Accelerometer Calibration of crossflight

The Accelerometer calibration needs to be done in Mission Planner.
First, connect crossflight to the computer via a USB cbale. Keep crossflight still and wait for the self-check to complete. When the yellow LED flashes, select the COM port and baud rate in Mission Planner. (Note: Baud rate is 115, 200 for USB cable, and 57600 for telemetry module.)
Then click CONNECT. Keep crossflight still and wait. Now connected. Click SETUP-- Mandatory Hardware--Accelerometer Calibration
There is an arrow on crossflight, indicating the direction of the head of flight controller. The arrow needs to always point forward when calibrating. It is best to put crossflight on the horizontal desktop to calibrate it. But to better demonstrate the calibration steps in this video, I’ll hold crossflight in my hand to show it.
Click Calibrate Accel, It prompts Please place vehicle LEVEL. Click once when done.
Then It prompts Place vehicle LEFT. Turn crossflight to the left. Done.
Place vehicle RIGHT. Turn crossflight to the right. Done.
Place vehicle NOSEDOWN. Point the arrow down.
Place vehicle NOSEUP. Turn crossflight around and point the arrow up.
Place vehicle BACK. Point the arrow forward, and crossflight faces down.
Calibration successful.
Then Calibrate Level-- completed
Now, Accelerometer calibration is done.
For more details of crossflight flight controller:
www.radiolink....
Purchase link of crossflight flight controller:
www.radiolink....
You can send emails to [e-mail] if you have any questions when using our products.

[@uniquetech4u578]

My cross flight status indicator not working how to connect external status led ???

[@Radiolink_official]

Hi, sir. What do you mean that the status indicator not working? If there is no status indicator, the flight controller is damaged. You can connect the external status LED to 12C port of CrossFlight. You can check more details from the detailed manual of CrossFlight: www.radiolink.com/crossflight_manual If any question about RadioLink products please feel free to contact us. Our email is: [e-mail]

[@MrCADU267]

please assistant there are many DShot, 150,600,300, 125,1200 which of them can I use in helicopter esc please. thank you very much 😁🙌

[@Radiolink_official]

Hi, sir. You need to check what DSHOT your ESC supports. If you don't know about it, you can check the manual of your ESC for it. If any question about RadioLink products please feel free to contact us. Our email is: [e-mail]

[@MrCADU267]

OK. Thank you very much for your support, congratulations 🙂🙏🙌✌

[@Radiolink_official]

@@MrCADU267 Our pleasure.

[@cicclass]

Radiolink crossflight flight controller ki throttle below felsef kise dur kare

[@Radiolink_official]

Hi, sir. Here is the detailed manual of CrossFlight for your reference: www.radiolink.com/crossflight_manual If any question about RadioLink products please feel free to contact us. Our email is: [e-mail]

[@Ashish_kumar_Raigarh]

Dshot 600 esc how to use crossflight
I am also load frimware but motor not working plz solved this problem

[@Radiolink_official]

Hi, sir. The new firmware of crossflight supports DSHOT ESC. Here is the link to introduce details of how to use DSHOT ESC. Could you please check and follow it? If any question, could you please take us pictures or videos to show the problem? It will be helpful for us to know what happened and solve it. Our email is: [e-mail]

[@elxero2189]

I need to mount the flight controller on the side of my helicopter. not the top. How do I change the accel orientation to match my mount direction

[@Radiolink_official]

Hi, sir. If crossflight is not pointed at the nose of the helicopter, you need to modify AHRS orientation in Mission Planner. And it is recommended to place it close to the center of gravity of the helicopter. Here are the links for your reference. ardupilot.org/copter/docs/common-mounting-the-flight-controller.html www.radiolink.com/crossflight_manual If any question about RadioLink products please feel free to contact us. Our email is: [e-mail]​

[@CircuitCreator]

I started Accel Calibration then it shows me an error to left-sight and it won't work. But my compass calibration went well when I starting on then I have a problem problem is I INS error in arm check when I disable the INS it's arm but not stable because Accel Calibration

[@Radiolink_official]

Hi, sir. From what you described, there may be something wrong when you calibrate the accelerometer. Please pay attention to the direction in left-side. You can check this tutorial for how to calibrate the accelerometer. If there is still any problem, could you please take a video of your accelerometer Calibration? Then it will be helpful for us to know what happened and help you solve it. If any question about RadioLink products please feel free to contact us. Our email is: [e-mail]

[@CircuitCreator]

​@@Radiolink_official My directions are perfectly fine, I have made a drone once before, I don't see these problems in that drone.

[@CircuitCreator]

@@Radiolink_official Can I send a video in Instagram

[@elxero2189]

How do i change the orientation of the flight controller in software I can't mount it on top pf the helicopter

[@Radiolink_official]

Hi, sir. If crossflight is not pointed at the nose of the helicopter, you need to modify AHRS orientation in Mission Planner. And it is recommended to place it close to the center of gravity of the helicopter. Here are the links for your reference. ardupilot.org/copter/docs/common-mounting-the-flight-controller.html www.radiolink.com/crossflight_manual If any question about RadioLink products please feel free to contact us. Our email is: [e-mail]

[@nonsumqualiseram220]

Is it possible to password protect the flight controller?

[@Radiolink_official]

Hi, sir. We have CrossFlight Firmware for PID cryptographic(Multicopter). Is this what you need? Here is the link for your reference. www.radiolink.com/cryptographic_firmwares If any question please feel free to contact us.

[@supunsamarahewa6275]

How to active internal gps?

[@Radiolink_official]

Hi, sir. There is no internal GPS for CrossFlight. There is a compass inside it. You can add an external GPS. Just connect it to CrossFlight and calibrate the compass. Here is a tutorial of compass calibration for your reference. ruclips.net/video/XR_4e18F5W0/видео.html And here is the detailed manual of CrossFlight for you: www.radiolink.com/crossflight_manual If any question about RadioLink products please feel free to contact us. Our email is: [e-mail]

[@supunsamarahewa6275]

Crossflight comfortable with ublox m8n gps module?
I dont have ts100 gps

[@Radiolink_official]

@@supunsamarahewa6275 Hi, sir. CrossFlight is compatible with M8N GPS. You just need to make sure the connector or your M8N GPS match the GPS port of CrossFlight. You can check the GPS port definition from the detailed manual of CrossFlight. Here is the link for your reference. www.radiolink.com/crossflight_manual If any question about RadioLink products please feel free to contact us. Our email is: [e-mail]

[@FLowbuddha12]

can i use dshot esc on crossflight?

[@Radiolink_official]

Hi, sir. Yes. You can use DSHOT ESC on CrossFlight. You can check more details on how to use DSHOT ESC from the link here: www.radiolink.com/crossflight_firmware If any question about RadioLink products please feel free to contact us. Our email is: [e-mail]

[@FLowbuddha12]

@@Radiolink_official can i use dshot esc on pixhawk will it work ad dshot or normal pwm mode

[@Radiolink_official]

@@FLowbuddha12 Hi, sir. PIXHAWK supports DSHOT, but you must upgrade the firmware to V4.0 or above. If any question about RadioLink products please feel free to contact us. Our email is: [e-mail]

[@FLowbuddha12]

@@Radiolink_official in pixhawk can i use 32 bit dshot
blheli 35a esc directly without calibrationg each

[@Radiolink_official]

@@FLowbuddha12 Hi, sir. For PIXHAWK, you just need to upgrade the firmware to V4.0 or above. Then you can use Dshot ESC. For Dshot ESC, you don't need to calibrate it. If any question about RadioLink products please feel free to contact us. Our email is: [e-mail]