COMPLETING THE MANUAL SWAP ON THE Z!
HTML-код
- Опубликовано: 2 июл 2021
- ITS DONE! We had a bit of a rocky ending, but the 300ZX is finally Manual Swapped and ready to cruise!
THE COMMITTED CREW:
www.TheCommittedCrew.com
FOLLOW ME HERE⬇️
•Instagram - / robbieferreiraa
•Facebook - / robbieferreiraa
•Twitter - / robbieferreiraa
SEND STUFF HERE📬
PO Box 94 Wasaga Beach, ON, L9Z 1A2 
Авто/Мото
“ it’s v6 but it sounds like a v8” every v6 mustang owner 😂
Pain bro. Only pain.
Vg30dett actually sound amazing (turbo model, the NA sound meh) some actually think it’s V8 let me link you a vid so you can understand :)
ruclips.net/video/1JoIe1j0kXA/видео.html
@@VeilSideZ32 nobody thinks it’s a v8 my guy
@@Puppyboi12345 look at vid lol
The Z without the manual harness be like: I DOONT UNDERSTAND 🥴🥴😅
There is a manual swap plug and play harness that has your neutral safety switch, reverse lights, and gear indicator light (if you've got that) and it's relatively inexpensive
너도 중립이냐
Chris is talks like such a dad when he’s motivating Robbie 😂.
Hey robbie you should probably get a starter for the manual if your using the automatic starter the number of teeths may be different and the sound the starter makes when it turning the engine could damage it went through something similar with a corolla and a 4AGE black top the flywheel was for a silver top and that small difference caused the starter to go bad after a while
Starters are the same for auto to manual, TT trans with NA auto starter needs spacer
Seems like everything would have been easier if you had a right hand drive version
feels like you bought a trans out of a right hand drive z and a master for a right hand drive z
Dunno about the master but the trans is the same on lhd and rhd
my miata has the slave on the right and master on the left along with the port for the master coming off the left side of it just like the 300z its not that uncommon with the 90's jdm
The Z manual swap seemed like it happened in the blink of an eye... You guys killed it! I want to see the LS truck Vs the Z!
Don't get rid of the shift lock sticker. Will be a reminder to what it was
Was thinking the same thing
Facts
What a beautiful machine , so full of personality and character.
So cool to see a bigger channel pick up the Z32 platform! I ran mine open header at a few drift events but got annoyed lol. Looking forward to see what you guys have planned for it.
That's a very interesting sound with open header's, I kinda like it, but it's probably extremely loud😂
Perfect day for a Robbie video! The Z is 🔥🔥🔥
Exactly what he said 👆😎
Super clean boys, love watching the vids!!
Ngl i stopped watching u after the eg was done, but now that i come back, u haven’t even hit 300k subs..? I literally thought you’d have a million by now. Shits bs, ur actually the most underrated car RUclipsr!!
When I seen your smile after shifting into 3rd I felt the love and passion you have for cars and building cars!
Also One thing i have always respected is that you show your mistakes unlike most.
Yeah, and shows his process for fixing it. Definetely as a beginner to working on cars things like that really help.
It’s awesome seeing you live out your dreams man keep em comeing
Finally ordered the committed crew window banner, been wanting to get one for time but usually forget when I got money 😆
Great video Boys! Watching from Midland Ontario
Let’s goooo! Looking good man! Enjoy the fresh manual swap!
ayyyeeeee, wasn't expecting a video today, but I'm not complaining
Love the car man great job, next time let Chris drive the car, he was Definitely wanting to drive it.
I love this channel omg
more 300zx content !!!!
Great job. Just a heads up. Had the TT version of this years ago. Pushing 450 BHP. Common issues I found were weak lower wishbones. Hit a pot hole and they can bend/split. I believe there is an aftermarket stronger version. Also Poly bush the suspension. The PTU (Power Transistor Unit), relocate from the front of the engine (cam cover area) to somewhere cooler. Sometimes the solders lift inside and you have a car that won't start at the side of the road. They brought out a series 2 PTU to solve this, but many complained they had same issues of non start when car was hot as under the hood gets hot and she won't start until cooled down and solders reconnect inside the PTU. Two small fuel lines at front of the engine sometimes go brittle and leak.
Tbh it looks better even tho you didn't do anything to the outside of the car 😂❤️
Love you guy’s videos !
the z sounds like my 94 toyota 4runner when its straight piped lmao
Congratulations! Great job!!🤙🏼
Awesome job
JDM stuff be like right hand drive and make it hard for you boys 😜
Great job guys 👏
Videos are amazing keep up the hard work
Robbie you got me into jdm and I am a gear head now thank you so much😂
bro love the Z keep up the great videos man🔥🔥
Ima be honest I hate when you upload cause I get so excited when you post and I get done with the video and now I gotta wait 🥺 this sucks but I literally love your videos makes me really want to start my own channel
YES YES YES YES YES YES
You also have to adjust your clutch fork on the pedal
Robbie I love the vids man your amazing ❤️
Whats up Robbie I'm all the way from South Africa bud
That is a z think I put new slave cylinder master cylinder everything in my z31 but the clutch master does point the wrong way I put aisr clutch cable it is steel braided with the yellow nylon plastic coating over it and it does point the wrong way you write it down and under the master and over-the-top of the trans down over the passenger side of the trans down to the slave cylinder it is kind of weird I thought also I've actually got to pull my trans out this coming weekend to put my fidanza 11lb flywheel and clutch kit in
It’s completely done!!
I had to stay patient and committed today haha I was changing out both front end CV axels on my 96 impreza and they have push pins in them that you have to remove AND re install. Went hard and got it done though💪🏼
New music 😳 loving the vids
It’s the parts at the end for me 😂
yoooooooo lets go 🤟🏼
This the earliest I've been
Dude, this sounds like my when I had my V6 Firebird straight piped for a minute when the cat was clogged. I honestly love it because it's total opposite sleeper effect. Sounds like muscle with no go 😂
You said you like it Robbie? Guess what, I also like it too!
LETSSSSS GO BABYYYYY
the funnier part, is there are 2 version of the 9-99 z32 clutch pedal also, one for na car and one for tt car. one uses a clutch booster behind dash (TT_ and the NA does not. z32 was DEF over engineered
God bless the algorithm that brought me here
Can someone explain to me the wiring I'm having the same issue with my car not starting after doing a manual swap. Same car 300ZX
Sounds exactly like my Acura Legend that doesn’t have an exhaust right now xD
Impressive...she gots power,can’t wait to hear it with an exhaust,maybe str8 piped🤟🏽
damn son almost looks like my Z, besides i got the ole MB battle wheels😂
Fuck a clutch break in let’s drop that shit and do a burny
13:57
Seeing Jasmin brings back old memories 😭😂
Yess
Great vid, I'm curious how much did the whole swap cost you ?
heck yeah bruther🤘🤘🇺🇸🇺🇸
Brother get a starter from a manual, that’s why it wasn’t rolling because the starter gear is pry longer so it stayed engaged
Love it
I cant get over that he looks like Dewey from Malcom In The middle
What the tent thing they used for the red car
The Z sounds so good
Well done for staying committed gents 😂🙌🏻👏🏻
Holy shit, that 300zx sounds just like my 280z the beautiful sound of a 6 cylinder
There’s supposed to be an inch or so of play on the pedal before you start to feel tension, set it anywhere else and the clutch may not fully engage/disengage and prematurely wear
What colour you painting the Z
How much was it though and what would I all need?
Lmfao 😂😂 that's not Worth checking out 🤣🤣🤣
How much for the fog lights
Neutral safety switch, just like a Park Neutral lock out switch on an auto, keeps you from turning a car on when clutch is not pressed
Who needs that, just jump in the car an start it, no problem
The reason your master and slave cylinder placement seem so impractical is because like most Japanese cars of that age they were originally designed as right hand drive cars - so on a right hand drive z the master and slave would be in a straight line from one another.
Z32 is the legit jdm muscle, if its time.
Yo I have that shirt. Yonaka is solid 👌
Early gang
What wheels are those?
CHICKENS NUGGETS FOR THE WIN
dont you have access to a 3d printer? i would try to make a gated shifter with it and then paint the part so it look ok.
welcome to the hood! lmfaoooo
Stret pip the z
how much for the car
Lol looks like the parts were for a factory to rhd manual conversion not a auto to manual conversion
Hey Robbie, just ran into your channel, and I am hooked. Love what you did with your z32. I use to watch Danny z channel, but since he sold his z32 I am out for good he is in a wild and crazy quest. hope you never sale yours as I will be watching your channel as your z has been restored.
Time to manual swap my FRS 😎
Wonder where that tractor got it's vent design 🤔
The Z sounds like a 18 wheeler 😂
We still want 300zx content
in 100 years when no one can drive a manual because lets face it its a dying breed. there will be a surplus of auto parts for all these classic cars.
Nice car
The transmission harness is $180. I saw one on FB Marketplace for $100
It sounds a lil bit like a grand national
Can you manual swap my Genesis?
Glad the swap didn't take as long as Jenny. Nothing better than finding a donor car and pulling every little thing from it you need.
one day
I can actually say that you can beat on an auto. Had a 91 dodge dakota that was auto. Blew the motor on it doing burnouts, doughnuts and speeding in. Blew the pistonrings and heads.
Gonna try to tint the windows? 🤔