How To CUT CROSSLAPS (In Thick Lumber)
HTML-код
- Опубликовано: 2 июн 2019
- Check Out Our FREE GUIDE: 25 Must-Have Carpentry Tools...Under $25 Each!
www.thehonestcarpenter.com/
AFFILIATE LINKS FOR TOOLS:
Stanley 3 pc Chisel Set:
amzn.to/38sgTxB
VonHaus 10 pc Chisel Set:
amzn.to/3e72I4n
Makita 7-1/4" Circular Saw:
amzn.to/3bTcRz3
Swanson Speed Square:
amzn.to/3c0JsmH
(These are affiliate links. When you shop through these links, we receive a small commission at NO EXTRA CHARGE TO YOU. We greatly appreciate the support!)
FOLLOW US ON INSTAGRAM:
/ thehonestcarpenter
FOLLOW US ON LINKEDIN:
/ thehonestcarpenter
Crosslap joints allow you to bring two pieces of wood together on an even plane. This short video from The Honest Carpenter will show you how to cut crosslaps in thicker lumber like 4x4 posts!
Here's a link for the wedding arbor ebook mentioned in the video:
bit.ly/WedArborEbook
And, here's an article on The Honest Carpenter website detailing this crosslap joint process (including tool links):
thehonestcarpenter.com/blog/c...
Tool List:
Tape Measure
Circular Saw
1" Chisel
Speed Square
How-To Cut Crosslaps:
1) Lay out the position of your crosslaps on the two pieces of lumber you would like to join. (Use a tape measure and speed square to create one side of your crosslap layout, then a piece of stock to scribe your other side.)
2) Set the depth of your cut by finding the center line of your lumber stock on the adjacent face of the material. Set your circular saw depth to this mark.
3) Use a speed square as a guide for your circular saw sole plate--cut the "perimeters" of your crosslaps. Try to split your pencil lines up the center.
4) Begin making cut passes through the stock between the perimeter cuts. Space cuts about 1/8" apart.
5) Break out standing fillets with a large screwdriver.
6) Clean the floor of the crosslap with a 1" chisel (keep bevel up)
7) Test fit with a piece of stock
8) Lay out and cut second crosslap on second piece.
If you enjoyed the video, please be sure to hit like and subscribe!
Also, be sure to visit us at The Honest Carpenter website for more tips, articles and tool links:
www.thehonestcarpenter.com 
Хобби
Your style of instruction is exactly what I needed. Thanks for putting effort into helping others learn the trade.
I like that trick you used to hold the skill saw straight while making a cut by using the speed square to guide it. Nice and easy trick to know as a homeowner.
Thanks, I knew I could find someone who could explain this easily with great examples.
This is great! I had this idea for a desk I'm building but didn't know if it would be possible with just a circular saw. Nice to know that it can be done. Thanks man! 👍💪
Great video! I'm really enjoying watching these. Started from your oldest, and working my way up
Excellent tutorial!
Thank you. Great video. I cut these notches similar way, only for final cleaning I am using horse rasp/file. It works very well on softwood.
Awesome. As usual. I did it a harder way today. I've got 3 more to do tomorrow. Your way was easier.
Excellent. Perfect display!
Well done. Succinct; informative; easy to understand.
I always learn something from your videos. Thank you.
You’re welcome, D.H., thanks for watching!
Great explanation of the simple technique. Looks great.
Curtis Keller Thank you!
Thanks for the tips and really helpful video!
Exactly the info I was looking for 😊
Awesome 😎 .thanks for posting this!!
Good instruction. Thanks for your videos.
PT Johnson You’re welcome, thanks for watching!
Great video Ethan. I think everyone wants to figure out a way to clean those edges up without using a chisel, but you showed us how. Thank you
Ed Over50 You’re welcome! I always appreciate you watching 🙂
Very helpful! Thank you 😊
Nice work Ethan!
Thank you, Ashley!
Ace. I need to make a tonne of cuts for a new workbench and I was thinking how best to fence my saw - speed square is so obvious now you're shown it! Thanks
You’re welcome, Rich! Work safe 🙂
- Thanx 4 the info. Very helpful.
hi.....I made a watching your video. Thank you for being an inspiration to me
Great video, thank you.
very interested in how timber frame houses are built. Can you do a video on the framing for those kinds of buildings?
AWESOME! I have no experience and this has been the clearest, most concise tutorial I've seen. You are an excellent teacher! I'm feeling creative during this corona lockdown. Thanks so much for posting this. All the best to you and your family and stay safe!
Great video and very instructional. To make the identical cuts faster, you could have clamped 2-4 pieces together and just pass the saw through them.
Thanks for your videos
You’re welcome Malcolm, thanks for watching!
What do you call it when you cut both sides to where you’re able to stack 2x4s on top of each other at the cross joints like Lincoln logs? The closest on RUclips I’ve been able to find are dovetail cross joints. I want to do something like that but simpler. I don’t have the tools or the mathematical “smarts“ to do dovetails.
I was planning on making wood cross using 4×4 10' tall when I make the second cut to give the width of the cutout for each piece to go together should the cut be right on the pencil line or to the side of the line so doesnt make it too tight or too loose when joining wood together?
i want to make a indoor bench like this (legs) . However is this method exact enough for a really seamless result?
Nice video . New subscriber
Thank you, I need to make identical half lap joints in 4x4 inch timber. I have eight 1.3m lengths of 4x4 inch timber. I need to make four wooden crosses from these eight timbers, each cross joined together using a half lap joint as you demonstrate, so I need to cut out eight half rectangular joints, or tenches as you demonstrate, a lot of work !!!! Therefore, to speed things up, can I align all 8 timbers side by side and run a track saw guided by a rail to cross cut the shoulders of the lap joints on all eight timbers in only two cross cuts ? thank you.
You can. Make sure your boards don't move at all..
I prefer a rasp. Quicker and cleaner IMO
Good Video... Food for thought. Get a dado blade, it will do a better job of cleaning out these joints, and less chisel work. Keep up the videos. Good job.
Scott R Thanks! I had a good dado set up years ago, but lost it when I packed up my shop 😪 You’re right though, you don’t get a cleaner interior than what dado blades offer
Min 2:32, can’t tell what you said about your second perimeter cut. It sounded like “split your pencil mark right up the middle”. Is that what you said?
How do you do this for a 6x6 post when my 7 1/4 blade depth isn’t long enough to go through half way through the post
Use a backsaw or pull saw for the remaining depth you need or the whole cut.
Would a multi tool work instead of the chisel ?
I'm not good with chisels
David B Hard to say. It might be a little too aggressive. But, you’d be surprised how effortless this chisel technique can be. As long as the flat surface is down, it’ll really just lift the grain out in clean, manageable slivers
Thanks
Thanks internet dad
why not use the Dewalt 20V Oscillating Multitool instead of a chisel?
Some feedback. A little right about talking too much, but you do you. A positive, you didn’t feel the need to show your face in a grandiose intro. Some guys are trying to be This Old House. Thanks, decent review on rough cut half laps. What about precision hand sawn ones?
Anyone able to wrap their head around how to do this with 3 beams? It has to be possible, something like a puzzle game, but I want all 3 directions to continue after the intersection….
😂. This is the first time I’ve ever heard someone call a huppah a “wedding arbor”.
Instead of going through the chisel work, just cut with your circular saw..
Woodglut plans are amazing!
Thousands of lifetime projects with Woodglut plans.
Toooo much talking. Just build it