Aufero Laser Alarm Lock on Startup Fix
HTML-код
- Опубликовано: 25 фев 2022
- If you have an Aufero Laser and it starts up in alarm, requiring you to unlock it, here is both the method to clear the alarm and eliminate it altogether from startup. shown in both Laser GRBL and Lightburn.
Links to items used: (Disclosure: I do receive a small commission if you purchase any of these items. This does not increase your cost)
Aufero Laser 2: s.zbanx.com/r/7sqmC3Bc0M94 Хобби
Glad I watched all your Aufero Laser 2 videos before I even turned it on.
You saved my sanity with my new laser! Thank You!
Thanks for taking the time to make this. I couldn't work out why it was doing this, solved now :)
Thanks so much Roger. Quick and to the point.
Dziękuję za bardzo dobry poradnik, zrobiłem tak i już nie mam problemu. Męczyłem się z tym problemem 10 miesięcy. Jeszcze raz bardzo dziękuje i życzę powodzenia. Jestem z Polski.
Hi Robert! You saved my day. I was looking for the problem why my aufero just shows error 9 in Lightburn and finally „$x“ solved everything. Thanks for your video-support!
Great fix! Thanks so much.
Thanks Roger, it worked!
Awesome...love your videos and ty so much!
Thank you for excelent job
Very handy tip
Gracias!!
my friend, I did the same as you explained but it didn't work it keeps blinking
Yes I know
Roger I have a question new subscriber by the way I love your content. I have the ortur Master 2pro 2 the one that has the flame sensor upfront next to the red off button flame sensor just goes off constantly interrupting my work is there anyway to disable that. I have tried everything covering it making sure didn’t have too much light running a fan nothing seems to work any ideas thank you in advance.
I also have that laser and only have the issue if the sun hits it. Most lasers with flame detect have an adjustment potentiometer on the motherboard to adjust sensitivity.
What do you need to know?
hola amigo, ahora que estamos en la version 5.4.0 ya no encontramos el valor como lo tienes en este video, puedes ayudarme, habia solucionado con este video, pero se me actualizo la version y necesito hacerlo de nuevo, la opcion $64 ya no es la misma. gracias
Sorry, I no longer have this laser.
I am new at this, so not sure exactly what you're looking for
Hi, am just using phone and laser explorer app, and I cannot remove alarm, L m 3, any tips
This needs to be done in either Laser GRBL or Lightburn.
Since you have the same kind of printer a aufero laser to I would like I would like it if you could give me some help on it having problems with where it stops been playing around with it for a while still having problems but if you can give me an idea and contact where I can contact you better
I no longer have this particular laser as I gave it to one of my Grandsons a while back. What settings are you using in Lightburn? Since this laser does not have limit switches, it cannot "home".
is there a way to add a home button?
No. Not on this laser as it does not have limit switches, so it would not know when to stop.