Complete Subaru EJ25 Engine Block Rebuild/ Assembly - Many Subaru Models
HTML-код
- Опубликовано: 5 сен 2024
- In this video I show how to rebuild from split block all the way to intake manifold install. There are many slight variations of this engine but basically they are all the same.
❗️If you find this video helpful, I would appreciate donation to the channel or a $uper Thanks that can be found below the video.
Subaru FB 2.0/ 2.5L Block Split / Crankshaft Removal
• Subaru FB 2.0/ 2.5L Bl...
How To Remove Pistons From Subaru Cylinder Block EJ25
• How To Remove Pistons ...
💰 Save money on Subaru repairs:
Subaru Engine / Rod Knock Vs Piston Slap
• Subaru Engine / Rod Kn...
Serpentine Belt Replacement And Routing Diagram on Subaru
• Serpentine Belt / Driv...
Radiator Replacement Subaru Forester, Impreza, Outback, Crosstrek, Legacy
• Radiator Replacement ...
Thermostat Replacement On Subaru Forester, Impreza, Outback, Crosstrek, Legacy
• Thermostat Replacement...
Rear Tail Light Assembly Replacement On Subaru Forester 2009- 2018
• Rear Tail Light Assemb...
Rear Bumper Replacement On Subaru Forester 2009-2018
• Rear Bumper Replacemen...
Complete Subaru Engine 2.5L Removal - Any Year - Step-By-Step
• Complete Subaru FB Eng...
Subaru 2.5 L Engine Teardown - Head & Timing Cover Removal - 2010 & Up
• Subaru FB 2.5 L Engine...
Cylinder Head Install On Subaru FB FA 2.5L Engine 2011 & Up - Tricky Torque Procedure
• Cylinder Head Install ...
Valve Timing Set up With Marks On Subaru 2.5 FB FA Engine
• Valve Timing Set up Wi...
Rear Wheel Hub Bearing Replacement On Subaru Forester, Outback, Legacy, Impreza & Crosstrek 2010-14
• Rear Wheel Hub Bearing...
Rear ABS Wheel Speed Sensor Replacement - Subaru Forester, Crosstrek 2009-2018
• Rear ABS Wheel Speed S...
💰Save money on other vehicle maintenance and repairs :
Top 3 Reasons Why Your Car Won’t Start
• Top 3 Reasons Why Your...
Pittsburg Harbor Freight Engine Support Bar 1000lb. Capacity - Review& Install
• Pittsburg Harbor Freig...
How To Remove A VERY Stripped Lug Nut - When All Tools Failed - Guaranteed
• How To Remove A VERY S...
Cheap Way To Check For Bent Valves Without Removing Cylinder Head
• Cheap Way To Check For...
Brake Burning Smell? - Frozen Brake Caliper Replacement on Any Car
• Brake Burning Smell? -...
Brakes Dragging? And Not a Frozen Caliper?
• Brakes Still Dragging...
Save money and learn how to bleed brakes by yourself on any car
• Save Money And Learn H...
Why Does My Car Battery Die So Fast
• Why Does My Car Batter...
How to properly gap spark plugs
• Car Misfiring? Running...
Proper way to install valve stem seals
• Proper Way to Install ...
Hot Tip: Broken Stud Removal
• Hot Tip: Use a Torch f...
Remove a Broken Stud Below the Surface
• Remove a Broken Stud B...
Oil Bearing Clearance measuring - simple to understand video
• Oil Bearing Clearance ...
Symptoms Of A Seized / Locked Engine - How To Tell It’s Not A Bad Starter
• Symptoms Of A Seized /...
How to properly gap and install piston rings
• Piston Rings Replaceme...
How to check cylinder head or block deck for warpage
• Cylinder Head Warpage ...
Why is it important to replace the timing belt at the manufacture’s intervals
• Check and Change Your ...
Fast & Easy way to lap “grind” intake and exhaust valves
• Seating Intake & Exhau...
Replace Front Exhaust Flex Pipe on most 4 or 6 cylinder cars - Cheap Way
• Replace Front Exhaust ...
Better Throttle Response in Minutes
• Better Throttle Respon...
⁉️QUESTIONS
If you have any questions or I missed something, comment below and I’ll answer and try to help you out
If you find this video helpful, like it and subscribe to my new channel. I’ll have tons of videos on all kinds of car and truck repairs in the
future.
#motorcarnut
⚠️Disclaimer:
The videos on Motorcarnut channel are posted with informational purpose only.
Information posted in this video does not guarantee any particular result. Use this information provided in the video with caution and at your own risk. It is the responsibility of the viewer to take this risk.
Motorcarnut is not responsible or liable for property damage, any loss damage, or injury related to or resulted from information posted in this video.
Mann, you break down how to put this ej25 back together. I love it. I'm getting all my parts for my ej22, and once I do, I'll be doing my rebuild. I'm want new rods, pistons, everything new. I dont want any issuesfor awhile. I'm excited to rebuild my subaru engine.
Thank you! Appreciate that. And if you get stuck just shout out! Good luck!
Dude, I am doing this engine for the first time in my life. I have gotten the engine all the way down to splitting it, but am feeling a bit intimidated by it all. Everything's going okay so far. You make it look so easy, and hopefully this video will get me up and running. I am planning on putting the original pistons in from the cylinders they came out of. Question... I did not set the timing before i disassembled the engine. Shouldn't I be able to turn everything to the timing marks, or as close as possible before head install?
Yes, that’s fine. If you get stuck give me a holler. Good luck
@@Motorcarnut Adjusted valve lash off engine when the cams were tenstion free, and just used some zip ties etc on the cam wheels to hold the belt and aligned marks. Put engine back in and runs great.
@greatheathen Good, that’s for that tip maybe can help others!
I have a problem the bolts you said it’s 37lbs I put it before 20nm and it broke already they always breaking with me and I don’t know what to do anymore and what I’m doing wrong I have ej25
The long bolts are 37 ft Ibs the top short ones are 22 ft lbs
Seems difficult but it's very difficult 😊
Not as bad as it looks, depending on your skill level.
👍🏻🍺
Thank you!