My GT3RS gets RARE BBS Wheels!
HTML-код
- Опубликовано: 19 сен 2023
- Use code HUNT50 to get 50% off your first Factor box at bit.ly/3XJx80v ! This is a wheel I have always wanted to run on my 991 RS, but never thought it would be possible with the Carbon Ceramics. I recently found a E89 face that was rumored to fit the ceramic set up, so I pulled the trigger.
Авто/Мото
The torque to 600nm(444ftlbs) is right and backing 90 degrees and retightening is right. It’s so the conical center lock is seated completely flush. Also please loosen and tighten with the wheels in the air so the wheel is completely flush to the rotor and make sure that gold center lock is pulled out when finished torquing so it’s completely locked so the wheel doesn’t fall off.
Porsche tech here. Was about to say all of this! Perfect instructions and yes! Make sure the centre lock pin is all the way out!
Same here, car must always be in the air, always hold the steering wheel so you don't punch a dent in your fenders
@andrewkennedy5702 hahaha yep that's a key on. Those fenders get close!
The GT3RS is freaking beautiful. The UV purple with the gold E89 is so good.
Hey Teej.
I just wanted to say how im so proud of all the hard work you put in the chanel and the company.
The quality of your content has came so far. Love u bro
Hey Noah.
This just made my day. I’m trying to increase the amount of uploads while maintaining constant action/ mods in every video which was been challenging and stressful lol.
You saying this, fuels me to keep going hard. So thank you ❤
@@tjhunt_ w
huge@@tjhunt_
dylan always trying make fun of you i don’t like him and your editor didn’t add the 88 wheels when you pointed you gotta stop the playing and get more serious so they can work better
more gt3 videos
E89s are classic looking so glad they made it on the gt3rs
They aren't staying though. He will be putting lms on later
Some clear side markers would match the tails so nicely
21:43 100% true. And if you plan on taking it on the track, make sure you inspect the center nut for scrapes, and buy Porsche approved lube for it, it is not anti-sieze.
TJ been upping his game hard, loving the crew behind him aswell, well deserved T
Looks Great! Should match the spoiler uprights to the wheels...and seat belt bar...if you are going to do that. Love it man
This is so nice. Love to watch video with your RS. I owned a 991.1 GT3 before. I learned that it will be better to torque the center lock with the car fully off the ground and torque it upwards. Just recommendation😁
looks so good teej!!!!!!! keep moving forward bro im so stoked for everything
Love the vids teej been watching ur channel for 5 years now. Never a dull moment! 🤘
#KeepMovingForward
TJ thanks for your amazing videos and can’t wait to see the M4 GT3 update and the OG Skyline R34
man, i havent watched the vlogs in about a year, forgot how much i missed watching them and just watching teej be happy. Brings me happiness seeing bro win, he deserves all of it. Love you TJ, gonna start chiming in again
Love the GT3 RS it looks amazing 👏 nice one...fantastic job.
So the retorque is for anti cross thread and seising due to heat, we do it a ton in the Aviation mechanic field. It also helps seat the wheel a lil more snug so there isn’t any chance of like debris causing gap.
As a tech working in the aerospace industry, seeing you guys play with compressed air like that raises all kinds of red flags
May I ask why? (Genuinely curious)
@mels_life1 force an eye from its socket
rupture the lungs, stomach and intestines, if blown into the mouth
penetrate human skin and if it enters the blood stream that air can be fatal by causing a heart attack
puncture an ear drum and cause deafness
blast poisonous particles into your body (where they immediately combine with your blood) if you have been painting or are covered with dirt or soot
So many auto shops play with air like that I feel like people don't know how risky it is. I always used to clean myself off with one and blow my shirt up to be funny until I learned the risks. Scary stuff!
I've been watching since the days in Calvin's garage. This is the best looking car you've had. #keepmovingforward
very nice goes w the purple big improvement on the black wheels that disappear against the violet
You can’t beat that combo!
Straight 🔥
The nicest car you have man I love it, can't get enough of the RS
glad to be a part of the broadcast channel and be able to see stuff beforehand
Gold and purple is always the move! Love it!
i’m getting hyped for the videos again good job tj
Can’t lie they’re absolutely fire!!
Perfection. You KILLED this omg
I love these BBS 😍 it looks so great with the combination of colors!
looks so good! my only critique or change id make is, a ducktail wing to set it off!! keep slayin
I believe I've seen one 991 GT3 RS running these same wheels around Orange County (Black 3 RS w/ black wheels) and I always thought that the only way I would ever change out the stock wheels on a 3 RS would be for these. Nicely done
@21:50 Not sure for porsche but as a fighter jet crew chief we have "center lock" gear and you tighten the nut to "seat" the wheel then back off and re torque it to spec to ensure an even seat all around.
Some of my favorite wheels! Bbs e88s are my all time favorite
Gonna change the look SO much. Hyped!
The RS actually looks insane with those wheels. Good choice my friend. Possibly the best spec’d RS I’ve seen
Center locks are beautiful but a pain in the butt to work with… you’re supposed to “as per Porsche tighten them up to 440 then loosen them 45-90 degrees then re tighten them to make sure they are at spec I don’t understand why but that’s what they call for hope it helps!👍🏻
@@macbook802 true but at the same time it’s the same for the magnesium racing Porsche wheels we get fairly often 0:42
It’s more because of the center locking design that Porsche uses not the type of wheel
I’m a Porsche tech at New Country Porsche and yes it’s 444ftbs then losses 90 degrees then re tighten with the car off the ground. Btw love the content huge fan!!!
Looks gangster 💪🏼💪🏼 just personal opinion rear would look so much better with a 335 tire .fronts on the money rear looks a little stretched but I loved the wheel option you nailed it 👌👌 been a watching sens BRZ exhaust video 🤝
100%, the rear needs a more square look sidewall. The stretched look throws it off
We all love you and the team Teej.
Car looks amazing dude, congrats. The motorsport wheels just hit different. BBS's are amazing.
Knew you'd go with the E89s Stay Classy!
solid choice! BBS a classic forever
9K people voted LM’s over the E89’s on the insta broadcast channel 😭😭 toughhh man lol
He just posted on there and said “89s….for now😉”
LM’s incoming
I really enjoyed this episode!! Half hunt half clips vibe 👌👌
Perfect choice ! So glad you worked with Ron "King Chotch"
doesn't this make you think, how much better the piano black 34 would look on contrasting wheels ?
Looks really good,I’m pretty baked and all I can think is those wheels are gotta get hot so close to the brakes,but I guess you can put the stock wheels on if your driving that hard
Just reading the title from my notifications I was thinking BBS LMs, but these are even better than I thought! Congrats man!
Congrats buddy beautiful car!
Car looks great bro keep up the good work brother 💪
Looks sick, probably one of the best I’ve seen
And another small mod to tie it all in would be yellow gt3 rs stickers on the side
Perfect wheel choice!
Awesome! (Barely caught on to wheel conversion explanation) looks cool 😅
Twon's gran turismo style edits are suuuper sick!!! 🔥🔥🔥🔥
him ''biting you'' is him suckling you and it means he loves and respects you, and its fkn adorable
Wheels are fukin dope ! The sad face after"My butt hurts" is priceless. 16:29
The rims and tires looks
sick
Perfect look for Porsche cant go wrong with bbs
Loving the new wheels on the RS, keep it up TJ
So gotta break the news, I've been on a TJ Hunt hiatus for the past2 years. And i just returned to watch this video and I am blown away! The quality and art of this video was amazing. Great job dude.
Those e89’s do look fire 🔥 on the RS
Looks amazing TJ! I however dislike the black bonnet a lot. Hope you can paint it violet aswell.
the reason for tightening to 440ftlbs backing off and retensioning is to properrly seat the wheel to the hub before final setting is applied
My boy you are missing the BBS stickers now. Beautiful combination.
7:10 ''Here's what it looks like...'' *no picture* 😂
TJ, you shouldn't break the center lock nut loose on the ground, always in the air with someone holding the brake pedal.
Wheels look great!
good to see another vid of yours, teej, early in the morning 😁
Glad you like them because that is more important than anything. The black is best though! Should have left it alone.
If you use a jackstand to support the extension it will help you tighten that easier
Mannnn the whips on this channel are so nice! What a life man!
Wheels are sick TJ
Always loved BBS wheels looks spicey
LOVE the GT3RS Rims!!!
The ride height is perfect. It will settle a little when driven. OEM+
BBS on Porsches are soo clean 10-10
Gah it would be so cool just working with you TJ it looks like the boys had a blast today, or hell any day butt today i laughed more than i care to admit!
Looks dope TJ! BBS’s always for the win! I say paint the hood tho and you’re set!
Love your GT3RS, It is my dream car :)
This is where I saw vin from Hoonigan rant on about that HYTORC Porsche Centerlock Wheel Torque Gun he has..... its insane how well it does the job.... might be worth the investment
oh yes see tj posted gotta watch right away
Looks sick!! I would say take the wing off and run a “touring” look for a sleeker look
Love the wheels … good choice they look right
4:13 _"If it slips, my nuts are gone"_ - TJ
_"You're fine, you don't need 'em."_ 😄
Notifications for your videos. So I can watch it the second it comes out 😎
Thank you for not going with more HRE’s, I know y’all have nothing but love for them but it’s nice to see something different
Impeccable choice as per with any mods you do😮💨
👋
@@willgreenfieldTHE GOAT😂🫡
Hey TJ, make sure you got new pads when fitting, if not when you go to do new pads, it won’t fit..sooo stoked for you
That brings a whole new perspective to a rim job😂
Wow, gorgeous car. Love it. I have 325/30's on my Macan GTS.
The wheel choice and specs are really awesome. That is a seriously good spec.
The stretched tyre and side wall height is not really my thing. I like it more height and square like the stock wheels has.
These are BEAUTIFUL 🤩
😂 tj poppin a woody sittin in the chair with Calvin like "um yeah I like that design…"
You should make a small metal box with its own valve stem, put 4 tpms sensors in it that have been linked with the chassis, and pressurize the box to whatever PSI won’t trigger the light, and secure it somewhere in or on the car. Drag racing trick for ya
Or just have them deactivated
Broadcast channel fam decided this 😎 SOOOO good Teej!
That is correct for tightening the center locks
These are the ultimate wheels for any porshe in my humble opinion every porshe should have this style of wheel
My pups loved helos reaction of seeing you
Need the clear side reflectors now to match the taillights
Let’s gooo! They look so good!
I had a stressful day… so I was like, I’ll catch up on some TJ Hunt. Delivered 🥂
…then was like, this has to have a hidden scene… yup ❤
looks gangster! chrome pops the clear tails
Convex face wheels on a supercar are craaaaazy lol anything convex just reminds me some some Canadian tire specials. Brutal 😂
It’s a very loud car all around now. It’s definitely 1:1. Well done!
AR Motorwerkz stays making whips fire