the fs-i6 has some modded firmware available turns your tx to 10ch plus other features! also a heads up ,if you do flash the tx firmware ,the irx6 will not allow you to to bind to any left stick(rudder) quads...here's a link to all the other quads that work with the irx6 module (NRF24L01) docs.google.com/spreadsheets/d/13d3yXNiElfA5R2XstsVYSLjc81iRwmZqtKesxeu-bPI/edit#gid=0 8.5 motors on a h8? guess you have the silverware flash on the h8?
They work really good, just a chame they dont work with the MJX protocol to fly the bugs... You will notice a huge diference in flying, better control by far... Great purchase Davo, big hug
HELP! 😭😭😭 I dropped my fs-i6 from my eachine novice 2 rtf kit and now it keeps giving the "make sure all switches are forward and throttle at 0" warning whenever it's turned on no matter what I do with the switches /throttle! 🥺🥺🥺😒😒😒 I did notice the handle thing at the top had cracked at bottom Rh side of it and popped open a touch along the length of it. I just undid the back screws and fiddled with it abit till it all popped in again, the super glued over the crack abit. But still does it! Any idea what I could do to fix it? Be much appreciated. Thx
Although I can bind my E010, I simply can't control it, It keeps binding/unbinding every few seconds and it has a huge delay between my commands and the drone. Any ideia on what might be the problem? Can it be because my FlySky FS - i6 is right Hand throttle and my drone comes with left hand throttle controller?
Hi, I’m new to this and would like to know what 1s battery you are using to power your module ! I have loads of batteries for my jjrc h36 but they are too fat/thick for the rangex module. Thanks for any advice.
You can use any 1sell battery, the stock battery from the H36 (3.7volts, 150mAh) will work great on this module... Just glue a bit of velcro to the back of the TX and on the batteryand you're good to go.... Hope it helped, all the best Bassy..
Donnie, today I remembered you my brother and I laughted so hard... I was flying my Bugs 8 on the usual field behind my house when suddenly out of nowhere I sent the drone against a pole so hard... I thought I destroyed the quad but thank God nothing happened, just a few scratches ... I remembered right away your Bugs 2 crash, eh eh... Brother in quads and in crashes, looool... Will upload the vid of that crash later today, big hug bro
I found an antenna on the back of a,satellite dish receiver. it's got the black casing and I took it apart. would that work for an antenna mod instead of the clover? I feel like its,a bit heavy. im thinking about modding the antenna on the camera..
I´ll send you a video showing how I soldered one of those on my all-in-one camera for my whoop, my e-mail is lcostapereira77@gmail.com, send me a e-mail and I´ll reply with a video as best as I can...
Even better, check out these videos ruclips.net/video/qcgh2SEeb10/видео.html ruclips.net/video/Us_Xf5XoFBc/видео.html If you take the outer part of that antenna you found, inside it´s a normal diapole antenna, you can solder it on your camera... If in your camera you have a connector on the back, you can solder it on the front... Hope it helps bro...
I'm not sure but I think it's not compatible with FRsky receivers, you can always put a micro FlySky receiver on it... Find the receiver pads on the board an solder red wire to 5v, black wire to ground and signal wire to SBUS...
I think its does but check out this group that has all the info about the irx6..... www.rcgroups.com/forums/showthread.php?2905531-iRangeX-iRX6-Multiprotocol-TX-Module-for-Flysky-FS-i6-i6x-Transmitter-FREE-TEST
Affiliate links do not have higher prices the president got hired just because it's an affiliate link the affiliate get the percentage of each sale in the prices are all exactly the same
Yeah none of the rudder commands work on mine seemingly I cant bind certain drone stick commands that involve the left stick rudder/yaw left or gith..nothing happens
You have to go to the settings and change the stick modes, maybe they are reversed... Go to menu; system; sticks mode and then change and test to get mode 2 like most transmitters... Hope I helped you with that, all the best and safe fights
Does anyone know how to make it change rates? My JJRC H36 has 2 modes (or rates) you just click the left shoulder button on the stick tx but I cant figure out how to do it on the flysky
I really dont know if it´s one of the shoulder buttons but I thinks it probably is, just put the quad in the air and start yawing at the same time you hit the buttons and try to see witch one changes the rate... Hope it helps ThatDamGuy, eh eh... Thanks for watching, all the best
oh amigo, eu não percebi... Achei k tinhas era um radio Fubata, desculpa... Vai neste link k tem lá as instruções do modulo, espero k te ajude... www.irangex.com/iRangeX-iRX6-Multiprotocol-TX-Module-for-Flysky-FS-i6-i6x-Transmitter-p-11.html
the fs-i6 has some modded firmware available turns your tx to 10ch plus other features!
also a heads up ,if you do flash the tx firmware ,the irx6 will not allow you to to bind to any left
stick(rudder) quads...here's a link to all the other quads that work with the irx6 module (NRF24L01) docs.google.com/spreadsheets/d/13d3yXNiElfA5R2XstsVYSLjc81iRwmZqtKesxeu-bPI/edit#gid=0
8.5 motors on a h8? guess you have the silverware flash on the h8?
Bro will I still be able to bind on bayang silverware toys if I update the firmware (10ch)?
@@dudesupreme191 not sure, you can factory reset it if it doesn't work though I'm pretty sure
just bought 2 of these modules for my turnigy i6 tx brother, cant wait to bind it to my toy quads now
They work really good, just a chame they dont work with the MJX protocol to fly the bugs... You will notice a huge diference in flying, better control by far... Great purchase Davo, big hug
Great Tutorial! Just ordered everything I need!! Kudos brother!!!
Good video
You Can Switch on acro mode with the iRange ??????
HELP! 😭😭😭
I dropped my fs-i6 from my eachine novice 2 rtf kit and now it keeps giving the "make sure all switches are forward and throttle at 0" warning whenever it's turned on no matter what I do with the switches /throttle! 🥺🥺🥺😒😒😒
I did notice the handle thing at the top had cracked at bottom Rh side of it and popped open a touch along the length of it.
I just undid the back screws and fiddled with it abit till it all popped in again, the super glued over the crack abit.
But still does it!
Any idea what I could do to fix it?
Be much appreciated. Thx
HY! own a 5889 rc helicopter g.t.model,I lost the remote,and please let me know if I can use Flysky i6. thank you
Although I can bind my E010, I simply can't control it, It keeps binding/unbinding every few seconds and it has a huge delay between my commands and the drone. Any ideia on what might be the problem? Can it be because my FlySky FS - i6 is right Hand throttle and my drone comes with left hand throttle controller?
Hi, I’m new to this and would like to know what 1s battery you are using to power your module ! I have loads of batteries for my jjrc h36 but they are too fat/thick for the rangex module. Thanks for any advice.
You can use any 1sell battery, the stock battery from the H36 (3.7volts, 150mAh) will work great on this module... Just glue a bit of velcro to the back of the TX and on the batteryand you're good to go.... Hope it helped, all the best Bassy..
That's my bro, great review brother and you know its a big like from me.
Donnie, today I remembered you my brother and I laughted so hard... I was flying my Bugs 8 on the usual field behind my house when suddenly out of nowhere I sent the drone against a pole so hard... I thought I destroyed the quad but thank God nothing happened, just a few scratches ... I remembered right away your Bugs 2 crash, eh eh... Brother in quads and in crashes, looool... Will upload the vid of that crash later today, big hug bro
Muito bom gostei do vídeo. Esse módulo é muito bom, estou querendo comprar um desses
is it possible to bind eachine novice ii with that?
And that with every drone?
Usou a bateria do h8 mini pra ligar o irx6 ??
What range do you get on this? I want to use it for FPV on MJX X600 hexacopter. I want at least 300m of range. What do most people get on this?
That's about it, 200/300meters and more then that you're risking failsave...
can bindings with frsky receifer
compatible with fly sky t6?
Modulo bind con protocolo dsm??
can't bind rx frsky d16/8 ?
aww man brother..i wasn't even subbed to you...i am now!!! Thanks for the vid brotha!!! ✌✌✌
You´re welcome Kev, anything I can help you with just leave a comment of send me a msg... If it´s anything that I know, you can count on me... Big hug
I found an antenna on the back of a,satellite dish receiver. it's got the black casing and I took it apart. would that work for an antenna mod instead of the clover? I feel like its,a bit heavy. im thinking about modding the antenna on the camera..
I´ll send you a video showing how I soldered one of those on my all-in-one camera for my whoop, my e-mail is lcostapereira77@gmail.com, send me a e-mail and I´ll reply with a video as best as I can...
e-mails not sending bro..try this then delete it..kbreton35@gmail.com 👍👍👍
Even better, check out these videos
ruclips.net/video/qcgh2SEeb10/видео.html
ruclips.net/video/Us_Xf5XoFBc/видео.html
If you take the outer part of that antenna you found, inside it´s a normal diapole antenna, you can solder it on your camera... If in your camera you have a connector on the back, you can solder it on the front... Hope it helps bro...
Does this still work on a FlySky I6 with custom firmware on it?
Hi do u no how to use this module to power a beebrain lite im thinking frsky d8 but no if its compatible with the fsi6 i have module
I'm not sure but I think it's not compatible with FRsky receivers, you can always put a micro FlySky receiver on it... Find the receiver pads on the board an solder red wire to 5v, black wire to ground and signal wire to SBUS...
could you tell me if it is compatible with Realacc R11, please?
I think its does but check out this group that has all the info about the irx6..... www.rcgroups.com/forums/showthread.php?2905531-iRangeX-iRX6-Multiprotocol-TX-Module-for-Flysky-FS-i6-i6x-Transmitter-FREE-TEST
Affiliate links do not have higher prices the president got hired just because it's an affiliate link the affiliate get the percentage of each sale in the prices are all exactly the same
Yeah none of the rudder commands work on mine seemingly I cant bind certain drone stick commands that involve the left stick rudder/yaw left or gith..nothing happens
You have to go to the settings and change the stick modes, maybe they are reversed... Go to menu; system; sticks mode and then change and test to get mode 2 like most transmitters... Hope I helped you with that, all the best and safe fights
Does anyone know how to make it change rates? My JJRC H36 has 2 modes (or rates) you just click the left shoulder button on the stick tx but I cant figure out how to do it on the flysky
I really dont know if it´s one of the shoulder buttons but I thinks it probably is, just put the quad in the air and start yawing at the same time you hit the buttons and try to see witch one changes the rate... Hope it helps ThatDamGuy, eh eh... Thanks for watching, all the best
I have done that, nothing changes
I have a JJRC H8 mini here, let me see if I can figure that out and I´ll come back to you on a bit...
Ele conecta com xk k110 com Futaba?
Esse modulo so funciona com o FlySky FS i6, para Fubata tens de procurar outro modulo msmo apropriado para esse protocolo...
Drone Lovers FPV eu tenho um fsi6, me referi se ele conecta com k110 por que ele usa protocolo da futaba
oh amigo, eu não percebi... Achei k tinhas era um radio Fubata, desculpa... Vai neste link k tem lá as instruções do modulo, espero k te ajude...
www.irangex.com/iRangeX-iRX6-Multiprotocol-TX-Module-for-Flysky-FS-i6-i6x-Transmitter-p-11.html
não consigo achar nada confirmando que binda com futaba s-fhss
would this also work on fs i6s?
don't think so its for Flysky FS-i6 i6x TX
vc sabe dizer se com esse modulo eu controlo recptores da frsky?
Esse não dá, apenas emparelha com os protocolos dos drones brinquedo, bayang toys, hubsan, eachine, etc....
@@DroneLoversFPV esse daria certo ? mas como instalar nesse rádio?
Papito, checka este video...
ruclips.net/video/m4Gc57gW3oQ/видео.html
He doesn't accept me.
รีโหมดตอลโทรยี่ห้ออื่นสามารถใช้ได้ไหม
โมดูลนี้มาพร้อมกับรายการโปรโตคอล (ยี่ห้อ) ที่ใช้งานได้ ... ขอบคุณสำหรับการสนับสนุน