I am absolutely loving this series. Years ago, I followed as many tube frame build-threads as I could find. I was crazy about them and even ordered a race car chassis design book from the 60s in hopes of doing my own build one day. I had yet to see a well documented tube frame build on RUclips until I came across SK8215's build, and now yours. I'm really looking forward for what's to come!
THANK YOU SO MUCH FOR CONFIRMING WHAT I THOUGHT I KNEW. I had a vibration in my 68 Nova at speed and when I suspected the driveshaft and called a reputable vendor they told me 6 degrees down on the transmission output was too much and I needed to move it to under 3 degrees. I told them it should matter as long as my pinion is rotated up to match. They said this was incorrect and even with my LS it would vibrate if I set it more than 3 degrees. I argued about lifted and lowered vehicles and how they drop the transfer case or shim the pinion to match and I was told they would not help me until I corrected my transmission output angle. I beat myself up for months trying to figure out why this mattered, and you confirmed what I thought. Great videos I have been subscribing for a long time. Keep up the awesome work.
I've watched your videos for a few years now starting a while back to pick up welding tips. I've watched a number of different things you've fabricated and have always enjoyed and learned a lot from your videos. You always present material with a lot of great detail and explanations which help me to understand why you make certain choices. Your latest videos really hit me at a great time. I've been working on a '69 Mustang Coupe RestoMod since 2014 (it's now with the painter). I'm currently working on a '59 Apache for my daughter which will need the entire suspension to be replaced. Although, I don't need to do anything like what you're doing, it really helps to understand why certain things need to be done to get everything to operate properly. I love watching your videos and especially your current project, keep up the fantastic work and stay safe during these difficult times. Thanks, Derrick Hutchinson.
I really like how you have explained what you are doing and how your doing it and y your doing it that way. makes It a lot easier to understand,really love to set back and watch your channel .
Love this channel man, you're very informative and makes learning these processes a lot easier. I will be building a chassis jig now for building my "Time Attack" 95 TSI. Also thinking about starting a new channel to document the whole process. Thank you
so theres a handful of channels I watch for some gnarly tips in my field. Your obviously one of them, im amazed by how much information you keep putting out. I just started working again. as soon as I pay my rent again im donating money asap. I want you to do these videos as long as possible. Wish I lived near by so I could take a class.
I don't know how 36 fools can dislike this. You provided a great amount of info that not many of us may know about. Lookin forward seein those custom headers.👍
Carb intake manifolds are cast with 3 degrees built in but since engine angle is 3 the intake will measure at 0 when mounted in the car. All older cars engine and trans are mounted 1 inch to passenger side for steering shaft clearance . If your driveline is perfectly straight trans to differential the rollers in the u joints wont spin.
Your last sentence is the important one, and is the reasoning for the angle in the carb flange. The engines weren't pitched to level the carb, the carb flange was pitched to level the carb. The output of the trans and the input of the differential need to match/oppose (ex: 3 degrees down on output, input is 3 degrees up). And MANY older cars had the engine offset, not all.
Sweet!!! You got the mandrel attachment for the rogue bender! That would mean, thin wall, aluminum, or show quality... Ooh... I'm excited for the next episode!!
Great video thanks! Working on installing a Buick V-6 and T5 into a ‘31 Model A pickup, and it’s been a head scratcher. Previous owner really did a hack job on it, and I’m trying to fix all the mistakes.
I love the way you explain all this stuff , so easy to follow. Being an apprentice welder wanting to get automotive this is amazing content so thank you.
When building drivetrain from scratch and talking about engine angels. I think it's also important to mention the importance of drive shaft angels and line up. And if you can't laser line up gearbox output flenge to the diff you need to make sure that the driveshaft U-joints have the equal amount of angel on each end (at least within spec) to prevent severe vibration. Angled driveshafts increase and decrease speed twice for each revolution. So it's important to allow both ends of the shaft to increase and decrease speed the same amount.
I love that your making automotive videos. I remember when I first subbed to the channel, you were making cages and such in your garage. This thing is gonna be the Hoonitruck, but on a much lighter platform. Can’t wait!!!
First, I'm loving this video series. I'll be building a new frame for my 48 Willys later this summer and I'm learning a lot here. A good example of a vehicle where the engine is offset from the vehicle centerline are the early Jeeps. All of the flathead powered models had the engine and trans offset 1.5 inches to the driver's side of the chassis to get the driveline to fit inside the _very_ narrow chassis. As for the pitch angle, you want the pitch angle of the engine/trans/transfer case (if fitted) to match the pinion angle of the rear axle. and DO NOT point the trans/transfer output directly at the rear diff.The reason for this is simply U-Joints. The physics of how u-joint works is that they speed up and slow down during specific angles of rotation as they turn through a single revolution. If the front and rear of the driveshaft aren't parallel (as seen from the side _and_ top, the driveshaft will have an annoying vibration that will be impossible to get rid of. If the trans/transfer output are exactly lined up with the pinion, it causes problems with the u-joints themselves. I don't recall ATM exactly what the issue is, it might be a binding issue, but I'm not positive. Whatever it is, it will wreck the u-joints in short order. As an aside, I learned pie cuts from your videos and made a set of double-Y headers for the V6 in my Willys. Thank you for the lessons!
I literally know next to nothing about building cars or trucks, more of a motorcycle guy, but this is very informative. Plus I have a sweet job opportunity coming up as a welder at a fab shop that does custom Jeep work and other automotive stuff, so this is technically research.
Great stuff, love the videos. I pretty much watch all your content, going back years. Looking forward to the rest. One thing though, raising or lowering the engine doesn't affect the roll center. Roll center is determined by suspense geometry. It is the axis by which the body rolls. Maybe you're thinking of center mass. Raising the engine will raise the center of mass and likely increase body roll while cornering, but not change the roll center.
I tend to use terms people reference whether completely right or wrong. I'll address that in a future vid since its technically irrelevant at the moment.
@@TheFabricatorSeries how about just saying "top heavy" thats one we all can wrap our noodles around instead of whatever it was dude said in the original comment here. I like the way you teach things, you give a basic overall summary of everything you need to do/pay attention to then you go in depth on each section of the build as it comes up in order. Cover everything but its not overwhelming like some other fancy pants people do. LoL 😆
Doin a 09gt-500 swap into a 72 F-100 and this drive train sits over to the passenger side. I was taken back until I did more research and it’s factory ... I enjoyed the info brother.
A lot of the 80’s gm chassis actually had the front crossmember offset about 3/4” to the right which set the engine and trans offset in the chassis. I’ve been told it was to make the U joints work, steering shaft clearance.. etc. not sure why but I’ve confirmed that it is. Interesting stuff!
I love it. When I mounted my engine all I used was a plum bob, tape measure, marker and a lot of reassurance on my measurements. First time doing it and seems like I did pretty good but Hopefully it works out. Still doing the wiring.
Brilliant so well explained but very technical but it has to be right at the end of the day well done buddy can’t wait for the next video cheers Larrysullivan in London
I’m building a 84 Datsun 200sx and I’ve been worried about the orientation and you’ve been a huge help, I have a 350 SBC I’m throwing in it so I’m a lot less stressed making mounts for it
Hey, you should go ahead and do the water pump and timing chain if you haven’t already. Also stock plugs are motor craft SP534 plugs, go ahead and get the next range colder of SP542 and gap them between 0.026-0.028, it’ll help with idle stumble and rev hang.
Eco boost 3.5’s wear out spark plugs early, around 60-75k. The water pump on his engine is external, not like the explorer and sho. Would be a good idea to at least pull valve covers to see if engine is clean. If not I’d pull cam phaser solenoids and clean or replace them.
Dont take this comment the wrong way. The ls engine is an amazing and easy platform. That being said...thank you for the love of god for being original and NOT using it.
Not a fan of the engine choice, but also agree 100%. No, I don;t know what I'd drop in but yes SB(whatever) and LS are WAY to common. Nice to be different!
I just started welding as hobby and love your channel, you inspire me a lot but have a question and cant find answer. Can i buy plasma cutting torch and use it with my tig/mma welder with compressor instead of argon?
I knew it was a ford transmission from last video. I was thinking 2.3 eco boost, but you got the big daddy eco boost. Should be an awesome build, that engine makes so much low end it’ll probably be breaking the tires loose everywhere!
As a retired mathematician who used to race rally cars and built the last one with help, I got a mild hard on when you mentioned "Euler" angles (pronounced "Oiler"). You did a good job of explaining the basics. Try aligning a prop shaft in a trawler - that is bigger than Ben Hur!
Thank you for this video, finally some answers that make sense. Level at the base of the carburetor, makes all the sense in the world... I've had multiple guys, tell me multiple things....3 degrees, 6 degrees... Thanks.
I'm doing almost the samething to my 95 hardbody, new chassis, new drivetrain which I dont have yet and new layout, going AWD, I'm so pumped to see how u finish this one my instructor
Are you using the original suspension? I have a 4x4 and been dreaming of converting to coilovers, long arms front and 4 link rear. These truck could use more wheel travel.
I know your not drag racing. But, I found placing the engine Y to the driver side as much as you can,(at least HBody cars Door slammers) helps from twisting the car up like a pretzel on launch. Loving your Channel a lot of good info here.
Thanks for the video... Any idea about the pitch angle for a 4.3 v6 gen 1 fuel injection GM engine with th700r4 transmission in a 1976 cj7 jeep? I know the engine has to be about 1.5" towards the drivers side (to allow front driveshaft room) and that the engine needs to be at 5-7 degree tilt back too. Thanks again.
Interesting choice for engine I started watching your channel for the fab tech and ideas and truly appreciate the build you have started. I'm presently building a '76 Datsun 620 and phase 2 of the build will be improving the motivation - I hadn't considered the EcoBoost before but I have been thinking V6 Turbo...
This is good stuff I love that you're going a different route than most with the powertrain. I probably would have went with the 2nd gen 3.5 so you would have port injection along with direct for when you decide to start making big power as the direct injection alone has it limits. I have a 2011 gen 1 3.5 eco in my flex and it moves it around nicely for its size
Absolutely LOVE this series! And you're doing great self filming! Keep up the good work. Your content is even better while we are trapped at home! LOL!
Most vehicles have their engines mounted slightly offset to the passenger side, Makes RHD vehicle conversions slightly more difficult as there's less room for steering components and also the weight bias with engine and driver being to the right of the centre line.. Same reason some LHD drag vehicles in RHD countries are preferred as driver weight opposes torque reaction.. Also, gearbox output and pinion angles should be aligned at ride height.. Awesome build👊
FYI, many Chrysler passenger cars from the 1960s - 1970s were built with the engine positioned an inch or so to the right side (not centered) to allow clearance for the steering shaft and brake master cylinder power booster.
Hey man. Love the channel and love it more now with the EB swap. I swapped a 3.5 into my 99 Mustang that I road race back in 2016. I wasn't doing videos back then unfortunately. But yeah, I pretty much had to figure out all these measurements when doing my swap. For weight distribution and steering shaft clearance I did shove the engine towards the passenger side as far as I could.
Hi there! Greetings from Brasil! I have to say: THANK YOU VERY MUCH SR!!!!! The only one in the hole Internet with the complete explanation!!!!! You got a new follower... no, you got a new FAN!!!!! Question: where do I find the correct "U angle" for my motor? Thank you, again!
I have a welding question. I have seen a few RUclips videos showing cold welding. Do you know what this method entails, and if it can and/or should be done with a TIG welder?
I'm a little late to your channel however this is by far the Best FABRICATION channel yet!! So much knowledge in every video and such amazing skills🤯! Thank you so much man keep up the amazing work/content 🔥🔥🔥💪💪👏🏼👍👌
I'm a member of creating a baja vehicle, but recently on a competition, I watched how some other teams have a particular way to install the engine, it remains with an angle. Do you know what are the effects of doing so?
One thing to bear in mind when setting the engine/gearbox angle (tilted up or down at the rear) is the diff pinion angle. For this build its not a problem as you will be able to adjust it. But if you were doing an engine conversion only and the pinion angle was not easily adjusted then you need you gearbox angle to match the pinion.
Justin love Your Work. You are a talented welder/engineer and presenter. if i can throw my twobobs worth in on your angles, one of the reasons the pitch angle or v angle is set is in correlation with the final drive pinion angle , if you are using a "Hotchkiss" Drive system (Spelling from memory) that entails cross and yoke universals, to prevent vibration the angles at normal ride height of the power unit and pinion should be as close to each other as possible. However if using a CV drive this is not as important. Just my takeon this, Looking forward to the next episode Cheers Mate. Michael./
Hello Justin, awesome illustration of how you are doing your build. Hopefully some good day you can do a Trike build with the engine in front. I’m really wanting to build one. I’m considering using a Subaru engine and rear end (Andrew).
What if your v-measurement with your trans tail shaft pointing too low and your rear axle is tucked up the chassis(lowered). How do you go about correcting the driveline angles? That’s one of my issues at the moment and thinking I’m going to have to redo my motor mounts and drop the front of the engine lower so it will allow the rear to point upwards so I can achieve better driveline angles.The way it sits, the trans is hitting the tunnel if rear section is raised. 🤦 I would hate to cut up the tunnel and redo it but I might have to.
Good video. Reading comments below. Agreed most engines offset to right side, even in race cars to help offset driver’s weight, 1/2” or so. Also, U joint comment is true, but by lining these angles up you will gain strength and efficiency, at the cost of service life of u joint due to not rotating.
Nice engine choice, not so common here in Australia but I happened to work on an Expedition with one fitted, I thought it went well in it's natural home, should be a weapon in a Triton. As for mounting the engine, most early Mazda rotaries are offset to the left side probably for exhaust clearance, and older Toyota Landcruisers point to the left noticeably I believe for front diff housing clearance.
Have watched numerous of your videos on tig welders etc. What is your opinion of the everlast 250 EX as a first tig machine? Im having a hard time justifying and extra $1000 for the 250 EXT Appreciate any insight and enjoying your chanel. Thanks Ernest from Montreal
Hi Justin, any updates on this awesome build? I'm on day 28 of full lockdown, and would watch you just rolling a welder towards your chassis jig 🤣 Looking forward to watching your dream truck come together. Stay safe! Cheers Aaron.
Great engine choice. The modern factory turbo engines have an immense amount of power headroom. Mid to upper three digit horsepower should be doable on stock internals. Of course the LS is a common swap for a big power upgrade, but that's the easy route. It's like building a Jeep for off road. Lots of people do it and there is a ton of aftermarket support, but it is be no means the only way to get the job done, especially if you want something different.
Also XDi-60 high pressure fuel pump is hard to beat and DuetschWorks makes 1700cc matched injectors. The torque curve on the horizontal ecoboost is phenomenal. The thing makes a ton of stink in my 2015 expedition.
I am absolutely loving this series. Years ago, I followed as many tube frame build-threads as I could find. I was crazy about them and even ordered a race car chassis design book from the 60s in hopes of doing my own build one day. I had yet to see a well documented tube frame build on RUclips until I came across SK8215's build, and now yours. I'm really looking forward for what's to come!
Get that little pink Fiero finished! Between you and Bad Obsession, we're all going crazy!
This build is the best thing on the youtube right now!!
How dare you disrespect Project Binky like, go stand in the corner and think about what you have done. ;P
You have not seen papadakis racing
@@digginaustin Oh I have, not a BMW fan though, but the amount of work they put into that BMW is pretty sweet.
Gotcha
I was more just referencing it's quality of content
THANK YOU SO MUCH FOR CONFIRMING WHAT I THOUGHT I KNEW. I had a vibration in my 68 Nova at speed and when I suspected the driveshaft and called a reputable vendor they told me 6 degrees down on the transmission output was too much and I needed to move it to under 3 degrees. I told them it should matter as long as my pinion is rotated up to match. They said this was incorrect and even with my LS it would vibrate if I set it more than 3 degrees. I argued about lifted and lowered vehicles and how they drop the transfer case or shim the pinion to match and I was told they would not help me until I corrected my transmission output angle. I beat myself up for months trying to figure out why this mattered, and you confirmed what I thought. Great videos I have been subscribing for a long time. Keep up the awesome work.
I've watched your videos for a few years now starting a while back to pick up welding tips. I've watched a number of different things you've fabricated and have always enjoyed and learned a lot from your videos. You always present material with a lot of great detail and explanations which help me to understand why you make certain choices.
Your latest videos really hit me at a great time. I've been working on a '69 Mustang Coupe RestoMod since 2014 (it's now with the painter). I'm currently working on a '59 Apache for my daughter which will need the entire suspension to be replaced. Although, I don't need to do anything like what you're doing, it really helps to understand why certain things need to be done to get everything to operate properly.
I love watching your videos and especially your current project, keep up the fantastic work and stay safe during these difficult times.
Thanks, Derrick Hutchinson.
I really like how you have explained what you are doing and how your doing it and y your doing it that way. makes It a lot easier to understand,really love to set back and watch your channel .
So glad I found this video. We are starting next week to put a gen 3 Hemi with a motor plate in a 1974 Challenger no prep car.
Best series online right now, hands down. Looking forward to the next video!
Quite simply the most useful and concise video on this subject I've seen. Thanks from the UK!
Love this channel man, you're very informative and makes learning these processes a lot easier. I will be building a chassis jig now for building my "Time Attack" 95 TSI. Also thinking about starting a new channel to document the whole process. Thank you
so theres a handful of channels I watch for some gnarly tips in my field. Your obviously one of them, im amazed by how much information you keep putting out. I just started working again. as soon as I pay my rent again im donating money asap. I want you to do these videos as long as possible. Wish I lived near by so I could take a class.
A lot of very important info that any want2be chassis builder needs to know. Thank you, JD
I don't know how 36 fools can dislike this. You provided a great amount of info that not many of us may know about. Lookin forward seein those custom headers.👍
Lovin the detail to the small stuff that need to be sorted on these builds!!!
Carb intake manifolds are cast with 3 degrees built in but since engine angle is 3 the intake will measure at 0 when mounted in the car. All older cars engine and trans are mounted 1 inch to passenger side for steering shaft clearance . If your driveline is perfectly straight trans to differential the rollers in the u joints wont spin.
Your last sentence is the important one, and is the reasoning for the angle in the carb flange. The engines weren't pitched to level the carb, the carb flange was pitched to level the carb. The output of the trans and the input of the differential need to match/oppose (ex: 3 degrees down on output, input is 3 degrees up).
And MANY older cars had the engine offset, not all.
Sweet!!! You got the mandrel attachment for the rogue bender! That would mean, thin wall, aluminum, or show quality... Ooh... I'm excited for the next episode!!
Nothing but sweetness!!! This build has been fun to watch!!!
Ecoboost turbo v6, 6spd, 8.8 diff, in a lightweight tube chassis pickup truck...AWESOME!!
Right? Gonna be a terror on the streets
This is definitely a series I will be saving. I have a dream build I would like to accomplish and this just might help me see it to fruition. 👍
Great video thanks! Working on installing a Buick V-6 and T5 into a ‘31 Model A pickup, and it’s been a head scratcher. Previous owner really did a hack job on it, and I’m trying to fix all the mistakes.
I'm definitely going to use this video when I start my senior project for my program. tube chassis bimmer here we come
I love the way you explain all this stuff , so easy to follow. Being an apprentice welder wanting to get automotive this is amazing content so thank you.
I’m very excited for this series.
Thank you.
Love your content, man. Great, practical stuff that I haven't seen other people covering in-depth on youtube.
When building drivetrain from scratch and talking about engine angels. I think it's also important to mention the importance of drive shaft angels and line up. And if you can't laser line up gearbox output flenge to the diff you need to make sure that the driveshaft U-joints have the equal amount of angel on each end (at least within spec) to prevent severe vibration. Angled driveshafts increase and decrease speed twice for each revolution. So it's important to allow both ends of the shaft to increase and decrease speed the same amount.
I need to back up and watch the series from the beginning but I’m still working.
Great stuff here
Love the way you teach.... so easy to watch and learn. a+
And here I was thinking I should ls swap my 300zx but you woke up the idea that I had in the beginning, I worked on these engines and they’re great
I love that your making automotive videos. I remember when I first subbed to the channel, you were making cages and such in your garage. This thing is gonna be the Hoonitruck, but on a much lighter platform. Can’t wait!!!
First, I'm loving this video series. I'll be building a new frame for my 48 Willys later this summer and I'm learning a lot here. A good example of a vehicle where the engine is offset from the vehicle centerline are the early Jeeps. All of the flathead powered models had the engine and trans offset 1.5 inches to the driver's side of the chassis to get the driveline to fit inside the _very_ narrow chassis. As for the pitch angle, you want the pitch angle of the engine/trans/transfer case (if fitted) to match the pinion angle of the rear axle. and DO NOT point the trans/transfer output directly at the rear diff.The reason for this is simply U-Joints. The physics of how u-joint works is that they speed up and slow down during specific angles of rotation as they turn through a single revolution. If the front and rear of the driveshaft aren't parallel (as seen from the side _and_ top, the driveshaft will have an annoying vibration that will be impossible to get rid of.
If the trans/transfer output are exactly lined up with the pinion, it causes problems with the u-joints themselves. I don't recall ATM exactly what the issue is, it might be a binding issue, but I'm not positive. Whatever it is, it will wreck the u-joints in short order. As an aside, I learned pie cuts from your videos and made a set of double-Y headers for the V6 in my Willys. Thank you for the lessons!
I literally know next to nothing about building cars or trucks, more of a motorcycle guy, but this is very informative. Plus I have a sweet job opportunity coming up as a welder at a fab shop that does custom Jeep work and other automotive stuff, so this is technically research.
Great stuff, love the videos. I pretty much watch all your content, going back years. Looking forward to the rest. One thing though, raising or lowering the engine doesn't affect the roll center. Roll center is determined by suspense geometry. It is the axis by which the body rolls. Maybe you're thinking of center mass. Raising the engine will raise the center of mass and likely increase body roll while cornering, but not change the roll center.
I tend to use terms people reference whether completely right or wrong. I'll address that in a future vid since its technically irrelevant at the moment.
@@TheFabricatorSeries how about just saying "top heavy" thats one we all can wrap our noodles around instead of whatever it was dude said in the original comment here. I like the way you teach things, you give a basic overall summary of everything you need to do/pay attention to then you go in depth on each section of the build as it comes up in order. Cover everything but its not overwhelming like some other fancy pants people do. LoL 😆
I agree with this. It’s changing the mass centroid axis. Roll centre is purely set by suspension geometry.
There's so much to this to actually get through to most people tbh
I like the overview at the end. This helps keep the goals in perspective.
Nice my last service van had an ecoboost and it would absolutely scoot. Too many LS swaps out there, it's awesome that you are being different!!!
Doin a 09gt-500 swap into a 72 F-100 and this drive train sits over to the passenger side. I was taken back until I did more research and it’s factory ... I enjoyed the info brother.
lightweight platform and turbo power, it should scoot indeed. awesome project, it's tough to wait for the videos but looking forward to all of them.
A lot of the 80’s gm chassis actually had the front crossmember offset about 3/4” to the right which set the engine and trans offset in the chassis. I’ve been told it was to make the U joints work, steering shaft clearance.. etc. not sure why but I’ve confirmed that it is. Interesting stuff!
A lot of Rear wheel drive engines are off set to the Passengers side to maintain a straight centerline with a the rear differential.
I love it. When I mounted my engine all I used was a plum bob, tape measure, marker and a lot of reassurance on my measurements. First time doing it and seems like I did pretty good but Hopefully it works out. Still doing the wiring.
Brilliant so well explained but very technical but it has to be right at the end of the day well done buddy can’t wait for the next video cheers Larrysullivan in London
I’m building a 84 Datsun 200sx and I’ve been worried about the orientation and you’ve been a huge help, I have a 350 SBC I’m throwing in it so I’m a lot less stressed making mounts for it
Hey, you should go ahead and do the water pump and timing chain if you haven’t already. Also stock plugs are motor craft SP534 plugs, go ahead and get the next range colder of SP542 and gap them between 0.026-0.028, it’ll help with idle stumble and rev hang.
You a tech, or just been through it with the same engine?
Eco boost 3.5’s wear out spark plugs early, around 60-75k. The water pump on his engine is external, not like the explorer and sho. Would be a good idea to at least pull valve covers to see if engine is clean. If not I’d pull cam phaser solenoids and clean or replace them.
Great info, nice to see you using some flux core on the quick and easy bits!!
Desperately awaiting the next part to this
Dont take this comment the wrong way. The ls engine is an amazing and easy platform. That being said...thank you for the love of god for being original and NOT using it.
you cant even buy a vehicle in the UK with a LS, how do our cars even work!!!!!!!
@@krusher74 lol hey but you guys have some killer ass diesel engines we can't have 😉
@@bobross07 nah, I'd prefer a duramax or proper power stroke over the weedy little diesels we have these days
@@krusher74 You got a very small number of Vauxhall badged holdens with LSs
Not a fan of the engine choice, but also agree 100%. No, I don;t know what I'd drop in but yes SB(whatever) and LS are WAY to common. Nice to be different!
Absolutely brilliant love this guy he knows what he’s talking about I can’t wait to see more cheers Larrysullivan in London
I just started welding as hobby and love your channel, you inspire me a lot but have a question and cant find answer. Can i buy plasma cutting torch and use it with my tig/mma welder with compressor instead of argon?
I knew it was a ford transmission from last video. I was thinking 2.3 eco boost, but you got the big daddy eco boost. Should be an awesome build, that engine makes so much low end it’ll probably be breaking the tires loose everywhere!
Amazing video man the information you give is very helpful thanks for breaking it all down. Cant wait to see your truck done.
Great video, especially the explanation of the various angles and roll axes.
As a retired mathematician who used to race rally cars and built the last one with help, I got a mild hard on when you mentioned "Euler" angles (pronounced "Oiler"). You did a good job of explaining the basics. Try aligning a prop shaft in a trawler - that is bigger than Ben Hur!
Thank you for this video, finally some answers that make sense. Level at the base of the carburetor, makes all the sense in the world...
I've had multiple guys, tell me multiple things....3 degrees, 6 degrees...
Thanks.
I'm doing almost the samething to my 95 hardbody, new chassis, new drivetrain which I dont have yet and new layout, going AWD, I'm so pumped to see how u finish this one my instructor
Are you using the original suspension? I have a 4x4 and been dreaming of converting to coilovers, long arms front and 4 link rear. These truck could use more wheel travel.
@@rideakhomie I have a design for a Baja style setup if u like
I know your not drag racing. But, I found placing the engine Y to the driver side as much as you can,(at least HBody cars Door slammers) helps from twisting the car up like a pretzel on launch. Loving your Channel a lot of good info here.
Dang! That's a great explanation of things and stuff. You got all the good toys. I dig it!
Thanks for the video...
Any idea about the pitch angle for a 4.3 v6 gen 1 fuel injection GM engine with th700r4 transmission in a 1976 cj7 jeep?
I know the engine has to be about 1.5" towards the drivers side (to allow front driveshaft room) and that the engine needs to be at 5-7 degree tilt back too.
Thanks again.
Great lead in to the new bender. Cant wait. It looks sweeeeeet !
Interesting choice for engine
I started watching your channel for the fab tech and ideas and truly appreciate the build you have started. I'm presently building a '76 Datsun 620 and phase 2 of the build will be improving the motivation - I hadn't considered the EcoBoost before but I have been thinking V6 Turbo...
This is good stuff I love that you're going a different route than most with the powertrain. I probably would have went with the 2nd gen 3.5 so you would have port injection along with direct for when you decide to start making big power as the direct injection alone has it limits. I have a 2011 gen 1 3.5 eco in my flex and it moves it around nicely for its size
What do you do if you want to build a custom body? Can you build your chassis first then your body? Love the video’s you taught me a lot thank you
Absolutely LOVE this series! And you're doing great self filming! Keep up the good work. Your content is even better while we are trapped at home! LOL!
Most vehicles have their engines mounted slightly offset to the passenger side, Makes RHD vehicle conversions slightly more difficult as there's less room for steering components and also the weight bias with engine and driver being to the right of the centre line..
Same reason some LHD drag vehicles in RHD countries are preferred as driver weight opposes torque reaction..
Also, gearbox output and pinion angles should be aligned at ride height..
Awesome build👊
FYI, many Chrysler passenger cars from the 1960s - 1970s were built with the engine positioned an inch or so to the right side (not centered) to allow clearance for the steering shaft and brake master cylinder power booster.
Hey man. Love the channel and love it more now with the EB swap. I swapped a 3.5 into my 99 Mustang that I road race back in 2016. I wasn't doing videos back then unfortunately. But yeah, I pretty much had to figure out all these measurements when doing my swap. For weight distribution and steering shaft clearance I did shove the engine towards the passenger side as far as I could.
Hi there! Greetings from Brasil! I have to say: THANK YOU VERY MUCH SR!!!!! The only one in the hole Internet with the complete explanation!!!!! You got a new follower... no, you got a new FAN!!!!! Question: where do I find the correct "U angle" for my motor? Thank you, again!
Turbos going to be awsome build can't wait to see.
ford mod motors are offset toward the passenger side to clear the steering rack. good vid!
I love the engine choice I almost put one in my Miata but I had a question. I thought some pinion angle was needed to eliminate driveshaft hum?
correct, you need both pinion angles to be the same to be balanced. cant have them at zero
Nice engine choice, I think you'll have a lot of fun with the truck with that in it
Oh the Big Dog bender!! Nice. Nice motor choice, I know a guy who gets 917HP out of one of those. Should be interesting.
I have a welding question. I have seen a few RUclips videos showing cold welding. Do you know what this method entails, and if it can and/or should be done with a TIG welder?
got some good tools there. I enjoy your channel. Ive just started out tig welding. been doing a few alluminium projects.
Extremely good info- glad I found this!
Hey justin great educational videos love the whole series and everything you do man ... keep it classy and rock on
Talk about quality content! I love your videos.
You explain things really well.
Is the pitch of motor/trans not relevant to drive shaft alignment? Or can the ujoints just take it without excessive wear?
I'm a little late to your channel however this is by far the Best FABRICATION channel yet!! So much knowledge in every video and such amazing skills🤯! Thank you so much man keep up the amazing work/content 🔥🔥🔥💪💪👏🏼👍👌
I'm a member of creating a baja vehicle, but recently on a competition, I watched how some other teams have a particular way to install the engine, it remains with an angle. Do you know what are the effects of doing so?
One thing to bear in mind when setting the engine/gearbox angle (tilted up or down at the rear) is the diff pinion angle. For this build its not a problem as you will be able to adjust it. But if you were doing an engine conversion only and the pinion angle was not easily adjusted then you need you gearbox angle to match the pinion.
Foxbodys are an example of being offset from the centerline of the car.
Justin love Your Work. You are a talented welder/engineer and presenter. if i can throw my twobobs worth in on your angles, one of the reasons the pitch angle or v angle is set is in correlation with the final drive pinion angle , if you are using a "Hotchkiss" Drive system (Spelling from memory) that entails cross and yoke universals, to prevent vibration the angles at normal ride height of the power unit and pinion should be as close to each other as possible. However if using a CV drive this is not as important. Just my takeon this, Looking forward to the next episode
Cheers Mate.
Michael./
Hello Justin, awesome illustration of how you are doing your build. Hopefully some good day you can do a Trike build with the engine in front. I’m really wanting to build one. I’m considering using a Subaru engine and rear end (Andrew).
What if your v-measurement with your trans tail shaft pointing too low and your rear axle is tucked up the chassis(lowered). How do you go about correcting the driveline angles? That’s one of my issues at the moment and thinking I’m going to have to redo my motor mounts and drop the front of the engine lower so it will allow the rear to point upwards so I can achieve better driveline angles.The way it sits, the trans is hitting the tunnel if rear section is raised. 🤦 I would hate to cut up the tunnel and redo it but I might have to.
Bro thank you!!! I was trying to figure out how to put this flat 6 in this Nissan for the longest
Oooo, an upgrade from the M600 Rogue... will be interested to see how you like it.
let’s say my garage floor is level… should the vehicle itself be level on stands or should it be sitting on its suspension and tires?
Looking great! And damn I need to see more on that Mandrel bender!
Good video. Reading comments below. Agreed most engines offset to right side, even in race cars to help offset driver’s weight, 1/2” or so. Also, U joint comment is true, but by lining these angles up you will gain strength and efficiency, at the cost of service life of u joint due to not rotating.
Nice engine choice, not so common here in Australia but I happened to work on an Expedition with one fitted, I thought it went well in it's natural home, should be a weapon in a Triton.
As for mounting the engine, most early Mazda rotaries are offset to the left side probably for exhaust clearance, and older Toyota Landcruisers point to the left noticeably I believe for front diff housing clearance.
Have watched numerous of your videos on tig welders etc. What is your opinion of the everlast 250 EX as a first tig machine? Im having a hard time justifying and extra $1000 for the 250 EXT
Appreciate any insight and enjoying your chanel.
Thanks Ernest from Montreal
Hopefully you ordered the oil pickup and gaskets also with that pan. :)
Love the engine choice.
Man I love your vids... can’t get enough!!!
Hi Justin, any updates on this awesome build?
I'm on day 28 of full lockdown, and would watch you just rolling a welder towards your chassis jig 🤣
Looking forward to watching your dream truck come together.
Stay safe!
Cheers Aaron.
Great engine choice. The modern factory turbo engines have an immense amount of power headroom. Mid to upper three digit horsepower should be doable on stock internals. Of course the LS is a common swap for a big power upgrade, but that's the easy route. It's like building a Jeep for off road. Lots of people do it and there is a ton of aftermarket support, but it is be no means the only way to get the job done, especially if you want something different.
Another great video mate !!! Thanks for sharing your knowledge 👍
Awesome work and thank you for your knowledge
Love it. Cant wait to see more progress.
Loving all this info, keep up the great work
Wow - PACKED with good information!
Also XDi-60 high pressure fuel pump is hard to beat and DuetschWorks makes 1700cc matched injectors. The torque curve on the horizontal ecoboost is phenomenal. The thing makes a ton of stink in my 2015 expedition.
I knew it!!! I saw it the other day and said that's a dadgum EcoBoost lmao. I love it bo. Can't wait to see it going.