We recently lumbered a 36" maple, a 36" white ash, and a 32" pecan. After drying, we tried planing with a Rigid (Home Depot) 13" planer with 2 HSS knives ruclips.net/user/postUgkxIzvvTi3_Qc8JnVdYYRJCvuoDC4QjTzeL . This job was clearly too much for that machine. The pecan was particularly difficult, due to heavy mineral deposits, and a sharp pair of HSS knives would be consumed by a mere 3 boards. We were also having lots of problems from chip bruising, due to poor dust collection. The shavings came off like straw and jammed in the 4" hose.We bought the DW735 simply to be able to run carbide blades, which worked brilliantly for the pecan. However, we found it to be a much, MUCH nicer machine. It was far more rigid than the "Rigid" planer, and far more accurate as well. But what I liked most about it was the dust feed. This machine has its own blower, which shreds the "straw" like shavings as they come off the cutting head and helps boost the shavings into the dust collection system. No more clogs! It's also nicely sealed so that the internals stay quite clean. This is just a well tempered machine that's a delight to use. It literally cut the labor in half. Just another example of getting what you pay for.
Very similar to the Bosch, the Bosch has the edge though as blade changing is quick and easy and diverting the shavings is with a lever, very user friendly. The Bosch has only one blade, the Bosch GHO 40-82 is the model I'm talking about, I think it can be got with and without electronics, have to check that if buying. Electronics will give you soft start and constant speed under load and slow the motor under no load to prolong bearings. The Makita is a good machine though.
only here because someone shipped this to our address and we're trying to figure out what the heck this power tool is. does it saw wood? does it shave it?
We recently lumbered a 36" maple, a 36" white ash, and a 32" pecan. After drying, we tried planing with a Rigid (Home Depot) 13" planer with 2 HSS knives ruclips.net/user/postUgkxIzvvTi3_Qc8JnVdYYRJCvuoDC4QjTzeL . This job was clearly too much for that machine. The pecan was particularly difficult, due to heavy mineral deposits, and a sharp pair of HSS knives would be consumed by a mere 3 boards. We were also having lots of problems from chip bruising, due to poor dust collection. The shavings came off like straw and jammed in the 4" hose.We bought the DW735 simply to be able to run carbide blades, which worked brilliantly for the pecan. However, we found it to be a much, MUCH nicer machine. It was far more rigid than the "Rigid" planer, and far more accurate as well. But what I liked most about it was the dust feed. This machine has its own blower, which shreds the "straw" like shavings as they come off the cutting head and helps boost the shavings into the dust collection system. No more clogs! It's also nicely sealed so that the internals stay quite clean. This is just a well tempered machine that's a delight to use. It literally cut the labor in half. Just another example of getting what you pay for.
Makita sempre na frente
Trimakasih ini sangt mmbantu bgi kami
Very similar to the Bosch, the Bosch has the edge though as blade changing is quick and easy and diverting the shavings is with a lever, very user friendly. The Bosch has only one blade, the Bosch GHO 40-82 is the model I'm talking about, I think it can be got with and without electronics, have to check that if buying. Electronics will give you soft start and constant speed under load and slow the motor under no load to prolong bearings. The Makita is a good machine though.
Yes BUT, the Bosch is only 850 watts, this Makita is 1,050 watts, that is 23% more, and the Makita is noticeable quieter...
Is it possible to purchase in nepal?
Waww.. mantap mbak.. brapa harganya mbak, sudah ada di pasaran apa blom..?"
mantap,
It is much better if the demonstrator can explain in more detail.
sila
Exactly the same power, blades and adjustments like in JCB so why pay more then £68? And u get dust bag too.
is it including a vacuum channel?
how mach price
maybe a video of the planer in use would be alot more helpful....
Bosh randha
I'd like to see it running too : it's important.
very easy to use
made in mana itu mbak..?"
very good
Available in Pakistan?
Good Quality machines, price place
You Guys Should Make More SmackCams
Yf
only here because someone shipped this to our address and we're trying to figure out what the heck this power tool is. does it saw wood? does it shave it?
This demo's about as much use as a chocolate teapot lol
Kidar milaga e masin
This must be a good planer, but nothing beats festool for precision
Kia price hai
Guánto é ou valor kpo 0810c power planer w444w eng
cek, harga,....
Naic
LOVE SUPER
Kitne ka hai Sir
ราคาเท่าไรคับ
How much price
जय माता दी
जय माता दी
Berapa hargayaas
Top chhale taman
haw mach price
How much price
Bao nhiêu vậy s
Renda kohtay pabo
I have a Black and Decker device I lost the belt I am looking for and did not find it Is any one of you helping me to get it KW 750 750w type 4
My provlem
Carbon
Mau banget yang itu
Ok
Ñ.diz o.preco
দাম কতো
ligar a maquina que é bom nada ....
Kitna damhai
How much cost
Nada demais
Não mostrou nada!
music is disgusting