Wow this is really cool! I’ll definitely give it a try because this is one of the best builds of the Ssg10 a3 I’ve ever seen, and in some way it resembles the m2010 sniper.
To lock it more, adjust the front scope riser back 1 notch, and then attach a picatinnt rail sling attachment to the rail where the receiver rail ends and where the handguard rail starts.
That’s a very nice job you’ve done, I just got myself the same rifle on black, and it definitely looks really nice with the handguard. Thanks for the tips
This is exactly what I want for the looks of an Airsoft sniper, but I also want the VSR10 platform. Seems like this gives me the best of both worlds! Thank you for showing this.
Would it be possible, you think, to drill some threads in the outside of the outer barrel and secure the handguard with the two screw holes at the front, at each side, using some grubscrews?
@@Winters11Nice, this is definitely the route I'm taking. Do you think this will eliminate it wobbling around the outer barrel? And thus eliminate the use of the spacer rings around the outer barrel?
how does the TDC 2.0 Pro will fit with this HANDGUARD? do will have space ? or it will be to deep into the handgurad design and the into the barrel to adjust the hoop ingame ? If you can answer it , I know it's a 1 YEAR OLD video, but I just got the TS2 Pro for my A3 and the Idea to change the handguard its appealing... but , the Mlocks and KeyMods, will be in the Space ? Looks good Kind Regards
Yes Indeed ! good question ! I was wondering the same thing? does the O.P. already upgraded for the hoop MOD for this SSG 10A3, looks to me, that using that handguard can be some how problematic for the install of the TS2 Pro . I install the Full Thrust from Them , but still have the Original Hoop adjustment and I have no problems with accuracy and reach power, I have planned to install a new lighter Mlock handguard but seems to be bit problematic for the TS2 Pro Install. Wonder if the OP can answer . That Colour its right on , I have painted mine with Camo and looks great. Cheers
Hi mate, it's a very important question. The fact this video have 1 year its not a problem at all, I am still rocking this bad boy with this hand guard. I haven't fit a TDC on this one specifically but have a friend that made this mod with my help, and he cited the TDC no problem. He needed to made in the side of the rail so he could reach the adjustment with its thumb. TDC its still protected by the rail and he still can ajust it in game. But all depends on the handguard model you are using. WORST CASE, you have to make a cut in the upper part of the rail, on the top picatinny, to make room for your fingers to adjust the TDC. But I think 80/90% of the handguards would fit with the TDC plus proper cut to reach it.
The whole gun, including stock, was black. The TAN version of the stock was not in the correct shade I wanted (RAL8000) so I prefer to paint everything from scratch. The whole gun and stock were disassembled to the last piece, and the components were painted individually.
It's the short version. The barrel always look long on this rifle because of the way the receiver look. It is very very short. It ends just after the mag. That's why the short barrel looks long and the long barrel looks huge.
can i ask wich hand guard did you got and from where ? cause i have tha SSG10-A3 too and mine is tan like your's but im finding problem on finding the right handguard
Hi there. Mine was not tan. It was initially black, as the hanguard was. I then painted selected parts pf the black rifle and the black handguard in RAL8000 color. This specific handguard was harvasted from a G&G CM15 15" that I didn´t use. But really any M4 / AR15 keymod/mlok rail would work. About the tan color, you will never match it with anything that is not made by the same company and in the same material. So, the best you can do is spray paint everything in the same shade. Hope this can help!
The weapon "per say" doest have a "effective range". It will largely depend on ammo and power output. I am using this with 1.3 joules (374 fps measured with .20gr, its the legal limit in my country for every airsoft gun) and I shoot .40gr to a human torso at 80 meters, with soft wind with relative ease. If you use a higher output power like 2.5 joules and .48gr I believe you can go a but higher than 100 meters, but I would have to test that to know exactly.
Wow this is really cool! I’ll definitely give it a try because this is one of the best builds of the Ssg10 a3 I’ve ever seen, and in some way it resembles the m2010 sniper.
It was my idea! Something in the lines of the M2010, MSR or AXMC. Hope this can help!
That thing looks soooooo freaking good. holy cow, that is one good looking rifle. I wish you sold these. I would never be able to do that.
To lock it more, adjust the front scope riser back 1 notch, and then attach a picatinnt rail sling attachment to the rail where the receiver rail ends and where the handguard rail starts.
It's already rock solid. But that's an idea for someone who does want to use only one support ring on the handguard.
That’s a very nice job you’ve done, I just got myself the same rifle on black, and it definitely looks really nice with the handguard. Thanks for the tips
This is exactly what I want for the looks of an Airsoft sniper, but I also want the VSR10 platform. Seems like this gives me the best of both worlds! Thank you for showing this.
Would it be possible, you think, to drill some threads in the outside of the outer barrel and secure the handguard with the two screw holes at the front, at each side, using some grubscrews?
@@roelfo I think yes, it would be possible
@@Winters11Nice, this is definitely the route I'm taking. Do you think this will eliminate it wobbling around the outer barrel? And thus eliminate the use of the spacer rings around the outer barrel?
I just sold mine, so I could buy an SRS. And now I'm regretting it, thanks to you :D
hey, the SRS is a great platform! Don't regret it!
how does the TDC 2.0 Pro will fit with this HANDGUARD? do will have space ? or it will be to deep into the handgurad design and the into the barrel to adjust the hoop ingame ? If you can answer it , I know it's a 1 YEAR OLD video, but I just got the TS2 Pro for my A3 and the Idea to change the handguard its appealing... but , the Mlocks and KeyMods, will be in the Space ?
Looks good
Kind Regards
Yes Indeed ! good question !
I was wondering the same thing? does the O.P. already upgraded for the hoop MOD for this SSG 10A3, looks to me, that using that handguard can be some how problematic for the install of the TS2 Pro .
I install the Full Thrust from Them , but still have the Original Hoop adjustment and I have no problems with accuracy and reach power, I have planned to install a new lighter Mlock handguard but seems to be bit problematic for the TS2 Pro Install.
Wonder if the OP can answer .
That Colour its right on , I have painted mine with Camo and looks great.
Cheers
Hi mate, it's a very important question. The fact this video have 1 year its not a problem at all, I am still rocking this bad boy with this hand guard. I haven't fit a TDC on this one specifically but have a friend that made this mod with my help, and he cited the TDC no problem. He needed to made in the side of the rail so he could reach the adjustment with its thumb. TDC its still protected by the rail and he still can ajust it in game. But all depends on the handguard model you are using. WORST CASE, you have to make a cut in the upper part of the rail, on the top picatinny, to make room for your fingers to adjust the TDC. But I think 80/90% of the handguards would fit with the TDC plus proper cut to reach it.
Did you paint the A3 Stock yourself or did you buy the stock that already comes in this color?
The whole gun, including stock, was black. The TAN version of the stock was not in the correct shade I wanted (RAL8000) so I prefer to paint everything from scratch. The whole gun and stock were disassembled to the last piece, and the components were painted individually.
It's beautiful - big thumps up for the handguard :O !!
This is exact the modification I been finding for year! may I also ask what is the brands for the handguard tho, when I want to have the best fitting
First off, Awesome build!! That is a great idea.
Just wondering, what brand paint did you use?
@@TopBuilder. thanks for the kind words! I used Fosco branded paint.
@@Winters11 Thanks for the info. Do you happen to know how many cans it took?
@@TopBuilder. only one is more than enough!
Is this the long or short version? The barrel looks pretty long in comparison to the rail system. And is it still working well for u
It's the short version. The barrel always look long on this rifle because of the way the receiver look. It is very very short. It ends just after the mag. That's why the short barrel looks long and the long barrel looks huge.
Awesome thank you, and where did you get the scope risers to match
@@viper7753 In a local store, in Portugal.
Did u use spray paint?
Yes. The "Dk Gelb" from Fosco. Its their Ral 8000.@@viper7753
can i ask wich hand guard did you got and from where ? cause i have tha SSG10-A3 too and mine is tan like your's but im finding problem on finding the right handguard
Hi there. Mine was not tan. It was initially black, as the hanguard was. I then painted selected parts pf the black rifle and the black handguard in RAL8000 color. This specific handguard was harvasted from a G&G CM15 15" that I didn´t use. But really any M4 / AR15 keymod/mlok rail would work.
About the tan color, you will never match it with anything that is not made by the same company and in the same material. So, the best you can do is spray paint everything in the same shade.
Hope this can help!
@@Winters11 thx I appreciate I will try to match the novritsch tan color I really like it
Is the folding stock on the A3 sturdy or will it break?
I've heard it should be very sturdy!
Do you already have the 3D printed Models for the rings?
The amazing rifle
Thank you, mate!
What hand guard did you use? I want to use the same one.
That very Nice ! Do you have the part fort the rings for the barrel ?
You should have utses the maple leaf upper reciever rail. Then the picstinny would align better
I need a blueprint sir!
What is the effective range of this weapon? 80 meters
The weapon "per say" doest have a "effective range". It will largely depend on ammo and power output. I am using this with 1.3 joules (374 fps measured with .20gr, its the legal limit in my country for every airsoft gun) and I shoot .40gr to a human torso at 80 meters, with soft wind with relative ease. If you use a higher output power like 2.5 joules and .48gr I believe you can go a but higher than 100 meters, but I would have to test that to know exactly.
awesome bro..👏🏼🙌🏽
is this the long barreled version?
Short version!
Hey! I have the same gun, and this is simply the most beautiful mod I've ever seen, how could I replicate one exactly the same?
PS: You are an artist
Thank you for your kind words! Follow the video to make the mod. If you have any doubt, just shoot it to me!
You did a great job, my friend. I want to paint my own a3 too. the color is great. Is the color code RAL8000?
Yes, this is RAL8000! Thanks for the kind words!!!