How To Change the NASTY Chain & Sprockets on the MT-09 - Don't wait this long!!!

THREE YEARS is how long we left the chain and sprockets on this poor bike, don't be like us, take care of your bike, and your loved ones, and yourself!
Gear Breakdown:
Helmet - AGV K5-S - www.sportsbike...
If you live in the UK - www.sportsbikeshop.co.uk is your best friend!
Recording Equipment:
Main - Sony A7Riii - www.e-infin.co...
GoPros - Max | 9 Hero Black | 7 Hero Black - gopro.com/en/g...
Microphone - Tascam DR-05x - www.amazon.co....
Drone - DJI Mini Mavic - www.dji.com/uk...
Connect with us:
/ cagelessdel...​

[@petev.9357]

In the video you can clearly see that the masterlink is binding severely. You put the side plate on too far. You need to measure the spacing with calipers and compare to the other links. There is also a spec. for the flare of the rivets.

[@Vedran.]

Yes, 15:21

[@darienrogers4673]

I’m about to do this for the first time on my 14’ 09. New sprockets and chain so what do you suggest I do to avoid making this mistake.

[@DL-sy5fv]

Why did not check the chain slack?

[@lukzor2692]

Good video mate!

[@kevinalvarez1998]

How many links?

[@davmanlop333]

Have you got 2 bikes now?

[@oscarescobar5622]

Were you applying loctite to the nuts in 8:21?

[@smolbodybuilder1602]

He should answer!

[@CagelessDelinquents]

Yes sorry for the delay, yes I was applying loctite!!

[@electroevolution5777]

No offense but you can CLEARLY see he is applying loctite haha.

[@liamsmith3829]

I did my sprocket nuts to 80nm and stripped them all. Dont know why they need to be so tight. Got a new sprocket carrier on its way now which will be going no more than 65nm

[@CagelessDelinquents]

Lol nothing is worse than putting load on a torque wrench and feeling it get loose

[@darrenwilliamson3614]

sure the rear wheels 146 N-M to Yamaha Spec

[@davidjohnston9615]

Mi