CHEVROLET CRUZE DOWNSTREAM OXYGEN SENSOR REPLACEMENT LOCATION OXYGEN SENSOR 2 REPLACEMENT
HTML-код
- Опубликовано: 20 янв 2025
- CHEVROLET CRUZE DOWNSTREAM OXYGEN SENSOR REPLACEMENT LOCATION. OXYGEN SENSOR 2 REPLACEMENT
In this video we will show you how to remove or replace the downstream oxygen sensor ( also know as sensor 2 ) on Chevrolet Cruze also known as Holden Cruze and Daewoo Lacetti. We demonstrated how to remove and replace the oxygen sensor on Chevrolet Cruze with the 1.8 engine but it may be helpful on the 1.4 engine since they share many component. We showed you how to remove or replace the downstream oxygen sensor on a 2015 Chevrolet Cruze but this video should be helpful on:
2008 Chevrolet Cruze Downstream Oxygen Sensor Replacement Removal Location
2009 Chevrolet Cruze Downstream Oxygen Sensor Replacement Removal Location
2010 Chevrolet Cruze Downstream Oxygen Sensor Replacement Removal Location
2011 Chevrolet Cruze Downstream Oxygen Sensor Replacement Removal Location
2012 Chevrolet Cruze Downstream Oxygen Sensor Replacement Removal Location
2013 Chevrolet Cruze Downstream Oxygen Sensor Replacement Removal Location
2014 Chevrolet Cruze Downstream Oxygen Sensor Replacement Removal Location
2015 Chevrolet Cruze Downstream Oxygen Sensor Replacement Removal Location
2016 Chevrolet Cruze Downstream Oxygen Sensor Replacement Removal Location
► Downstream Oxygen Sensor: amzn.to/2GPijVl
► Check out our Amazon Store for the tools and parts that we use: www.amazon.com...
► Our Website: mechaniclifesty...
► Our Baby Girl Channel: goo.gl/WiVs8Y
► Our Second Car Channel: goo.gl/XB6fHq
► Honest Product Review Channel: goo.gl/sMPQXk
► GoFundMe Link: goo.gl/pUife3
Our Most Popular Videos:
► Bumper Repair: goo.gl/XBe4Sh
► Missing Wheel Lock: goo.gl/5n4a5i
► Bearing Replacement: goo.gl/JSNDnZ
► Restore Headlights: goo.gl/qVhDkf
♦♦♦ Cameras & Gear Used For This Video ♦♦♦
•Cameras
Panasonic Lumix FZ300: amzn.to/2BNWtNA
•Tripod
Polaroid 72-inch: amzn.to/2iVTmP4
•Microphone
Polaroid Pro Video Condenser: amzn.to/2krpSsA
•Light
NEEWER 160 LED CN-160 Dimmable: amzn.to/2jjg9Bd
•Comuter for editting
Lenovo ideapad 310: amzn.to/2kqUNFl
♦♦♦ Other Equipment and Gear that I use ♦♦♦
•Camera
Sony HD Video Recording HDRCX405: amzn.to/2jk8nqB
•GoPro HERO5 Black: amzn.to/2ktNKfj
•Extra Computer For Editting
Lenovo Ideapad 510: amzn.to/2ktOuB7
► Like Us on FACEBOOK: / worldmechanicsofficial...
► LIKE & SUBSCRIBE for MORE DIY VIDEOS that could SAVE YOU BIG $$$$$$$ !!!
This is not a sponsored video. Everything is purchased by us!
The video is meant for entertainment purposes only. Do not Attempt!
AMAZON ASSOCIATES DISCLOSURE
Auto Repair Guys is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com
*Disclaimer
We, Auto Repair Guys, are not responsible for property damage or injury incurred as a result of any of the information contained in this video. Information given in this video does not guarantee the desired outcome. Any injury, damage or loss that may result from improper use of the tools, equipment, or the information contained in this video is the sole responsibility of the user and not Auto Repair Guys.
⛐ Check out our Garage to see what tools we use and recommend:
www.amazon.com/shop/worldmechanics
⛐ Subscribe and hit the notification bell by the subscribe button for new videos: ruclips.net/user/AutoRepairGuys
⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys
I just replaced that o2 sensor. Put your car on ramps and its easily accessible. It it's hard to turn..hit it with some heat or just let the vehicle run for 5 minutes. This will allow the metal to expand and make it easier. I used a a common crescent wrench and a dab of anti sieze. Done..took 10 minutes.
Thank you, I needed an easy way to do this
I actually came here because I couldn't get the sensor disconnected from its electrical socket. Glad I'm not the only one who struggled with that part lol.
Thanks man
Yeah I used needle nose pliers
Took my 2012 Cruze to a lube service pit for easy access. Sensor didn't come off easily though. Got loose after 4 strikes with a hammer. Used the open end of a combination 22mm wrench
I’ve replaced mine and my light I still on. Should I replace it with an oem one
Thank you for the vidéo 📹
Very helpful video
Have you ever heard of a stabilitrak light coming on, saying it's not working, whilst idle and then goes off when you start moving on a 2013 Chevy Sonic?
No, but my stabilitrak light comes on when I start moving, 2016 sonic. Also has a rear o2 sensor fault. When I replace mine I'll confirm if that solves the stabilitrak problem
you need a tune up as well that mean my 2012 chevy cruze go away
i have a 2016 cruze limited , at times it struggles to turn over and it sometimes has a rough idle to the point it just loses all power and i have to restart it. what could it be
I have that problem right now. I need help
@ So update on mine.
i've changed the O2 sensor, the purge valve canister, both cam positioning sensors, both Cam solenoids, cleaned the throttle body, MAF sensor, new engine filter and cabin filter. it still hard starts every now and then but not as much anymore
Is that a bank 1 oxygen sensor catalyst system?
Hola no sabes porque mi combustible marca mal de mi Chevrolet cruze 2010
Do you have the wiring diagram of downstream sensor to the ECM please? because I might have a short in somewhere because I have upstream sensor readings is higher than the upstream one.
Very nice!!! 👍🧔🏻
Hello brother my chavy cruze 1.8 have code P0366 what mean
I have a po 171 code but my mechanic says he doesn't see a vacuum leak...
dang this looks so easy mine feels like its welded cant take it out 😔
Tbh...
Same
@Peter Macias just don't do it when it's hot cuz WD-40 is super flammable
Wd40. Let it sit for 20 mins. Came out easy
Do I have to leave the battery disconnect after replacingnit
Hi,
Off topic but why is the oil cap different? What is the name of the track?
Quick question , I bought a new o2 sensor for my new exhaust and it looks like the ports are there same , is there another extension on it I can take off ?
Is the downstream sensor in the same area for a 2015 Chevy sonic
greeting, I have a sonic 2013 and I have the code p0030, it shows the bank 1 and the bank 2. how could I know the flaws?
sir i have cruze 2012 having pick up problem what i can do
Honestly get something else.
I agree, get something else, I have a 2014 cruze and I’ve already had to swap my turbo out twice, fixed the head, and it’s just really frustrating having to deal with all the problems that car brings to you
@@jaydubz1918 I’m working on a 2012 Cruze and it’s my daughters. Took to emissions and they said code for the turbo something if tripping. I’m pretty dam sure it doesn’t have a turbo. Unless you wouldn’t feel it but I’ve driven a turbo before and there is usually a gauge and obviously feel it and blatantly see it under the hood.
@@judd0112 If its a LT Cruze it has a turbo
What size socket? It says it's in the info and it's not
Chevrolet cruze lt vcdi 1.7 2012 EXHAUST GAS TEMPERATURE sensor 1 can you please show me where I can find places
Is it o2s b1 s 2?
I replaced mine with a trumpet mouth piece.
You didnt put no new sensor in 😅😅 I dont blame you tho. Your point is to SHOW US how to put stuff into these cars. Even if the car you are working on does not need it
I used a regular wrench without the socket
Lies
I can replace mine that was very easy
I have my oxygen sensor up front on my 2014 chevy cruse is that's where it's supposed to be ?
I got this my cruze 2015 P015A
Why , my car Cruze 1.8 Fuel Consumtion High , 5-6 km / Litr
If he says OK one more time!! 😵💫
i wish this was on the 2017 chevy cruze hatchback with turbocharger
1ST PERSON TO TELL ME HOW MANY TIMES HE SAYS "OKAY" WINS A RANDOM CASHAPP!!
46 times $Killersaint89
@@killersaint89 did he pay up?😂
cruze code 136 pls help
where is bank 1 sensor 2 chevy cruze diesel 2014
Bike seat is too low. Make knees hurt and not efficient
It ain't that easy to break, I've been trying for 2 weeks to take that stubborn sensor off lol
And have also checklinght
Славянский акцент. Кто ты воин?
You seemed to scattered to me
*too
Cod 2096