2007 - 2014 Chevy GMC Truck Tailgate Camera Install
HTML-код
- Опубликовано: 27 сен 2024
- Parts linked in the description below!
Watch a full tutorial as a 2007 Chevy Silverado will have a brand new tailgate handle mounted backup camera installed to an aftermarket radio. We will be using the Ecoconut Safe Driving camera kit and integrate it to an existing aftermarket radio.
This video applies to GM Trucks such as Sierra and Silverado models or years 2007, 2008, 2009, 2010, 2011, 2012, 2013 and 2014. This video tailgate handle disassembly, camera wiring, and installation.
*Click here to see a helpful backup camera general tutorial: • Car Backup Cameras Exp...
*For the radio install Bench seat version of this truck, click here: • 2007 - 2014 GMC / Chev...
*For the radio install Bucket seat version of this truck, click here: • 2007 - 2014 GMC / Chev...
*Click here to see the license plate backup camera video: • 2007 - 2014 Chevy GMC ...
*For the front door speaker / tweeter install, click here: • 2007 - 2014 GMC / Chev...
*For the rear door speaker install, click here: • 2007 - 2014 GMC / Chev...
*Click here for the 5 channel amp and sub install on this truck: • 2007 - 2014 GMC / Chev...
If you have any questions, leave a comment below! Be sure to like and subscribe!
Backup Camera (Amazon Associate Paid Links):
*Ecoconut Tailgate Camera Kit: amzn.to/3SVWVjv
Other Parts Used (Amazon Associate Paid Links):
*Pioneer AVH-2500NEX Bluetooth Radio: amzn.to/3z8L9Ju
*Metra 95-3305 Double DIN Installation Dash Kit: amzn.to/2TNgGQY
*Crux Wiring Harness Adapter SOOGM-16 For Bose / Non-Bose Systems: amzn.to/2Rt0OCp
*USB / AUX Flush Mount Kit: amzn.to/2SYXEGS
*Metra 40-CR10 Antenna Adapter: amzn.to/3po1uWc
*Pioneer Microbypass: amzn.to/3cmvNaB
Disclosure: As an Amazon Associate I earn from qualifying purchases
Parts used linked in the description of the video!
Where do I purchase the smart harness for the in cab..
Thanks 👍
PERFECTLY done videos, can't thank you enough. Let's me know exactly what I'm getting into, with great explanations without fluff, great views, links in description, etc... Perfectly done!
I will be using this video to install my backup camera, though I don't have tge crossover hopefully it'll go smoothly 👍
Great video!
Great job brother 💯🔥
Way too much generalizing on routing the wire up through the dash into the radio compartment. That is ridiculous. WHAT CHANNEL IS USED TO GET THE WIRE INTO THE RADIO COMPARTMENT!!!!!!!!!!!!!!!!!!!!!
This is the second time you've had the exact same product as me
Amazons choice doing gods work
The guy with the truck b4 me used this harness but didn’t have any of those 3 wires red blk purple connected. So how did he use power?? I dropped the tailgate n now it says check connection on the deck but where is cld he draw power from??
Is it ok to tap the ground to the cigarette lighters ground??
The steering wheel controls also work with answering phone calls? I have the same model truck except it’s a 2011 Texas edition LT. appreciate the very helpful video.
I'm trying to figure out my eBay special that looks like your camera but it only came with red and black wiring through the tailgate. And only red at the head unit. Aka in my book as the pioneer! So do I have to ground my camera up under the bed and rear frame? Or do I leave it taped off under there and only connect the camera red wire in the dash to ignition on wire?
Is it possible to flip the image on the camera if a car is coming up from the passenger side of the truck it shows on the left side of the screen which is kind of annoying also when I back into a parking spot and the back of my truck moves opposite of the screen
Hi I have a question my camera wiring on one end has the plug for the camera but has two wires a black and a red. and the other side that connects to the radio has only the yellow rca with a red cable only that connects to the brown rca port my question is I don’t have a smart harness. Do I connect on the radio the red to the violet white cable that is the reverse trigger wire or to the red that powers the radio, and on the tailgate do I connect the red and black to the reverse light or how do I connect it I’m lost thanks in advance I wish I could upload picture for you to see it
Is the PAC 0S-5 considered a smart harness ? Just wondering
I have a question. I want to use the purple wire to run to my reverse light, do i have run a wire back my reverse light being the purple wire is so short, or try and find the reverse wire in the lume?
Hello, I wanted to ask a question because I am already desperate, I bought a tailgate camera for my 2007 silverado, I connect it to the radio and it tells me that there is no signal, I don't know what to do or if it is some problem with the settings on the radio...thank you
If you get a no-video signal, that indicates you are not getting power to the camera, or there is an issue with the video cable input. Check your connections, check to see how the camera is getting power, etc.
My 2010 has a center hole for the lock and i cannot find a replacement, not sure if there is a way to move it.
I tried to install this same camera and I got a black and green screen?
I decided to tap into the 12v adapter power underneath the air controls and using the RCA connector
Do I need to have the purple wire go anywhere??
Does the radio have an input for both rear camera and a front camera?
Just installed this camera, is there a away to adjust the camera angle or repossession the lines upwards
I don’t think so. I have the same and would like to see my ball for trailer lining up
You can open the tailgate and wrap the your tailgate cable on the latch and it will hold it in the right position where you can see the ball on your truck
Just bought the same camera and it only shows a black screen with the lines, what did I do wrong?
You and me both. Did you ever find a fix??
@@Roadking013 not yet
@@corncobbbhunting7082 I ended up figuring it out. The radio unit I was hooking it to has multiple options for input (cable,screen,camera) and I had to set them all to NTSC or something of that nature
@@Roadking013 So you just had to change some settings on the radio itself?
@@corncobbbhunting7082 for me, yes. I did have to follow the wiring set up for a different camera style but same harness for my particular radio to figure out where to tap the purple wire into as well
Do you make one without the lock in the tailgate?
We don't (we don't manufacture the camera), but they do. Most kits come with the hole already in it for a key, but some include a plug for it like this one: amzn.to/453vM4n
All I get after wiring everything up is a black screen…any ideas?
either the camera isn't getting power, or the RCA video wire isn't hooked up.
@@ProvoBeastAudio do you think it could be a ground issue?
Great video Guys! well done.. Can you adjust the camera position?
Hey thanks. Unfortunately, the camera manufacture doesn't allow for any adjustment.
Can you see the receiver hitch with that camera when you are backing up to a trailer?@@ProvoBeastAudio
Did they provide enough wire for a crew cab truck ?
This was also a crew cab, so yes.
Will this work with the stock 2009 denali screen?
Did you ever figure out if it works with that screen?
to check my load while driving i just shift into reverse doing highway speeds. be a man
You talk a lot!
lol that’s what I was thinking😂 I would rather that over someone who doesn’t explain tho!
Wow, the timing of this comment ...I just left a video because he talked a lot😂
Hi, I’m new to truck modding. I was just wondering if the Smart Harness is required for this mod or any other. Thanks
Damn I just realized my tailgate has no lock on it.
We've used this same kit with a non-keyed tailgate bezel, and just add crafted an ABS plastic blank to fill the empty hole.
Excellent work you made with video
Thanks
Hello, I wanted to ask a question because I am already desperate, I bought a tailgate camera for my 2007 silverado, I connect it to the radio and it tells me that there is no signal, I don't know what to do or if it is some problem with the settings on the radio...thank you
Can u put more links sir?
The products are unvailable:(
They are all working fine. If you are located outside of the USA, that may be the reason why they are not available for you.
Installed a backup camera to my pioneer dmh-1500nex. Camera works when I hit the button but not when I put it in reverse. Have the same smart harness. Any ideas why this would be happening? I have the ground and power hooked up to the cigarette lighter
I have the same issue. Let me know if you figure it out.
I bought this and I never paid attention, but my truck has a center lock on it. I can't find any bezel cameras or replacement bezels with a center lock. Very frustrating.
I have a 2012 Silverado LTZ . I have a Eonon radio and it automatically goes into reverse mode when I put my truck in reverse. Will I need to hook up any power wires or should I be able to just plug up the rca plug? My truck does have park assist sensors in the bumper but no back up cam.
You still have to power the camera like we did in the video. Our radio also has a smart harness where it cycles the radio to reverse when backing up. So no trigger needed, just power the camera either off of accessory or the reverse light power and ground wire.
Hello -- it has been a year! Are you still happy with the backup camera? Trying to get past the 1 star negatives on Amazon is what keeps me from buying one of these tailgate camera kits... The Ecoconut* Tailgate Camera Kit has a 71% positive and a 7% 1-star rating on Amazon with a lot of camera failures? Plus the camera is "riveted" onto the bezel so zero adjustment can be made? Lastly is there any chance that the factory wiring hraness is already in place but hidden away over on the driver's side junction box next to the spare tire? I have a 2012 LT extended cab with most all of the options including the "park-assist" sensors in the rear bumper... I am going to dig and see if there is a connector there for the camera harness.
I have a just about fully loaded truck like yours I looked for a factory connector and couldn’t find one