Which Glacier Bay Cartridge Do I Have?
HTML-код
- Опубликовано: 22 сен 2020
- Which Glacier Bay Cartridge Do I Have?
Private label branded faucets like Glacier Bay, Aqua Source, Pegasus, Jacuzzi, Premier, Homepointe, Baypointe, and Proplus are become so common these days. The problem is there could be dozens of different faucet cartridges inside these faucets. Let us help you identify what you have.
#GlacierBay
#AquaSource
#FaucetHelp
@PlumbingPartsPro
Email: info@plumbingpartspro.com
Instagram @Plumbing_parts
Twitter @Plumbing_parts
Website www.plumbingpartspro.com
**********EQUIPMENT USED TO FILM**********
CAMERA amzn.to/33IR7Au
LIGHTING amzn.to/2q6B8hc
TRIPOD amzn.to/34TU4ON
MICROPHONE amzn.to/2NDXbVn
LIGHT STAND amzn.to/33GHwdH
We Stock What Others Consider Special Order! 
Хобби
Dude! You are a rockstar! As a homeowner I' confused, as a pro you gotta be pissed off to no end! Thank You!
In the video you mentioned that you would have a link in the description for each numbered cartridge. I don't see those links. Could you post them please? Thanks!
It's obvious you enjoy sharing this technical information. I'm not in the market for cartridges, but I know where to go when I am. Thank you!
Great video and details. Very helpful.
I need the part number for the extension for your glacier Bay cartridge 10321
Thank you so much for helping me identify which cartridge I have as there was no name on it and I had great difficulty finding one. Turns out I had the exact same one you called premier.
Great info. Thanks
Number 4 is a Danze as he mentioned. That specific one is DAN-A507902 There is a longer version that has the same long square brass rod the DAN-A507975
Great demo
Thanks you sir
And believe it or not mine is still different. Mine is similar to #3, but is much longer. Danze single shower handle. My goal is to replace the handle with a new black handle without replacing the valve, but seems this cartridge is very hard to find handles that work with it? Curious if I can change the cartridge for the one that comes with a new shower handle and of course leaving the valve alone? Help & extra links appreciated!
Thank You!
These are hot+cold mixing shower cartridges. (The sink cartridges are confusing too: hot OR cold (not interchangeable) and lengths vary.)
I'm helping a relative that that already retiled her shower and now needs a matt black trim kit to fit her existing valve. I haven't removed the cartridge but it appears to be either number 4 or number 5. My question is; do you carry trim kits that will fit that long square stem type valve?
I just replaced one of my cartridges in my dual handle shower and now my water won’t cut off. What did I do wrong? Are the springs necessary? I noticed one of mine were missing out of the pack. If the spring wasn’t installed could that be the issue?
I have cartridge #1 but how do you get the inner portion of the cartridge out since it is two pieces? The inner portion is stuck and I am worried to damage the housing getting it out.
The cartridge I am trying to replace looks like the 10321 Danco BUT ours has two + instead of 2 Os on the back... (by blue 3-part seal).
Does that make it a different model?
@13:15 does this cartridge replace Pegasus874-5196H the spline is short also
May I get more info on the GB #10 asap please??? Can't find the link you mentioned in the video. Thanks
Hi, really struggling with trying to figure out what's up with my shower. I have an old school set up by Glacier Bay (I think). One handle controls temperature only, and the other controls flow. Haven't ever seen this setup anywhere else. It's kinda cool cause once you have the temp valve where you like it you rarely have to adjust it. Anyhow the old temp cartridge was never working right, so took the faucet apart and replaced with what physically is an exact match provided by local awesome plumbing supply house. Cartridge is a Glacier Bay PB0990 "Single Lever". Fits perfect and matches the old one perfectly, although the chrome dress up plate that surrounds the handle says Pegasus? Anyhow with new one installed (pins only allow one way to install everything, so I believe it's aligned properly) the cold (if set to all cold) will only run for a sec, then piston slides and shuts off 99.9% of flow. Same scenario if set to only hot. Only way I get normal water flow is if I set temp valve to the middle allowing equal hot and cold. Doesn't make any since?? Almost acts like I have the cartridge in ass backwards, but quite sure I have it correct... the two round spring loaded rubber seals ride against the handle, and the two "D" shaped ports surrounded by one race track shaped o-ring rides against the incoming water port holes inside the main valve body. Just figured I'd post all this since others may be having similar issue. I can't seem to find any info on this type of setup. Thanks!
Actually, I think I figure it out and it's working exactly like it's supposed to, just a really dumb design. Turns out I am getting temperature adjustment (now that hot water finally kicked in which takes forever), the valve just cuts off the water for some reason if set all the way clockwise (cold) or all the way counterclockwise (hot). What the heck is the point of that if there is a separate valve for ON, OFF, Flow? Dumb. Anyhow it works I guess ... probably way they don't make this setup very commonly anymore.
Can you help me determine what aqua source cartridge I need?
I have a flow faucet can I replace it with glacier. Does it fits.
Do you know the part number for the stops on the glacier bay shower that cartridge number 6 goes into
How do you adj. the temperature on glacier bay #1
Good morning I need the part number for your number 8 cartridge for your Glacier Bay extension for the handle
is project source bath+tub faucet cartridge is compatible with glacier bay?
I have a glacier bay shower valve, and takes a RP20075 cartridge, which looks like the Danco 10321 will fit. The question I have when I watched your video is the cylinder in the cartridge you were showing I could hear you shaking it. Is this what the piston is to do? I noticed when I removed my cartridge the piston that you can see in the back of the cartridge where the slots are at does not move at all; and this is a new cartridge about 4 months old. Is the piston suppose to be that free to move around? If so, then I guess I got a bad cartridge, as I can't get enough hot water to flow or balance between hot and cold. Your thoughts?
It does sound like the pressure balance section of the cartridge is not working properly if your not getting a good mixture.
@@PlumbingPartsPro Thanks, tried an experiment, used a small hammer to tap side of cartridge to see if the cylinder would move, and sure enough it would move back and forth, but not very freely. Extended the experiment by a placing a drop of olive oil in the chamber, and tapped again. Seem more freer, but it would not shake back and forth. Put together, adjustment got better. So I have a new cartridge coming on Sunday to see if the cylinder is free in movement to see if this corrects the pressure balance. Thanks for having this video, this really helped when others did not.
How can you adjust the hot water in cartridge #1?
I am trying so hard to do this project myself. I bought this house in the guest bathroom there is a delta monitor shower set, Before I start pulling apart everything can it be changed out to a glacier bay Oswell tub and shower kit?
No you can not mic match bands without changing the piping in the wall. Delta offers some trim kits that will work with some existing faucets. I would not recommend a Glacier bay as it's difficult to find parts
What is #3 please?
Great video, can you help me identify this cartridge
Where can I get sleeve and bonnet nut for RP200006 cartridge for Aqua-source faucet model no 0071412.
On number 10 how do you change the other cart that number 10 goes to
The problem I have is that the collar holding in the cartridge is different (both Glacier bay) threads are different
Stopping bathroom sink drip. Dual Handle. Contractor special faucet; no name. Bought Danco 3S-9H/C specifically noted for Hot/Cold. Installed and it stopped the drip but now must find 'center' for it to turn completely off. Is there a way to put a stop on that cartridge? I've searched high and low and not been able to find the same cartridge in single Hot or single Cold? Help please???
So the stop is a combination of the plastic extended piece where the handle fits and a similar piece in the handle that mate to each other to stop. Your original stem must have had the stop built into the stem. The only way to fix is to replace handles or get correct stem. Email me a picture of the original stem. Info@plumbingpartspro.com I may have it
My Pegasus life style shower faucet has the exact same cartridge. It’s made by danco I believe
Its an import part that is distributed by several companies. Danco happens to be one of the larger distributors
Plumbing Parts Pro ah I see. The part does not last long and I’ve had to replace it every year because the pressure balance would get stuck and I would only get hot water 😒
@@mirelurk-fish7387 1 year isn't very long thats not cool. Thanks for watching
@@PlumbingPartsPro I need the extension for danco cartridge 10321 I have been unable to use my shower for over a year now finally got the handle and cartridge but I need an extension
If the cartridge is labeled HL-40. Will any HL-40 cartridge fit?
WOW!!! All those and not the ones I have....
Email us a picture info@plumbingpartspro.com
I have #6 what model is it? It's a Glacier Bay
What if you don’t know if it was already replaced improperly? Do you replace the whole thing?
This is the same problem am having.
Glacier nightmare
I have the AiHom or Homelody shower head and hand hose. Any info on that? CZ448608PBKUS
HI how are.
please I have one question I have old cartridge USPAT 6131600, and I don't wish shower faucet is this, please if you can help me with that .
thank you
Email us a picture info@plumbingpartspro.com
Link for cart #1?
Got a Grohe shower and the handle broke and i cant find a replacement parts. Hard to find part numbers so damn frustrating almost like its meant to replace the whole system smfh
Send us a picture of the faucet info@plumbingpartspro.com
I reinstalled my cartridge and now it turns off in the middle with hot turning one way and cold the other. How do I fix this?
Which cartridge do you have
I believe I can use #9 can you assist. I have forwarded you emails with pictures
Where can I find an extension for danco 10321 shower cartridge. What model number is it? I can't find it anywhere
They are different, and hard to find. What handle broach does that handle have?
@@PlumbingPartsPro that's all I have. The previous owner superglued the handle its stuck and broke off with the handle
I'm working with a new cartridge with no other Info. Any options or point to the right direction would be greatly helpful
So you need the extension, handle, and the flanges?
@Plumbing pro parts. Where can I find the make and model of the spline extension @4:40
Is there a two minute video on how to find your exact cartridge?
I bought blue ocean shower panel SPS 8879 from Amazon plz tell me where I can buy its cartridge
You will have to remove the cartridge and send us a picture. Most of those Amazon shower panel faucets are imports and difficult to find parts. If we see the part we may be able to find something for it.
@@PlumbingPartsPro pls let me know ur email so I can send you the pictures
Please help me! My stem extension for number 8 broke and I need a replacement where can I buy one please let me know I can’t find it anymore
Thanks for watching. Send us a picture of the extension. That one takes multiple options for extensions. In order for the handle to fit correctly we need to know this. Info@plumbingpartspro.com
@@PlumbingPartsPro is that your email?
Info@plumbingpartspro.com
@@PlumbingPartsPro I sent an email this afternoon. I bought the shower in 2010
😊
I have 825 pull out kitchen faucet
Can you please send me video
you sell glacier cartridges?
Is there a catalogue with all these odd cartridges?
I do not offer one. Our website shows some. If you need help email is info@plumbingpartspro.com
I have 825 glacier bay
U didn't link them. I need #9.
grreat video if you stop putting the parts to close to the camera ..they are out of focus...lol...but over all great video
What about a millenium brass
Trying to adjust to hot
Im a plumber and these cheap cartridges suck. Not to mention theire a PITA to track down
Huge thumbs down for not linking to the cartridges like you said you would. Wasted 30 minutes to realize that smh.
Thanks for watching. We apologize for that. Let us know which one you need and we can help. Info@plumbingpartspro.com
Here's an idea - when you advertise this as 'which glacier bay cartridge do I have,' get to the point and don't go on and on about all sorts of other products. If you want to do that, then say you're doing it
Glacier bay makes lots of cartridges. Did you see the one you needed?
project source -Part # A507190