Great progress . When you were pulling sideways it was dragging the car, a piece of 4x4 timber against the tree and the wheel centre would have give you a bit more anchorage . You have persevered with it and you have got it pretty good ,now a bit of welding and it will be sorted .Well done for giving this car another chance.
I was going to tie it to the panda but it was pulling the crease out so I just went with it. It was my first time so I’ll take on board what you’ve said for next time. Thanks for the support also 👍
Richard Mounfield it was my first time doing anything like that. I normally just replace bolt on stuff but you don’t know what it’s like until you remove those panels.
Result. It's amazing how much you can do with a sturdy tree or lamp post and some DIY tools. With practice you'll find you can produce some pretty amazing results...
steven jones welding is done and I’ve just edited a video on the new lights and reassembling the front bumper. I will be onto the paint this week as it’s going to be nice. So it will be a future video.
Ahhh, the infamous whine on K-Series rovers 😁 I think it's the ECU that does it. Fun fact if you don't know already - these Rovers exhibit some very strange behaviour when the alternator is dieing or battery is a bit low. E.g wipers turning on and off by themselves, telephone-like alarm sounding when trying to start, boot flying open by itself on saloons when trying to start etc etc. It's pretty comical when they do it 😂 Don't be surprised if the streetwise does it after sitting around for a bit 👍
Great progress . When you were pulling sideways it was dragging the car, a piece of 4x4 timber against the tree and the wheel centre would have give you a bit more anchorage . You have persevered with it and you have got it pretty good ,now a bit of welding and it will be sorted .Well done for giving this car another chance.
I was going to tie it to the panda but it was pulling the crease out so I just went with it. It was my first time so I’ll take on board what you’ve said for next time. Thanks for the support also 👍
@@everydaysalvage You have done well . Its not easy when your doing it all on your own you always feel like you could do with a second pair of hands.
Richard Mounfield it was my first time doing anything like that. I normally just replace bolt on stuff but you don’t know what it’s like until you remove those panels.
Result. It's amazing how much you can do with a sturdy tree or lamp post and some DIY tools. With practice you'll find you can produce some pretty amazing results...
Absolutely! , Thank you for your kind support.
Lovely Jubbly, a block of wood usually helps, it also absorbs the noise.
Do you mean for beating the panel?
can sum one show me how to pull the other way?
You definitely getting there 👍
Thank you for you’re support.
Hi,it looks alot better than before,weld the holes and bit of spray?be good as new.
steven jones welding is done and I’ve just edited a video on the new lights and reassembling the front bumper. I will be onto the paint this week as it’s going to be nice. So it will be a future video.
Everyday Salvage,can’t wait to see the next video.👍
Ahhh, the infamous whine on K-Series rovers 😁 I think it's the ECU that does it.
Fun fact if you don't know already - these Rovers exhibit some very strange behaviour when the alternator is dieing or battery is a bit low. E.g wipers turning on and off by themselves, telephone-like alarm sounding when trying to start, boot flying open by itself on saloons when trying to start etc etc. It's pretty comical when they do it 😂
Don't be surprised if the streetwise does it after sitting around for a bit 👍
Never had that before , had a 214 back in the day and that had issues but was down to the immobiliser and not having a fob.
They are turds I would have left it in the breakers yard. Fuseboxes also randomly melt and headgaskets.
Nice job there mate
Thank you Alex
Getting there dude
Thank you for your support
Well i never mr j 😉
please report and block people like brian wilson from spoiling your channel
chris cocker why what has he done? I’ve had a few spam messages this morning. Do you mean that ?
@@everydaysalvage they are always putting messages for porn sites if they want to watch it let them but not bombard our car channels thats all
Yes your right. I have block and removed those comments also reported them as spam. I thought they had stopped but I guess not.
I reported this filth as well on another video. I think it's a bot as it's usually the same sites under different fake names