems that would strengthen it's vertical structure, wouldn't it?
He does have rebar that he installs into the forms, after pour the mixture. And when it’s dried, he does line the outside with fiberglass/steel mesh when applying the stucco for structural integrity purposes.
I think if anything, we will have to wait on his video postings of pressure tests that he’s been wanting to do.
Thanks for the tip!
So smart
Thank you!
More videos please!
On it! Subscribe for new builds coming soon!
If I was trying to get a finer shred, I'd build a raised platform to put the shredder on and have the bag below it. I think I'd help with the flow using a finer mesh.
Thanks for the tip! Subscribe for new builds coming soon!
Great videos! STATIC! 😱😆This is a little long, but worth the read if it works. I have a thought about the STATIC issue with the styrofoam. I used to stuff pillows with the mini styrofoam beads (extra large ones are now used in beanbag chairs), and the static was a big, frustrating issue. So, I put a dryer sheet in a spray bottle of water to mist inside the store-bought bag-and shake it good and hard-before making a larger opening to transfer the beads into the pillow, and sure enough, NO MORE STATIC. WooHOO! If Static Guard, Downy Fabric Softer (laundry anti-static liquid) don’t interact with the foaming solution in the StyoAirCrete, this could be a possible option you could try for dealing with the static issue. Another thought, for under $30, you could install a patio “misting” nozzle, the kind used for cooling off while sitting outside in the heat of the summertime, inside your system somewhere, maybe even as you feed it into the mower shredder from a tank instead of a garden hose, in order to prevent the static issue before it even gets blown into the large bag. If this is something that breaks down the foaming solution chemically once the misted styro bits are added to the whole mix, I guess it wouldn’t work, but it might be worth an experiment-maybe try a small batch of foam spiked with a hint of fabric softener just to see if that batch collapses more than would a batch without it, side by side. Even when I am opening packaging full of static-y styrofoam and bits get everywhere, a fabric softener misting bottle on hand makes cleanup a lot easier and less aggravating. I might even try this experiment myself😉 in styroaircrete. When I saw your entire shop snowed with the shredded stuff, my head instantly went to fabric softener. There may be an organic type of fabric softener that could be used if you are allergic to the artificial fragrances in it like I am.
Good idea!
Uniform individual beads for most applications would be best. Likely require two stage operation. Wider outlet screen here to solve plugging screen. Then the batch is run through a rotating drum (expanded lath screwed to plywood disks mounted on pillow blocks. This would run close to another piece of expanded lath). You have solved the mess problem, and this would surely mean more engineering, but those individual beads sure would be beautiful!
For sure!
Thank you for doing this because it has been juicing up my brain to think of all the possibilities this styro aircrete can do. Where can I get more details on how to put together/install the light switch box with the cord, etc... that comes with electric mower. In other words, I need an explanation for "dummies"...lol. I did see some on this video, but I need a little more details of what to buy and how to convert/connect each part. Thank you.
Coming soon! subscribe to be notified
Great content btw! I bet your wife's proud
Thank you!
I have watched all of your videos and will soon be building a shed using this method. Curiosity question: Who is Paul McDowell? You mentioned him a few times in your videos and I'd be interested to view his content to see what his set up looks like.
No longer remember the reference sorry!
My hero
Thank you! Subscribe for new builds coming soon!
Love all your videos. You mentioned once looking at how to pump the styro aircrete in a hose instead of having to lift it manually - any tips on that? Going more water for a more liquid solution? Adding a water reducer but keeping the water amount normal? Thanks!
You would probably need to add more foamed concrete to the mix but this would probably also make it harder to be contained.
We found the pumps to be much slower than our method! New builds coming soon!
Just got a 4x8x6' load of styrofoam panels from a hot tub spa repair place. Another source of free foam. takes just a minute to rip off old vinyl material and get the foam inside.
Thanks for the tip! Subscribe for new builds coming soon!
awesome
Thanks! Subscribe for new builds coming soon!
Really good information and I can not wait to start my new aircrete projects. I am located in Ottawa Canada and I was thinking of doing a radiant garden planter in my passive solar greenhouse using foam aircrete. Would you have any suggestion about using foam aircrete with electric radiant cable?
Hi Sly. Glad this is got you pumped to tackle a project. Aircrete should be used for insulating underneath the slab. And then apply a 3/4 inch to 1 inch concrete topper that will radiate the heat well from the heater. If you embed it in aircrete it will partially insulate the heat from radiating.
FJT
I wonder if it might be better to have the feed chute be offset of the center so it hits the the business end first
Thanks for the tip!
I love your videos, information, and concepts. However, how do I get this material approved by a building department?
Working on it! New tests coming soon!
Stephen, have you experimented with the sharpness of the mower blade?
Perhaps a sharp blade cuts part of the Styrofoam to dust while a duller blade might generate more evenly sized balls. Of course this is just a wild guess.
Cobbles62 I have not tried a dull blade. I sharpened it before I started shredding.
To be honest, I have to say that I've watched every single video you've posted and I'm really interested about this matter. And the fact that I'm a subscriber too. I'm from Sri Lanka. I would really appreciate if you could let me know about the compositions and ratios of materials added in this project. And also I wanna know whether adding a wired mesh (chicken coop mesh) in-between the wall of air-crete and whether this mixture is made by adding soapy foam. Appreciate all your well understandable videos. Keep up with the good work. I'm waiting your kind response. Thank you.
Hi Wahalawatte. I am glad the videos have been helpful. The fire test video I shared all of the mix ratios. I am using 2 mixes. One for the walls like I built I one for loose fill insulation.
Have you ever heard of the Hagfish?
I’m guessing that that it’s slime could improve aircretes structural integrity while holding the styrofoam into manageable clumps during the production phase.
Wow interesting!
Don't know if you could use bigger bags but they used to make industrial strength plastic bags to put the big round hay bales in to make silage without a silage pit. Those bags were really long. Can't remember exactly but I bet 50 to 100 ft or more. They were meant to stay outside in the field for months or a yr or so. So if you wanted to grind enough Styrofoam for a whole house b4 you started or wanted to have a Styrofoam grinding business or just wanted to get the grinder and bag out of your shop, this might work. The bags were a little bigger around than diameter of a round hay bale. Wouldn't have to use the whole length of the bag. Check at a big farm supply store or a big haying equipment dealer to see if they still make bags to make round bale haylage.
Thanks for the tip! New builds coming soon!
Have you done a fireproofing test on the finished product?
Coming soon!
More vids plz man been weeks!!
Busy building! Subscribe for new builds dropping soon!
Hi Stephen. Could you give us links to where we can buy the insulation bag and other materials
Cost breakdown with links coming soon!
I wonder if you could use a positive electrical charge on the shredder and a negative electrical charge on the bag to help things along...?
Thanks for the tip!
I have a Quonset hut-style building in Arizona that I'm considering covering with wire mesh and shooting styrocrete out of a plaster gun. What do you think about shooting this stuff? I'm not too concerned about cracking. Also is pumping a problem, you've probably already done that but I figured I'd ask. Thanks for engaging content.
You're welcome! Pumping is slow and you need a mold to pack the styrocrete in tightly. We dont shoot it or pump it for those reasons. Good luck!
I was thinking about purchasing a used 13 amp leaf mulcher/shredder, then installing a high lift lawn mower blade to pull material in, and pushing it out a fine metal mesh beneath the blade where the material exits the bottom. Any thoughts?
Go for it! Sorry for delayed response
Few things.. Look up how foarage choppers and wood chippers work. Most have a centrifugal blower attaced. Cyclonic air filters are your friend a good design will let you continously fill big plastic bag after bag or even better build a silo for it.
Thanks for the tip! We are working on a couple new designs. Love Precious Plastic by the way! Subscribe for new builds coming soon!
The Italians would have loved to have that old styrofoam when they were building the pantheon they had to use pumice and little air-filled clay pots to reduce weight near the top of the dome
Gracious !!! How do you know all this intriguing information ???
De Young ……… De Young ………..
Hummmmmm……………
Own a museum in San Francisco ???
Thanks for sharing! Subscribe for new builds coming soon!
Stephen. Have you tried a hybrid mix. I was wanting to try a papercrete/styrocrete mix. maybe go 50-50 on the paper pulp and the styrofoam. The paper pulp fiber locks together and the styrocrete should give you a much lighter mix with better insulation than straigt papercrete. The idea is a stronger material (due to the fibers locking) and a better insulative product. I haen't tried it yet. have you?
Thanks for the tip! Subscribe for new builds coming soon!
Yet another great video packed with lots of info, thank you! Where did you get your big bags? Can you share the part number for the blast brake?
Duane, it is the Powertec Dust Collection Blast Gate 6 inch. Home Depot also sells the bags in a 5 pack for $75. ADO 75 cu ft vacuum bags.
tube-type roll plastic (or vinyl) can be alternative instead of vacuum bags.
@@AbundanceBuild Thank you Stephen! I found and ordered the blast gate at Home Depot, When I searched Home Depot website the ODO bags did not come up, when I searched on Dogpile the ODO bags came up with Home Depot's name, go figure.
@@user-kn4lo1il5x How does the air escape out of the bag?
@@duanethieme4186 make some pin holes
Where do you get the bags? Actually, found it in one of your previous replies. I might use these on a dust collection system for my sawmill. Thanks.
Go for it! Subscribe for new builds coming soon!
wondering if changing the blade type would help long cut and mulching makes a difference with grass cuttings... and did you sharpen the entire blade length ?
Yes thanks for the tip! Subscribe for new builds coming soon!
how much reduction in volume do you get after shredding all the scrap styrofoam? if one has a trailer and an inverter this couold be taken to furniture stores or appliance instalation companies and foam could be shredded onsite. big bags loaded on trailer and brought home.
Khan it would cut the volume down by around 40%. Yes this is possible but I typically am tight on time to go and collect and they don't want you hanging around any longer than to pick it up and go. I can shred in the evening anytime I have free time.
Thanks for the video sir. Question please. How much Borax and boric acid do you add to this for insulation purposes. . Is there a magic ratio? thanks much Luke
New recipe video and cost breakdown with links to materials coming soon - stay tuned
i wonder what using mulching blades...or leaf muncher blades would have on cutting and trowing chopped mas out.......a second idea would be to convert square box to round feed shoot,and adding a secondary finer screen...and add a second bag after first bag is full.....vice verse and attach second bag to top shoot..to fill top bag with rechopped styro. from first bag full you are now using as feed bag for finer chop second cut
Good ideas!
Cool
Thanks! Subscribe for new builds and opportunities coming soon!
I had asked a question a while bag for what mesh you are using on the outside? I never saw a answer
fiberglass mesh. Subscribe for new builds coming soon!
This is very interesting. Is Styro aircrete waterproof?
Not alone. Needs to be sealed
el problema es que se traba el material porque no se descarga el material triturado.aprovecha la gravedad para que salga lo triturado y no intente reventar todo.poné mas alto la trituradora y la bolsa bigbag mas abajo. unclina la tolva a 45º para que quede a tu altura al levantar la trituradora. yo sigo con la maquina chiquita tipo rallador y me pasa lo mismo cuando se llena el recipiente.
¡Gracias por el consejo!
Wow😍
Thanks! Subscribe for new builds coming soon!
ENROLL IN THE ONLINE CLASS HERE:
abundancebuild.com
Could you shred it once large screen then hang from ceiling and reshred with the smaller screen to your second bag?
Thanks for the tip! Subscribe for new builds coming soon!
Lol the first second of the video had me rolling.
Haha subscribe for new builds coming soon!
Would it be worth foregoing upsizing your chute in favor of installing a foam cutting wire on the top edge? Just take your foam and press down and the cut piece falls directly into the chute in one motion.
We thought about that as well. In theory it seems like it but in our experience with wire cutting Styrofoam it is a slow process. We fill up bags quickly this way! And we need to fill a lot of bags to build a house
@@AbundanceBuild Well, for whatever it's worth, I don't have the beautifully conceived set up you do (there's a reason I ended up here tonight,) but I've been cutting my styrofoam up on the band saw. I'm sure with only a little thought you could rig up a slide that would feed from the bandsaw table directly into the chute of your foam shredder. You'd obviously have to get the height right, but that might be the best of both worlds, with or without upsizing the chute.
I'm only aiming for medium to small gravel sized chunks to add to traditional concrete in order to improve the insulative value of my foundation. I think your design is exactly what I need.
do you use mulching blades on the mower?
Not yet! May make that upgrade on the next one. Subscribe for new builds coming soon!
Have you tried 1/2 inch hardware cloth for the mesh? Just curious.
Thanks for the tip! Subscribe for new builds coming soon!
Would this stuff be ok insulating my attic?
John yes it would. Watch the Fire test video. You can treat the EPS with Borax and boric acid and it makes it fire resistant.
Get two blast doors and some duct to match the volume required for a batch of EPS-CRETE then you can eliminate the measuring step and go straight to your mixer, no mess, no mister required.
Great idea
I love the sound of this, could you explain a bit more how this would work
So you would take a length of duct pipe to see the volume of each ft of duct. So if you figure its 5 ft worth put a gate valve on bag and one after five ft of duct. So fill the five ft section then close to bags valve and empty the pipe with the he right amount every time.
@@jeffkrupke3810 Brilliant!
@@jeffkrupke3810 would a 5’ section make the right amount ? If you e done the math , makes it so much easier for ME !!!💞
Could you please put links to the supplies you use in the comments.
Coming soon!
Are you using a mulching blade?
Seems they blow more debris and clippings out of my mower when the shoot is open.
Thanks for the tip!