+J Nichols yeah but how many people do you know that repaint the exterior of the case with the same color just to make it look better vs. the interior of the case where there are lets say different areas where you can use different technics, like, how to make the paint resistant to scratches from the side panel or hdd bay etc. and stuff like that.
For the people who want more details, when dry sanding you go from a low (200) grid to higher to smooth it out. Clean it off and then prime. For the wet sanding use a very high grid one since you're not trying to go through the paint layer
+Darkknight aza Thanks. You will get to see the finished paint job in a future episode. Since we will be adding airbrush details, we couldn't apply the clear coat which is a critical step to the painting process and explains why we used just a panel.
6 years too late to answer this but the purpose of sanding initially is to create a consistent tooth for the primer to adhere to. The goal isn't necessarily to knock down the paint to the bare metal underneath, only to create a surface appropriate for priming.
What if we like the color on our case already, but want to paint a design on top. Would you still advise to remove the original paint, put a new coat of the color I want and then finish it with my design? Or would I be safe applying my design on top of the original paint?
I recently did a bodge job for an old pc i wanted to practice on. and i can say i did everything from having the job facing down to not using primer. anyone got any idea how long that job will last before it starts to flake off? (give it to me straight doc)
@@OcDmn Hello, im so glad you asked. 3 coats lightly done with 3 hour intervals, the job was done with masking tape over painters tape, gave me pretty good results. the paint has degraded a little bit with bits coming off but that is honestly me being a idiot when moving it around. job worked well.
I see lots of shadows in your finish coat. You should have sanded after the first coat and resprayed another coat before the clear. You make this FAR more difficult than it is.
General Harambe to my undestanding the coat just protects the paint from scratching off. If you want a matte finish there are coats for that. //sorry I’m 3 years late but if you’re the same kind of procastinator as me you probs haven’t finished it yet haha
What should I do if I only want to paint a section of the case? I want to paint a symbol on the center of the case but I don't want to sand the whole thing down and I want to preserve as much of the original metal as I can.
hello nice job and nice video. I would like to know how do I paint the plastic shell of an alienware area 51 7500 r3. someone from NVidia or any one else has some suggestions would appreciate it.
Tell us please, what happened to the brown paper and why not to use brown paper, having to then cover the back entirely in painters tape. These garage videos are a joke right?
+visionisscary You caught us. We couldn't just sit and wait for every layer to dry so we had extra panels ready to go. The advice still stands though- use painter's paper to use less painter's tape.
+NVIDIA Come on guys. :( If you couldn't, why should we? Be professional about it next time. Put an annotation on the video when you have switched that panel, for people not to feel like fools. Otherwise, great video. :)
+visionisscary if you couldnt figure out that it is just another way to cover the back exactly like he said in the start you probably shouldn't undertake any painting task.
Well ofcourse you can buy custom cases but it's quite expensive, but you can also buy tons of premade cases so if you dont really wanna have a crazy design just go with a normal retail case.
Man, the cameraman sucks, we're watching a how to, and the entire time he's showing us how to get even strokes we're watching the wrong side. He said if you don't do this you'll have to start over...
what if the paint i have is paint and primer do i still have to buy primer this is the paint www.amazon.com/Krylon-K09177000-COVERMAXX-Spray-Paint/dp/B013LT69JW/ref=sr_1_163?s=hi&ie=UTF8&qid=1474422348&sr=1-163&keywords=rustoleum+paint%2Bprimer&refinements=p_n_condition-type%3A6358196011%2Cp_36%3A-3000
by the time u spent on all these tools and spray paints and time wasted, u could of easily bought a nicer newer one selling the one u are trying to spray paint.
yeah, so exactly when he is applying the coat of paint/clearcoat thE camera guy gets a shot of the painter's...FACE. nice "tutorial" on how to spray paint . GREAT VIDEO....NOT !!!!
![Quando Rondo - Life Goes On [Official Music Video]](http://i.ytimg.com/vi/eIf3fhMXAow/mqdefault.jpg)
So you repainted the black case.... black....
White color is illegal these days...
+Tyler Tuthill it looks completely different from the original
+J Nichols yeah but how many people do you know that repaint the exterior of the case with the same color just to make it look better vs. the interior of the case where there are lets say different areas where you can use different technics, like, how to make the paint resistant to scratches from the side panel or hdd bay etc. and stuff like that.
Mark Tuc not sure what you mean
@@radarekxp Because that case would be called a RACISTS!
For the people who want more details, when dry sanding you go from a low (200) grid to higher to smooth it out. Clean it off and then prime. For the wet sanding use a very high grid one since you're not trying to go through the paint layer
I love how they forgot to film putting on the actual paint and had "fake" it.
Long story short someone in the building came out and demanded that we stop painting. So some creative solutions had to be done ;-)
@@Moddersinc1you work at Nvidia?
this should be a guide on how to spray paint anything. great video!
I would love to see a guide to paint the Graphics card! Hope you make a future episode.
+jyothish jithamanue Thanks for the suggestion!
+NVIDIA plot twist, you try to paint the heatsink with a heatressistant too :D
I actually painted my GTX 970 and made a video about it, if you want to check it out :)
I was just going to suggest Dietec! ❤
Why you shown metallic and clear coat steps stupidly from back side of panel?
+1
Awesome finish, I love these videos!
Turned a 2002 beige case into a black + aluminum design case. 💪🙏
"COAT HANGER"
get it?
Nice guide i but i was hoping to see the whole case painted
+Darkknight aza Thanks. You will get to see the finished paint job in a future episode. Since we will be adding airbrush details, we couldn't apply the clear coat which is a critical step to the painting process and explains why we used just a panel.
Although a brilliant concept, there is most certainly *not* the little guide hole on every aerosol spray paint can. Not on most actually.
What i find funny about this is you show everything but not how he sprays the parts wtf.
Great vid! I too have a video on my channel that explains how to custom paint your PC.
How much do I have to sand down before spraying? Do i have to remove all the coating from before or just get a smooth surface?
6 years too late to answer this but the purpose of sanding initially is to create a consistent tooth for the primer to adhere to. The goal isn't necessarily to knock down the paint to the bare metal underneath, only to create a surface appropriate for priming.
i love geforce garage, sorry for my bad fucking english
You see I wanna do this to a cougar conquer case..... that thing is a multitude of shapes and kinda undefined.
I want to paint an ROG logo on the side of mine, would that be about the same thing?
very informative. The modder in my approves
so cool! i love you nvidia
he said add paper to not waste tape, why did he cover the paper with tape?
I covered the overlapping edges, but if you see all the brown paper, if that was taking off you have to replace it with tape
@skogenburzum all the blue tape is painter tape, pretty sure that I did not use masking tape
Nice work!
Honestly Plasti Dip is soooooo much easier and honestly better in the end.
What if we like the color on our case already, but want to paint a design on top. Would you still advise to remove the original paint, put a new coat of the color I want and then finish it with my design? Or would I be safe applying my design on top of the original paint?
I think you need to put a layer of primer, and then paint your design.
Do I need a primer for white paint?
I want happy trees on mine. ^_^
10:34 the best part
couldn't agree more with you on that 🤣
Wow, you painted a flat panel with one color, what talent you must have.
What am I doing here? GO AMD! POLARIS AND VEGA!
This should be titled the basics of spray painting
I recently did a bodge job for an old pc i wanted to practice on. and i can say i did everything from having the job facing down to not using primer. anyone got any idea how long that job will last before it starts to flake off? (give it to me straight doc)
it's been 6 years, how was it?
@@OcDmn Hello, im so glad you asked.
3 coats lightly done with 3 hour intervals, the job was done with masking tape over painters tape, gave me pretty good results. the paint has degraded a little bit with bits coming off but that is honestly me being a idiot when moving it around. job worked well.
What if you want a matte style of paint job?
And I'm in more for interior painting, is it the same processes?
I see lots of shadows in your finish coat. You should have sanded after the first coat and resprayed another coat before the clear. You make this FAR more difficult than it is.
if I want a matte finish do I have to put on the clear coat ? .
General Harambe to my undestanding the coat just protects the paint from scratching off. If you want a matte finish there are coats for that.
//sorry I’m 3 years late but if you’re the same kind of procastinator as me you probs haven’t finished it yet haha
Is it the same process if you want to paint it white?
What should I do if I only want to paint a section of the case? I want to paint a symbol on the center of the case but I don't want to sand the whole thing down and I want to preserve as much of the original metal as I can.
Jericho Russo
Just mask it off with painters tape.
i am gonna build Nice, slick, Clean custom AMD Build watching this. XD
why didnt you paint something that actually needed painting like lets say the inside
I dont even have a case to paint, but im wishing
Sucks that the c70 is no longer available in white
So I cant use this guide to customise my amd radeon pc?
hello nice job and nice video. I would like to know how do I paint the plastic shell of an alienware area 51 7500 r3. someone from NVidia or any one else has some suggestions would appreciate it.
Tell us please, what happened to the brown paper and why not to use brown paper, having to then cover the back entirely in painters tape. These garage videos are a joke right?
+visionisscary You caught us. We couldn't just sit and wait for every layer to dry so we had extra panels ready to go. The advice still stands though- use painter's paper to use less painter's tape.
+NVIDIA Come on guys. :( If you couldn't, why should we? Be professional about it next time. Put an annotation on the video when you have switched that panel, for people not to feel like fools. Otherwise, great video. :)
+visionisscary if you couldnt figure out that it is just another way to cover the back exactly like he said in the start you probably shouldn't undertake any painting task.
What color did he use?
I expected a different color... oh well...
Me too, but I suppose having the same color makes it easier to compare the types of paint.
IS there somewhere to just go and get your case painted?
Well ofcourse you can buy custom cases but it's quite expensive, but you can also buy tons of premade cases so if you dont really wanna have a crazy design just go with a normal retail case.
At 0:36 I was expecting Dwayne The Rock Johnson.
oh im so going to do this
What is he using to get the old paint off?
I just used sandpaper ;-)
+NVIDIA teaching case modding.
Damn I wanted to paint my case but now I’m like idk 😅
Yeah this is a lot more than I expected.
How would I make it a matte finish?
+Knowledge = Performance same thing just buy matte spray paint and don't use clear coat.
Thanks
They sell matte clearcoat.
good thing I have a sand blaster and powder coater. much more professional.
+The Punisher Yes, powder coating is an obvious better option... if you have access to it.
+NVIDIA I bought my kit from Eastwood for 150$
Unless you want to die early, get yourself a proper painters mask. This guy is wearing a dust mask.
tiger striped that baby good. orange peel city
wat is those paper u was using them to polishh
pls
They say you can mod your geforce gtx pc so I'm guessing it doesn't work with an AND graphics card #AMDMasterRace
nvidia or AMD?
nvidia
a lot of colours and patrons on the earth and you use only one...
How do i mask of my case window?
Hadar Hardtmann. Take it out.
Isn't this the dude from Logitech G
I know I'm 8 years late, but you could've at least added some pattens on it man.
too much work to end up with almost the same color
7:09 ur welcome ;)
Why did they show a close up of his face when spraying on the paint? lol
He wasn't spraying.. They forgot to film the actual spraying and had to fake it
its really better if we could see how he painted it and not the painter painting it backwards
I guess NVIDIA didn't have the resources for a sand/bead blaster. Great info though, now I am prepared to give it a shot.
Actually, they did! But we wanted to show what to do if you did not have access to that kind of equipment
He should be wearing a respirator
You guys didn't even show him paint the damn thing what a bunch of crap
2:10 thought it was cheese
i thought the title was geforce garbage and i was so confused
Man, the cameraman sucks, we're watching a how to, and the entire time he's showing us how to get even strokes we're watching the wrong side. He said if you don't do this you'll have to start over...
holy crap so much work just to change the colour of one case panel :/
Yes but the more effort you put in, the better it looks
GOOD~!
Polaris > Pascal. grabs popcorn*
your popcorn mst be cold by now.. but thats not 9gag brah
or powdercoat it
10:35 his voice cracks
Inhaling paint is bad lol.
what if the paint i have is paint and primer do i still have to buy primer this is the paint www.amazon.com/Krylon-K09177000-COVERMAXX-Spray-Paint/dp/B013LT69JW/ref=sr_1_163?s=hi&ie=UTF8&qid=1474422348&sr=1-163&keywords=rustoleum+paint%2Bprimer&refinements=p_n_condition-type%3A6358196011%2Cp_36%3A-3000
by the time u spent on all these tools and spray paints and time wasted, u could of easily bought a nicer newer one selling the one u are trying to spray paint.
Lets paint a black panel to make it black 😂
10:34 voice crack
What
All that work to change black to a dark grey lmao
+Pippy319 Gun metal grey with metallic flecks!
why does he look so sad?
LOL voice crack 10:32 (no offense)
he showed use that he was going to use wax but then doesn't show us how to apply the wax then the final product clearly had wax on it.
Actually I did not apply any wax to the panel. That was just a few layers of the clear coat that gave it the shine.
NOOB,that panel it's full of orange peel.
Boop
yeah, so exactly when he is applying the coat of paint/clearcoat thE camera guy gets a shot of the painter's...FACE. nice "tutorial" on how to spray paint .
GREAT VIDEO....NOT !!!!
That was pretty bad
12.22 poop poop poop............................................poop
1st
You mean 2nd?
maybe 3rd?
these videos are kind of crap. much better to look at other youtuber's videos for this information.
and i learn nothing!
what a waste of time, so much work so little pay off.
At least change the color??!!
That hole is doing something to my soul