Its really hard to choose a modeler when there are so many and you can't just go to a store and try them out for hours. Your videos are a must watch. Thank you Leo!!!
Thank You Leo for another great video. I received my Ampero Stomp yesterday and so far it has been great. Your example of the signal chain is easy to follow. I hope to use it live this next week in our Worship Band.
Hi leo. I like the professionalism with which you always make your videos. A deserved like and account with my subscription. I do not speak English, but I hope you understood. Greetings from Colombia!
Really powerful and good sounding product. Very interesting demo song as usual. Sparked my creativity and now I'm trying to replicate your tone on my POD Go. It's a great time to be a guitarist. God bless and rock on 👍😎🎸
Cool, I'm happy for this...it's kind of a strange song...I'm happy that you have found it interesting....and I think that the only problem you will have with the POD GO is it's missing possibility to have parallel effects ad therefore parallel delays. Thank you!
You are welcome! Yes, I do agree....there are amazing units in the market, with a lot of possibilities... Thank you for your message and I'm happy that you like the video!
Thanks a lot for this video Leo!!!! Is very explicit and really is a great help to understand the multiples signal chains of the Ampero II ;). Best Regards
Great video as always ! The Stomp 2 seems quite underpowered i must say since you were able to hit the dsp limit with just 7 blocks that seemed to be a pretty standard chain and nothing excessive.
Hi Stefan, thank you for sharing. I would only add that this is the first iteration of the sw and fw, therefore maybe they need to tweak and optimise the algorithms ... Thank you!
Thank you Leo. Another very useful educational video. I just received the unit couple of days ago. I found the amp sounds excellent and cabs also excellent. They seem to take less DSP then IR so can easily use 2 amps 2 cabs. If you place CAB at the end of the chain you can split and send one output to PA with the CAB and the other prior to split to power amp with guitar speakers. This is my first Ampero product. Do you think, the amp and cab sounds are significantly improved from the old?
Hi, thank you! My first impression is that the amp sound is very similar but the cab section has improved...but I have to do a direct comparison video to be able to answer properly. Thank you once more!
Complimenti bellissimo il brano iniziale,mi sono appena iscritto ,penso un che passerò i prossimi giorni guardando i video presenti nel canale,il suono bello molto interessante la flessibilità sulla catena effetti , volevo prendere hx stomp ma vedendo questo ampero credo che aspetterò ,devo valutarlo bene, ciao 😄😄😄
Grazie mille!!! Mi fa molto piacere che ti sia piaciuta la music a la tua iscrizione significa molto per me!!! Se ti piace la musica, mi permetto di segnalarti questa playlist di miei brani: ruclips.net/p/PL5d6_Yq6oCrwnnNHTA0KoVX-H6L1Jo134 Grazie ancora!!!
Thx for the good video. There should be more videos like this one showing what the limitations of certain devices are. Just reading the numbers (XY effects, EY effects simultaneously, etc.) can be misleading.
Thank you Stevo, I'm super happy that you like the video!!! I've asked and they told me that they will include scene / snapshot....but I don't know when and if they actually will.... Thanks!
Hi Pier Francesco, yes, I will do other comparison videos...so far, if you want, you can check out some comparisons with real amps in the Ampero 2 review video and in the comparison with the HX Stomp and the GT 1k core. Thank you!
Hi, thank you! Not yet. They told me that it should be added with future firmware upgrade...but so far snapshots or scenes are not available.. Thank you!
Leo congrats. You put the most valuable videos of the gear on youtube! I am little bit confused of DSP capacity of this unit. What if I would like to combine chain which have 2 amps, 2 cabs, 2 reverbs, 2 delays? Is it possible or not? I really wanted to buy BOSS 1000 CORE but your videos about Ampero made me thinking!
Hi Mike, there are two considerations: 1) the firmware and the software are in their infancy....so the algorithms could be optimized in future firmware upgrades allowing us to use more effects blocks 2) the amp and the cab are pretty taxing the DSP and therefore if you use two amps you are limited in terms of other effects you can put. For sure the GT 1000 core allows you to put more amp and effects in the chain. Thank you!
Hello Leo, your demo videos are very instructional. Thank you very much. I ask whether the following set is possible: Two guitars (one electric and one acoustic) into the two inputs, then two separate chains with different effects and amps - > at the end a mix of both chains - that's an A/B-Y set, ok. But my question is, would it be possible to send this A/B-Y-mix also to both outputs (identical on both) or only to one output, left or right?
Hi Thomas, thank you, I'm happy that you find my video useful. The A and B out are the Left and Right output of you stereo rig, therefore I would say yes. Thank you for your question!
Grazie Leo, sei stato chiarissimo come sempre. Una curiosità : sui delay non c'è la possibilità di settarlo con ottavo puntato? Non l'ho visto sulla schermata che hai proiettato... O forse è solo quel tipo di delay (analog) che non ce l'ha, mentre altri lo prevedono? Grazie!
Grazie a te Milo!!!! Sai che hai ragione...non lo trovo...ho cercato su un pò di delay e non l'ho trovato...ovviamente con il tap tempo lo puoi settare... Grazie del messaggio!
Hi Leo really appreciate your input to demonstrate the ampero 2. I just recently purchased one as your videos was really encouraging to buy. Just a quick question please... How can I please use the only one stereo balanced output to split the signal to my stereo monitor and the foh to remain stereo. Is there any splitting device needed or just simply split each 1/4 to two. Cheers Roland from UK
Hi Roland, thank you so much, I'm really happy that you like the video!!! I'm not sure if I understood the question: you would like to feed a pair of stereo monitor and at the same time your real amp in stereo too? Thank you!
@Leo Gibson Actually I run two boss katanas in stereo on stage and I want stereo signal to the front of house mixer but I don't want to microphone my katanas. Cheers happy new years
Hey Leo thx for all your Ampero Stomp 2 videos. I have one question is it possible to split the output of the Ampero in to left and right just like the input ?
I am interested in this for multi fx use. I am curious if you skip the amp and IR blocks can you add additional fx blocks. Ultimately, I want my existing stereo fx to be able to be used in series or parallel modes. I want to replace my NUX Mod Core with programmable presets and use certain combinations of different delays when needed. I am impressed with the power this fx unit has. I am not really interested in amp models, but what I have heard sound really good.
Hola estimado gran video y como siempre gran contenido. Me compré la ampero II stombox y junto a ella un soul press 2 para poder usar de pedal de expresión. El problema es que cada vez que quiero calibrar el pedal en la stombox me da error, dejando los parámetros predeterminados entre 0 y 30 y luego nuevamente en 0. Quería consultar si pudiste calibrar el soul press 2 en la stombox de hotone. Saludos estimado y espero que le vaya muy bien en todo.
Hi Pablo, thank you, I'm happy that you like the video! I have not tried yet an external expression pedal, therefore I can't tell if this is a common problem...if someone knows...please drop here a message...
Hi, I asked them about the 44.1 and the scene / snapshots: they told me "perhaps with future firmware upgrades", even if I think that it's pretty difficult to upgrade from 44.1 to 48 via software. Thank you
Great video as always! BTW, how's the transition between presets? Is there preset spill over of delays/reverbs? How is the gap between preset change, if there is any?
Hi, yes there is the trail / spillover. There is a latency while switching presets...they say that they will implements scenes snapshots, but so far they are not available Thank you for your question!
@@LeoGibsonGtr Thanks for the response! I'm really interested with the unit, but I wish it has gapless preset switching like the Boss GT1000Core or the MX5.
Hi, as far as I know, the snapshots / scenes are not yet available in the Ampero. Hotone said that they will be added with future firmware upgrades... Thank you!
Grazie per questo video davvero esplicativo! Ho letto il manuale ed ho visto che si fa distinzione tra Preamp ed Amp. Sono un po' confuso. Un blocco Amp sarebbe un combo che include Amp e Cab? Un po' in stile Helix Stomp? Mentre il blocco Preamp si dovrebbe utilizzare in accoppiata con un Cab tra quelli disponibili?
Ciao, non esattamente. Un blocco amp è costituito da un preamp ed un power amp, mentre il cab contiene solo la cassa. Se ad esempio vuoi usare un preamp valvolare esterno, allora nell'Ampero puoi selezionare solo il power amp ed accoppiato ad un blocco cab. Se invece vuoi usare un power amp ed un cab ad esempio di un plugin (come torpedo wall of sound), puoi selezionare nell'Ampero solo il preamp. Trovo sia una soluzione molto flessibile. Spero chiaro. Grazie del messaggio
Leo....some who have the ampero2 are saying it runs out of dsp with just amp/cab/spring reverb...it would be interesting for you to see how robust the dsp is. thanx
Hi, in this video I've tried to give you an idea. Nevertheless I will try to do more... I've noticed that with the IR at maximum resolution it goes easy out of DSP....maybe I will do more tests. Thank you for your suggestion!
Hello Leo, i love your videos, just want to know which has more DSP power between HX stomp and the ampero stomp II , in terms of power which one do you recomend?
Hi, it's hard to answer...because it depends on the algorithms and the type of effects you place in the chain...so I'm not sure that there is a clear winner. Thank you for your message!
Hi, it works great. Maybe you can check out this video, where I have compared the Ampero Stomp 2 with other modellers in the loop of the ToneX pedal. Instead of the ToneX pedal you can put your amp...removing 3ms of latency from the latency test. Thank you!
A weak point of this system seems to be that if you want split the signal chain to use only 1 or 2 blocks, you're definitely losing the other ones in the split...for instance, i use all 6 in the first line, then I split to get only a parallel amp and IR and I cannot use the rest 4 blocks to complete my signal chain in the first line
Hi - I was considering moving from Pod GO to Ampero II Stomp for the following reasons: Limited DSP on Pod GO, Limited effects for Acoustic Guitars (not simulators, but to use my real acoustic steel and nylon guitars). 1. Has the DSP management improved with new firmware, and is the Ampero II more powerful than Pod GO in terms of over-all DSP? 2. Is there any noticeable latency in complex chain? 3. Is Ampero better to use with a real acoustic guitar? With POD I just use acoustic IR that I made. For Ampero I see that it has Piezo optimizer, Acoustic amps, but I see no demos to demonstrate this, or if they are good. It's unclear if the acoustic IRs are for use with a real acoustic guitar, or to use with magnetic electric guitar. I worry that those features might use all the DSP with no room for reverb. 4. I would like to do dual cabinet (or dual amp) to thicken some sounds. It looks like you are limited to 6 blocks each if you split the path. So if I do a complex chain with 8 effects, I cannot split to two cabinets at the very end? Since I must keep the overall chain under 6 blocks per cabinet? I'm concerned if it would really be better than Pod GO for this use.
Hi, interesting questions... For the questions related to the acoustic guitar, you can check out this video: ruclips.net/video/j5gsEETVN9Q/видео.html I have not checked the DSP improvements with new firmware, therefore I cannot tell. As regards latency, for me it is not an issue. When you use a double amp setup in the Ampero you are gonna use almost all the DSP. Thank you
Ciao Leo. Quel che manca rispetto all'Ampero 1 è la possibilità di usare la simulazione di cassa su un input e senza sull'altro. Se ad esempio voglio suonare con la mia cassa in concerto e dare il segnale con l'ir al fonico non posso...se uso più di sei blocchi. Giusto?
Ciao, intendi la simulazione su un output e senza sull'altro, giusto? Se così, si è corretto, puoi farlo usando meno di sei blocchi, almeno per quanto ho capito io / riscontrato sino ad oggi. Grazie del messaggio!
Ciao Leo, volevo prendere hx stomp ma ero indeciso sugli 8 blocchi soltanto, ora che ho visto ampero stomp con i suoi 12 blocchi sarei orientato su questo, ma in base al video, con il tri core regge bene i 12 blocchi? Sembrerebbe di no. Grazie per una tua eventuale risposta.
Ciao Giovanni, dipende da cosa inserisci nei blocchi. Ad es. un doppio amp e cab consuma parecchia DSP e quindi non puoi sfruttare i 12 blocchi, se usi mono delay puoi usarne diversi, etc. Quindi in effetti dipende un pò da che tipo di catena effetti vuoi riuscire ad implementare. Spero chiaro. Grazie del messaggio!
![ARGENTINA vs. CHILE [3-0] | RESUMEN | ELIMINATORIAS SUDAMERICANAS | FECHA 7](http://i.ytimg.com/vi/De3AWmXzhuA/mqdefault.jpg)
Just wanted to say thank you for the most detailed and comprehensive guitar gear reviews and comparisons on youtube. They are so helpful.
Thank you so much Paul, I'm super happy that you find my videos useful!!!
Its really hard to choose a modeler when there are so many and you can't just go to a store and try them out for hours. Your videos are a must watch. Thank you Leo!!!
Thank you so much, I'm really happy that you find the videos useful!!
Best info on Ampero thx👍🏻
Thank you so much, I'm really happy that you like the videos!
Thanks for such a concise and thoughtful overview!
You are welcome, I'm happy that you like the video!
Happy with my gear ATM. Just here for the tunes. Love your music and playing Leo!
Hi Charles, thank you so much...this is a great compliment...when you like my music...I'm super happy!
Thank You Leo for another great video. I received my Ampero Stomp yesterday and so far it has been great. Your example of the signal chain is easy to follow. I hope to use it live this next week in our Worship Band.
Thank you Ralph, I'm happy that you like the video!!! Thank you also for sharing your purchase decision!!
Hi leo. I like the professionalism with which you always make your videos.
A deserved like and account with my subscription.
I do not speak English, but I hope you understood.
Greetings from Colombia!
Hi, thank you so much, your feedback and support is super important for me! And yes, your English is fine...I understood everything. Thank you!
Wow this pedal just had a major firmware update release and it's user interface has been upgraded to the stage 2❤
Yes, thank you for pointing it out!!!
@@LeoGibsonGtr you're welcome might be worth looking into what exactly is included in the firmware update.
Really powerful and good sounding product. Very interesting demo song as usual. Sparked my creativity and now I'm trying to replicate your tone on my POD Go. It's a great time to be a guitarist. God bless and rock on 👍😎🎸
Cool, I'm happy for this...it's kind of a strange song...I'm happy that you have found it interesting....and I think that the only problem you will have with the POD GO is it's missing possibility to have parallel effects ad therefore parallel delays.
Thank you!
Love your videos Leo!! Just got an ampero 2 stomp and your videos on it are top notch!! Thank you for your videos 🙏🙏
You are welcome and thank you so much for your feedback, I'm really happy that you like the videos!!!
leo you are the best, this is the very same question I had!
Thank you so much...your feedback is super important!!!
Thanks, great video, as always. What a great time to be a (amateur) guitarplayer, so many great sounding gear for so little money!
You are welcome! Yes, I do agree....there are amazing units in the market, with a lot of possibilities...
Thank you for your message and I'm happy that you like the video!
Amazing composition Leo!
Thank you so much....when you like my music...I'm super happy!
Thanks a lot for this video Leo!!!! Is very explicit and really is a great help to understand the multiples signal chains of the Ampero II ;). Best Regards
You are welcome, I'm happy to have been of some help!
@@LeoGibsonGtr 💪😉
great demo...seems like a great competitor for the Helix
Thank you! Yes, I do agree....
Sweet chords ♥️
Thank you, super appreciated!!!
Great video as always ! The Stomp 2 seems quite underpowered i must say since you were able to hit the dsp limit with just 7 blocks that seemed to be a pretty standard chain and nothing excessive.
Hi Stefan, thank you for sharing. I would only add that this is the first iteration of the sw and fw, therefore maybe they need to tweak and optimise the algorithms ...
Thank you!
@@LeoGibsonGtr Hey Leo, is the fw and sw more optimised now to allow for longer chains?
Thank you Leo. Another very useful educational video. I just received the unit couple of days ago. I found the amp sounds excellent and cabs also excellent. They seem to take less DSP then IR so can easily use 2 amps 2 cabs. If you place CAB at the end of the chain you can split and send one output to PA with the CAB and the other prior to split to power amp with guitar speakers. This is my first Ampero product. Do you think, the amp and cab sounds are significantly improved from the old?
Hi, thank you! My first impression is that the amp sound is very similar but the cab section has improved...but I have to do a direct comparison video to be able to answer properly.
Thank you once more!
Complimenti bellissimo il brano iniziale,mi sono appena iscritto ,penso un che passerò i prossimi giorni guardando i video presenti nel canale,il suono bello molto interessante la flessibilità sulla catena effetti , volevo prendere hx stomp ma vedendo questo ampero credo che aspetterò ,devo valutarlo bene, ciao 😄😄😄
Grazie mille!!! Mi fa molto piacere che ti sia piaciuta la music a la tua iscrizione significa molto per me!!! Se ti piace la musica, mi permetto di segnalarti questa playlist di miei brani: ruclips.net/p/PL5d6_Yq6oCrwnnNHTA0KoVX-H6L1Jo134
Grazie ancora!!!
👌♥️
👍🏻🎸
Looks really well designed.
Hi, thank you for sharing...it's pretty easy to use.
That's a great little unit and they've definitely priced it aggressively.
Hi, thank you for sharing your opinion...yes...it's nice...
Thx for the good video. There should be more videos like this one showing what the limitations of certain devices are. Just reading the numbers (XY effects, EY effects simultaneously, etc.) can be misleading.
Hi, thank you, I'm happy that you like the video and to have been of some help!
Another very interesting video. I wonder if the next update will include a snapshots/scenes type feature. I hope it will.
Thank you Stevo, I'm super happy that you like the video!!! I've asked and they told me that they will include scene / snapshot....but I don't know when and if they actually will....
Thanks!
Nice video Leo as allways! hope to see some amp comparison with real one or more professional modellers... Ciao!
Hi Pier Francesco, yes, I will do other comparison videos...so far, if you want, you can check out some comparisons with real amps in the Ampero 2 review video and in the comparison with the HX Stomp and the GT 1k core.
Thank you!
Nice composition to start the video. Does this unit have something equivalent to the Snapshots on the HX Stomp?
Hi, thank you! Not yet. They told me that it should be added with future firmware upgrade...but so far snapshots or scenes are not available..
Thank you!
Leo congrats. You put the most valuable videos of the gear on youtube! I am little bit confused of DSP capacity of this unit. What if I would like to combine chain which have 2 amps, 2 cabs, 2 reverbs, 2 delays? Is it possible or not? I really wanted to buy BOSS 1000 CORE but your videos about Ampero made me thinking!
Hi Mike, there are two considerations: 1) the firmware and the software are in their infancy....so the algorithms could be optimized in future firmware upgrades allowing us to use more effects blocks 2) the amp and the cab are pretty taxing the DSP and therefore if you use two amps you are limited in terms of other effects you can put. For sure the GT 1000 core allows you to put more amp and effects in the chain.
Thank you!
Hello Leo, your demo videos are very instructional. Thank you very much. I ask whether the following set is possible: Two guitars (one electric and one acoustic) into the two inputs, then two separate chains with different effects and amps - > at the end a mix of both chains - that's an A/B-Y set, ok. But my question is, would it be possible to send this A/B-Y-mix also to both outputs (identical on both) or only to one output, left or right?
Hi Thomas, thank you, I'm happy that you find my video useful.
The A and B out are the Left and Right output of you stereo rig, therefore I would say yes.
Thank you for your question!
Great tutorial and explanation.
Is it possible to dedicate a chain to the FX loop, and dedicate another chain to the front of my amp?
Hi, I think yes...but I'm not 100% sure...
Thank you!
Grazie Leo, sei stato chiarissimo come sempre. Una curiosità : sui delay non c'è la possibilità di settarlo con ottavo puntato? Non l'ho visto sulla schermata che hai proiettato... O forse è solo quel tipo di delay (analog) che non ce l'ha, mentre altri lo prevedono? Grazie!
Grazie a te Milo!!!! Sai che hai ragione...non lo trovo...ho cercato su un pò di delay e non l'ho trovato...ovviamente con il tap tempo lo puoi settare...
Grazie del messaggio!
Hi Leo really appreciate your input to demonstrate the ampero 2. I just recently purchased one as your videos was really encouraging to buy.
Just a quick question please...
How can I please use the only one stereo balanced output to split the signal to my stereo monitor and the foh to remain stereo.
Is there any splitting device needed or just simply split each 1/4 to two.
Cheers Roland from UK
Hi Roland, thank you so much, I'm really happy that you like the video!!!
I'm not sure if I understood the question: you would like to feed a pair of stereo monitor and at the same time your real amp in stereo too?
Thank you!
@Leo Gibson
Actually I run two boss katanas in stereo on stage and I want stereo signal to the front of house mixer but I don't want to microphone my katanas. Cheers happy new years
I feel like the Ampero II for amp models and the GT-1000CORE for FX would be a good combo.
Hi, yes...expecially for Boss effects lovers...
Thank you for your message!
Hey Leo thx for all your Ampero Stomp 2 videos.
I have one question is it possible to split the output of the Ampero in to left and right just like the input ?
I am interested in this for multi fx use. I am curious if you skip the amp and IR blocks can you add additional fx blocks. Ultimately, I want my existing stereo fx to be able to be used in series or parallel modes. I want to replace my NUX Mod Core with programmable presets and use certain combinations of different delays when needed. I am impressed with the power this fx unit has. I am not really interested in amp models, but what I have heard sound really good.
Hi, yes, you can skip the amp and cab blocks, using this unit only for effects.
Thank you!
I’m wondering if you will be coming back to this with the latest firmware?
Hi, ... I need to find the time...as it's interesting....
Thank you for pointing it out....
Hola estimado gran video y como siempre gran contenido. Me compré la ampero II stombox y junto a ella un soul press 2 para poder usar de pedal de expresión. El problema es que cada vez que quiero calibrar el pedal en la stombox me da error, dejando los parámetros predeterminados entre 0 y 30 y luego nuevamente en 0. Quería consultar si pudiste calibrar el soul press 2 en la stombox de hotone. Saludos estimado y espero que le vaya muy bien en todo.
Hi Pablo, thank you, I'm happy that you like the video! I have not tried yet an external expression pedal, therefore I can't tell if this is a common problem...if someone knows...please drop here a message...
Has someone asked and received any answer if Hotone is planing to up the sample rate to 48khz?
It's been a thing since the first Ampero. Probably no
Hi, I asked them about the 44.1 and the scene / snapshots: they told me "perhaps with future firmware upgrades", even if I think that it's pretty difficult to upgrade from 44.1 to 48 via software.
Thank you
Great video as always! BTW, how's the transition between presets? Is there preset spill over of delays/reverbs? How is the gap between preset change, if there is any?
Hi, yes there is the trail / spillover. There is a latency while switching presets...they say that they will implements scenes snapshots, but so far they are not available
Thank you for your question!
@@LeoGibsonGtr Thanks for the response! I'm really interested with the unit, but I wish it has gapless preset switching like the Boss GT1000Core or the MX5.
Hi, as far as I know, the snapshots / scenes are not yet available in the Ampero. Hotone said that they will be added with future firmware upgrades...
Thank you!
Grazie per questo video davvero esplicativo! Ho letto il manuale ed ho visto che si fa distinzione tra Preamp ed Amp. Sono un po' confuso. Un blocco Amp sarebbe un combo che include Amp e Cab? Un po' in stile Helix Stomp? Mentre il blocco Preamp si dovrebbe utilizzare in accoppiata con un Cab tra quelli disponibili?
Ciao, non esattamente. Un blocco amp è costituito da un preamp ed un power amp, mentre il cab contiene solo la cassa. Se ad esempio vuoi usare un preamp valvolare esterno, allora nell'Ampero puoi selezionare solo il power amp ed accoppiato ad un blocco cab. Se invece vuoi usare un power amp ed un cab ad esempio di un plugin (come torpedo wall of sound), puoi selezionare nell'Ampero solo il preamp. Trovo sia una soluzione molto flessibile.
Spero chiaro.
Grazie del messaggio
@@LeoGibsonGtr grazie , chiaro!!
Grazie a te!
Hello Leo, which if youre going to choose from Hxstomp or ampero 2. which one are you going to choose?
Hi Kevin, you can check out this video for my full comparison: ruclips.net/video/2kugoLNLqPQ/видео.html
Thank you!
Leo....some who have the ampero2 are saying it runs out of dsp with just amp/cab/spring reverb...it would be interesting for you to see how robust the dsp is. thanx
Hi, in this video I've tried to give you an idea. Nevertheless I will try to do more... I've noticed that with the IR at maximum resolution it goes easy out of DSP....maybe I will do more tests.
Thank you for your suggestion!
Hello Leo, i love your videos, just want to know which has more DSP power between HX stomp and the ampero stomp II , in terms of power which one do you recomend?
Hi, it's hard to answer...because it depends on the algorithms and the type of effects you place in the chain...so I'm not sure that there is a clear winner.
Thank you for your message!
Hi Leo, about the split/mixer chain, can you change the output from line A to line B? Then you could use the missing blocks on the line B?
Hi Gabriel, as far as I know you cannot do it...but I'm not 100% sure. If somebody knows, please drop here a message
Thank you!
Leo I constantly get a system overload when I'm making a patch. Sounds like dying robots when this happens.... not sure what the heck I'm doing wrong.
Hi Cody, are you using high quality IRs? that draws a lot of DSP power...
Thank you for your message!
I have to buy now, I'm confused which one to buy? Pod hx stomp or hotone 2
Hi, maybe you can check out this video: ruclips.net/video/2kugoLNLqPQ/видео.html
Thank you!
Hi man, how does this unit sound in the effects loop of an amp? I want to use it just for the effects.
Hi, it works great. Maybe you can check out this video, where I have compared the Ampero Stomp 2 with other modellers in the loop of the ToneX pedal. Instead of the ToneX pedal you can put your amp...removing 3ms of latency from the latency test.
Thank you!
@@LeoGibsonGtr Thanks man, do you have any experience with the Boss MS-3? Here in Belgium they are about the same price.
You are welcome! Unfortunately I have never tried the MS 3...I think it should have the typically BOSS effects...but I'm not sure.
Thank you!
can you do a tutorial where you combine the Ampero 2 to your pedalboard
Hi, it's a good idea...maybe in the coming weeks I will do it. Thank you for your suggestion!
Can Ampero II works well with external Drive, delay and Reverb Pedals? Can You make a video like that for us? Thank You.
Hi, yes it can...I will think about it, thank you for your suggestion!
A weak point of this system seems to be that if you want split the signal chain to use only 1 or 2 blocks, you're definitely losing the other ones in the split...for instance, i use all 6 in the first line, then I split to get only a parallel amp and IR and I cannot use the rest 4 blocks to complete my signal chain in the first line
Hi Fabrizio, thank you for sharing! I think you are right...
Hi - I was considering moving from Pod GO to Ampero II Stomp for the following reasons: Limited DSP on Pod GO, Limited effects for Acoustic Guitars (not simulators, but to use my real acoustic steel and nylon guitars). 1. Has the DSP management improved with new firmware, and is the Ampero II more powerful than Pod GO in terms of over-all DSP? 2. Is there any noticeable latency in complex chain? 3. Is Ampero better to use with a real acoustic guitar? With POD I just use acoustic IR that I made. For Ampero I see that it has Piezo optimizer, Acoustic amps, but I see no demos to demonstrate this, or if they are good. It's unclear if the acoustic IRs are for use with a real acoustic guitar, or to use with magnetic electric guitar. I worry that those features might use all the DSP with no room for reverb. 4. I would like to do dual cabinet (or dual amp) to thicken some sounds. It looks like you are limited to 6 blocks each if you split the path. So if I do a complex chain with 8 effects, I cannot split to two cabinets at the very end? Since I must keep the overall chain under 6 blocks per cabinet? I'm concerned if it would really be better than Pod GO for this use.
Hi, interesting questions...
For the questions related to the acoustic guitar, you can check out this video: ruclips.net/video/j5gsEETVN9Q/видео.html
I have not checked the DSP improvements with new firmware, therefore I cannot tell. As regards latency, for me it is not an issue. When you use a double amp setup in the Ampero you are gonna use almost all the DSP.
Thank you
Can it do parallel amps, or just parallel effects?
How is the SLO model compared to your SLO30?
Yes, it can.
I have the SLO 100, and it compares very well...in my demo review of the Ampero Stomp II you can hear it.
Thank you for your message!
Ciao Leo.
Quel che manca rispetto all'Ampero 1 è la possibilità di usare la simulazione di cassa su un input e senza sull'altro. Se ad esempio voglio suonare con la mia cassa in concerto e dare il segnale con l'ir al fonico non posso...se uso più di sei blocchi. Giusto?
Ciao,
intendi la simulazione su un output e senza sull'altro, giusto?
Se così, si è corretto, puoi farlo usando meno di sei blocchi, almeno per quanto ho capito io / riscontrato sino ad oggi.
Grazie del messaggio!
Ciao Leo, volevo prendere hx stomp ma ero indeciso sugli 8 blocchi soltanto, ora che ho visto ampero stomp con i suoi 12 blocchi sarei orientato su questo, ma in base al video, con il tri core regge bene i 12 blocchi? Sembrerebbe di no. Grazie per una tua eventuale risposta.
Ciao Giovanni, dipende da cosa inserisci nei blocchi. Ad es. un doppio amp e cab consuma parecchia DSP e quindi non puoi sfruttare i 12 blocchi, se usi mono delay puoi usarne diversi, etc. Quindi in effetti dipende un pò da che tipo di catena effetti vuoi riuscire ad implementare.
Spero chiaro.
Grazie del messaggio!
@@LeoGibsonGtr grazie della risposta... Molto chiara
Grazie a te!
Only 7 blocks consumes all processing capacity. Thats disappointing.
Thank you for sharing your findings!
ma per cuiriosita' tu sei italiano?
il tuo inglese e' molto scandito direi scolastico..
Ciao Simone, si sono italiano. Grazie del commento
Un saluto
@@LeoGibsonGtr bravissimo e competente!!!!!!!👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻
Grazie Simone!!!