ALARM 1 or GRBL ERROR 9 or SHOCK AND MOVEMENT DETECTED on your Diode Laser!
HTML-код
- Опубликовано: 13 сен 2022
- ➡️ Click on Show More↙️for the LASER RAFFLE and other Links!
ℹ️ REMOTE HELP HAS BEEN DISCONTINUED, SORRY
ℹ️ Home position hack, this link is the timestamp I discussed in the video:
🔗 • Review of the Pergear ...
The LaserMATIC 10, 20 & 30W: King of the Diode Lasers!
➡️ rolyautomation.com/lnJ4A7
The LaserMATIC 10, 20 & 30W are now IN STOCK!
The Roly Automation Facebook Group:
/ rolyofficial
=======================================
Follow me on Instagram for behind-the-scenes pics and videos!
/ louisianahobbyguy
Shop my Amazon Store for focused laser products!
www.amazon.com/shop/thelouisi...
Remember! Anything you buy on Amazon after following this link supports the channel and doesn't cost you a penny more!
=======================================
🏆Become a Patreon Supporter for insider benefits and downloads!🏆
Patreon supporters get 80-100% OFF in my graphics store!
engraveandcutfiles.com/
/ lahobbyguy
=======================================
➡️ My hobby Forums: lahobbyguy.com/bb
Facebook: / lahobbyguy
Facebook Group: / lightburnsoftware
Need to message me? m.me/105768145045320
Check me out on Rumble! rumble.com/c/c-3325164
=======================================
👉EXCLUSIVE $200 Discount Coupon on the Gweike Cloud Co2 Lasers!👈
If you're looking for a Co2 laser, use my exclusive discount code!
This code is good on all laser website purchases at www.gweikecloud.com/
➡️ Coupon Code: LAHOBBYGUY
(Coupon code not valid on pre-orders of new products)
➡️ 8 Neodymium Magnet - World’s Strongest Rare Earth Magnets - $13.99
lahobbyguy.com/magnets
➡️ 4 Physical bed Material Standoffs - $17.99
(ALWAYS LIMITED STOCK)
lahobbyguy.com/4standoffs
➡️ 3D Print Honeycomb bed air gap Standoff STL File
lahobbyguy.com/bedlegs
➡️ 12” x 12” x 1/8” Premium Baltic Birch Plywood A/A Grade (Box of 45) - $69.99
(Other Sizes Available)
amzn.to/3KCDWIU
=======================================
THE MOST REASONABLE DIODE LASER COMPLETE PACKAGE AVAILABLE!
👉 This is a special VIEWER ONLY package deal!
🔗 lahobbyguy.com/package
Laser, Roller Accessory, Enclosure & Honeycomb Bed! $465!!
Take an ADDITIONAL 7% OFF with
Coupon Code: ➡️ HobbyGuy
=======================================
I want to give a BIG SHOUT OUT to all my viewers who are supporting me in this effort! Thank you SO MUCH for your support!
If you appreciate my tutorial videos and template downloads and want to buy me a cup of coffee, or a beer to help support the effort, but don't want to sign up as a Patreon, I would greatly appreciate it!
🔗 PayPal link: paypal.me/lahobbyguy
=======================================
Need to mail me something?
The Louisiana Hobby Guy
4945 Grand Terre Drive
Marrero, LA 70072-6613
Lightburn Software - Try Before You Buy!
🔗 lahobbyguy.com/lburn
Lightburn printable shortcuts guide:
🔗 lahobbyguy.com/lb-keys
=======================================
Most of these links in the description here are affiliate links but will NOT cost you a penny more! In fact, most of them will be bargain priced, since I shop for the best value!
=======================================
➡️ Pre-Cut Leather - 3" x 48" - 1 Strip - $16.95
amzn.to/3OCSdGE
➡️ The Walnut Road Collection of high grade USA grown and CNC'd hardwood coasters:
www.walnutroadcollection.com/...
info@walnutroadwood.com
➡️ Use Coupon Code HOBBYGUY for a 25% discount!!
➡️ Ocooch Hardwoods:
ocoochhardwoods.com/
🆕 The NEW ORTUR CHUCK ROLLER! No Assembly Required! $179.99!
s.zbanx.com/r/44TfKGdByI9o
Ortur Laser Master 2 Metal Enclosure, for LU1-2, LU1-3, LU1-4, LU2-4, OLM2-S2-SF:
amzn.to/3fg0qPX
The CORRECT glasses for my diode laser!
amzn.to/33QQHNU
CHEAP and effective transfer/mask tape
amzn.to/3HVzGR6
Stainless scissor platform for height adjustment of my bed
Several sizes to choose from
amzn.to/2QVUSSa
Steel bed for my other laser:
amzn.to/3BVoBgb
"Punk Spikes" for the steel bed:
amzn.to/3mAMBjV
LED light bases - 2-pack - CHEAP and nice!
amzn.to/3yEdPK5
Pre-cut Acrylic for LED light bases
amzn.to/3HTJHhx
10-pack of Acrylic, 5x7 clear
Several sizes to choose from
amzn.to/3JXqmhk
60 Pack of thin wood rounds
amzn.to/3oTRwvA
Slate coasters with a stand
amzn.to/3qfIiMk
#LaserMATIC #Roly Lasermatic10 #ortur #orturlasermaster2 #lightburn #tutorial #Atomstack #Aufero - Хобби
*ANOTHER TOP REASON* is being in Current Position or User Origin instead of Absolute Coordinates.
Rich, thank you so much for this information! I haven't been able to make use of the full cutting area of my D1 10W without the laser head hitting the frame, even though I used a square during assembly! I'm going to go through the video again (at the laser) and follow your tips. I bet that I'll be a lot happier with the machine afterwards! I appreciate your thoughtfulness!
My pleasure Jody, thanks for watching!
Had the same problem and your fix made it work.
Glad it helped!
Well, well, well....you just answered exactly what has been happening on my machine. TOLERANCE in the Size are not the same on ALL lasers. This is something every NEWBIE out there should know about. My Laser head has hits, because the size as advertised only kept pushing the head into rail and yes chattering. What's really an eye opener...the belts on that D1 are like bulls in the china shop...lol. Lightburn says yep that's the size we need....D1 ok...I'll just keep pushing till I get there. Thanks Rich, for putting this video together. It will help a lot of newbies.
Awesome Kat! Glad you found the problem!
Another great video. I don't have this issue but I didn't know about the Whitespace scan item. I have been loosing time. THANKS RICH!
Glad to help John!
very good, I'm Brazilian but with the subtitles in Portuguese I managed to understand and I configured my machine that was giving this error, thanks.
Happy it helped! I'm always way behind on the subtitles because they take so long to do.
Thanks! You are a great instructor
Thanks for the support Mark!
Lots of good points. Thanks.
Thanks for watching Merrill!
thanks rich for all you do for us
I appreciate that Jim.
Thanks great information
Thanks for watching Martin!
I made my old diy frame bigger and had the same issue. I figured out the same way (ish) 😂 great advice
I could not find the small LM switchs i had laying around then i asembled the frame. I use some hard limits on the Y axis (i have procured to be perfect square, my home position is always 0-0 got my bed marked and have a little metal square. I only have to be sure the laser gets powered in the 0-0 xy and its perfect every time)
Awesome! Thanks for the comments!
Thank you so much!!! We were having the same error.
Glad I could help Cynthia!
Thsnks Rich uour Videos have helped me greatly have an atomstack a5 it did that all time
Glad it helped Tom!
WOW! This video solved my problem. Thanks Rich! What did we ever do without RUclips?
I know what you mean Dave! I tend to search RUclips whenever I have a problem around the house or with the car, and BAM, there's the answer!
Thanks!
Thanks so much Tom!!
I always set mine a bit less than the actual work area. Good advice
It's probably good practice on all machines Dave.
Thank you for all your videos, they are greatly appreciated, I would definitely do this to my machine when I get home today, I do have two questions for you, 1. How do I activate the "fire" tab in the move screen? Is it not available for the X tool D1? Also another issue I have is when I'm in the middle of a job, burning a tile or whatever and I simply just open another tab on my laptop, search something on line or watch videos on you tube to pass the time, the laser starts slowing down and not firing properly basically messes up the work piece, but as soon as I go back to lightburn it takes a couple seconds but it goes back to normal operation, why is that? As long as lightburn is on the screen somewhere it's fine even in a small corner, but when it's in the background or minimized it doesn't work properly.....ok 3 questions
The fire button is in the Device Settings. I don't know about the power issue... maybe a bad power supply?
hello my friend!
I watched your entire video, and a very well explained one indeed. I have the issue of moving out of the corner where it is homed, by framing. when I hit framing, it wants to move into the corner more and then locks up and I have to always turn the machine off and back on again and then it will frame, until it homes again. I even brought my workspace down to 100x100mm and centered it as you said and it keeps locking up. I have the Comgrow Z1 10Watt, and this happens in current user position. If you have any ideas, I would love to hear them or if you are able to remote in, we can discuss that as well. Im not sure where to go from here brother, but thought I would check with ya. Thanks a ton for all your help.Stan
You have to understand origins Stan: ruclips.net/video/T8DZLl1O0xo/видео.html
Muchas gracias, fue de mucha ayuda su video, tengo una maquina y un software diferente al del video, pero la solución fue exactamente la misma!
Un placer, gracias por mirar!
Hello I have an issue with my longer ray5 20w that is throwing error 2 3 and 8 can u help me out with it please
Try posting on my free forums. lahobbyguy.com/bb
The one that always got my was the gyro on the Z1. Laser would stop mid-job constantly. Ended up disabling it. Now I just have to watch out for comm errors as the output doesn't turn off for those. 😱
Yes, I bought a new USB cable.
I was gonna say, check your USB! Stole my fire! 🤪
Ever had alarm 3 happen? I can't seem to figure out why my machine stops and say "alarm 3" all of the sudden with no changes to my work space.
Alarm 3 is a reset while in motion. You're likely working in current position and the laser went out of bounds. Use absolute coordinates instead.
I'm new at this with Lightburn. My designs are coming out wide nothing is coming out per my dimensions. Hopefully you can help. Also how do you make a image a line not a fill so I can cutout my image "like a Redfish image but cut out the image". Thank you for your time.
I would suggest watching the playlist called Lightburn College. I discuss all this and more in those videos Jen.
Hey Rich , I need help ...just purchased a laster master 3 ortur. All hooked up, lightburn ready.. so here's the problem I can't engrave letters or pictures ??? It stops in about 15seconds ? So here's the weird part if I make a circle, square, hexagon shape from the light tools on the left hand side within lightburn..it runs fine , doesn't stop , will engrave the shapes, will also fill the shapes, doesn't stop at all ??? I don't understand what's going on ..am I missing a simple setting within lightburn? I need help been at this for 2 days please thank you
I can't really help in a text. You can open a ticket at: ortur.tech/support/
Caan you help me I need to correct all my settings. Can you log on and fix my problem. I have a Sculpfun S9
Go to the console and type $RST=$ and press Enter.
helo my name is Eli I am new at this I just purchased a crealty falcon2 12W laser engraver and looking at one of your videos and I started to engrave on wood then on clear acrylic everything was going good but now the machine is not even frameing at all alarm 3 comes up can you set me up with this problem or fix it for me thanking you in advance on this matter I also purchased a falcon2 10W have not put it together i am really investing on this bussiness but i am having this issue
Switch to Absolute Coordinates and home the laser. Then don't move it by hand again. ruclips.net/video/T8DZLl1O0xo/видео.html
hi can someone help please! I have a laser Grbl software with Kentoktool laser400 pro. The laser has been working fine but recently during a burn it will make some beeping sounds, which comes from my Laptop and then it stops midburn! I've wasted so much wood! HELP ME PLEASE.
LaserGRBL has a RUclips channel. Probably best to ask there, though this sounds like a computer issue.
One question: For example, if you call for a 6" x 6" square, does it make a 6" x 6" square? Calibration could be the issue too.
I hope this helps. Have a great day.
Calibration is done when you first build the laser Glenn. You cut a square, measure it and compare it to the settings in Lightburn. If those settings are off, you simply click Edit --> Machine Settings and then click Calibrate Axis. There you can enter both the size requested and the size it actually cut, if different, and then just write the variance to the controller.
Hola. Me podrias ayudar ? En la consola aparece en rojo ALARM:11 . Tengo una Ortur ML3, 25 días usándola. Sin problema hasta hoy. Ya limpié el lente del láser. No lanza la luz de laser para grabar. Gracias!
El error 11 significa que se excedió el límite máximo de caracteres por línea de desbordamiento. Lo más probable es que el archivo tenga un formato incorrecto o que la configuración del dispositivo sea incorrecta. Realmente no puedo diagnosticar esto en un texto.
@@TheLouisianaHobbyGuy muchas gracias por tu respuesta!
👍
I ran into this problem after installing rotary and the code 9 error started popping up right after that even after rotary taken out. The error occures even when I frame a job or start a job which stops midway due to this error.
Hope you got it fixed.
@@TheLouisianaHobbyGuy Unfortunately it didn't solve the problem. The strange part is that this issue happens only on MacOS but no problem on Windows. Perhaps I need to operate laser on Windows and carry on.
Hi Rich. I am a newbie to laser engraving and I am having a problem. I have a foxalien 4040xe and when I try to frame a project the gantry moves to the far right and continues to run. I watched this video and did as instructed but still have the problem. Any help will be greatly appreciated. Thank you for all of your videos and help. Mickey
Does it have a laser/CNC switch? Some CNC machines have the switch hidden in a little cut out on the control box. If not, I would suggest you contact Foxalien Mickey. CNC machines don't operate in positive coordinates like the laser does, and I'm sure they have already gotten hundreds of help requests for this.
@@TheLouisianaHobbyGuy yes it does have the switch and I have it set to laser. I tried to set up an appointment on your calendar but unfortunately you have no openings. I will try to contact foxalien. Thank you for all you are doing.
@@mickeyb8485 did you solve the problem
@@sametsanli02 yes thank you
@@mickeyb8485 how can i make switch settings
How do I fix error 8? Please help me.
Error 8, _(cannot be used unless Grbl is IDLE.)_ can be a lot of things. Usually, it's a bad power supply and the control board is _"browning out"_ during a job. Try running a job at 10% power, if it works, it's a bad power supply. If not, it could be electrical interference from the wiring, like a refrigerator or compressor with a hard start on the same circuit, a bad ground, or a bad USB cable.
Anyone having problems with the xtool d1 working properly with the extension added?
So far only a few complaints that changing the bed size in the Device Settings solved as far as I've heard.
I saw your AMAZING GRACE on FACEBOOK I think but can't find it again. Could you do a video on how you did it. PLEASE. I would like to do one for my Father-in-Law that passed 9/12/2022
I'm not sure which post you saw, but all the FB posts are tied to videos I made. It should be on the channel.
@@TheLouisianaHobbyGuy the most resent one I see on the site is 3 Sept.
Maybe it wasn't you but I thought it was. It could have been by someone else, and I thought it was yours. Have you seen it somewhere else??
@@raider6511 Go to the channel dashboard and click on Videos. All of my videos are there.
My ortur master 2 pro won't frame. It says alarm:2 G-code motion target exceeds machine travel. Machine position safely retained. Alarm may be unlocked. Right click the devices button to reset the connection. On or near line 3. I am a new laser user. I have no idea what to do other than cry. Please help me.
😢 Press the reset button Treva or just turn it off and then on again. You're probably moving it by hand, so the machine thinks it's in some other position.
ami me sale haci no podido solucionar
ALARM:8
Error en el ciclo de autoguiado. El ciclo no pudo borrar el interruptor de límite al arrancar. Intente aumentar la configuración de extracción o verifique el cableado.
ok
Ortur Laser Master 2 Ready!
OLF 142.
Grbl 1.1h ['$' for help]
[MSG:Check Limits]
[MSG:'$H'|'$X' to unlock]
[MSG:Caution: Unlocked]
ok
I’m getting error:9 and error:1. Can you help me?
If the video doesn't help, I can't diagnose your problem in a text Manuela.
My $110 is 18,000 and my $111 is 6000 which of these do I choose for speed?
18000. The X is 18K and the Y is 6K. This is very common, and the laser will default to the 6K when it moves up, which is more than enough. Just remember you can't change the scan angle in the layers to 90° in the Cuts / Layers and expect it to go fast.
@@TheLouisianaHobbyGuy it doesn’t let me put 18,000 in the white space box under basic settings. It only goes to 4 decimal places. I am using inches/minute as my setting.
Well, change it to mm/min, enter that number and then change it back!
Error code 1 on my olm3 any suggestions
Yeah, that's why I made the video Marty!
My error code was about unrecognizable gcode or unrecognizable letters in gcode and Bluetooth SD card disconnect error
You can open a ticket on Ortur's tech support. They are very good with support: ortur.tech/support/
@The Louisiana Hobby Guy I also appreciate your response as tech support has not contacted me since my initial report and I'm stuck in limbo
How about error 8 ....Grbl needs to be on Idle?
Probably a bad power supply and the board is "browning out". Try running a job at 10% power, if it works, it's a bad power supply. If not, it could be electrical interference from the wiring or a bad ground, or a bad USB cable.
Thanks
"Error 8: Grlb '$' command cannot be used unless Grlb is IDLE. Ensure smooth operation during job". ....this is the exact message ...at the moment it does not even allow me to connect to my Ortur Master 3.
My fault...emergency button was on.
keeps hitting frame when hitting home button
Use absolute coordinates. Turn off the laser, move it by hand to the Home position, turn it back on and switch to AC.
This is not help about error 9
It's helped a lot of other people! Glad you didn't have to pay for it!