Really clean and purposeful. And I won’t even say that the wing is rice because it is a legit APR piece. I literally subscribed to your channel because you are doing to your car exactly what I want to do to my 2020 accord 2.0 T manual. Keep it up young v-tech Jedi, the force is strong with you!
Lucky. Mine were worn so flat I needed to use pliers to hold the bolts so I could remove the nuts. Looking at Professional Awesome titanium pucks for my next setup. Added bonus is sparks :D
Very nicely done. I have same year same color, just getting in to track driving, so it's cool seeing yours all raced out. Maybe some day! 😁. Keep at it 👍
Did you have any squealing after you installed your ACT clutch? I had the HD street with flywheel installed and it still squeals during engagement after 700 miles.
When you blew your head gasket where you still able to drive it?...did you have to turn your car off then back on to get rid of the check engine light to stop flashing? My cAr sounds like that on cold start only
@Gavin Danitz yea same here I was able to pretty much coast it to the next freeway exit...but I had to park and shut car off then start it again and everything seemed normal again...but now I get sputters every now and then at wot
@Gavin Danitz yea I have arp head studs on the way and I'm heading to ososick to change the gasket. For now the car will be parked. Probably won't be adding more power when it's all said and done 240-50ish is plenty power for me. Might even get rid of tsp 1 plus and just go back to stage 1 tune.
Honestly you’re probably fine on tsp stage 1 plus. A lot of people run that power without issues. I’m at 60k on my my motor and trans and headgasket has still been the only issue
Kuddos to you for changing the cylinder head bolts to studs. I'm sure you addressed the gasket as well. Impressed by the improvements that matter so far. Exterior modifications are really attractive. Good job!! I hope you get to your happiness level but you never will, hahaha. It's Tein!! Technology Inovation. Would you consider advice on the rear suspension setting? I would love to help you.
@@gavindanitz oh thanks, finally one of these car experts answer a question . It's so many on RUclips, race car drivers. Hey I have the hatchback . I got a front pipe "3. I was going to find somewhere to get a jpipe welded on just in case it drones. It will cancel out drone , I here it will make more power and make the sound louder up under the car. What do u think? I got both mufflers deleted and vibrant resonater
Really clean and purposeful. And I won’t even say that the wing is rice because it is a legit APR piece. I literally subscribed to your channel because you are doing to your car exactly what I want to do to my 2020 accord 2.0 T manual. Keep it up young v-tech Jedi, the force is strong with you!
Love this series.
Get pucks to protect the undersides of your splitter hardware. Guess how i know...
I’ve seen those before. Believe it or not, I’ve only had one or 2 light scrapes
Lucky. Mine were worn so flat I needed to use pliers to hold the bolts so I could remove the nuts.
Looking at Professional Awesome titanium pucks for my next setup. Added bonus is sparks :D
I installed those for a customer. They seem to work well
Video was put together pretty well and explanations were on point. W Video
Good 👍 ASS job Brudda ✌.
Very nicely done. I have same year same color, just getting in to track driving, so it's cool seeing yours all raced out. Maybe some day! 😁. Keep at it 👍
The build looks great!
Type R badge front and back is from 20-21' Type R? Or 17-19'
I think 17-19. The front badge part number is 75700-TGH-A01 and the rear is 75701-TGH-A01. The coupes use the front badge in both the front and rear
3:12 who did your tune after you got the Race MAF
Nvm you answered later in the video. Thanks
Love your Si bro it's really nice and unique 🤙🏼💯
Nice build! I just got one a few months ago. Definitely want more power
U much drive so fast with that wing 👍
Love it. Looks incredible
Build is 🔥🔥🔥🔥 i wanna see more content haha! Love it man!
Love the Gray!
Love it. Just like mine, except without the splitter. Haha
Did you have any squealing after you installed your ACT clutch? I had the HD street with flywheel installed and it still squeals during engagement after 700 miles.
I did not
I have the Rv6 BB turbo it's amazing Fbo custom tune by Drob
Jealous of your BB
I may have missed it but what wheels are those?
Enkei NT03RR
When you blew your head gasket where you still able to drive it?...did you have to turn your car off then back on to get rid of the check engine light to stop flashing?
My cAr sounds like that on cold start only
I only got a cel when there was a hard misfire at wot but it quickly went away. I was able to limp it to the shop.
@Gavin Danitz yea same here I was able to pretty much coast it to the next freeway exit...but I had to park and shut car off then start it again and everything seemed normal again...but now I get sputters every now and then at wot
It’ll only get worse if you don’t change it
@Gavin Danitz yea I have arp head studs on the way and I'm heading to ososick to change the gasket. For now the car will be parked.
Probably won't be adding more power when it's all said and done 240-50ish is plenty power for me.
Might even get rid of tsp 1 plus and just go back to stage 1 tune.
Honestly you’re probably fine on tsp stage 1 plus. A lot of people run that power without issues. I’m at 60k on my my motor and trans and headgasket has still been the only issue
You forgot the most important mod. Making it RWD. 😂
Kuddos to you for changing the cylinder head bolts to studs. I'm sure you addressed the gasket as well. Impressed by the improvements that matter so far. Exterior modifications are really attractive. Good job!! I hope you get to your happiness level but you never will, hahaha. It's Tein!! Technology Inovation. Would you consider advice on the rear suspension setting? I would love to help you.
Thank you. Really appreciate the input and any advice
Dope vids , cool upgrades . What’s your opinion on the ball bearing vs the normal one ?
From what I hear the ball bearing is really good. Much better spool time and better power band
Did you weld the diaphram in the CMC?
Yes actually I think so
what size tires is that? and also what size apr wing is that.
i love the build and im trying to make my si look like yours
255/35/18. Gtc200. Appreciate the love.
Did you need spacers to clear the brembros with the enkeis?
No. Many other wheels will not clear though
U gotta get hybrid racing shifter cables
I’ll check it out
what are the tire specs you are running?
255/35/18
so all i’m hearing is i shouldn’t mod my si
How much horsepower did you have before a tune? Before ktuner
Stock is 205 crank
@@gavindanitz oh thanks, finally one of these car experts answer a question . It's so many on RUclips, race car drivers. Hey I have the hatchback . I got a front pipe "3. I was going to find somewhere to get a jpipe welded on just in case it drones. It will cancel out drone , I here it will make more power and make the sound louder up under the car. What do u think? I got both mufflers deleted and vibrant resonater
I would stick with the basic bolt-ons. Easiest way to make more power is get a tune.
@@gavindanitz how much is dyno tune
It’s much easier and cheaper buy a ktuner or Hondata and get an off the shelf tune
Be cheaper to buy a stock Type R. Simple tune 360 HP. Don't even need to upgrade clutch.
Get rid of the Type R badges.
𝓅𝓇𝑜𝓂𝑜𝓈𝓂 😚
cool build!