Theres also a firmware update to fix the Nintendo switch connection issue. Anyway, i have the same color headphones as you. Do you have any tips on how to clean the headband?
If it is dust and stuff like that you have to buy something to make it as easy as possible it, there is something that does that at IKEA but not sure of name. Otherwise not sure
I randomly find myself coming back to this video for support. I cheaped out buying this headset and even though it does what it needs to it gives me so many headaches dealing with it. To put it in simpler terms-“sometimes issa good, sometimes issa 💩” Thank you for all the support. I downloaded this video since it’s the most helpful one I’ve found.
I was struggling to figure this out for over ten minutes on my own before I finally checked for a video. Yours was the top result in my feed, and by following your steps, the headset finally got connected! Thank you so much for this video!
Fml, this actually saved me from throwing my headphones into the bin, was getting really frustrated of trying to fix them not letting any sound through. Spent hours updating driver's, checking settings, control panel, usb ports etc etc 😅Thank you so much for this video 🥰
true for me happend the same i lost my all day trying i got antry and i try to see more and more videos and still nothing but this t ime when i see this video for me they start working is amazing tank you for saveing me too :) it was super good help video
The LED when it turns to Cyan starts blinking and it wont connect to the dongle. How do I connect it to my pc with the dongle in it. I followed the steps and nothing worked besides bluetooth pairing mode.
I have to edit this whole reply, because at the time I wrote it I still didn't understand fully how it works, but it's actually really simple. The headset has 2 modes. Lightspeed (dongle) mode and Bluetooth mode. You switch between them by holding down the MUTE button for 3 seconds. If the LED turns blue, you're in Bluetooth mode. If the LED turns cyan (pale blue), you're in Lightspeed (dongle) mode. The dongle mode just works. The Bluetooth will need pairing, at least the first time. You enter pairing by holding down the MUTE and POWER buttons at the same time until the LED starts flashing. The part that confused me, was that you could pair it to Bluetooth even in dongle mode. But it would not reconnect by itself. You had to pair every time. If it is in Bluetooth mode it will reconnect to the device it was connected to last. You can also pair it to multiple devices. Which of them it will actually connect to depends on various factors, but if it ever connects to the wrong one, just go into Bluetooth settings, make the headset enter pairing mode and select it from the list. I haven't had any problems with it, since I figured it out.
@@moneyteam2069 Actually after finally trying to connect it to my PC, I figured out I was in the wrong mode. It was blinking pale blue. That's for the dongle. Then I finally got it into Bluetooth mode thanks to this video (dark blue LED) and later realized that now it automatically connects to paired devices - which is what I was expecting from it... It's also very easy to switch modes and use it via the dongle. The mute button It makes sense now - by default it was configured for the dongle. And I was connecting it to Bluetooth in dongle-mode. In fact I'm surprised it even worked! However this isn't explained anywhere I've seen. So it was a hassle figuring it out. But now I turn it on and it's instantly connected to my tablet or my PC depending on that setting. I have no more complaints about it. Except the lack of instructions. It's a great headset.
@@deezeembi just bought it and i have a problem that any solution couldn't fix it so my problem is that my headset doesn't recognize the adaptor simple as it seems i didn't find any solution sadly
@@mazen1797 Did you change it into Dongle mode? The light which blinks dark blue in BT pairing mode has to blink pale blue, almost green and when connection to dongle is established, it will be a solid color. You change the modes by holding down the mic mute button at the bottom for a few seconds until the light changes color. Make sure you're in the right mode.
@@mazen1797 If nothing else works, try resetting the dongle while headphones are in dongle mode. Unplug and replug the dongle. If it still doesn't work, check if it's recognized properly in Device Manager under Sound, video and game controllers - Has to say "G435 Wireless Gaming Headset", otherwise you have a driver problem.
I did it steb by step but the cyan light still keeps blinking ... My laptop recognizes the donlge but when i click on the headphones on the sound option i receive no sound ... Please help
ive only just got this headset and i cannot for the life of me figure out what is going on whenever i do this it does not work but see in so many places that it should, whenever i do these steps it just starts flashing cyan it never goes bold, and then there is 2 types of flashing cyan, 1 is a slow flash and 2 is a fast flash what do these mean? please i am praying for some help!
They just finneakey or how ever u spell it, just keep playing around with them… I figure if u get it on the right setting for what u want and it isn’t working keep it on that setting turn them off turn them back on and they’ll usually connect
My G435 keeps disconnecting randomly (it blinks cyan light). From time to time it will start working but the problem randomly reappears. Somitmes restarting my PC helps, sometimes they just randomly connect and disconnect after random amount of time. Could you help me? Thanks in advance
I don't know if you are still experiencing these problems but I think that the wireless Logitech mouses cause this problem. Since i started using my G305 i have been experiencing problems with the headset. Im trying to use it now withouth the mouse and everything seems to be working. If the headset disconnects again then idk it must be a Logitech issue and it should be refundable.
You sir are a legend! My girlfriend borrowed my headset today and when she gave them back I couldn't get them working for love nor money!!!!! I eventually managed to connect via bluetooth but was miffed that the dongle wasn't working. Needless to say I didn't realise that there was a wireless and a bluetooth mode on the headset! Holding the mute button, who knew?! NOT ME!
thank you, worked fine out the box for me and then wouldnt work after unplugging everything when i got a new desk, glad i could find this video so quick
Man, the manual of this headset sucks. All that I learned of connection was from youtube, but I was getting trouble going from the bluetooth back to the dongle. This videos helped me a lot, thx for posting it!!
THANK YOU SO MUCH FOR TELLING ME ABOUT THE SWITCHING BETWEEN BLUETOOTH AND USB MODE, I was so confused on why my thing wasn't working and it was because i accidentally put it in bluetooth mode
My headset wouldn't connect to my PS5 all of a sudden and I had just downloaded a new game and couldn't believe they broke. This fixed it. PS5 doesn't support bluetooth audio but this video let me figure out that I needed to switch it back to lightsppeed.thanks!
got this headset 4 days ago and its been fine the first 3 days i have used it wireless on my pc and with Bluetooth on my phone but today its just not working so i charged it to full and im doing the steps but its still not working and its getting frustrating just keeps flashing blue any solutions would be appreciated
This still works! For some reason my headset hasn't been charging right and I was looking up issues on how to fix it, but that's when I found out about lightspeed mode. Now I don't have to worry about keeping a charge the entire time! :3
So I learned from this video I just held the mute button a few seconds to long and did not realize it switched modes thank you so much I can hear again
After switching from bluetooth pairing mode (slow blinking cyan) to the dongle connection, the LED would show blue, and then the blue light would blink slow with no noise coming out the speakers. How do i fix this problem?
I have a recent issue, Changing volume from the headset swaps the side where the volume comes from. Can still hear from both sides but other one is always louder.
@@TheProvokedPrawn i have a big problem my Bluetooth works but when i want lightspeed i just prrss muutr button than cyan colour os on for 3 seconds then it starts blinking with cyan. When i try to hear soemthing it doesn't work. Any advice how to fix it?
This helped me now. I was having issues with my G435 when trying to use it for a Zoom call. I was worried it's broken. Sheesh I just had to press the mute button for a few seconds and it connected again. I did do a restart and disconnect of the Dongle before this. Anyways, this headset is both great and a nightmare sometimes.
Thank you SO MUCH for this oh my god. I feel so stupid. I've been sitting here for half an hour trying to work out if it's a driver issue. It was just a human issue. I appreciate this so much
I got it today and everything is perfect but.. The dongle barely got into the usb port of my PC, it works though, but I'm concerned now that it will damage itself over time. does it have to slide in perfectly? I had to kinda force it in, wiggling it a bit till the end.
thank you!!!! I was about to throw my headset in the trash bin. My 3 year old son had it and it didn`t connect, after he gave it back to me. In the end, he had switched to Bluetooth mode. I didn`t read about the trick with pressing the Mic button... Enjoy your day!
1. Shut down headphones [ turn off your headphones ] 2. Insert the dongle [ take off your usb dongle then re insert on your usb port ] 3. Press power button for 2 sec( green light will blink) [ it means to power on your headphones till you see green light ] 4. Press power + mute for Bluetooth pairing mode(blue led will blink) [ power + mute button till its blue light ] 5. Hold mute button to connect to dongle( led will turn cyan) [ self explanatory you hold the mute button till its cyan ] enjoy this works for pc too im a pc gamer thank you sir @ The Provoked Prawn
my headset will turn on and off it gives me a green light and the startup noise. but when i press any buttons, on/off, mute, volume nothing happens, lights don't turn on volume does not come out nothing seems to be connecting. this method doesn't work the cyan light won't come on the green light doesn't reappear. anything I'm doing wrong I'm very confused.
Best video ever when my headset changed over to Bluetooth I couldn’t fix it and this video showed me how to otherwise I would’ve wasted a lot of money 👍🏼🙌🏼
Theres also a firmware update to fix the Nintendo switch connection issue. Anyway, i have the same color headphones as you. Do you have any tips on how to clean the headband?
Sadly not. I'm actually not using them anymore. Thanks for the tip on the Switch.
hold the on and off button with the mic mute button until it flashes fast
If it is dust and stuff like that you have to buy something to make it as easy as possible it, there is something that does that at IKEA but not sure of name. Otherwise not sure
@@SukhwinderKaur_987 kk
Olá tudo bem vc consegui atualizar para conectar no nintendo switch?
The fact that I can now actually hear this video through the headphones, instead of just reading the subtitles is a great thing. Thanks!!!
Glad it helped!
Same here, hahaha
yes really is so good thank you very much
THANK YOU !!!!!!!!
@@TheProvokedPrawn me too thank you do much
I randomly find myself coming back to this video for support. I cheaped out buying this headset and even though it does what it needs to it gives me so many headaches dealing with it. To put it in simpler terms-“sometimes issa good, sometimes issa 💩” Thank you for all the support. I downloaded this video since it’s the most helpful one I’ve found.
I was struggling to figure this out for over ten minutes on my own before I finally checked for a video. Yours was the top result in my feed, and by following your steps, the headset finally got connected! Thank you so much for this video!
I aim to please
I have these exact headphones and I wasnt using them for an entire YEAR, just because I holded the mic button for too long...thanks.
Thanks for the super thanks. Glad I helped you!
I tried this twice first time didn't work but second time did, I was about to just give up and forget about it you are a lifesaver
Fml, this actually saved me from throwing my headphones into the bin, was getting really frustrated of trying to fix them not letting any sound through. Spent hours updating driver's, checking settings, control panel, usb ports etc etc 😅Thank you so much for this video 🥰
Glad to help
true for me happend the same i lost my all day trying i got antry and i try to see more and more videos and still nothing but this t ime when i see this video for me they start working is amazing tank you for saveing me too :) it was super good help video
Thank you so much I have been having this issue for a month now and no other video was able to give me clear instructions like yours.
Glad to help. Hope you enjoyed enough to subscribe 🦐
are you Fakebots? That doesnt help LOL
The LED when it turns to Cyan starts blinking and it wont connect to the dongle. How do I connect it to my pc with the dongle in it. I followed the steps and nothing worked besides bluetooth pairing mode.
same, have you found a way to fixed it?
@@nocturnal3884i got the same problem and there is no way to fix it, lightsync adapter is broken
@@гопед that's sucks, im trying to get a new one (not logitech of course)
@@nocturnal3884 im gotta get wired 😂
@@гопед thats better
I have to edit this whole reply, because at the time I wrote it I still didn't understand fully how it works, but it's actually really simple.
The headset has 2 modes. Lightspeed (dongle) mode and Bluetooth mode. You switch between them by holding down the MUTE button for 3 seconds. If the LED turns blue, you're in Bluetooth mode. If the LED turns cyan (pale blue), you're in Lightspeed (dongle) mode.
The dongle mode just works. The Bluetooth will need pairing, at least the first time. You enter pairing by holding down the MUTE and POWER buttons at the same time until the LED starts flashing.
The part that confused me, was that you could pair it to Bluetooth even in dongle mode. But it would not reconnect by itself. You had to pair every time. If it is in Bluetooth mode it will reconnect to the device it was connected to last. You can also pair it to multiple devices. Which of them it will actually connect to depends on various factors, but if it ever connects to the wrong one, just go into Bluetooth settings, make the headset enter pairing mode and select it from the list.
I haven't had any problems with it, since I figured it out.
Most useful thing I’ve read about this headset I was tempted on buying a new pair I could have sworn I broke them
@@moneyteam2069 Actually after finally trying to connect it to my PC, I figured out I was in the wrong mode.
It was blinking pale blue. That's for the dongle. Then I finally got it into Bluetooth mode thanks to this video (dark blue LED) and later realized that now it automatically connects to paired devices - which is what I was expecting from it...
It's also very easy to switch modes and use it via the dongle. The mute button
It makes sense now - by default it was configured for the dongle. And I was connecting it to Bluetooth in dongle-mode. In fact I'm surprised it even worked! However this isn't explained anywhere I've seen. So it was a hassle figuring it out. But now I turn it on and it's instantly connected to my tablet or my PC depending on that setting. I have no more complaints about it. Except the lack of instructions. It's a great headset.
@@deezeembi just bought it and i have a problem that any solution couldn't fix it so my problem is that my headset doesn't recognize the adaptor simple as it seems i didn't find any solution sadly
@@mazen1797 Did you change it into Dongle mode?
The light which blinks dark blue in BT pairing mode has to blink pale blue, almost green and when connection to dongle is established, it will be a solid color.
You change the modes by holding down the mic mute button at the bottom for a few seconds until the light changes color. Make sure you're in the right mode.
@@mazen1797 If nothing else works, try resetting the dongle while headphones are in dongle mode. Unplug and replug the dongle.
If it still doesn't work, check if it's recognized properly in Device Manager under Sound, video and game controllers - Has to say "G435 Wireless Gaming Headset", otherwise you have a driver problem.
I just had to follow the steps in the video description, cuz i had no audio whatsoever. Now I have! Thanks!
I did it steb by step but the cyan light still keeps blinking ... My laptop recognizes the donlge but when i click on the headphones on the sound option i receive no sound ... Please help
MINE TOO
same
yup same here, appears its a problem for everyone
yes
man this headset is total garbage, ask logitech to get a new replace
ive only just got this headset and i cannot for the life of me figure out what is going on whenever i do this it does not work but see in so many places that it should, whenever i do these steps it just starts flashing cyan it never goes bold, and then there is 2 types of flashing cyan, 1 is a slow flash and 2 is a fast flash what do these mean? please i am praying for some help!
Hello, were you able to solve the problem, the same thing happens to me as to you
I followed the steps but it still failed to connect
Solution????
Redo muti times cuz I had to too
They just finneakey or how ever u spell it, just keep playing around with them… I figure if u get it on the right setting for what u want and it isn’t working keep it on that setting turn them off turn them back on and they’ll usually connect
Yeah same mine worked fine until it decided it didn’t want to connect with them dongle any more
Same
i just wanna say you fixed my issue about 17 seconds into the video but i still watched the video because your videos are the best. thanks alot bro.
Appreciate you.
TYTYTY THIS TOOK BOUT 2 HOURS IT FINALLLY WORKKSSSSS
My G435 keeps disconnecting randomly (it blinks cyan light). From time to time it will start working but the problem randomly reappears. Somitmes restarting my PC helps, sometimes they just randomly connect and disconnect after random amount of time. Could you help me? Thanks in advance
i have the same problem
It happens to me. :C
Sameeee
I don't know if you are still experiencing these problems but I think that the wireless Logitech mouses cause this problem. Since i started using my G305 i have been experiencing problems with the headset. Im trying to use it now withouth the mouse and everything seems to be working. If the headset disconnects again then idk it must be a Logitech issue and it should be refundable.
You sir are a legend! My girlfriend borrowed my headset today and when she gave them back I couldn't get them working for love nor money!!!!! I eventually managed to connect via bluetooth but was miffed that the dongle wasn't working.
Needless to say I didn't realise that there was a wireless and a bluetooth mode on the headset!
Holding the mute button, who knew?! NOT ME!
Glad I could help!
Thanks a lot it worked you literally saved me a lot of time I have been trying to get pass the issue for hours now thanks a lot ❤️
Glad it helped. Return the favour by subscribing 👍
Same XD
thank you, worked fine out the box for me and then wouldnt work after unplugging everything when i got a new desk, glad i could find this video so quick
i was fiddling around with it for about 30 minutes and came to the conclusion mine had broke until i saw your video and fixed it. thanks alot ❤
Glad I could help
Whenever my headphones dont work i come to this video and it always helps thx
THANK YOU SOOOOOO MUCH XAVIER RODIGUEZ
No problem
just bought this 435 and im struggling to connect to my pc but thanks for this video saved me from being frustrated lol thumbs up
Thank u so much I finally connected it to my ps4 thank u
Man, the manual of this headset sucks. All that I learned of connection was from youtube, but I was getting trouble going from the bluetooth back to the dongle. This videos helped me a lot, thx for posting it!!
You're welcome
thanks a lot, helped me out a ton. i was trying to fix it for a week and then i stumbled upon this video and fixed it in 2 minutes
Glad it helped!
Thank you bro, just got the headset today and for a second thought it was broken. This video really helped me out!!
Glad to help
Turns out I just deafened myself when I passed out last night! Lol I was really stressing 'bout this tysm!
Glad I could help!
Cheers for this. I thought the headphones were done for. So frustrating. Great catch, Xavier.
Glad to help!
OMG thank you so much, I was struggling to figure this out so thankfully someone uploaded a video
THANK YOU SO MUCH FOR TELLING ME ABOUT THE SWITCHING BETWEEN BLUETOOTH AND USB MODE, I was so confused on why my thing wasn't working and it was because i accidentally put it in bluetooth mode
👍🏼👍🏼
I’ve been trying to sort this out for hours and I found your video and it worked perfectly!! Thank you so much!!
loved being able to hear the solution with no audio!!
Closed captions or read the description
Such an easy to fix most helpful video youtube has ever provided thank you
Glad it helped
2024 still works :) thank u mate! i was struggling with this one for few days of losing the signal and now it again works!!!!! thank you a lot
thank you so much. i've been struggling with this for days, didn't find anything on the logitech website, you are a GOD
I done all of this and the microphone still isn't work and I tried a lot of things and cant seem to fix it could you please help me
Did u fix it i have the same problem, please let me know how you fix it
thanks alot i was playing games without using the sound from the headset, but then your really helped me alot!!
OMG THANK YOU MY HEADST AUDIO HASNT BEEN WORKING FOR SO LONG AND THSI HELPED SO MUCH THANKS
Glad it helped!
I was pulling my hair out because my headset quit working! This was the issue, it switched to Bluetooth! Thank you!!!
You're welcome!!
Thank you so much! Your video is a real problem solver and saves the life of my headset.
Glad I could help!
My headset wouldn't connect to my PS5 all of a sudden and I had just downloaded a new game and couldn't believe they broke. This fixed it. PS5 doesn't support bluetooth audio but this video let me figure out that I needed to switch it back to lightsppeed.thanks!
got this headset 4 days ago and its been fine the first 3 days i have used it wireless on my pc and with Bluetooth on my phone but today its just not working so i charged it to full and im doing the steps but its still not working and its getting frustrating just keeps flashing blue any solutions would be appreciated
same issue only working on bluetooth
man you just saved me i just spend 3 h of my life trying to fix this
This still works! For some reason my headset hasn't been charging right and I was looking up issues on how to fix it, but that's when I found out about lightspeed mode. Now I don't have to worry about keeping a charge the entire time! :3
Thank you so much I just spent 50 dollars on this headset and this helped me connect it
No problem 👍
thank you!! been fighting with this for a few weeks now and that was the heckin easiest solution of all time.
So I learned from this video I just held the mute button a few seconds to long and did not realize it switched modes thank you so much I can hear again
thanks bro, you saved my gaming life (acually whole life)
I aim to please
After switching from bluetooth pairing mode (slow blinking cyan) to the dongle connection, the LED would show blue, and then the blue light would blink slow with no noise coming out the speakers. How do i fix this problem?
bro I owe you a million dollars, thank you
You're welcome. Subscribing will be enough thanks 👍
Thanks it really worked it kinda had me scared when it wasn’t connecting for a while😥
Only watched the first minute! Already fixed! Thank you
big thanks i didnt know i had to hold the mute button. thank you again.
mine didn't come with a dongle usb
thanks for putting what you did in the description, solved my problem in like 30 secs lol
Thanks for commenting at least 🤣
Thank you so much I had it all set up on my PS5 but I still couldn't hear until I tried these steps out
Got this today for Christmas and was so scared so thanks
5th time im coming back to this video, i love you!
thank you you solved my problem in first 40 seconds of video. will watch it till the end anyway till as a small thank you
You are welcome. Thanks for the favour.
Major shoutout to the guy in the comments for reminding me to open subtitles and it actually worked thank you so much
I have a recent issue, Changing volume from the headset swaps the side where the volume comes from. Can still hear from both sides but other one is always louder.
this was great ive been trying for months how to figure this out aha. big thumbs up
Man i love you, i thought my dongle was dead for months, been using it in a bluetooth mode which is fine but mic sucks, thank you for for posting this
Glad to help. Hope you appreciated enough to subscribe 🦐
@@TheProvokedPrawn i have a big problem my Bluetooth works but when i want lightspeed i just prrss muutr button than cyan colour os on for 3 seconds then it starts blinking with cyan. When i try to hear soemthing it doesn't work. Any advice how to fix it?
@@froschstar4822 Same here
@@froschstar4822hello,i have the same problem,did you solve it?
Thanks so much bro my headset just didn't have audio anymore and this fixed it you get a sub and a like
Thanks for the sub
This helped me now. I was having issues with my G435 when trying to use it for a Zoom call. I was worried it's broken. Sheesh I just had to press the mute button for a few seconds and it connected again. I did do a restart and disconnect of the Dongle before this. Anyways, this headset is both great and a nightmare sometimes.
This video has helped me so many times! ever since it was posted lol!
Thank you so much it took me around 30 mins without the video and 30 seconds with the video🎉
Glad it helped!
Thank you SO MUCH for this oh my god. I feel so stupid. I've been sitting here for half an hour trying to work out if it's a driver issue. It was just a human issue. I appreciate this so much
Definitely not you. It's a stupid design.
holy shit, YOU ARE A LIFESAVER, you have earned yourself a sub!
Thank you so much!! I was having trouble connecting my headphones to my pc.
Glad I could help!
that worked brother thx for help
finnaly i can enjoy the g435 without bluetooth
Nice. switching modes with the mute button worked first try, after leaving it in the box for 8 months cause I didn’t know how to connect it.
Followed the steps multiple times and it worked. Now I understand why they were in special for $22 😂
thank you so much!!! i was starting to think that this headset wasn't compatible with the ps3, glad i was wrong!! it works perfectly
Thank you. Toddler managed to absolutely baffle me.
I got it today and everything is perfect but.. The dongle barely got into the usb port of my PC, it works though, but I'm concerned now that it will damage itself over time. does it have to slide in perfectly? I had to kinda force it in, wiggling it a bit till the end.
YOUR A LIFE SAVER!!!!!!!!!! I THOUGHT MY HEADSET WAS GONE.....
Glad to help
THANK YOU Been trying to figure this out for a week.. You ROCK
thank you!!!! I was about to throw my headset in the trash bin.
My 3 year old son had it and it didn`t connect, after he gave it back to me.
In the end, he had switched to Bluetooth mode. I didn`t read about the trick with pressing the Mic button...
Enjoy your day!
No problems. The design is pretty frustrating!
Thank you for your help,,,finally my headset is working again
thank you, seen people hate on this headset and it made me think i made the wrong choice buying it. fix was easy and i was using the Ps5
Glad it helped
Helped so much , didnt realise u had to hold mute button to switch from my phones bluetooth to my pcs dongle. I thought it was broken or sthn.
1. Shut down headphones [ turn off your headphones ]
2. Insert the dongle [ take off your usb dongle then re insert on your usb port ]
3. Press power button for 2 sec( green light will blink) [ it means to power on your headphones till you see green light ]
4. Press power + mute for Bluetooth pairing mode(blue led will blink) [ power + mute button till its blue light ]
5. Hold mute button to connect to dongle( led will turn cyan) [ self explanatory you hold the mute button till its cyan ] enjoy this works for pc too im a pc gamer thank you sir @
The Provoked Prawn
this helped me so much i have had this headset and didnt know how to connect it and i have been using a heaset that only one side works. thanks alot
Glad to help!
bro thank you so much your a savior my headset randomly stopped putting audio out this fixed i switched the bluetooth mode tysm bro ❤
You're welcome
The subtitles on this video really helped 🙉🙉
bro saved my life
Glad to help
Light won't turn cyan for me
my headset will turn on and off it gives me a green light and the startup noise. but when i press any buttons, on/off, mute, volume nothing happens, lights don't turn on volume does not come out nothing seems to be connecting. this method doesn't work the cyan light won't come on the green light doesn't reappear. anything I'm doing wrong I'm very confused.
Thanks. this helped with me switching connections from bluetooth to dongle!
Thanks for the Video, this just fixed my Problem :)
Best video ever when my headset changed over to Bluetooth I couldn’t fix it and this video showed me how to otherwise I would’ve wasted a lot of money 👍🏼🙌🏼
Great Vid. Thanks now the Headset ist working
I lost the usb and bought a new one but i don't know how to get them to pair
thanks a lot ! worked perfectly. They really need to stop hiding features like these.
You're welcome!
bro I thought they're already gone, tysm!
THANK YOU VERY MUCH I HAD MY HEADPHONES ON BLUETOOTH MODE AND THEN WHEN I TURNED THEM ON PC MODE IT WORKES THANK YOUU
I needed this minutes before a meeting, thanks!