How to Replace Front Upper Ball Joints 1995-2004 Toyota Tacoma

Поделиться
HTML-код
  • Опубликовано: 16 окт 2024
  • Buy Now!
    New Ball Joint from 1AAuto.com 1aau.to/ia/1ASB...
    This video shows you how to install new, quality TRQ ball joints on your 1995-2004 Toyota Tacoma. Car and truck suspensions combine a number of moving parts for safe and stable handling. The ball joint is the crucial moving component that ties those parts together. The ball-in-socket joint can wear out and loosen over time. Or, the rubber protective boot can tear, allowing contaminants to seize the joint. Bad ball joints are a common failure point on vehicle inspections because they lead to unsafe driving conditions. Fortunately, they are relatively easy to replace with the right know-how.
    Estimated installation time for a professional technician is approximately: 2 hours 12 minutes
    This repair was done on a 2001 Toyota Tacoma Base 2.4L Extended Cab Pickup 2-Door RWD Automatic and the process should be similar on the following vehicles:
    1995 Toyota Tacoma
    1996 Toyota Tacoma
    1997 Toyota Tacoma
    1998 Toyota Tacoma
    1999 Toyota Tacoma
    2000 Toyota Tacoma
    2001 Toyota Tacoma
    2002 Toyota Tacoma
    2003 Toyota Tacoma
    2004 Toyota Tacoma
    Tools you will need:
    • Pry Bar 1aau.to/oabI/1A...
    • 13mm Wrench 1aau.to/oagw/1A...
    • 21mm wrench
    • 10mm Socket 1aau.to/obNM/1A...
    • 12mm Socket 1aau.to/ocfw/1A...
    • 19mm Socket
    • 21mm Socket
    • Wire Cutters
    • Ratchet 1aau.to/ocgi/1A...
    • Torque Wrench 1aau.to/obiR/1A...
    • Floor Jack 1aau.to/oaDb/1A...
    • Hammer
    • Jack Stands 1aau.to/oapQ/1A...
    • Pole Jack
    • Wheel Chocks
    Subscribe: / @trq
    ⚠ DISCLAIMER:
    While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
  • Авто/МотоАвто/Мото

Комментарии • 2

  • @TRQ
    @TRQ  4 месяца назад

    √ Watch the Video
    √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
    √ Do it Yourself
    √ Save Money

  • @jimothy138
    @jimothy138 Месяц назад +2

    This is a 5 lug RWD tacoma, procedure is not the same for 4WD or prerunner.,