I found the product to be excellent! You do have to make sure the surface is completely dry like you said, and to keep it dry while curing afterwards. Unfortunately I had to reapply in one area as an unexpected rain came but the effect of the rain was minimal. Helps to tape off paint, it was visible on my dark paint where I went a little over. I have a whole lot of black plastic trim on my SUV and this has been the best an longest lasting trim coating I have ever used. Mine has lasted longer then claimed, however I do use a proper automobile soap and only air dry my vehicles. Your trim that had “MDX” on it will look even better with a 2nd coat.
I'm always on the look out for a better plastic restore, thanks brain, I wanted to wish you and your family a happy 4th of July brian, please have a great weekend, happy independents day, we live in the greatest country in the world, cheers brian.
Bless you, I have no idea how you keep up. The product list available is mind boggling I have tried some products on plastic that I do not care for but you have come up with several that seem to be winners. Again bless you sir.
But Cerakote sells them in a single car kit for that $30. I've spoken to like 5 people who've used this and they told me used 7-10 depending on the size of the car. Makes sense since they're sold as a 1 vehicle kit in the 10 pack. Adams is saying 1 should do an entire vehicle. While I don't know how true that is, even if you needed 2, the 2 pack's only $17. And Adams is pretty much always running a 15-20% sale. Now I have no which lasts longer or looks better, but in the end, Adams will be the cheaper solution here. I just added 2 2 packs on Adam's, with the discount it would be 35 shipped, and according to them it should be enough to do 4 cars trims and the headlights. If that's accurate that's a pretty damn good deal. Now we need Brian to do a heads up torture test so we know which is better. *hint hint*
Adams and tri nova wash off after three weeks. This actually lasts 5-6 weeks + The ONLY problem was the amount of wipes. My car is trim heavy and the amount wasn't enough. I needed 15 wipes ideally......
Brian, would you say Cerakote is the very best trim restorer you have ever used? If not, what would be your number one product for trim, plastics, rubber, vinyl?
WARNING: I had some major issues. Plastics that were right next to each other on a brand new vehicle (and looked to be the same) One looked black and the other was the milky streaky finish. I contacted Cerakote and they claimed it was "moisture during application" which it wasn't. That said, it works great on the OLD TYPE Pebbled plastics, but test a small area before doing you do the whole vehicle FOR SURE. Their response: "Cerakote Trim Coat is a permanent finish, there is not a way to remove the fully cured Trim Coat from the surface." aka you're stuck with a streaky milky crapy looking finish on your plastic. I liked the results where it worked, but where it didn't is a nightmare. I guess it will just have to wear off.
Funny I used this on outboard motor trim and it dried very spotty....made it look like total shit! I received the exact response from them. Have still yet to find something to take this stuff off how is yours wearing off so far?
I didn't get white streaks, but especially on smoother plastic trim, the product dries in streaks/high spots. It's like the wipes are too wet, so it's impossible to get it to do an even streak free coat on smoother plastic trim. Maybe if it were more like a traditional ceramic coating where you can apply it but then shortly wipe it to even it out and remove high spots, it would be better. Brian, how is your testing on this product going? I think I'll stick to Lithium Trim Serum.
cerakote, especially the clear, gets used a lot on custom bikes, hot rods and stunt bikes outside of guns. its a great finish that can take loads of abuse and still look good.
Richard Nicholas I don’t think it’s a good idea because it will be a pain to remove. I know it will turn brown. I used Adams tire armor and the tires turned brown and it took me about 8 times to remove with Adams tire and rubber cleaner. The tires were shiny for the whole winter but turned brown.
Looking for options.....used this on a marine outboard motor did not go on great. Have you found anything that does remove this stuff off without damaging the plastic? I have used a few things with no luck!
Great video, my only question is there any certain prep we need to do if we are using say adams ceramic waterless wash on the plastic. Will this adhere to the plastic or should I do some other kind of cleaning to the plastic before I apply this?
HELP Please! I used this product on all of the outside Black plastic trim on my 2008 Range Rover Sport. Everything was prepped asper instructions. I applied it to the non textured (smooth) Black plastic D Pillars and 80% of that application did self level and dry smooth and glossy. The other 20% of the application on the D Pillars dried with very noticeable streaking which can be felt as well as seen. Can I correct these areas by polishing, compounding or wet sanding or something else?
Hey Mr. Brian! Wishing you and the family a safe n sane or dumb and dangerous 4th, your choice of course. Question how would this work for the floor mats like the weather tech husky ect. Would it be to slick or durable enough for that use? Thanks again, for all you have taught us!
Ive been using the wolfgang exterior trim sealant and seem to have good luck with it. Doubt it would last as long as this stuff but i still enjoy using it.
Great review and presentation mate. Thanks. Is this product only designed for exterior plastic trims or could you use it on interior plastic trims or even the dash????
Please help! I used this and my trim is basically ruined. I followed all instructions. It made my plastic and rubber window trim streaky,splotchy and chalky.. is there any way to remove it??? Or just wait for it to fade away
If your plastic were new underneath, use the pink nail polisher remover which is non acetone and scrub of with magic eraser. If trim is old and beat up, sand it off with a maroon scotch pad for auto body. Then wet sand and polish with plain water and dish soap lightly with the used scotch pad or 1500-2k grit sandpaper. Make sure to let sit in the sun after washing to completely dry surfaces or recommendation in this video to avoid this issue. Ask me how i know this 😂
@@johnny6705 the plastic streaks and stuff has actually worn off basically, my issue is the rubber window trim, right now it’s like it has a glossy black finish on it and it’s cracked, any idea when I should do for rubber?
@@car_detailing0327 use acetone and magic eraser. I never tried this method but this is what Cerekote recommends for dissolving the coating without damaging what's underneath.
I have the Adams ceramic trim coating kit.I have not had time to do my car yet.This video is very informative and I appreciate it ✊Thanks Brian 💥🚀🇺🇸Happy Fourth Of July 👍🏻
great video, so you only used 2 wipes for the entire car? Why the heck do they say all over their web site and in every reply they left to questions on Amazon that you'll use about 10 for 1 vehicle? I know it's sold as a 1 vehicle kit, but 10 just seems excessive to me. Anyone who's used it, I'm curious how far 1 pack will go. I know it'll depending on how big and how much plastic. I'm just trying to get an estimate.
This would be great considering I just bought Trim Serum. I'm familiar with Cerakote from the firearm industry, so if it's anything like their firearm coating, it should be awesome.
Both seem outstanding products. For closer to 40 lithium gets you a TON of product that will cover multiple cars including their engine bays door seals etc have at it... Cerakote is $25 and packaged for pretty much one car. I was going to buy lithium... And cerakote threw a sale, dropped it to 16.95 with free overnight shipping and I couldn't say no. I'll probably buy lithium if it goes on sale and use the extra for my extended family's vehicles. Spread the love.
@@razetw Hey Leo thanks for the comment. I do have both products. I think they are very good. Both have the pros and cons as in most detailing products. In my neck of the woods I find lithium is great for pop and looks on a detail and the longevity is superior to most other products. The Cerakote was a tad tricky to get a more even coating but I find it lasts longer than lithium.
QuickGearVids I thought about that too. Just received mine from Amazon going to try it in a couple days if the rain & humidity will just hold off. Since most interior trim is plastic should be fine but might be too glossy would try on an inconspicuous area first.
The gloss finish that CeraKote leaves is a deal breaker for me, I think it looks like you've painted the plastic surfaces gloss black. I saw another review of this Cerakote and over time (5 months) it was showing cracking throughout, cracks like you'd see in a antique oil painting and as durable as the Cerakote is and resistant to cleaning chemicals it would be a PITA to remove. Here's the vid of the other comparison test: ruclips.net/video/1C5fYWMpPeM/видео.html go to 3:50 to see the cracking, this was after a 5 month test to outdoor weather in Florida, sun & rain.
Brian, would this be an option for coating headlights? I've been looking for something in single use packets that would last decently long, and offer the UVA/UVB protection they need. I'm not a fan of Wipe New, but love the foil packet idea. Currently use Opti-Lens, and like it, but this would work out to about a 3rd of the cost, per use.
Why did they have to do that... That silly pelican case makes it douchey right off of the bat. They could have left that part off. They are trying to appeal to the wanabe operator types wearing 5.11 everything and driving around in their CARC tan F-150s. You know they guy.. telling everyone how much time they did in ‘the sand box’.
Cerakote is an amazing firearms coating company. Probably why they sent a prominent RUclipsr like Brian a promotional kit in a top-notch Pelican case. But you can go right on criticizing nitpicky stuff like a little whining bitch.
A.D.D. Garage Yea it's garbage. Did my own test on it, and it didn't even last after a mild iron remover exposure. For the same price, if you want to stay with CG, I'd recommend their HydroCharge.
Exciting times in this industry as it is truly hard to keep up with all these new products....I will do my best to keep you informed! :)
could you use it on your dashboard and the plastic inside the car / ITS ALSO AVAILABLE HERE
@@koioo2 Yes
FYI per Cerakote the shelf life of unopened packets when stored in a room temp dark area (cabinet) is 12 months from ship date
I found the product to be excellent! You do have to make sure the surface is completely dry like you said, and to keep it dry while curing afterwards. Unfortunately I had to reapply in one area as an unexpected rain came but the effect of the rain was minimal. Helps to tape off paint, it was visible on my dark paint where I went a little over. I have a whole lot of black plastic trim on my SUV and this has been the best an longest lasting trim coating I have ever used. Mine has lasted longer then claimed, however I do use a proper automobile soap and only air dry my vehicles. Your trim that had “MDX” on it will look even better with a 2nd coat.
Thanks for keeping us informed on all of these new products!!
I'm always on the look out for a better plastic restore, thanks brain, I wanted to wish you and your family a happy 4th of July brian, please have a great weekend, happy independents day, we live in the greatest country in the world, cheers brian.
Thanks...Happy Holiday! Be safe!
Bless you, I have no idea how you keep up. The product list available is mind boggling
I have tried some products on plastic that I do not care for but you have come up with several that seem to be winners. Again bless you sir.
Adam's trim coating wipe is $10 for one wipe; Cerakote is $30 for 10 wipes...yeah I know which one I'm getting.
But Cerakote sells them in a single car kit for that $30. I've spoken to like 5 people who've used this and they told me used 7-10 depending on the size of the car. Makes sense since they're sold as a 1 vehicle kit in the 10 pack. Adams is saying 1 should do an entire vehicle. While I don't know how true that is, even if you needed 2, the 2 pack's only $17. And Adams is pretty much always running a 15-20% sale. Now I have no which lasts longer or looks better, but in the end, Adams will be the cheaper solution here. I just added 2 2 packs on Adam's, with the discount it would be 35 shipped, and according to them it should be enough to do 4 cars trims and the headlights. If that's accurate that's a pretty damn good deal.
Now we need Brian to do a heads up torture test so we know which is better. *hint hint*
Adams and tri nova wash off after three weeks.
This actually lasts 5-6 weeks +
The ONLY problem was the amount of wipes. My car is trim heavy and the amount wasn't enough.
I needed 15 wipes ideally......
Brian, would you say Cerakote is the very best trim restorer you have ever used? If not, what would be your number one product for trim, plastics, rubber, vinyl?
applying to the top of my 2016 F150 Truck bed cover later today. Thanks for instructional video.
WARNING: I had some major issues. Plastics that were right next to each other on a brand new vehicle (and looked to be the same) One looked black and the other was the milky streaky finish. I contacted Cerakote and they claimed it was "moisture during application" which it wasn't. That said, it works great on the OLD TYPE Pebbled plastics, but test a small area before doing you do the whole vehicle FOR SURE. Their response: "Cerakote Trim Coat is a permanent finish, there is not a way to remove the fully cured Trim Coat from the surface." aka you're stuck with a streaky milky crapy looking finish on your plastic. I liked the results where it worked, but where it didn't is a nightmare. I guess it will just have to wear off.
Funny I used this on outboard motor trim and it dried very spotty....made it look like total shit! I received the exact response from them. Have still yet to find something to take this stuff off how is yours wearing off so far?
I didn't get white streaks, but especially on smoother plastic trim, the product dries in streaks/high spots. It's like the wipes are too wet, so it's impossible to get it to do an even streak free coat on smoother plastic trim. Maybe if it were more like a traditional ceramic coating where you can apply it but then shortly wipe it to even it out and remove high spots, it would be better.
Brian, how is your testing on this product going? I think I'll stick to Lithium Trim Serum.
cerakote, especially the clear, gets used a lot on custom bikes, hot rods and stunt bikes outside of guns. its a great finish that can take loads of abuse and still look good.
Brian,
Which is a better looking and more resilient trim restorer ? Cerakote Trim Coating or Gyeon Trim ? Thank you
First - Happy 4th Brian and to all followers
Same to you!! Thanks!
Would you recommend menzerna 1000,2500 and 3000 for paint correction? I'm looking to ceramic coat my car afterwards. It's 2016 Japanese car.
I have a crazy question Brian. What do you think about applying Cerakote to tires ( just the side walls ) ?
Richard Nicholas I don’t think it’s a good idea because it will be a pain to remove. I know it will turn brown. I used Adams tire armor and the tires turned brown and it took me about 8 times to remove with Adams tire and rubber cleaner. The tires were shiny for the whole winter but turned brown.
Thanks ...
Looking for options.....used this on a marine outboard motor did not go on great. Have you found anything that does remove this stuff off without damaging the plastic? I have used a few things with no luck!
Theses things are a godsend if you own a Chevrolet Avalanche.
Great video, my only question is there any certain prep we need to do if we are using say adams ceramic waterless wash on the plastic. Will this adhere to the plastic or should I do some other kind of cleaning to the plastic before I apply this?
Brian you do awesome work love.ylur videos
can it be used on rubber window seals ?
I know this is for plastic only but I wonder if it can be used for the black weather strips or if there is something out there
Question on this produced, does it have or show any form of runoff onto the painted surface of a vehicle?
Happy Independence day to you . Thanks for keeping us informed of new products. I will have to check the web site for shelf life of the product.
Happy 4th!!!
Is this product safe to use on the interior faded black door panels where the door handles are? Please let me know. Thanks.
safe on any plastic.
HELP Please!
I used this product on all of the outside Black plastic trim on my 2008 Range Rover Sport. Everything was prepped asper instructions. I applied it to the non textured (smooth) Black plastic D Pillars and 80% of that application did self level and dry smooth and glossy. The other 20% of the application on the D Pillars dried with very noticeable streaking which can be felt as well as seen.
Can I correct these areas by polishing, compounding or wet sanding or something else?
Did you fix it yet?
Hey Mr. Brian! Wishing you and the family a safe n sane or dumb and dangerous 4th, your choice of course. Question how would this work for the floor mats like the weather tech husky ect. Would it be to slick or durable enough for that use? Thanks again, for all you have taught us!
It would make them a bit slick and slippery.
Ive been using the wolfgang exterior trim sealant and seem to have good luck with it. Doubt it would last as long as this stuff but i still enjoy using it.
Do you know one like this that can be used for the interior for vinyl also that last a bit long?
Great review and presentation mate. Thanks. Is this product only designed for exterior plastic trims or could you use it on interior plastic trims or even the dash????
Formulated for exterior...I have used in interiors. Works Fine. Follow with microfiber to level.
great video brian.i think i will try it.hope u had a safe and happy 4th of july.god bless!!!!!
Is this the same company that produces firearm coatings? The logo looks the same. If this is the same company, they make a pretty good product.
Tenzen808 apparently you didn't pay attention during the first 90 seconds of the video
@@marksatterthwaite7593 rewatched. I missed the first part due to working on some stuff, thanks.
Tenzen808 yes
Hi Brian, can you use it on interior plastic like dashboard or interior door? Thank in advance
Please help! I used this and my trim is basically ruined. I followed all instructions. It made my plastic and rubber window trim streaky,splotchy and chalky.. is there any way to remove it??? Or just wait for it to fade away
If your plastic were new underneath, use the pink nail polisher remover which is non acetone and scrub of with magic eraser.
If trim is old and beat up, sand it off with a maroon scotch pad for auto body. Then wet sand and polish with plain water and dish soap lightly with the used scotch pad or 1500-2k grit sandpaper.
Make sure to let sit in the sun after washing to completely dry surfaces or recommendation in this video to avoid this issue. Ask me how i know this 😂
@@johnny6705 the plastic streaks and stuff has actually worn off basically, my issue is the rubber window trim, right now it’s like it has a glossy black finish on it and it’s cracked, any idea when I should do for rubber?
@@car_detailing0327 use acetone and magic eraser. I never tried this method but this is what Cerekote recommends for dissolving the coating without damaging what's underneath.
@@johnny6705 alright, I’ll try to find some at the store, thank you so much
@@johnny6705 what kinda of acetone should I use? Like normal or like the nail polish stuff
Seems like a great value... thanks!
Does it work on textured jeep fenders?
I have the Adams ceramic trim coating kit.I have not had time to do my car yet.This video is very informative and I appreciate it ✊Thanks Brian 💥🚀🇺🇸Happy Fourth Of July 👍🏻
Happy 4th!!
Hey Brian. After I Cerakote the trim can I ceramic coat it with Artdeshine Ayicon?
Which is darker - Titium Serum vs Cerakote Trim restorer?
great video, so you only used 2 wipes for the entire car? Why the heck do they say all over their web site and in every reply they left to questions on Amazon that you'll use about 10 for 1 vehicle? I know it's sold as a 1 vehicle kit, but 10 just seems excessive to me. Anyone who's used it, I'm curious how far 1 pack will go. I know it'll depending on how big and how much plastic. I'm just trying to get an estimate.
Where did you get the case? I looked on their site and didn't see one
Hi Great video, I orders 2 sets1 ;) can they be applied on the gaskets on the car or just plastics?
Is this for tires too???
Can you use the trim coating on chrome and headlights?
Wow great product. It would be a good one to replace my Solution Finish as soon as I see the bottom of this bottle.
Great video👍
I applied mine but it didnt dry like a dressing. It left the some crosses and it dried. Now i want to know if you can take it off.
Mine dried nice and even. Wish I could help you.☹
So funny your change in opinion on Rinseless washes.
Can this be use on a jeep hardtop
you dont have to clean up after the Adams cleaner ?
Another awesome video Brian, do you put this above solution finish?
On the same level...for now. Still testing durability.
I need a pack of that... but not ten.. Lol Looks like good stuff
Looking for a way to renew my 1999 Wrangler fender flares that have turned grey. Think this will work or are they too far gone?
It should work fine.
Hey Brian..another great video.. How about a head to head with Lithium Trim serum...who wins that battle?
This would be great considering I just bought Trim Serum. I'm familiar with Cerakote from the firearm industry, so if it's anything like their firearm coating, it should be awesome.
It shall be done...along with many others.
Both seem outstanding products. For closer to 40 lithium gets you a TON of product that will cover multiple cars including their engine bays door seals etc have at it... Cerakote is $25 and packaged for pretty much one car.
I was going to buy lithium... And cerakote threw a sale, dropped it to 16.95 with free overnight shipping and I couldn't say no.
I'll probably buy lithium if it goes on sale and use the extra for my extended family's vehicles. Spread the love.
@@razetw Hey Leo thanks for the comment. I do have both products. I think they are very good. Both have the pros and cons as in most detailing products. In my neck of the woods I find lithium is great for pop and looks on a detail and the longevity is superior to most other products. The Cerakote was a tad tricky to get a more even coating but I find it lasts longer than lithium.
Great video! How do you find the time and energy to do these ?
I always find time for you guys!!
Great video, could this be used on a dash instead of armor all or 303? Thanks!
QuickGearVids I thought about that too. Just received mine from Amazon going to try it in a couple days if the rain & humidity will just hold off. Since most interior trim is plastic should be fine but might be too glossy would try on an inconspicuous area first.
What kit comes with the gun case?
Will this work on wheel wells
Nice stuff. Do you have any videos on Gtechniq or Gyeon trim coatings
Gyeon trim... Gtech...not yet.
Which would you recommend Brian....this or the lithium trim serum?
I will hold judgement until I finish testing durability.
@@apexdetail85 any updates to the Cerakote vs Lithium Trim Serum?
Thanks for the thorough video! Can I ask, do all of the kits come with that heavy duty pelican style case?
I would like to catalog this for a long term study please.
I am doing so.👍
The gloss finish that CeraKote leaves is a deal breaker for me, I think it looks like you've painted the plastic surfaces gloss black. I saw another review of this Cerakote and over time (5 months) it was showing cracking throughout, cracks like you'd see in a antique oil painting and as durable as the Cerakote is and resistant to cleaning chemicals it would be a PITA to remove.
Here's the vid of the other comparison test: ruclips.net/video/1C5fYWMpPeM/видео.html go to 3:50 to see the cracking, this was after a 5 month test to outdoor weather in Florida, sun & rain.
"Going to show you ots chemical resistance" proceeds to only spray untreated side and didn't scrud it.
Brian, would this be an option for coating headlights? I've been looking for something in single use packets that would last decently long, and offer the UVA/UVB protection they need. I'm not a fan of Wipe New, but love the foil packet idea. Currently use Opti-Lens, and like it, but this would work out to about a 3rd of the cost, per use.
I will test it.
At 30, I may order some and test it myself, on my daily rig. Thanks, man!
Why the gloves? Seems pretty harmless stuff
is that your 60th anniversary corvette zr1?
I wish.😜
I just use moonlight on my trim
I do too Chad.👍
Why did they have to do that... That silly pelican case makes it douchey right off of the bat. They could have left that part off. They are trying to appeal to the wanabe operator types wearing 5.11 everything and driving around in their CARC tan F-150s. You know they guy.. telling everyone how much time they did in ‘the sand box’.
Mr carry a gun around Walmart guy who never served but likes to dress up
Cerakote is an amazing firearms coating company. Probably why they sent a prominent RUclipsr like Brian a promotional kit in a top-notch Pelican case. But you can go right on criticizing nitpicky stuff like a little whining bitch.
Are you familiar with Chemical Guys “Jet Seal” ?
A.D.D. Garage Yea it's garbage. Did my own test on it, and it didn't even last after a mild iron remover exposure. For the same price, if you want to stay with CG, I'd recommend their HydroCharge.
No comment.🙂
LMAO....love your thoughts on Chemical Guys !!
I thought it would cost $200 but no!
It did when you buy the rolling coal ammo case edition
Blotchy ... There are better ...