Это видео недоступно.
Сожалеем об этом.
Top CPAP Cleaners of 2021 - The Safest and Most Effective
HTML-код
- Опубликовано: 16 авг 2024
- Learn why we think that these are the best CPAP Cleaners available on the market today. With years of experience in the industry and tons of experience on CPAP Cleaners specifically, we think that we can bring a unique and valuable perspective on options for you. We compare the Sleep8, the SoClean and the Liviliti Paptizer CPAP Cleaners. As always we appreciate your comments with questions or additions. Use the links below to learn more about these specific cleaners or to browse all of the options that we have. Additionally, we go over the FDAs comments on the safety and effectiveness of CPAP Cleaners.
Sleep8 CPAP Cleaner
cpapmyway.com/...
SoClean CPAP Cleaner
cpapmyway.com/...
Liviliti CPAP Cleaner
cpapmyway.com/...
All Cleaners
cpapmyway.com/...
I work at a DME as the cpap/bipap specialist and I've personally seen devices destroyed by the So-clean ozone cleaner. The most obvious problem is the seals get hard and stop sealing then sensors start going out like the ones related to the auto-on and auto-off modes. Machines might start turning off automatically at night or will need to manually have the machine turned on to start therapy rather than putting the mask on. We sent 2 off for repair under warranty. One was light enough on the damage that ResMed repaired it but the other one had extensive seal damage, corroded circuit boards, and pneumatic block damage. On the other hand, the only complaint I received concerning the Sleep 8 is that it wouldn't turn on unless they pushed it onto the port "really hard". Elderly patient so go figure.
Thanks for the input. Super helpful.
I have used SoClean for five plus years with my Respironics machine and have had no issues. I still replace mask , hose, filters regularly. No irritation, or respiratory problems from residual ozone. I feel California tends to over react to everything including ozone CPAP cleaners my $.02
Thank you for the real world experience.
Ditto! I bought my SoClean within a month of receiving the Phillips Dream Machine (five years ago) and I have not had a problem with either. I clean my tank, hose and mask once a week, and the other 6 days I use my SoClean. If it is available, I will buy the same cpap machine in the newest model when I'm eligible for a new one. When the SoClean quits, I'll buy another. Add my two cents to the above.
@@ggpatt7795 Thank you for the feedback.
The problem with the soclean is that it will void your warranty on your CPAP machine. Because the ozone residue gets on the motor inside your CPAP machine. Once they see that, they won't replace your CPAP machine. I don't understand why they never talk about that. I use the Sleep8 which would not void your warranty.
Great point on that.
I hated the nightstand real estate and the look of having a medical device on my nightstand (lacks romance lol) soooo. I used a hole saw to put a plug thru the back of the nightstand and everything is now in the drawer. wala! Great reviews and thank you I love my ResMed mini and use it as my only device.
Thanks for the great input!
I've been using a CPAP for around 15 years. Rarely do I clean the parts. Never had a problem. I live in an arid climate so mold is not an issue and I don't use a humidifier. I've had 3 Remstar, one of them being recalled. I've been using my backup that wasn't recalled and finally decided to buy a Resmed and because the humidifier is built-in started using the humidifier. Now I'm looking into cleaners and after watching this I think I'll just start using wipes. All bacteria is not bad and why do we think this is going fix things? I use a whole room cleaner that has to have it's filters changed about once ever 6 mo.
Bottom line, none of these machines clean the CPAP, just the hose and mask. Ozone is not a good substance, and not sure how much of the UV light will get inside the tube. My wife has an ultrasonic cleaner, which would require a little disassembly to get the Nasal mask in, but it might just do the job. Good luck and good sleeping!!
Thanks for the input.
⚠My NEW CPAP (replaced my 7-year-old machine, worked like a tank - but a power-surge zapped it😢) in the User Manual specially states, and my DME pointed that out when I received the new machine, that the use of Ozone thru the machine will void the manufacture's warrantee... check your CPAP user manual before you use the integrated units.
BTW: Neither the ozone nor the UV cleaners will remove the facial oils from the cushions, you still need to clean those with some sort of soap/detergent to remove those oils - unless you like skin issues.
Thanks for the input.
If the liviliti does 'not' clean the inside of the tubing.....why would I even consider it as a 'cpap' cleaner? The tubing is a main portion of the cpap system. Just saying. Thank you for the indepth review. It really helped cement my decision on which cleaner to purchase.
Glad that we could help you pick out your cpap cleaner. Thanks for the input.
Du-huh. The bacteria is inside the hose. UV light would not sterilize (not clean) that. liviliti seems like a useless otpion. Also, people keep using the word 'clean' when they should be using 'sterilize'. None of these machines will clean cpap equipment.
A caution with the So Clean is you have to unhook the black hose to remove and fill the water chamber from a Resmed. If you forget to re-hook the hose you get a flood.
Great input on the SoClean. Thank you.
Steve R: No you don't. You can purchase the SoClean lid adapter for your Resmed and simply place the hose and face "assembly" into the SoClean and turn it on. The O3 will go into the water and through the inside of the hose.
The main problem is the internal Resmed seals that, supposedly, get damage from the O3 which is why Resmed won't only the warranty if they determine that any of their machines were damage in that way.
I just started using a CPAP machine two weeks ago and have been watching and learning from these great videos. I like the Sleep 8 because my wife may be using a CPAP machine in a couple of months and it looks like the easiest to use for both machine. The LED UV model also looks interesting but I noticed there are many models promoting the same results. Have you tested any of them?
We have only tested the ones that you see here.
Personally, and with my background as a biologist, I don't support any of the products you are reviewing/peddling. In my view, the best way to clean CPAP equipment is the more time consuming, old-fashioned way. First, wash the equipment, hose, mask and humidifier in warm water with Dawn; use a hose brush to clean the inside of the hose; rinse completely and then use the Hurricane CPAP dryer to dry the mask, humidifier and the hose. The Hurricane dryer has a built-in attachment for the hose. Your product review makes no mention of how they remove the grease from your face or how they clean mucous, saliva, etc. from your mask. The old-fashioned way i describe above does all that and more. Yes, it is more time-consuming but, as the saying goes, 'you reap what you sow'.
Thanks for the input.
I'm with you plus a good soak in vinegar water weekly
@@carolynbaranowski3682 Thank you for the input.
“You reap what you sow”, great quote! Haven’t heard that for quite some time.The advantage of a UV unit is that it can also be used to disinfect N95 face masks so they can be reused. These masks unfortunately can’t be washed without destroying the mask’s efficacy. I’m in health care and availability/supply of N95s is a real problem, even in August 2021.
@@user-fl5lr1nm5v PPE sterilization is a great use for the UV CPAP Cleaners. We have had a lot of businesses order them for that purpose.
I have used my SOCLEAN2 for 8 years, I run it for 5 minutes before using it as it says in the instructions. I have not had a problem. I love knowing that my machine is sterilized.
Thanks for the feedback.
My main question is what about the inside of the CPAP machine itself? I have a ResMed CPAP and I clean with soap and water. Using this method cleans the hose, mask, and tank but not inside the machine. I have always felt there must be areas inside the machine that can get mold or bacterial growth that can't be cleaned using soap and water. Is this a legitimate concern? If so it seems the only viable option would be the SoClean? Is it possible to put the entire machine inside the Sleep8 bag and run ozone through it?
You actually should not have to clean the inside of the CPAP machine itself. The only parts needing cleaning would be the humidifier chamber, the tubing, the filters, and the mask.
The machine you just clean with soap and water and change the filter that's all tho
Regarding the Sleep 8. You state in your video that you need a new bag every 3-6 months depending on the frequency of use. If using daily, 90 day change. Based on my understanding of how CO2 cleaning works, this logic seems sound. However it contradicts Sleep 8's official stance on the subject which is once you open the package the 90 day clock starts. I don't use the device daily and can't use it on my nasal cushions due to degradation. I use weekly on every thing else. No one from Sleep 8 has been able to provide a logical explanation on how the EFFICACY of this filter bag changes when it's simply removed from it's packaging. How did you come to your conclusion about the filter bag change cycles for the Sleep 8? Thanks for the video and hopefully a long awaited answer🤔
I will be honest. I am just using common sense and my understanding of Charcoal filters. Truthfully they may know something that I don't, but in most cases replacement procedures are more of a worst case scenario than a matter of necessity (my opninion of course).
Translated....SoClean might have been the ones that someone was looking at as part of the FDA's study. Seen these types of responses before from manufacturers. Doesn't mean anything per se, but would have expected more a replies such as those provided by Sleep8 and Liviliti.
Thanks for watching!
Very informative video. can you answer this question. I have had a SoClean unit for many years. I changed my filter and recieved an adaptor which no longer allows for the cleaning of the humidifier chamber on my Phillips dreamstation unit. Does SoClean provide any information to this issue?
SoClean is no longer going to supply the connectors that allow the Ozone to get in to your CPAP machine.
What’s the date for FDA meeting? Where can we see the studies? Anyone can shout out some product safety number...Let’s see the testing data and info to FDA and why they won’t back the products......or what modifications they won’t made to make these cleaners functional.
Great questions. But unfortunately I don't have any more info than what I shared on the video.
I have been using the Dream Station and SoClean for years the only side affect I notice was a discoloration of the headgear over time. What is your thoughts on the Phillips June 14, 2021 Recall on several CPAP machines including the Dream Station? Phillips claim the foam inside the machine is deteriorating and could enter the airway. Phillips is also claiming it’s because of using ozone cleaners. However it also seams rather fishy that Phillips launched their Dream Station 2 at the same time they issued the recall for the Dream Station 1! Please let us know your thoughts? Is this a serious recall or just a way to sell new CPAP machines?
I heard about that too.
Do you have a link to the recall? What is the remedy that Phillips is offering customers who own one or more of the recalled CPAP machines? Curious since I own a Phillips AirSense 10. Just found this video after my father had concerns of the SoClean 2 possibly degrading the plastic used on the face mask and as a consequence creating plastic particulates which could enter one’s airstream when in use.
I would expect if there is a recall there would be a free replacement whatever that may be.
I also have an airsense 10. They are not part of the recall per my respiratory therapist at Kaiser.
I use the Dream Station and the SoClean2, Philips recalled my dreamstation and replaced it. Took forever, but they did send me a new machine. They said it was safe to use until I got my replacement. I never saw the deterioration spoken of, but I did quit using the SoClean2. I recently bought the Liviliti Paptizer, using it for the first time tonight, but this video makes me think I wasted a couple hundred dollars if the SoClean2 won't cause my CPAP to be unsafe.
I do not see a updated video for cpap cleaners. And the sleep8 is discontinued. Am I right by assuming that the So Clean 2 and Liviliti Paptizer still your top picks ?
Yes we are set to update that video soon. There have been a lot of changes in the CPAP cleaner world.
I use an Airsense10 for Her machine nightly. My tubing is covered by a tube sock which keeps it warm and blocks condensation. Also have short foam socks on both sidesof headgear that touch my face. Is it necessary to remove these coverings before placing tube and mask in Sleep 8 bag? Also, how often should I wash CPAP supplies if using Sleep 8?
I wouldn't think that you need to remove the coverings. They should be fine in there. Clean the supplies at least once per week.
Can I insert my heated tube into the UV Liviliti Paptizer ? Should I clean the mask & Mask tubing first , then clean my Heated Tubing separately ??
You can put it all in there if it fits.
Please update for AirSense 11 as well. Thanks!
Will do.
Important question. I have the new resvent i breeze. I Just ordered the So Clean 3. Now I'm not sure it is compatible. Can you let me know and if it is what adapter will I need to use with the heated tubing. Thank You
hi, thanks for your infos. is'nt there a risk that haven't been mentioned? the device operation without a closed bag/container will blow ozon through the cpap out through the dust air filter where the cpap sucks in the surrounded air. so it might harm pets for example around the device running. or did i got somthing wrong in that point?
All the devices have safety measures to help make sure that they are used correctly to avoid this. Thanks for the input.
Just bought sleep 8 from your company.
Thank you so much!! Have a great day.
I am so reluctant to get another So Clean. On my third one already. Their warranty is good, but the door hinge broke within a year on my first one, then the replacement one broke within a few months despite......despite me being SUPER careful closing the lid each and every time. The third one broke again and I am meticulously careful with it when closing and opening the lid. I was so frustrated that I decided not to even contact them the third time since it broke so quickly. I just put the lid on and place a heavy weight on it to make sure it seals all the way around. No leakage or anything, but makes me concerned to get their So Clean 3 unit. I am not convinced that they have fixed their weak hinges. Has anyone else had this issue or have I gotten 3 defective units in a row? P.S. I have a Resmed Airsense 10, so the hose is nothing crazy or abnormally sized.
Thank you for the input.
I get mold in my water tank even though I drain it and let it dry every day. I have a resmed. The heated hose is clear so I'm wondering if the uv unit would sanitize the hose? Which would one you recommend for the resmed? I like the idea of the uv but want to make sure it all gets sanitized. Thanks.
The hose is tough for the UV cleaners. If you go that route I would recommend the liviliti, because it circulates the air as well as surrounds everything with UV really well. Link below to that one.
Liviliti Paptizer:
cpapmyway.com/store/cpap-accessories/cleaning-supplies/liviliti-paptizer-sanitizer
@@CPAPmyway
Thanks 👍🏻
Why was the Lumin Bullet hose cleaner discontinued?
I’m guessing because it couldn’t be used on heated tubing which so many cpap users have.
Does the UV cleaner replace washing the equipment especially the hose.
The UV does not do a great job on the CPAP tubing.
Bill B.. how do you fill the humidifier with water since it appears to stay connected to the CPAP unit. I have the same ResMed CPAP and take the humidifier out each morning. Thanks!
The humidifier should pull out the same even when you use it with the soclean.
Does the liviliti with the Uv light sterilize the inside tubing or is it only the outside? Please let me know.
It does not specifically do the inside of the tubing. That’s the main downside on that one.
I just bought the 59S it arrived today. Now I see that it does not clean the inside of the hose. I wish I knew this before I bought it.
Thanks for the input. Good Luck with the cleaner.
I have gotten mold in the area of my DreamStation that holds the water chamber because it stay damp. It appear the SoClean system would eliminate that problem whereas the others you demonstrated would not. Do you have any thoughts on this?
Yes the SoClean CPAP Cleaner should help with that issue. Link to SoClean below if needed.
cpapmyway.com/store/cpap-accessories/cleaning-supplies/soclean-2-cpap-cleaner-system
Do you empty your water chamber in the morning and leave it open to dry all day?
If not you might try that first. Some of these machines are very pricey.
@@anh06005 Air Drying the water chamber during the day is a great idea. Very helpful to keep the water chamber cleaner longer.
Also remember that the water chambers on the Dreamstation and Dreamstation 2 are top rack dishwasher safe. Current dishwasher detergents and the water temperature should sterilize the chamber.
I use a SoClean2 with my Dream Station 1. The SoClean circulates ozone through the water that is in the water chamber. I don't think it has any effect on the dryness of the chamber area, although if the water chamber is over-filled, it could blow over the top of the chamber during the first step of cleaning.
During the first five minutes of using the SoClean, the black tube that extends into the water chamber "bubbles". The machine buzzes fairly loudly and the light is red. After five minutes it stops buzzing and bubbling and the machine continues to quietly clean for the remainder of two hours. During this time the light is yellow. When it's ready to open and your mask & hose are clean, the light is green. I have been using the Dream Station and SoClean2 for five years and I love them both. It's time for a new CPAP machine and I am sad it can't be another DS1. The DS2 does not get great reviews.
I don't put my water chamber in the dishwasher because it seems to wear it out sooner. When it wears out, it gets cracks around the metal plate which leak. That would drip water into the space and possibly cause dampness. IMHO
Can I use a So Clean with my new Dreamstation 2? I can't see how it would. ThankS for all the info.
You can, but you would have to be using standard tubing (non-heated) and you would need to the generic humidifier adapter for the soclean. Link to that below.
cpapmyway.com/store/soclean-2-humidifier-adapter
I ordered the sleep8 based on your recommendation.. but the smell is so strong and nauseating that I have to let the equipment sit out for 3 days before I can use it again
Sorry to hear that. We have had very little feedback to that degree. Maybe it should be exchanged?
Can I use the SoClean on my DreaStation2CPAP Advanced
Removing size and cost as concerns, which would you consider the safest and most effective option? Is UV safer than Ozone?
I really can't comment on safety outside of saying, they should all be safe. According the people who make them and tested them. As far as the ones we like the best. We really like the Sleep8. It is really small, easy and effective.
@@CPAPmyway
That's the one I'm steering toward as I'm a truck driver. Though, I will soon be going home every night, therefore size will no longer be an issue.
@@CPAPmyway
I really appreciate the fact that you take the time to reply to your comments, that's quite admirable.
I did not see you put a cpap humidifier reservoir in the Liviliti UV cleaner in this video, or the one you made specifically for that cleaner. I'm assuming that means they don't fit in a way that would make cleaning effective. Is that a fair assumption? I am not particularly enthused about the ozone cleaners, mostly because they have fairly significant ongoing costs in the form of filters/bags.
I water chamber would fit in the Liviliti. Best to remove the top on it first if you put the water chamber in there.
I’m very concerned my cpap machine drew in airborne mold spores. Can I place the machine itself into the bag for the Sleep8 to kill off these mold spores?
You could connect your CPAP tube to the inside of the bag and the other end to the CPAP machine. Then it would run the Ozone through the CPAP. Keep in mind that it is not recommended to run it this way.
Do any of these sanitizers allow for a heated tube to be cleaned? I use an oxi ClimateLine heated tube.
SoClean does allow for heated hose with the proper adapter installed. Links to all SoClean Adapters below.
cpapmyway.com/store/index.php?route=product/search&search=soclean
How well will the LiViliti Paptizer sanitize my Resmed heated hose? Are any tests on this available?
It is not great for hoses. The UV will not penetrate inside the tubing.
Are they cleaning or are they just disinfecting? Do we really need these machines, or is cleaning satisfactory?
They are designed to kill the germs and junk that grows inside. You would still need to wipe down the mask from time to time to clean off sweat or residue. We use mask wipes for that part usually.
I have a Phillips CPAP, what is your impression of the Phillips UV-c Disinfectant box?
I am not aware of a Philips UV-C product. I will ask my Philips rep about that.
I just received a brand new heated hose. Do I need to wash it before I use it for the 1st time?
No you can use it without washing.
can you use a heated hose with the 59S
How are you? Is the CPAP cleaner KKCare good? Does it work with Resmed s9?
I am well. I do not know anything about the KKCare Cleaner.
Does it also work with iBreeze? And would you also need an adapter?
Yes. Any of these will work with iBreeze and do not require any additional adapters.
What is the deterioration effect of ultraviolet on the CPAP plastics over time?
I honestly would not be able to answer that. We have not had any reports of early deterioration of parts or pieces due to using UV CPAP cleaners
Same question I have. However, my concern is whether the activated oxygen used by SoClean 2 can degrade the plastic used on the face mask. Ozone degradation might be a possibility but have no definitive position. If you have an answer please send it my way.
@@Curious0189 Ozone will cause damage to plastic and silicone over a long period of exposure. However, the general use of the product will probably wear it out quicker. So the silicone and replaceable plastic parts will most likely be replaced long before the Ozone causes any damage. that is what we have experienced.
What about issues with phillips dreamstate c pap and the foam in the unit and the soclean 2
Philips says that Ozone is bad for the foam in their CPAPs and does not recommend an integrated ozone cleaner.
@@CPAPmyway
Resmed warranty is void w SoClean correct
If it is within the 2 year warranty period and they notice ozone corrosion in the CPAP then ResMed has said that they will void the warranty.
I currently have COVID. What is the best machine for killing this virus?
They are all supposed to kill viruses, but I am not sure what is the best for covid.
Can anyone tell me if the so clean 3 will work with the resvent CPAP machine? Do all Cpap machines require an adapter?
I believe that it will. however we have not started carrying them yet. So I can not say for sure. The Sleep8 has been a great CPAP cleaner for the iBreeze.
cpapmyway.com/store/cpap-accessories/cleaning-supplies/sleep8-cpap-cleaner
Do you have to empty the water out of humidifier before using the So Clean 2?
You do not. The SoClean can run with water in the Humidifier Chamber.
@@CPAPmyway Would running the SoClean 2 with water inside humidifier chamber result in ozone being trapped inside the water more readily? I ask since the FDA issued out a notice to consumers that ozone producing CPAP cleaning machines were found to result in higher than recommended levels of ozone inside CPAP machines even after cleaning was completed. As a result, it was recommended to run CPAP machine 10 minutes without use prior to putting it on to go to bed. Even then some cleaning machines still resulted in higher than normal levels of ozone when tested. So I’m wondering if the water would inadvertently aid in entrapping the ozone molecules inside the water? I’m not a chemist so let me know your thoughts.
@@Curious0189 Well unfortunately I am not equipped to answer that as well. None of the manufacturers have indicated that you must dump water prior to using the ozone, but I have no idea if water could potentially hold ozone.
Why don't you mention anything about pricing? You can give a round about price that would be helpful.
I agree but the pricing changes on items frequently. So we put our links in the description so that you can see todays accurate pricing and availability. Here is a link to those CPAP Cleaner items.
cpapmyway.com/store/cpap-accessories/cleaning-supplies
Can you tell us about the SoClean lawsuit that is going that claims that it omits carcinogenic pathogens?
I am not aware of that.
What adator would you use for the new dream station 2 with the so clean
We will have a video out on that very soon. Thank you for the question.
what is ozone ? in relation? pleaese can you explain I've never heard of it
Ionized Oxygen or O3.
@@CPAPmyway thank you is it in my cpap machine naturally or is it just from the cleaning machines?
@@tas655 it is created by the CPAP Cleaner. Then filtered back to regular oxygen after it runs through on these two particular CPAP Cleaners.
How do you connect the soclean 2 to the New Resmed 11 ?
From my understanding there is not an adapter for the SoClean to the AirSense 11 CPAP. We have not seen one yet. If you are using the standrd CPAP tubing instead of heated then you can connect with the standard SoClean connector.
I don't understand why the inability of a CPAP cleaning device to blow ozone into the machine itself is a good thing. If you clean every other part of the system, but don't clean the inside of the air pump, that's like never cleaning the inside of your furnace and air ducts of your home. I understand that ozone isn't good to breathe and therefore you would not want a machine to leave ozone in your air pump, but what is wrong with a system that would blow ozone into the air pump (maybe while the air pump is running) and then run ordinary household air through it to "rinse" out the ozone. I would do that in my garage, for instance: Once a week, I'd just put the cpap and the cleaning machine in a plastic tote, bring them out to my workbench in the garage, let them do their ozone thing and expel that ozone into the garage, and bring them back into the house knowing all parts of my machine are clean.
Ozone is corrosive and would eventually cause damage to parts inside of the CPAP after long term use. Those parts are not easily replaced and that is why most manufacturers are asking cpap users not to run Ozone inside of their CPAPs.
How can I find out if my warranty is still on my machine
You would have to check your serial number with the manufacturer.
Is the soClean able to clean the DreamStation Go?
Yes, but you have to use the standard SoClean adapter. It will plug on the front. Then you have to use standard tubing instead of the DreamStation Go tubing. This is because the DreamStation go tubing has a special connection.
Can the Liviliti Paptizer CPAP work with CPP hoses?
It can help, but does not fully sterilize the inside of the tubing. You should check out the HealthyHose tube. Link below.
cpapmyway.com/store/disposable-cpap-parts/tubing/healthyhose-antimicrobial-cpap-tube
The instruction for my CPAP machine says using ozone cleaners voids the warranty
Yes that is something to consider. Any Ozone CPAP Cleaner that integrates into your CPAP can cause internal corrosion and will probably shorten the life of the CPAP. There are Ozone cleaners (like the sleep8) that do not allow Ozone into the CPAP at all.
@@CPAPmyway Correct me if I am wrong, but didn’t you stage in the video that SoClean 2 would stand by their warranty coverage if one’s CPAP machine were to be damaged through use of their cleaning product?
@@Curious0189 SoClean did say that they would cover the cost of repairs if ResMed voided the CPAP warranty due to ozone usage. They made this statement when ResMed issued a statement about voiding warranties of units damaged by ozone. I am not sure what their stance is present day.
@@CPAPmyway What is the typical life span of a CPAP machine? Just curious since we are talking about reducing the life span of the CPAP machine through use of Ozone cleaners. So just want a frame of reference to go by.
@@Curious0189 Most CPAP machines are designed to last 5 years plus. We have seen 15 year old CPAPs running fine though.
What is the opinion of clean zone unit?
That one is really new so we just don't have enough feedback to promote it yet.
What is the best for the dream station 2
We really like the Sleep8 CPAP Cleaner. It cleans everything separately from the CPAP.
Can the ibreeze resvent be use with soclean?
Yes here is a link to ho to attach the ibreeze to the soclean.
cpapmyway.com/blog/hookup-soclean-cpap
What about Respify CPAP Cleaner?
We do not have any experience with that model.
Is the ozone smell harmful when useing it after cleaning
The units that we carry have been tested to filter the ozone and provide no harm at all.
It takes a while to clear the ozone smell out of my gear after using my SoClean. I am concerned because recently, I have been told that ozone can aggravate my asthma. Any info on this?
So I don't need soap and water to clean anymore?
The automatic CPAP cleaners will help with that significantly.
What is your recommendation for the best unit? BTW, an independent lab from China is NOT to be trusted
We seem to have great feedback on both the Liviliti and the Sleep8. Both are very different on the pros and cons, so you would have to see which suited your needs best. Agreed on the Chinese lab trust, but it is all that we had.
Just because it's Chinese don't mean it's bad, there is literally xiaomi that's a good brand
What about the D6 sanibot?
I am not familiar with that one. I will look into it.
@CPAPmyway I believe it is the best out there in my opinion.... I just bought it haven't tried it... im new to the cpap world....been looking at all the reviews
@CPAPmyway, given the DreamStation recall, are these cleaners still recommended? I need something to clean 2 user's items.
Sleep8 is a great choice for that. LInk below.
cpapmyway.com/store/cpap-accessories/cleaning-supplies/sleep8-cpap-cleaner
Hi
Very informative about the CPAP cleaners. However, I was warned about using any of these cleaners by my doctor. Also, friends who are currently using their CPAC machines were also warned by their doctor. These machines are very hazardous to your health. They do not clean efficiently or get rid of bacteria etc. The best method is warm water and mild soap, soak for 30 minutes, use a towel for excess moisture and hang on a clothesline, no direct sun. WEEKLY clean your humidifier in 3 parts warm water to 1 part white vinegar for sterilization once a week. DAILY you need to clean your humidifier, air tubing, and mask cushion with warm soapy water and air dry on a towel. You do not want to breath bacteria, mold etc. This can cause havoc with your respiratory system. Their is no easy way. You need to clean everything DAILY and WEEKLY thoroughly.
Their is no easy way or method. When it comes to your health, their are no shortcuts. Your health is priceless!!
In health!!😊
PS: Thank you for all your informative videos on RUclips. I learned alot about the different masks. How to adjust them, air leaks, advantages and disadvantages.
Great input. Thanks for watching.
Which cpap machine can you use to blow ozone air into the machine to clean it inside?
The SoClean will blow Ozone inside the CPAP Machine.
Does Medicare pay for CPAP cleaners?
I do not think so.
No
No, it doesn’t, I have inquired myself
What about the lumin
Lumin is great. We have that in other videos.
Can you comment on soclean 2 vs 3?
So far we can not. We are hoping to have some units some time soon.
@@CPAPmyway If you do, I am interested in knowing if they have improved/fixed their weak door hinge issues. I am honestly SHOCKED that this hasn't been addressed. I am on my 3rd SoClean 2 machine in 4 years because the hinges kept breaking. The cover/lid is literally being held in place with two tiny pieces of plastic that is about the size of (width and thickness) of a popsicle stick. Even being meticulously careful, gentle with placing in the hose and headgear and opening and closing the lid, one of the hinges broke on all 3 units. I am using it correctly and super carefully. I do not place it in a place where sun can hit it......which would weaken plastic over time. This HAS to be a known issue. It doesn't seem possible that I just happened to get the only 3 units in the World that had this issue.
Can the Sleep8 be used for the heated tube? Does the head gear go into the bag?
Yes and yes. No adapters needed for the Sleep8. Even on the heated tubing.
@@CPAPmyway thank you
What’s wrong with soap and water?
Nothing at all. Soap and water is recommended by most manufacturers. However, the CPAP cleaners are the same concept as a dishwasher to us. No issue cleaning dishes with soap and water, but I can't imagine life without my dishwasher.
Does the equipment smell after cleaned with the sleep 8?
Every now and then we have someone that has an issue with the Ozone smell after use of the Sleep8 CPAP Cleaner or other Ozone CPAP Cleaners that we sell. However, it is not very often. So I would say that the smell is not significant.
@@CPAPmyway well I just ordered a sleep 8. Is ozone dangerous for me? And thanks for replying
@@garymiller7087 The safety features on the Sleep8 CPAP Cleaner make it safe.
So Clean yellowed my CPAP mask after a little more than a month of use. Yuk!!
Same here... That's one of the reasons that I stopped using it.
Which mask were you using?
@@Curious0189 Fisher& Paykel masks
I had the so clean 2, didn’t care for it
Thanks for the input.
My question is why don't you talk about each manf. instructions about cleaning? Do they say you need these machines? Because I manually clean my mask hose and humidifier bowl in a tub with hot water, Dawn, and an ounce or two of bleach and let it soak a couple hours and then dry. No problems and it's what all of you should be doing instead of listening to this propaganda and trying to get you to spend your money.
I completely understand the sentiment. However, bleach is never recommended by anyone. Light soap and water or light vinegar and water. The cleaners are there to help simplify the process, and are not necessary. Much like a dishwasher.
why not just clean with soap and water that's what we've been told by the NHS?
You certainly can use soap and water. That is what is recommended by the manufacturers.
I cleaned mine with soap and water and still ended up with a lung full of mold. Never again. I almost puked.
@@kimberly8185 Wow that sounds terrible.
@@CPAPmyway it was awful. My asthma didn't like it much either. I tell everyone.. buy the machine...
@@kimberly8185 Thanks for the input.
Ozone is extremely dangerous
Thanks for the input.