Set CrossFlight/Mini Pix/PIXHAWK on Helicopter / Episode 4 The First Flight of Helicopter
HTML-код
- Опубликовано: 11 сен 2024
- Set CrossFlight/Mini Pix/PIXHAWK on Helicopter / Episode 4 The First Flight of Helicopter
Hi, today I’m going to introduce Precautions for the first flight of a helicopter.
The debugging of software and hardware is already done in the tutorials before.
Take a computer when you go out to fly it to adjust parameters, and check whether the compass works well because the interference matters a lot for the compass
It is recommended to use a telemetry for parameter adjustment.
There are 2 steps for arming.
1.hold the throttle down and right for more than 4 seconds.
2.After hearing the beeping sound, push the unlock switch, the motor will start rotate.
Besides, you need to know about your flight modes. RadioLink AT9S Pro supports flight modes display on the screen.
Before taking off, please checking the correction direction carefully.
In stabilize mode, hold the helicopter and tilt it to see if the swash-plate moves in the opposite direction.
If any problem, you can check the related tutorials before to solve it.
It is GPS flight mode now.
Experienced pilots can use the stabilize mode to take it off.
Switch to Alt-hold and GPS mode in turn to test it.
Emergency handling: When the compass is interfered, the helicopter will fly in a certain direction. Please switch to Stabilize mode as soon as possible.
This is the video shot with one hand. The helicopter flies smoothly and stably.
Put the transmitter on the ground. Control the helicopter to spin and fly forward and backward with one hand.
It is recommended to install RadioLink CrossFlight on helicopter. That’s all about how to set CrossFlight on Helicopter
For more details of CrossFlight flight controller:
www.radiolink....
Purchase link of CrossFlight flight controller:
www.radiolink....
You can send emails to after_service@radiolink.com.cn if you have any questions when using our products.
#helicopter #pixhawk #radiolink #crossflight
Complete build video , could be appreciated 😊
Hi, sir. You can check the complete tutorials of CrossFlight and helicopter on our channel: www.youtube.com/@Radiolink_official/search?query=CrossFlight%20helicopter You can also check more details from the detailed manual of CrossFlight: www.radiolink.com/crossflight_manual If any question about RadioLink products please feel free to contact us. Our email is: after_service@radiolink.com.cn
I have made a hexa copter by using this flight controller but I am not able to do its PID tuning. Is there a feature of PID tuning in this flight controller?
Hi, sir. Sure you can adjust PID. Here is the guide to show how to adjust PID in CrossFlight: www.radiolink.com/newsinfo/475985.html If any question about RadioLink products please feel free to contact us. Our email is: after_service@radiolink.com.cn
After activating the interlock motor, where is the speed at which the motor starts to rotate defined?
Hi, sir. Sorry there is such sensor. So you cannot get the speed of the motor. If any question about RadioLink products please feel free to contact us. Our email is: after_service@radiolink.com.cn
When I am in alt hold mode, I am giving 50% throttle to the drone, after that the motor is rotating at its maximum speed and the message of potential throttle loss is coming. Please help me.
Hi, sir. Do you mean that you didn't make the drone fly up? In Alt-Hold mode, you need to push the throttle a bit higher than the central point (50%) and M435 will slowly take off and keep rising if keep pushing the throttle. When M435 reaches a certain height, it will hover if stop pushing the throttle. Pilots can change directions by rolling, pitching and yawing. It cannot fly up at 50% throttle. If any question about RadioLink products please feel free to contact us. Our email is: after_service@radiolink.com.cn
@@Radiolink_official when i put throttle 50% up then my drone fly automatically and massage show potantial throttle loss
@@Trymbak13 Hi, sir. Is it convenient for you to send us a video to show your problem? It will be helpful for us to know what happened and help you solve it. You can send the video to after_service@radiolink.com.cn Thank you.
❤hello sir, I am a new arrival and bought a flight control radiolink crosfilgt, I will use it on a fixed wing plane, because I don't have an rc helicopter yet, please also discuss how to set it up... thank you🎉
Hi, sir. Could you please check the link here to set your CrossFlight? ardupilot.org/plane/index.html If any question about RadioLink products please feel free to contact us. Our email is: after_service@radiolink.com.cn
@@Radiolink_official Thank you sir, I will visit the website soon
@@jalukalkun If any question about RadioLink products please feel free to contact us. Our email is: after_service@radiolink.com.cn
Mission planner kise leptop me install nahi ho rha uske liye kya karna hoha
Hi, sir. May I know what do you mean? You need to install Mission Planner on your computer so you can set parameters.Here is the link to download Mission Planner: www.radiolink.com/crossflight_missionplanner If any question about RadioLink products please feel free to contact us. Our email is: after_service@radiolink.com.cn
Guys dont but this flight controller tottaly bad product mai pachta raha hu is flight controller ko le kar
Hi, sir. Sorry for the unpleasant experience. May I know if there is any problem when using CrossFlight? If yes, please feel free to contact us. Our email is: after_service@radiolink.com.cn We are ready to help you solve it. Thank you.