Thanks for video. When I do the regeneration and I'm driving it is flicking from active to not active all the time, I'd say it say not active for 90% of the time. Is this normal?
Thanks for the video! You did great job. Tommorow I'll try do the same. I have bmw e83 3.0d and already one week long I see DDE yellow lamp in my panel. Around 1.5 year ago I saw big grey smoke in my exhaust - it seems was automatic regeneration of DPF. But now I have just DDE signal. In the car service guys checked my car and said that my car have 3x times higher reactive pressure in exhaust system ( i guess they used INPA programm for this).
Great video, I've also watched a number of your other videos. Is there anyway to change the default stop/start, so that stop/start is switched off as default? Thanks in advance.
Mnoz Rai Dpf additives help to ignite the soot and burn it away. Most of them contain an oxide, that decreases the temperature at which the soot is burned away. If your dpf is heavily clogged though, you should consider to replace it, or remove it for chemical cleaning.
Miguel Almeida you have to start driving and keep driving while regenerating. In case you have to stop, the regeneration will continue the next time you start driving.
omenik321 regeneration usually lasts from 13 to 30 minutes. Even if you stop driving while regenerating, i it will resume the next time you start driving again. But i would suggest to leave the laptop on at least the first time, just to be sure that it doesn’t stop regenerating for some reason.
Guten Tag ;) schöne Erklärung! Schön! ☺ Schon mal jenes basische Aktivwasser aus so einem Wasserionisator schon mal getrunken? Dieses Wasser ist echt lecker! 😊 Was kann es? Also das musst Du selbst herausfinden... und Psst: Ist viel besser als Regenwasser . ;)
Mititelu Rares If you have an automatic transmission, engage D, if it is a manual one, drive normally. For optimum results try to keep a constant speed of around 80-100 km/h while regenerating.
Thanks for video. When I do the regeneration and I'm driving it is flicking from active to not active all the time, I'd say it say not active for 90% of the time. Is this normal?
Would have been helpful if you were explaining what are you doing in terms of ignition.
Do you switched ignition off when it asked for terminal 15?
Should you do all this with the engine running or start it later?
Is Molly Liquid Spülung good? I want to add it and later do the regeneration dpf
Thanks for the video! You did great job. Tommorow I'll try do the same. I have bmw e83 3.0d and already one week long I see DDE yellow lamp in my panel. Around 1.5 year ago I saw big grey smoke in my exhaust - it seems was automatic regeneration of DPF. But now I have just DDE signal. In the car service guys checked my car and said that my car have 3x times higher reactive pressure in exhaust system ( i guess they used INPA programm for this).
Great video, I've also watched a number of your other videos. Is there anyway to change the default stop/start, so that stop/start is switched off as default? Thanks in advance.
Hello,what if the error DPF doesn’t whant to erase and the regeneration its not starting because of that,what can i do????
4:23: ABL/FUB, how do you know?
do you know how to make gearbox adaptation for bmw f10 530d 2011 by ista d?
justyna perek i think it is under service function, power train, transmission control. I will check it out as soon as I return and post a video
it is up, check here ruclips.net/video/jxfxA24ZA4Y/видео.html
Hi tell me which version use.
BR
Thanks so much for your video. I could do it
Would you recommend adding any DPF additive in diesel tank while performing regeneration. Liqui Moly DPF Anti Clog or Enviro +DPF Cleaner? Thanks
Mnoz Rai Dpf additives help to ignite the soot and burn it away. Most of them contain an oxide, that decreases the temperature at which the soot is burned away. If your dpf is heavily clogged though, you should consider to replace it, or remove it for chemical cleaning.
It mean I have to use liquid to clean DPF , then use ista to regenerate it after clean. Am I correct?
john Fck wet it’s not mandatory, if it is heavily clogged you should remove it and do a chemical cleaning
@@MKAutoTech Thank for your reply
You need drive after request regeneration or only put engine on? Thanks
Miguel Almeida you have to start driving and keep driving while regenerating. In case you have to stop, the regeneration will continue the next time you start driving.
Has the laptop to be connected during whole process or could laptop be disconnected after clicking on start regeneration.
Sanjeev Joshi as soon as regeneration is requested, you can click on end service function, close operation and disconnect the laptop.
MKAutoTech but you had plugged in your laptop on video . Cause how I can know when regeneration is finished ?
omenik321 regeneration usually lasts from 13 to 30 minutes. Even if you stop driving while regenerating, i it will resume the next time you start driving again. But i would suggest to leave the laptop on at least the first time, just to be sure that it doesn’t stop regenerating for some reason.
Hi does it same process on F10 2011 535d please? Thanks
Ricardas Vasalauskas
Hi,
The process is the same
I have 004CAE error.. wat could be? N47 2.0
Hy can you plz make a video how i can turned of engine cheke aftter i delete my egr plz ✌️
Guten Tag ;) schöne Erklärung! Schön! ☺
Schon mal jenes basische Aktivwasser aus so einem Wasserionisator schon mal getrunken?
Dieses Wasser ist echt lecker! 😊
Was kann es? Also das musst Du selbst herausfinden...
und
Psst: Ist viel besser als Regenwasser . ;)
Hello.
How can i start forced regeneration if i have these errors: -480A -481A?
“the exhaust pressure is too high”
In what gear i should do regeneration? Thanks
Mititelu Rares If you have an automatic transmission, engage D, if it is a manual one, drive normally. For optimum results try to keep a constant speed of around 80-100 km/h while regenerating.