I jut ordered last night after pricing out some storage systems...ugh. IDK why I didn’t see you sooner! Will definitely share with other stampers. What a godsend! 💖
So happy to have found this! I just don't want to spend $90 for an already built one. My son's got the wood, I'll show this to him & see if he can find the time to build them. I'll measure when I get up, but am pretty sure the new stampin up ink pads will fit, also hoping Catherine pooler pads will fit. Are the cleats 4 inches deep?
I don’t know what is a “cleat” but it is 3-1/2” deep. Did you see the other videos on my channel? Lots of craft storage. Here is a ink pad made out of foam board. ruclips.net/video/Q8cRcrMrsIs/видео.html
Hello! So glad I found your product. Do you know if stamp pads from companies like lawn fawn and pink fresh fit? They are similar in size to the memento pads but a bit different shaped.
Hi Pamela, great question. 15 pennies fits in the slot. I would put two stacks and a ruler on top of the stacks and see if your ink pad slides under it. Hope this helps!
Since this video is older, I wonder if you’ll see my comment or not. My question is do you plan on shipping to Canada? I’ve tried so hard to make my own, I’ve tried saving up to buy from other places. I just can’t get an ink pad storage at a reasonable price in Canada. I would do other projects in my house too, if I could get your product. Not to put myself down, but as a woman, I think I could do theses projects if I had your product available. I’m sure other Canadians have contacted you for your brilliant product. Do you know how the got around you only shipping in the US? I think you have an amazing product and I could see myself using it a lot and putting the word out there, if I have success. Not that you need me too, as your product has endless possibilities.
You rock! You sound like you know a crafter or two. I have seriously been looking for an ink storage system that will fit ALL my different size ink pads. Plan to get my materials as soon as possible. Do you need to be a math wiz? I am not. Hope I can figure this out. Thanks for your video.
Thanks for your comment! No need to be a math wiz, I just laid it all out and cut the top and bottom boards at the end. God Bless, Stay Safe with this virus (pandemic) and let me know if you have any other questions!
I'm gutted that you don't ship these to the UK. I've tried making my own storage, but the inner parts are just too fiddly for me so I get impatient and end up with the measurements all out and looking really rough and the pre made ones don't suit what I want. Do you have any plans to expand overseas?
Looks like a great solution to my ink pad storage issue. I have been considering ordering from a specialty company but if this works, it will save me a lot of dollars and I don't mind making mine. I'll probably paint it up to look a little more finished before I install the racks. I ordered my first pack through Amazon. I have a feeling I'll be getting more. I have an average width but super deep closet in my craft room. I saw the craft closet video you did. I'm pretty sure I'm going to tackle that project as well! I'm a little intimidated with making the corner stud walls. Do you show how to do that step by step in any of your videos? Thanks much!
Howdy! Send me a picture and some dimensions. I will give it some thought and maybe a quick drawing or video. You can email me at Eugenio@EZStudRack.com
WONDERFUL tutorial. Thank you so much. I only have one question and it's about nailing all the sections together. Are you just putting 2 nails on the top & 2 nails at the bottom of the 4 outside boards and assuming that the 3 inside boards will stay in place by pressure?
Thanks for the comments. Yes, I hammered nails on each board to keep them from moving. So 2 nails on each edge of the outer and inner boards. Hope this helps!
Yes Lowe’s has a hand saw and you can cut but it is a custom build to you pads. I would get a saw kit and cut yourself. See link to Amazon amzn.to/47uj3bj
I would like to put a backing on my Stamp ink storage. What is the dimension of the last stamp ink storage on your video? P.S. im so glad I found your video online.
Hi Jody! If you are talking about the one on this video at time 6:30ish, it is 19-1/4” x 15-3/16”. You can always put it all together and do a final measurement (just in case you add a row of odd ball ink pads). Let me know if this answers your questions!!!!
Hi Denise, yes. They are plastic. I have cut with a hand saw, utility knife (though it takes some work) and a miter saw. With the miter saw cut slowly so it melts away vs chips away. Thanks for the question!
Hello Eugenio, and thanks for this video - greatly appreciated! :) Question - do the white EZStudRack pieces already come pre-cut (into 8 sections)? Or are they long and then we must cut them? Perhaps you explained this and I missed it. If so, I apologize.
Also, Stampin Up no longer produces that style ink pad...they changed them out last summer and I've been searching high and low for a good storage solution for the new style!! :) Would love to see how those work with your system.
If they are 3/4 thick or less, yes. Check out this video for unlimited options! Thanks again for the questions. ruclips.net/video/nOc33IbHDrw/видео.html LOL, this is the video you are looking at!
Hey Denise, just read that you are also still searching for a good solution My son made a present with a very good solution and now i want to bring it to the people cdn.discordapp.com/attachments/568810627254976512/568812340259192867/IMG_9353.JPG cdn.discordapp.com/attachments/568810627254976512/568812327667761165/IMG_9349.JPG these are just 3d printed prototypes and not the best quality, now me and my stamping friends try to collect enough money to make a production line of 1000 industrial made pieces about 5000eu to make the form for the production line and 2000eu for these 1000 pieces sell them for 7eu we are about to make a website now, once we finished this campain we will go for a stampin pad rack solution, and we already have a protoytpe its this one gyazo.com/a6e5daeff38765b70c61b3b477afbc44 photos from a real one will follow soon hope we can stay in contact :)
LOL with your "boom box" analogy. Adapting this for screw, hardware storage which will be a big job in my little shop. So glad I discovered you.
Oh man, I just bought 2 sets of these and cannot wait! More cost efficient than other options AND customizable! Cannot wait to get them!
I jut ordered last night after pricing out some storage systems...ugh. IDK why I didn’t see you sooner! Will definitely share with other stampers. What a godsend! 💖
Thank you! It’s in the mail!
This is amazing!
Awesome idea- just ordered! Perfect solution that don’t break the bank! Will be sharing with my crafty friends!
Awesome! Thanks! Your order will ship today!
How many EZStudRacks are in one package. Super idea!
each $20 package has 8 EZStudRacks. You can get on website or ETSY.
You are a genius! My only regret is that I haven't seen this before!
You are seriously amazing. Thank you!!
I bought these! Luv luv them 👏🏼👏🏼👏🏼
Awesome! Tell all ur friends 😬
You are awesome and amazing. Thank you!
I am soooo sad that you don't ship to the UK. I know lots of crafters that would love this and not just crafters. Great video so thanks for sharing!
So happy to have found this! I just don't want to spend $90 for an already built one. My son's got the wood, I'll show this to him & see if he can find the time to build them. I'll measure when I get up, but am pretty sure the new stampin up ink pads will fit, also hoping Catherine pooler pads will fit. Are the cleats 4 inches deep?
I don’t know what is a “cleat” but it is 3-1/2” deep. Did you see the other videos on my channel? Lots of craft storage. Here is a ink pad made out of foam board. ruclips.net/video/Q8cRcrMrsIs/видео.html
Hello! So glad I found your product. Do you know if stamp pads from companies like lawn fawn and pink fresh fit? They are similar in size to the memento pads but a bit different shaped.
Hi Pamela, great question. 15 pennies fits in the slot. I would put two stacks and a ruler on top of the stacks and see if your ink pad slides under it. Hope this helps!
I am trying to find something that holds the versafine Clair stamp pads. They seem to be thicker then most. Do you know if this will hold them?
Hi Joseph, the spacing is a little over 3/4 inch. How thick are they? See if this video helps
ruclips.net/video/AvKNtMo0h74/видео.html
Since this video is older, I wonder if you’ll see my comment or not. My question is do you plan on shipping to Canada? I’ve tried so hard to make my own, I’ve tried saving up to buy from other places. I just can’t get an ink pad storage at a reasonable price in Canada. I would do other projects in my house too, if I could get your product. Not to put myself down, but as a woman, I think I could do theses projects if I had your product available. I’m sure other Canadians have contacted you for your brilliant product. Do you know how the got around you only shipping in the US? I think you have an amazing product and I could see myself using it a lot and putting the word out there, if I have success. Not that you need me too, as your product has endless possibilities.
Hi Katherine, search EZStudRack on Amazon! There are two options, 8 pac or 32 pack. Let me know if you find it!
You rock! You sound like you know a crafter or two. I have seriously been looking for an ink storage system that will fit ALL my different size ink pads. Plan to get my materials as soon as possible. Do you need to be a math wiz? I am not. Hope I can figure this out. Thanks for your video.
Thanks for your comment! No need to be a math wiz, I just laid it all out and cut the top and bottom boards at the end. God Bless, Stay Safe with this virus (pandemic) and let me know if you have any other questions!
I'm gutted that you don't ship these to the UK. I've tried making my own storage, but the inner parts are just too fiddly for me so I get impatient and end up with the measurements all out and looking really rough and the pre made ones don't suit what I want. Do you have any plans to expand overseas?
Hi Vamps, we do not have any plans expanding outside USA and Canada. Sorry.
Looks like a great solution to my ink pad storage issue. I have been considering ordering from a specialty company but if this works, it will save me a lot of dollars and I don't mind making mine. I'll probably paint it up to look a little more finished before I install the racks. I ordered my first pack through Amazon. I have a feeling I'll be getting more. I have an average width but super deep closet in my craft room. I saw the craft closet video you did. I'm pretty sure I'm going to tackle that project as well! I'm a little intimidated with making the corner stud walls. Do you show how to do that step by step in any of your videos? Thanks much!
Howdy! Send me a picture and some dimensions. I will give it some thought and maybe a quick drawing or video. You can email me at Eugenio@EZStudRack.com
@@EZStudRack VERY helpful and thoughtful of you! That's awesome!
WONDERFUL tutorial. Thank you so much. I only have one question and it's about nailing all the sections together. Are you just putting 2 nails on the top & 2 nails at the bottom of the 4 outside boards and assuming that the 3 inside boards will stay in place by pressure?
Thanks for the comments. Yes, I hammered nails on each board to keep them from moving. So 2 nails on each edge of the outer and inner boards. Hope this helps!
AWESOME!!!!!
Where did you get the step rack
The white plastic (EZStudRack). If you go down in the description of the video There are links to Amazon, Etsy, and EZStudRack.com
Can your racks be cut shorter if desired? I love the idea, I am definitely doing this!
Yes, here is a video at about 20 minutes I cut it.
ruclips.net/video/DbjHmib8ij8/видео.html
Here is another video cutting at a out 15:30ish
ruclips.net/video/fFaO1zIH8Ek/видео.html
You’re awesome for your quick response!
Are you still in business. Do you ship to Canada? Where would I find a catalog of your products available and prices. Thank you
Search EZStudRack on Amazon. There is a listing there. Let me know if it shows up.
Will Lowe’s cut the wood for people that can’t, me? Can you paint the EZ stud rack?
Have you seen the video made from foam board? Here is a video. ruclips.net/video/Q8cRcrMrsIs/видео.htmlsi=cGaDPQhia2ZJLVhR
Yes you can paint, it’s available in gray and white. Here is paint video. ruclips.net/video/gkhbfWxVmV4/видео.htmlsi=Hw3NuDecigyguCM_
Yes Lowe’s has a hand saw and you can cut but it is a custom build to you pads. I would get a saw kit and cut yourself. See link to Amazon amzn.to/47uj3bj
I would like to put a backing on my Stamp ink storage. What is the dimension of the last stamp ink storage on your video? P.S. im so glad I found your video online.
Hi Jody! If you are talking about the one on this video at time 6:30ish, it is 19-1/4” x 15-3/16”. You can always put it all together and do a final measurement (just in case you add a row of odd ball ink pads). Let me know if this answers your questions!!!!
Can you cut the racks down shorter easily?
Hi Denise, yes. They are plastic. I have cut with a hand saw, utility knife (though it takes some work) and a miter saw. With the miter saw cut slowly so it melts away vs chips away. Thanks for the question!
Can you come with a. Design for paper punches pleaseeeeeeeeee
Email me so I can get an idea of what you are asking? eugenio@EZStudRack.com
Hello Eugenio, and thanks for this video - greatly appreciated! :) Question - do the white EZStudRack pieces already come pre-cut (into 8 sections)? Or are they long and then we must cut them? Perhaps you explained this and I missed it. If so, I apologize.
Hi Ted, they are 12-11/16” long each.
In this video I talk about the $20 package.
ruclips.net/video/XX8HSGfUeGI/видео.html
@@EZStudRack - Great - thanks so very much for the fast response!
Why won’t you ship outside of USA ?
Hi Sharon, I am working with Amazon for non USA sales. I tried shipping outside US, but ran into lots of issues.
@@EZStudRack thanks for your reply, hopefully we in Australia get to use what looks like a fantastic product..
Also, Stampin Up no longer produces that style ink pad...they changed them out last summer and I've been searching high and low for a good storage solution for the new style!! :) Would love to see how those work with your system.
If they are 3/4 thick or less, yes. Check out this video for unlimited options! Thanks again for the questions.
ruclips.net/video/nOc33IbHDrw/видео.html LOL, this is the video you are looking at!
Hey Denise, just read that you are also still searching for a good solution
My son made a present with a very good solution and now i want to bring it to the people
cdn.discordapp.com/attachments/568810627254976512/568812340259192867/IMG_9353.JPG
cdn.discordapp.com/attachments/568810627254976512/568812327667761165/IMG_9349.JPG
these are just 3d printed prototypes and not the best quality, now me and my stamping friends try to
collect enough money to make a production line of 1000 industrial made pieces
about 5000eu to make the form for the production line and 2000eu for these 1000 pieces
sell them for 7eu
we are about to make a website now,
once we finished this campain we will go for a stampin pad rack solution, and we already have a protoytpe
its this one gyazo.com/a6e5daeff38765b70c61b3b477afbc44
photos from a real one will follow soon
hope we can stay in contact :)
Now, about those pesky mini stamps.......LOL.
Would be a great video if not for the annoying music.