DIY filament dry box
HTML-код
- Опубликовано: 15 сен 2024
- Simple filamet dry box. Designed for standard size spools (200 mm in diameter, 68-70 mm wide, central hole 52-53 mm).
Plastic containers used: www.temu.com/g...
3D print files: www.thingivers...
followed your guild... turned out brillient... very nice... did not have any of the nuts bolt or rod so printed then and glued them
Happy to hear you are satisfied and you managed another way 👍
I put 2 cups of orange desiccant and the humidity has fallen to 10% , ambient humidity in my area is 38%.
who is the artist for your music?
the artist is 3p1c-h1d3r
in contrast to the other German who thinks its overthought - I really appreciate this design, there's less friction on the spools, especially on the paper ones its great because kinda no dust is created. The jig is well designed, must lot's of try and error to get the measurements right, thanks for that as well. Do you have a product recommendation for the d4/d4 coupling, I cannot find one? Thanks in Advance!
Hi Björn, thanks a lot for your comment! The features you mentioned are exactly the reasons I used that design 👍
I've bought batch of d4/d4 couplings here: www.temu.com/goods.html?_bg_fs=1&goods_id=601099528095707 (PU 5/32 )
😉
@@libor-vitekAwesome, thanks for the link and your swift reply :)
The u turn to close loop the filament when not in use is unnecessary, I understand the idea is to prevent humid air to get back in but since the gap between the filament and the PTEF tube is so small the amount of humid air getting in is negligible.
I think the end of the filament cannot pull moisture that way.
maksad mein maddad hogi isse
Was für ein irrer Aufwand. Da gibt es Lösungen für die selben Boxen, man druckt einen Rahmen der von oben eingesetzt wird und ein Mittelstück für die Spule. 2 Teile zu drucken.
Šílené úsilí? To si děláš srandu. Jo, asi vím, které řešení popisuješ. To zase pro změnu připadá šílené mně.
*promosm* 💐