Don't think you've seen many of them then. I've built a better one when I was 14. Welded though, so it was a bit more solid. People make go cards that look like they come out of a factory, this was just a fun project. It's funny seeing people so impressed by his work not realizing that he's just having fun and most of what he builds is just quickly thrown together.
Colin I think I speak for everyone here when I say you're a great inventor. But with the recent relaunch of Robot Wars and the new US series Battlebots I believe that you sir should compete in the 2017 season! Like if you agree!
Ah i really liked this in tutorial form - I'd love to see more builds like this - w/ or w/o welder, but just with every detail kind of explained like this. Very cool, thanks!!
Ditto I’m in the us and the shipping on the website is more than the actual engine Edit:hey thanks for the advice I’m actually building a golfer and that really helped
I love watching these videos you care and love you put into making this as accessible as possible always makes me so happy. It’s just a really, really, nice thing of you to take the time to make a project that will inspire people to get out and make something!
Assuming that the scrapyard took motorbikes, it wouldn't really be that much harder that this. Pretty much all of those materials apart from the wheels would have been available.
He mentioned to phone the website to see what parts he used and where you could also find them, I recommend amazon or ebay. Or any good DIY shop, for instance B&Q.
only downside is he lost the foot brake where you take your right foot and stick it on the pavement adds an extra amount of stopping force and makes your shoes look like the tires on the car... completely smooth
Formula 1 cars stopped using the Plywood for the underside grinding plate, now its a Titanium sheet, they use it because titanium work hardens and gets harder to grind down on the tarmac the more it gets hit, and... y'know.... plywood catches fire
1) have no words for your intelligence and clarity 2) I wonder who in the right mind would dislike the video. Makes no sense 3) would appreciate to know a) are you changing gears without a clutch b) also want to understand why you did not simply weld the tie rod at an angle on the wheel /Tyre instead of painstakingly bending the square tube Thanks
The video says in the title NO WELDER . And not all engines need a clutch to be manually operated , on most low cc engines you just get off the throttle , change gear and then open the throttle again .
I think this is a great build, I'm not sure if he mentioned it but if you are going do this get some lock washers or some sort of thread lock so you aren't constantly chasing loose bolts.
Pure genius!!!!!!! I love every single thing about this video. I have a couple of motor and even more grandkids. I am going to use this video for both 😎
And if you're at all concerned about the structural integrity of your face, make sure to use locknuts or some kind of thread lock on all the bolts as they may otherwise shake lose over time resulting in injury or death.
PJ he used an electric drill and probably torque wrench to do them up. it will take way more than a bit of shaking to make them fall out. plus he probably put some nut lock gel onto them anyway
Sadly the the safety tie seems to have given way to his own T-shirts. I understand the need to promote the T-shirts but doing all these dangerous things without his tie puts him at serious risk of an accident and none of us wants that.
Nuts shake loose surprisingly easily and the complete absence of any suspension or engine mounting bushes on a go kart like this makes them vibrate like mad.
Hey Collin I love your ideas and i would really enjoy it to do some cool stuff like you but i live in Germany and i am 15 years old and i havent got so nice equipe. I am also a crazy guy who has got alot ideas but i cant do anything with them. I am really yealous on you so do your thing, its so amazing!! Felix ✌🏼
Mr. Furze, I Love your channel and everything that you do. You promote learning beyond the class room, beyond wealth, beyond age, and it's defiantly some thing that this world needs more of. We don't need video games, we don't need politics, what we need is growth in and of our self's and that's what you're promoting/creating. Growth in one's self. Thank you.
I don't know what to say! I have a 90 PY Jetro bike but I didn't know I can make a Go Kart for myself. I was just driving my bike & enjoying it but since you showed that video, I'm interested in making that thing. Thanks for the video.
Pozdrav Kuja I didn't lol. Personally asked an expert at an event like a year ago and he said 20-30k for a Chieftain mark 11 WITHOUT the firing mechanism
ALL MIGHT And you are a very deep minded person, too deep. I was commenting a simple statement to a simple comment. Not overthinking it like you just have.
I forgot to ask what you do with the cool items you build. If I had the money I would love to try and purchase this go-cart or something able to be sat in for a little fun, something I don't get to do anymore. You are very, very talented Colin. Thanks, Lou Grossi
To keep it safe you would have to reduce power to 10HP max and 48V (to comply with the low voltage directive). That would still mean for a 10 minute run time you would need about a 2kWh battery to account for losses. Second hand you can get one for about double the price of this entire project (assuming lithium). The motor would then cost you about the same as this entire project and the electronics to control it would cost the same again. You could go cheaper and use lead acid but you would need 8 off 100AH batteries at about 30kg each. That's 240kg of batteries! It still would not be much cheaper as those are about £125 each. So still £1000 for batteries.
Or, better/worse: a hybrid! For the more tinkering engineers, a nice project to work on drivetrain efficiency. I just told a friend with a hybrid supercar project to do a kart like this as a first step. Why wouldn't you? test first how much racing you get done on 1 liter of fuel. then add electric bits, and see how fast (and fast) it'll go then. Especially rain (or dirt) racing will be interesting, when yo add electric FWD.
Cloxxki as mentioned above the reason you would not bother is cost. It would triple the cost of the build at least. A second hand 10KVA generator is about £1200 alone. That is more than the entire current build cost. Then you would need 4x 2.5HP (about 2KW) electric motors of a type suitable for driving the wheels. That would be about £800 if you were lucky, again more than the current build cost. Then you would need the electrical power train which would cost at least £500 as it is not a common type to use. So would you really want to spend in excess of £2500 for something that would cost you about £700 elsewise? Also remember it would vastly increase weight, reducing performance. So in effect you would have something between 3 and 4 times more expensive with probably 2/3 of the performance.
Oh, I'd not disconnect the ICE from the wheels, that's crazy inefficient. In the supercar realm, hybrids are considered a performance booster. In the case of some that may be true, but indeed, overcoming its own added weight is quite a challenge.
I need to walk 30 mins to school because my parents cant drive me there because they have a job early in the morning and i have no money for anything like that so yeah i would like to have that one too
Colin JT here first time viewing your Channel and I must say I am quite impressed with what you've built without using a welder I'll be subscribing you have a great day and a better night take care buddy
Hi Colon, I am from Salisbury, North Carolina, USA and I wanted to say thank you for your detailed videos. I am so enjoying watching them. As a child I was a kind of inventor but unfortunately as an adult I was in a tragic work accident which caused me to become disabled not completely but after many years I came to the conclusion I will never be 100% ever again. I have a wife of 34 years who has Multiple Sclerosis so or financial situation does not allow for much. I have a project restoration that I work on very infrequently due to my physical limitations but even worse financial limitations which is a 1981 Honda CB900 Custom. It needs a back rest, crash bars for the engine case as well as luggage. If we lived by you I would have loved to have your help in manufacturing the items as your work is so neat and clean. I wish I had the funds and talent to finish this project but I think I bit off more than I can chew. Thanks for your videos, Louis Grossi
You're going to have to browse back through some of his older pulse jet videos, he's basically already done this. (though he used it as a snow-blower, since it was winter)
@Jason Kuy, he’s saying that with the cost of all the nuts and bolts, it might be cheaper or just as much to buy a stick welder and some sticks, then you could also use it for another project--- @ steve jones, we are on RUclips aren’t we
Me and my cousin built a no weld go-cart back in 1975 from an old lawnmower. Lots of drillin and bolts but it wasn’t nearly as nice as this. We also put a 3 1/2 hp Briggs on a bicycle but that’s another story. Wish this guy wuz around back then, I’d a probably had his poster on my wall, lol.
Very cool, but man I would use a bunch of lockwashers and whole container of loctite on that thing. Seems like as is it'll be rattling apart every hour.
John Ridley I think he built it first with normal nuts as they are handy to take off I think he took it apart again to paint then rebuilt it with locknuts
yes, that's the normal course of action when you built a custom bike or custom anything. Otherwise, you make changes while it's painted and have to repaint parts of it anyways
Well its just stupid to paint parts befor the whole project is done, same with cars you don't paint sertain parts when you done with them, you paint it when everything is in place and works as it should. its waste of material if you paint then end up scratching it when building it and if the parts are wrong well guess you hafto paint another one as well.
I think melig1991 was just thinking what I was, which was to just run a rattle can over it whilst it was still together :P I know, I know THE BOLTS!!! :D
You know a series is good when part two has the exact same amount of views as part one.
Here we go its finished and is a nice little runner, just a gear adjustment is all i'd change so go on get cracking. subscribe n all that
colinfurze nice job
.
colinfurze how do you think on average this took
colinfurze this is pretty neat
Thanks for this quality video!
Single seat in the middle, mid engine... hmmm
It’s a McLaren!
Junior McLaren
more like an MR2 because japanese fuel tank
it's the new C9
Lmfao new c9. I about died
Lol it funny
colin: expertly crafts a chariot rivaled only by F1 cars in its magnificience
also colin: duct tapes speedo to the steering wheel
literally
This is the most well built home made go kart I've ever seen lol
Also, the 50 fps is making the video buffer :/
U get the option to watch it in 30fps, but i'd just recommend better internet in general xD 50/60fps it pleasing to the eyes.
The 50 fps makes it look nicer, and if its buffering for you, your internet isnt fast enough
Don't think you've seen many of them then. I've built a better one when I was 14. Welded though, so it was a bit more solid. People make go cards that look like they come out of a factory, this was just a fun project. It's funny seeing people so impressed by his work not realizing that he's just having fun and most of what he builds is just quickly thrown together.
I'm sure yours was faster, but I doubt your 14 year old self could weld something together as legit as this.
Colin I think I speak for everyone here when I say you're a great inventor. But with the recent relaunch of Robot Wars and the new US series Battlebots I believe that you sir should compete in the 2017 season! Like if you agree!
TheSkarus, The fire breathing, jet powered Furzosaurus for the win. 😂
he would probably wreck the other competitors with degrees in robotics :p
+martin mystere Who need degree when you habe pulse jet engine? :P
hell yes
He should have a jet-powered robot called Afterburner.
Ah i really liked this in tutorial form - I'd love to see more builds like this - w/ or w/o welder, but just with every detail kind of explained like this. Very cool, thanks!!
just the bolts would exceed my budget
Use plenty of duct tape and zip ties 😂🤣
Mate... I've started buying the parts and I'm like.. Ohh so this isn't a cheap project
i got plently of bolt but i dont have any steel tubing :S
Ditto I’m in the us and the shipping on the website is more than the actual engine
Edit:hey thanks for the advice I’m actually building a golfer and that really helped
@@tommybaugher9484 go to harbor frieght. They have 212cc motors for 99 bucks and if you buy it in the store you dont have shipping :)
So its seems 50fps gets the thumbs up and the first song thumbs down
hahaha the first song was terrible xD
Great video! Keep it up :)
MrBalobba yes the video was great
How do you pick apples from the top of apple trees? :/
Just curious, why is the video at 50fps? Nothing wrong with it of course just wondering.
i wonder how many people watched the video all exited than looked for the parts online and left the chat
im making one i bought the wheels for 35 the axle for 25 and its out of wood I'm check my channal
Thats how you make go kart 😒
i did
@@justbuilds8248 pls send parts u bought
I love watching these videos you care and love you put into making this as accessible as possible always makes me so happy. It’s just a really, really, nice thing of you to take the time to make a project that will inspire people to get out and make something!
Your Son is going to grow up with one of the best DADS on the PLANET! YOUR AN INSPIRATION TO DADS EVERYWHERE ! Thanks !😀🏁
This is the best home made go cart I've ever seen
Leo Connor this is the only homemade go kart I’ve ever seen
@@alaminkadir9543 Have u seen the shopping go cart
U didn't see a lot than
Then you haven’t seen many homemade go karts
Now for your next challenge build a go cart with only things you can find in an auto scrap yard, including the motor, seat, bolts, etc
Smajo Lelak that would be so awesome
Remember Junkyard Wars/Scrapheap Challenge? That was my childhood, here in the States.
Smajo Lelak The funny thing is, that is what most of his old projects were made of.
Assuming that the scrapyard took motorbikes, it wouldn't really be that much harder that this. Pretty much all of those materials apart from the wheels would have been available.
Joshua Rosen car engine would be fine XD
Oh man this is epic!!!
it's beautiful, it inspire others to build their own with less skills & the most important thing is having fun building & riding it🚜
Colin you rock! thanks again. I'm making this for a winter project!!!!!!!
Justin Kraus You should upload the progress
I want to build it, but I do not find all parts on the internet site
He mentioned to phone the website to see what parts he used and where you could also find them, I recommend amazon or ebay. Or any good DIY shop, for instance B&Q.
Hell yeah, I was just makin plans for this with my tax return.
I'd like ta say that you really have a talent in this sphere and continue your activity
Viewer: "But Colin, where does the differential, or the suspension go?"
Colin: *laughs*
go karts have neither
A proper race karts 'differential' is corner jacking
Spook it’s a joke. Over the head it went
You cannot beat abit of classic Colin 👍 so happy to see where he ended up
I just thought not only did the ply wood add rigidity but it probably stopped a lot of stones flicking up and hitting your bonce
And accidentally running over your ownegs haha
Legs*
@@darkopontin871 You could have just edited the comment.
you mean booty :D
only downside is he lost the foot brake where you take your right foot and stick it on the pavement adds an extra amount of stopping force and makes your shoes look like the tires on the car... completely smooth
i worked for a company that made aero space devices,, they could learn a lot from you colin brilliant
This man's a legend
Stuff like this restores my faith in humanity. well done sir
Please make a zombie apocalypse survival vehicle !!!
Cheeky Memes this is a good idea should do it
Yes! It will go rather nicely with the bunker and armoury. He has weaponised a tuk-tuk but that won't be great post-apocalypse.
+Shenanigan Studios it would be great if he changed it to a real gun dude.
Not Doge and put some doors on it
and a plough! Maybe snow plough
Formula 1 cars stopped using the Plywood for the underside grinding plate, now its a Titanium sheet, they use it because titanium work hardens and gets harder to grind down on the tarmac the more it gets hit, and... y'know.... plywood catches fire
na i think there is still a plank, just titanium screws
colinfurze lol. I see what you did
Yeah definitely still got a wooden skid plate, it's used for post race checks to make sure they're not running the cars lower than the FIA rules allow
Yeah and the seat is made of gold
мда
The camera view when he’s driving is so satisfying
1) have no words for your intelligence and clarity
2) I wonder who in the right mind would dislike the video. Makes no sense
3) would appreciate to know
a) are you changing gears without
a clutch
b) also want to understand why you did not simply weld the tie rod at an angle on the wheel /Tyre instead of painstakingly bending the square tube
Thanks
The video says in the title NO WELDER .
And not all engines need a clutch to be manually operated , on most low cc engines you just get off the throttle , change gear and then open the throttle again .
These simple project videos appear to be turning to something of a series, why not give it a name? Perhaps: Simple Project Simple Tools Series.
Could you make the music i little bit quieter and your voice a little louder in the edit?
Emoticons It would make watching with headphones a bit easier^^
Manu El I don't even listen with headphones
Every single video this gets asked. I watch them with my mouse on the slider for the duration.
Try this guys. lifehacker.com/5986236/normalize-the-sound-volume-on-your-pc-with-windows-loudness-equalization-setting
Agreed. It made it almost unwatchable.
I think this is a great build, I'm not sure if he mentioned it but if you are going do this get some lock washers or some sort of thread lock so you aren't constantly chasing loose bolts.
Pure genius!!!!!!! I love every single thing about this video. I have a couple of motor and even more grandkids. I am going to use this video for both 😎
And if you're at all concerned about the structural integrity of your face, make sure to use locknuts or some kind of thread lock on all the bolts as they may otherwise shake lose over time resulting in injury or death.
You should always wear your safety tie!
PJ he used an electric drill and probably torque wrench to do them up. it will take way more than a bit of shaking to make them fall out. plus he probably put some nut lock gel onto them anyway
Sadly the the safety tie seems to have given way to his own T-shirts. I understand the need to promote the T-shirts but doing all these dangerous things without his tie puts him at serious risk of an accident and none of us wants that.
Nuts shake loose surprisingly easily and the complete absence of any suspension or engine mounting bushes on a go kart like this makes them vibrate like mad.
PJ lock nuts are garbage and don't work well. There for People that think wd40 is a good lubricant.
I love your inventions. I still cant believe they functionally work lol
Love your videos Colin! KEEP IT UP!!!!
Sir, you are a mechanical and entertainment genius.
O yeah yeah o yeah yeah yeah
Yo Colin! how about a DIY Electric skateboard similar to the Boosted Board?? that would be too sick.
Brilliant idea!
YungRaw too easy
How
JoshPod they're already kits available and so many people have done it on youtube, if he makes it he better attach a turbo engine or something
Yes but Colin is making it so I'm sure it will be 'interesting' enough and he could make it stupidly fast.
+colinfurze what was that app you used on your phone as a speedometer on the steering wheel 9:25
just called speedometer
A simple man
thanks
Too easy ;P
Padraig Lynch lollipop Up
He make look soo easy ;-;
pedro park ikr
pedro park *makes*
*He makes it look so easy
He made it look so easy
I have recently built one! Because of you! I didn't have the right tools and wnat can I say? You helped me!
Hey Collin
I love your ideas and i would really enjoy it to do some cool stuff like you but i live in Germany and i am 15 years old and i havent got so nice equipe. I am also a crazy guy who has got alot ideas but i cant do anything with them. I am really yealous on you so do your thing, its so amazing!!
Felix ✌🏼
Oh sorry i mean colin😝😅
FreestyleArt ich bin auch aus deutschland xD
ich glaube da sind wir nicht die einzigsten
Roman Modellbau der Motor hat garkeine Kupplung ;)
Kupplung ist im Motor mit samt Getriebe mein Projekt ist letztendlich daran gescheitert, da Kupplung und Getriebe selber machen is nich :D
I'm in high school, me and my friend are gonna build 2 go karts, this is giving me a ton of motovation to do so
Did you succed?
At first I was like oh wow this might be doable but then I lost all hope
I love how this guy is the best engineer I know and then just decides to simply tape a phone to the steering wheel for a speedometer.
I mean hey, if it works it works. Simple solution prob is better in this case.
Now that I think about it, Colin looks like a younger Chef Ramsay.
does it not have a clutch? or does the engine have one of those internal clutches?
internal
Simon Yu
You're cool, man! )
Sequential gearbox, I think
internal
I made this. Works great! I used a bigger engine from a motorbike.
Proof or it never happened. Awesome tho if you did
what are the mesurments for the frame
Adam Znamierowski it depends on how tall you are and how much leg room you need/want.
jason lul i don’t know i didn’t count up ever penny but somewhere around 500 bucks
Sure you did! And you have the video to prove it, right?
Mr. Furze,
I Love your channel and everything that you do. You promote learning beyond the class room, beyond wealth, beyond age, and it's defiantly some thing that this world needs more of. We don't need video games, we don't need politics, what we need is growth in and of our self's and that's what you're promoting/creating. Growth in one's self. Thank you.
U did a doughnut with something u build in ur basement 💪😎😏🤳respect amazing speechless
He made it in his shed
It's a underground bunker not a basement
Cause he is English
@@creativethinks3935 He even build this shed
Colin: "They are all colour coded so you can't get it wrong"
Colour Blind Person: "Fuck..."
funniest comment ive seen
People: I wish I had a Go-Kart.
Colin Furze: It's Ready, Let's Test It!
I don't know what to say! I have a 90 PY Jetro bike but I didn't know I can make a Go Kart for myself. I was just driving my bike & enjoying it but since you showed that video, I'm interested in making that thing. Thanks for the video.
Imagine Colin having a enginuity battle with Chris, from “rather b welding”
Imagine living next door to Colin.
Dude you're a legend lol
Men are never to old for a good ol gokart ride.
please put a 125 2 stroke in this
Aj Ahner and 85 would be almost too much
Yea. But a 125 would be way too much. Imagine this crazy guy on a crazy kart
Aj Ahner exactly what i thought, with a lighter ally frame, would be awesome
Yea
It must be a 500 2 stroke
Please build a drifting go-cart or off-road go-cart!!!
with handbrake for awesome skids :)
Andras Kovacs offroad!
actually the breaks are like ebreaks already since they are purely stopping the rear wheel only :)
You should build a tank that shoots fireworks.
Nick Frampton It's not like a tank is 20-30k+ (WITHOUT the firing mechanism)
you can get a decent tank for about 10k, dont make up random figures.
Tom you are a very shallow minded person, who says the tank has to be full size? he could build a tank just a little bit bigger than this gokart.
Pozdrav Kuja I didn't lol. Personally asked an expert at an event like a year ago and he said 20-30k for a Chieftain mark 11 WITHOUT the firing mechanism
ALL MIGHT And you are a very deep minded person, too deep. I was commenting a simple statement to a simple comment. Not overthinking it like you just have.
one of the best go kart maker
hey can I know how to make it like what's the size of everything
0:19 this seat must be 80mm lower i think
why you didn't mount it under the frame?
Никита Найденов if the bolts came undone you'd be screwed.
double bolts
and have 80mm lower mass center :)
if you make it yourself, do just that. The plans are fairly simple and open for modifications :o
If the bolts came undone you would loose your nuts!
Hahahhahahahaha
That windshield wiper container is from a Datsun/Nissan Z car
I forgot to ask what you do with the cool items you build. If I had the money I would love to try and purchase this go-cart or something able to be sat in for a little fun, something I don't get to do anymore. You are very, very talented Colin. Thanks, Lou Grossi
So Colin here's a challenge. Convert it to all electric now.... LOL
That's a great idea=)
To keep it safe you would have to reduce power to 10HP max and 48V (to comply with the low voltage directive). That would still mean for a 10 minute run time you would need about a 2kWh battery to account for losses. Second hand you can get one for about double the price of this entire project (assuming lithium). The motor would then cost you about the same as this entire project and the electronics to control it would cost the same again. You could go cheaper and use lead acid but you would need 8 off 100AH batteries at about 30kg each. That's 240kg of batteries! It still would not be much cheaper as those are about £125 each. So still £1000 for batteries.
Or, better/worse: a hybrid! For the more tinkering engineers, a nice project to work on drivetrain efficiency. I just told a friend with a hybrid supercar project to do a kart like this as a first step. Why wouldn't you?
test first how much racing you get done on 1 liter of fuel. then add electric bits, and see how fast (and fast) it'll go then. Especially rain (or dirt) racing will be interesting, when yo add electric FWD.
Cloxxki as mentioned above the reason you would not bother is cost. It would triple the cost of the build at least. A second hand 10KVA generator is about £1200 alone. That is more than the entire current build cost. Then you would need 4x 2.5HP (about 2KW) electric motors of a type suitable for driving the wheels. That would be about £800 if you were lucky, again more than the current build cost. Then you would need the electrical power train which would cost at least £500 as it is not a common type to use. So would you really want to spend in excess of £2500 for something that would cost you about £700 elsewise? Also remember it would vastly increase weight, reducing performance. So in effect you would have something between 3 and 4 times more expensive with probably 2/3 of the performance.
Oh, I'd not disconnect the ICE from the wheels, that's crazy inefficient.
In the supercar realm, hybrids are considered a performance booster. In the case of some that may be true, but indeed, overcoming its own added weight is quite a challenge.
I wish I could drive with that shit to school!! 😵
I need to walk 30 mins to school because my parents cant drive me there because they have a job early in the morning and i have no money for anything like that so yeah i would like to have that one too
Filip Marinković buy a bike
I have a bike but i cant store it in my school
Can't you buy a shitty bike ?
if you go fast enough nobody can stop you
Do you have some schematics on the length of your base. This would be a great project for my son and I.
Colin JT here first time viewing your Channel and I must say I am quite impressed with what you've built without using a welder I'll be subscribing you have a great day and a better night take care buddy
Was that 38kph or 38mph?
mph, with different sprockets engine is good for around 60mph
damn thats fast
its called km/h :D
it was 38mph
Ben Grijalva it was mph
do you have the measurements, and a video on how to actually build this. i love this channel and am looking forward tho the next video
what do you do with all this stuff
Hi Colon, I am from Salisbury, North Carolina, USA and I wanted to say thank you for your detailed videos. I am so enjoying watching them. As a child I was a kind of inventor but unfortunately as an adult I was in a tragic work accident which caused me to become disabled not completely but after many years I came to the conclusion I will never be 100% ever again. I have a wife of 34 years who has Multiple Sclerosis so or financial situation does not allow for much. I have a project restoration that I work on very infrequently due to my physical limitations but even worse financial limitations which is a 1981 Honda CB900 Custom. It needs a back rest, crash bars for the engine case as well as luggage. If we lived by you I would have loved to have your help in manufacturing the items as your work is so neat and clean. I wish I had the funds and talent to finish this project but I think I bit off more than I can chew. Thanks for your videos, Louis Grossi
Colon?
Can you pleace built a driving beer crate?
This is the greatest suggestion yet! :D
Pulse jet leaf blower!!!
pleace?
You're going to have to browse back through some of his older pulse jet videos, he's basically already done this. (though he used it as a snow-blower, since it was winter)
Why not mount the ignition and kill switches near you?
He's trying to make it as simple as possible to show people how little work it takes to actually MAKE a go cart
are you sponsored by Ryobi or just a fan of there products or both?
they just send me stuff, not sponsored but its ok
Hell, if some power tool company sent me free stuff I'd use it too.
mrRobbins999 Then get sponsored;) Noone is going to call you a sellout, because...well you're colin:D
sound, might have to try them out
how much cost that all?
Chrisfix would go crazy at all the opportunities to use thread locker
build an electric gokart and race it against the petrol kart. compare the two for power, price ,ease of building and robustness.
Idjles Erle fair play that's a sick idea
for the amount of bolts and nuts purchased, you could honestly buy a stick welder and a few packs of sticks to weld this with.
Adam M not everyone has a welder at home, so he's just giving an example of how its done
not everyone can weld @@jasonkuy7100
@Jason Kuy, he’s saying that with the cost of all the nuts and bolts, it might be cheaper or just as much to buy a stick welder and some sticks, then you could also use it for another project--- @ steve jones, we are on RUclips aren’t we
if you buy one of those instant darkening masks welding is ten time easier, welding 4mm steel with an arc welder is quite easy tbh
Not a chance
I mean, I HAVE a welder.
I just don't know how to use it so this is a pretty good alternative haha
Me and my cousin built a no weld go-cart back in 1975 from an old lawnmower. Lots of drillin and bolts but it wasn’t nearly as nice as this. We also put a 3 1/2 hp Briggs on a bicycle but that’s another story. Wish this guy wuz around back then, I’d a probably had his poster on my wall, lol.
9:32 why does the date at the top say 2015-02?
Yeah why?
its a rubbish camera
Basicly he didn't change the time on that camera and so that happens. Same happened in the firework filled van video he posted a few weeks back
colinfurze Thanks colin for responding ! :D
zygis because collin is a time travaler
:D I whish I had a go kart :(
But now you have a certified trustworthy guide to building one.
Carlos MMV For a lot of money.
MAKE ONE!!!!!!!!!! :D
*the courage to start building one
This would not cost alot of money the engine and shiz could be bought for next to nothing.
He's a plumber and he makes go kart........HE'S THE GOD DAMN MARIO!!!!!......or Green Mario
Sir Timothy is he really a plumber irl? i thought he was an IT worker
Nope, plumber. He said so.
He's a plumber, he said so in a multiple videos, like in one when he made a turkey boiling machine. :p
neksuscat oh wow this is the first video I've seen of him and i didn't pay much attention to what he said i was just like "=O" the entire time
Don't like this comment!!!!
I don't want to mess up the 69 likes. (He he )
10 million subs collin, well done
anyone hate music that always plays during Colin doing stuffs?
Syâh WolfFactory it suits whats happening so no
Syâh WolfFactory not at all. I actually have Brawlers album. Wondering if Furze actually likes the tunes or gets paid to play em
no I love it and part of what makes him so unique
Syâh WolfFactory So fucking much
i just think its too loud compared to his talking.
what is the length and width of the go kart frame.....?
20 millions meters
You are the Best
You give me the inspiration to become a go-kart enthusiast
put some tank tracks under it, get some armor and you got yourself a makeshift tank
max de heer u could say that about a car
That would be an awesome project!
Very cool, but man I would use a bunch of lockwashers and whole container of loctite on that thing. Seems like as is it'll be rattling apart every hour.
DONT DOUBT THE FURZ
John Ridley
I think he built it first with normal nuts as they are handy to take off
I think he took it apart again to paint then rebuilt it with locknuts
safety on go-karts with Colin Furze!
No now is time for the welder.
who naeds' bauy an engine, YU can maek it yesalf!
Johnmadara nice English
I'm pretty sure he's mocking Colin's accent
What? No one mocks the Wizard Colin!!!
Hids like orkadian min
You should write a book mate mate! Not many authors on the subject 👍🏽 great work
4:46 I'm colourblind
Well blue will just be green for both cables
Just the colour with the same colour
just get someone else to do it lol
Get an app for your phone that will tell you what colour is what.
colorblindpal.com/
I'm pretty sure in the next 10 years this man will fly off to jupiter in a nuclear powered rocket ( All DIY )
And all recorded
All without a welder
"safety people" - Then goes for a test drive in a shirt and tie and no helmet.
you mean safety tie?
good no need for uk safety on a slow cart for a test i hope your kidding
He was wearing the safety tie.
And no seat belt or harness
And the kill switch behind the seat lol
I like how you don’t put How To Make, because I bet 90% if the people here don’t know what your talking about, but we like it that way!
How fast will it go
Around 40 mph
Wait, so you built it, and then TOOK IT APART AGAIN just to paint it? XD
yes, that's the normal course of action when you built a custom bike or custom anything. Otherwise, you make changes while it's painted and have to repaint parts of it anyways
Well its just stupid to paint parts befor the whole project is done, same with cars you don't paint sertain parts when you done with them, you paint it when everything is in place and works as it should. its waste of material if you paint then end up scratching it when building it and if the parts are wrong well guess you hafto paint another one as well.
I think melig1991 was just thinking what I was, which was to just run a rattle can over it whilst it was still together :P
I know, I know THE BOLTS!!! :D
Clearly you're not an engineer hihi.
melig1991 When building from scratch, you always test & dry fit all joints, controls, wiring, etc, any jackass knows this....
Colinfurze looks like Gordon ramsey
1 yr later but I know bro 😂
one day I promise myself I will build this, great project.