VERY RUSTY MINI - Butt Welding Handcrafted Panels
HTML-код
- Опубликовано: 27 авг 2024
- In this video we butt weld the handcrafted panels we made in the previous video.
Please subscribe and leave a like if you enjoyed the content & comment your thoughts down below. It really helps us out!
Check us out on Instagram - / con. .
Check us out on Facebook - / yorkshirecar. .
Check us out on TikTok - / yorkshirecarr. .
Check out The first part in the series where we show you how it all started!:
• Introducing our Barn F...
Check out our Disaster Datsun 260z restoration series!:
• Abandoned Datsun 260z ...
Check out our other how to and rusteration videos:
Mk2 MX5 Rusteration:
• Can we Fix the Rusties...
MX5 How-To videos:
• How to Remove a Mazda ...
Check out the little classic mini restoration!:
www.youtube.co....
Check out our MX5 V6 Conversion!:
www.youtube.co....
We also have much more content on our playlists as well as big plans for the future!
Music
-
Music: Feel by Limujii is licensed under a Creative Commons License.
creativecommon....
Support by RFM - NCM: bit.ly/3J4vwKg
-
-
Music: Reflection [Original Mix] by Imperss is licensed under a Creative Commons License.
creativecommon....
Support by RFM - NCM: bit.ly/3GpI9wH
-
-
Music: Chill With Me [Original Mix] by Aftertune is licensed under a Creative Commons License.
creativecommon....
Spotify: sptfy.com/afte...
Apple Music: apple.co/35RcvHF
Support by RFM - NCM: bit.ly/3GvKJCC
-
Excellent- I have some quite bad rust patches on my mini and needs some work but thankfully I have a gasless mig welder and this video to help me in the summer- thank you very much for the superb video
Many thanks for including some quick notes at the bottom on what you're spraying and what you're doing! For instance, I didn't even realize "Weld through" primer is a type of primer I should be looking for if I am going to be welding on it. For me as the viewer, little details like make the video not only a satisfying compilation of hard work, but also a realistic and approachable tutorial I could follow. Again it's a little detail but I wanted to point it out so that you know some of us appreciate it and find it helpful!
Thank you, we are trying to add more and more content and more explanation of what we are doing to help uther understand the process :)
Wish i still had my TR7 feel like I could learn so much watching you and definitely have the confidence to tackle the rust on it just makes you realise you don’t need to buy expensive bad fitting panels
Well look at you lot all swish in your leak free garage 👍 you deserve the upgrade gang ! keep up the good work.
Thank you Khyron it's m ch appreciated :)
Your workshop is huge!!
It is, gives us more space to play :)
@@yorkshirecarrestoration Any chance I can store two Land Rovers in the corner, they are going to br finished this year, honest.
It just occurred to me that the Mini is almost as old as old as me , and in all that time how many people have worked on these little rot boxes patching up the many holes but not many of theme did it as well as you do - excellent work
Thank you Colin :)
Don't worry, I was born 2 days after the mini was launched 🙂 Love em
Lots of effort there, a new a panel even a pattern one for £25 would have save a fair bit of time
Hi :) our channel isnt about saving time or selling our services, its about Fabricating an repairing things yourself, the metal i used cost about £7 and i repaired 3 sections with it so a lot cheaper than 3 new pattern panels , we are showing the work and how to do it so it can be done to any car , maybe even a car that the panels are a fortune or even not obtainable :) thank you for your comment :)
Quality work as usual . Well done , learning lots from the channel some of which I have put into practice on my old bmw !
Thank you David, showing others how to work on cars is what we are all about so we are made up our videos are helping :)
I thought it was groundededed. Lol. You got to make you a mobile table on wheels. Put your mig in it. Hooks for helmet. Bodywork tools. Sand paper. Hammers. Maybe even a shear. 4x8 rolling tool shack table. Push it out the way when done. Time is money But nice shop. 👌 I would need some wheel blocks. Raise that sucker up. Great bit of patchwork. It lives a little longer. Good luck
Thank you yes we do have some welding trolies that we are getting and going to equippe them but it takes money and we do this on a tight budget :)
VERY GOOD BUT IT,S THAT ROTTON I DO,NT THINK YOUR TAKING ENOUGH METAL OFF AND IN NO TIME THE RUST WILL BACK THROW
Thank you Jason, it wont as long as everything is neutralised and protected after the work is done , iv been doing this for over 25 years and i see a lot of my old restored cars years later with no issues, its tried and tested :)
Great work Steve on the little mini less rust on that than some Mx5’s 😂keep up the good work
Your not kidding lol speaking from experience Mazdas rot something crazy 😬
Thank you Lee :)
Fab job !!
Thank you Chris :)
سلام خوبی خسته نباشی عزیزم من هم یک مینی ماینر کوپر اس دارم در تهران ایران خیلی خوشحالم شما رو دنبال میکنم
Wow. Amazing work. Great to watch. Thanks
thank you Stuart :)
Nice job fabricating and welding👍
Thank you Curt :)
Some of the best panel fabrication and MIG welding that you'll see on the internet.
Thank you very much :)
Great work as always.
Thank you George :)
Good welding Job !!
Thank you Jonny. :)
A proper mini 🙂🙂
it is :)
What better way to showcase the new shop, than by working on a Mina! To me, alongside a Moggie and a BSA , HRD/ Norton or AJS motorcycle, they are the most iconic and recognised British cars. Great work as usual and love the series. Would these patch repairs be prior to the British MOT inspection?
Thank you Brian , good choice of cars, yes it will also9 be MOT tested :)
Hey, it's looking nice in there chaps! No more dripping ceilings and plenty of space, we're all jealous. :)
Yes no more kneeling or laying in puddles haha
Great job 👍, but A panels aren't that much may have been easier to grab A panel and weld it in
Hi john , yep they are cheap but we are all about doing it ourselves with sheet metal, its more fun :)
@@yorkshirecarrestoration we have a good welder at my work but I get the impression he doesn't like doing minis or doesn't want to do mine slightly cheaper for me, I used to be pretty good myself but I'm half blind in one eye after a snap on tool snapped in my face, should drag my mini out before the MG Metro turbo seizes up completely 🤔 a garage would be nice though 🤣
Nice repair on that Mini😎👍
Thabk you :)
Great one. I am in the mids of fixing bottom front fenders of mt mx5 nbfl.. u know the place.
Yes we know the place well :) take your time and enjoy it :) 👍
@@yorkshirecarrestoration thx.. i am sure it will be better then before, and any uneven spots will be covered by underseal/stonechip ;)
You make it look so easy proper job right there 👍❤️🇬🇧
Thank you Richard :)
Nice work so far….ways to go but you guys are the best! 👍
Thank you Mark :)
Artistic.
Steve, you usual magic tin bashing back again in the new shed! Wonderful!
Thank you Eddie its support like yours that keeps us making videos to help others :)
Nice work on the a-panel! that bit right at the end on the rear arch, the seam cover has been left on, they have a small section of steel U shaped that pops over the two meeting flanges. I think you've created another flange on top of this finisher piece.
Hi Dave , yes you are correct , i did forget to remove it before welding but done now and metal tapped down nicely thank you :)
What happened work shop looks empty, have done a few minis, am aware of many replacements , did you forget to take off the steel that covers the lip between rear light and wheel arch , didn't realise how long ago this was
Great work. You do make it look easy sometimes 🤣. Looking forward to next instalment 👍👍
Thank you Dean :)
Biggest workshop ever
Thanks!
thank you Eddie, Likes like these mean a lot to us all :)
outstanding mig showcase, have to ask what was wire thickness and gas used? Any plans for rx-7 fds that were seen in background often?
Thank you. Wire is 0.8 and the rx7's are destined for restoration. :)
Lovely Jubbly video, great skills to have and use. Would it not be more economical to replace the whole quarter wing in labour and time than to cut and repair the panels which can be done easier.
I don’t think it’s easier to replace a rear quarter than to patch. Mainly, I would guess, the car’s corrosion doesn’t yet warrant the full panel replacement.
I'd of just slapped two new A panels on it, save fucking about fella.
But anyone can slap a new panel on. We are different. :)
These are great videos to watch but it seems to me it would be worth the money to have some kind of lift to elevate the cars to a comfortable level rather than working on them from the hard, cold concrete floor.
thats the idea :) but we have to save up first as they aren't cheap :)
Brilliant. Make it look far too easy. 👌👍
Grinded? Is that a word, It is now.
We shall enter it onto the YRC dictionary of alternative words :0
Well what can we say😂😂😂😂😂😂😂
thank you for watching.
Forget about Minis, You have place enough now to start the rusteration of a double decker bus. 😉
we may do one of them Leo :D
is it cold in that garage lad? can see your breath!
Biscone on your gloves?
probably more like biscuits :)
Good work
thank you :)
Well done you for helping some poor misdirected person. Fixing up their old Mini so that they can perhaps sell it for something that doesn’t keep loosing them their fillings. You can tell I’m a fan, right?
Haha. Yes Tom and we do appreciate the encouragement :)
Steve, is there more to come on the Mini, or did you put your video energies elsewhere?
Love seeing you work on these cars!
Cheers, Mike
had to stop the video after 1 min.. what was that word again . grindeded?
Its should be added into the dictionary :)
Hi Steve that’s good welding you make it look easy, can you get the same results with a flux core machine? As l suggested to Ryan stop kneeling on cold concrete floors you’ll suffer later only thinking of you guys , excellent bodywork & fabrication skills 👍
Hi Linda :) thank you, Iv never used flux core so I wouldn't honestly know but I have seen it used successfully :)
To make as clean a job, flux cored wire needs more skill. If you were underneath the car and the repair is away from peoples vision then OKs. If the repair is seen then the argon mix shield makes it easier to do a cleaner weld. Some mig welders will allow the fitting of the gas gear which will add say £120 to buy a bottle plus the first fill and a regulator. Some MIg welders are pure gasless and you cannot convert them to allow the gas bits.
@@drumtochtyglen would it make much difference flux core or gas as it was ground off anyway.
@@royster3345 The few cars I have seen that were welded with a "Gasless MIG" after you as you say " you have ground then down", the welds did not get a smooth surface as there was areas that did not get a similar thickness of weld laid down. My welding efforts with Argon mix are less than wonderful, and I need all the help that I can get, That is why I say it is OK for unseen areas. I friend who had a gasless MIG for many years, for his 65th birthday I got him a Clarke 151 and all the gas kit. He loves it for inside the shed welding. Now if you are welding outside on a day with some wind a gas MIG you in reality are back with a gasless outfit as the Argon is blown away.
@@drumtochtyglen Thanks for the feedback. I'm currently on a welding course for DIY purposes, oxy done, currently at TIG stage, MIG to follow, with gas, keen to try after that gasless.
Great video. Thanks for making them. I'm restoring a mini currently so was useful to see how to do some of it. Out of interest do you use 0.6 or 0.8mm wire?
Hi Jonathan. Glad tour enjoying the videos. We use 0.8 wire :)
Rotten as a peach but hey ho crack on lads…
thank you we will :)
Got a question for a change gang if I wanted to buy replacement body panels for a 17 year old Mazda 6 (which I do) other than Mazda who would be the best people to speak to ?
ebay
Yep eBay has all the traders on so you will find anyone who sells them on there :)
Good skills but it would have been quicker and cheaper to get a decent quality repair panel
No wonder. There’s Minis out there with patches all over I wouldn’t want to buy it ?
How can you forget to remove the horizontal finisher strip on the rear wheel arch? Not a fan of that work, that is not professional.
Yes I did forget but thank you for your input :)
Grinded?? Should be ground down! Minis and others like to ROT!!!! 😡😠
y brain forgets to think sometimes , luckily my fabrication is ok :)
The A panel has a wrap around closer to the a-post…can’t fault your fabrication, but you must admit that minis rust beyond that which is visible. I’d guarantee the top of that a panel to scuttle is rusty…as for the rear quarter and lower valance…tell me this mini is just a test bed for your skills.
nope not a test bed, just repairing what the customer requested and can afford as a full restoration would be out of his budget :)
I have to ask, why are you using rusty metal to patch this already rusty Mini?
It's only a bit of surface tarnishing nothing to worry yourself about. :)
Hello lads, I've got an FD RX-7 that I absolutely hate, and it looks like you've got a love hate relationship with them also, you guys are a working shop I assume and im in Yorkshire and would be hoping to have you guys take a Look at the car someday, do you have business contact details?
Hi John, yes i have a passion for rotarys , i have a few myself and we do everything from turbo conversions, engine rebuild to full restoration :) you can contact us through email @ Steve@yorkshire-car-restoratrion.co.uk :)
@@yorkshirecarrestoration Thanks very much! Im glad to hear, i'll be in touch once i've finished up my Impreza, the RX-7 is next on the chopping block
Enjoying the videos, but why did you noy just make the repair section a little bigger to include the rusty hole you welded up!! plus on ther rear wheel arch you did not seam to spot the returned new section to the inner wing lip ??
My welding is laughable in comparison. I only weld places no one can see
Keep practicing it will get better :)
Good workmanship
Thanks a lot for making these. Your techniques give me confidence on continuing to repair my 240z. Also what was the tool you used to grind down the welds @17:45?
Glad your enjoying them :) that was a die grinder to get in the tight spots :)
@@yorkshirecarrestoration was the attachment just a metal carbide but? Thanks.