im not sure if you will even see this, but what forks / what style forks do you have? i want to use the clip on handlebars like you have but im not sure what forks actually work like yours.
Hello thanks for the ride along brother I have a question for you I have a athina minaralli sport I don't know to about tuning I have a Chinese version minaralli and I took a brand new bottom and used a oylin vm20 carburetor that's what comes with the Chinese version minaralli but it's to rich and was killing my magnito coils and there the 12V coil my question what carburetor are you using and what size of jets any help would be appreciated greatly thanks i also subscribed to your channel
@@DirectCurrent4u do you think if your carburetor is giving your engine to much fuel it would be hard for the engine to burn which puts a strain on the power source the coil and that's why there burning out that's my theory cause there is know electrica short got a answer?l
@@mikemiller3303 Mike, I have never had an issue with a coil or stator going bad due to a motor running to rich. Usually, it would cause a spark plug to foul but will not affect your coil or stator. I would start with your jetting first. Start with your pilot jet get it to auto correctly and then work on the main jet WOT. In the meantime, you can check the arms on your stator and make sure you're getting at least 320+ ohms minimum. 315 to 500 is good. Hope this helps my friend. 👍
Good job. I'm currently building one. Almost done. Can't wait. Video coming soon🤘
I had the minarelli horizontal racing version on my scooter. Your bike looks scary fast. Sounds really good too👍🏼👍🏼
Awesome. Sounds like maybe a little clutch slipping
it actually is.
@@Toxic2Tfr saf time has to do that on my minarelli looking to go with a 70cc jug here got a balanced crank
@@sethowen3728 get a bigger carb aswell and make sure at least the exhaust port is widened
Nice build bro sounds good
Hey I just thought of some a minierlle with a yd100 bottom end
Yeah make a correct size spacer and find the slight larger minarelli cylinder
im not sure if you will even see this, but what forks / what style forks do you have? i want to use the clip on handlebars like you have but im not sure what forks actually work like yours.
Good video bro 💪You running the RMH minarelli racing pipe on that setup ?
What fork brake and wheels are you running if you dont mind? In need of upgrading my felt faker build.
Nice rip bud. Did you do any port work to that Athena and is that a stoke cylinder?
Hello thanks for the ride along brother I have a question for you I have a athina minaralli sport I don't know to about tuning I have a Chinese version minaralli and I took a brand new bottom and used a oylin vm20 carburetor that's what comes with the Chinese version minaralli but it's to rich and was killing my magnito coils and there the 12V coil my question what carburetor are you using and what size of jets any help would be appreciated greatly thanks i also subscribed to your channel
dude I'm having the same issue of my real vm20 blowing up magnetos with the stock pilot jet, and a 240 main jet
Carburators dont have anything to do with the Magnito or coil. They only supply fuel and air to the motor. 👍
@@DirectCurrent4u do you think if your carburetor is giving your engine to much fuel it would be hard for the engine to burn which puts a strain on the power source the coil and that's why there burning out that's my theory cause there is know electrica short got a answer?l
@@mikemiller3303 Mike, I have never had an issue with a coil or stator going bad due to a motor running to rich. Usually, it would cause a spark plug to foul but will not affect your coil or stator. I would start with your jetting first. Start with your pilot jet get it to auto correctly and then work on the main jet WOT. In the meantime, you can check the arms on your stator and make sure you're getting at least 320+ ohms minimum. 315 to 500 is good. Hope this helps my friend. 👍
@@DirectCurrent4u thanks for the info brother
what jets did you end up running in ur carb?
He’s not gonna respond to you 👀
Holy 💩, never knew
Worst skipping clutch I've ever seen