Hydraulic Front Fork Rebuild Tutorial - Vintage Honda CT70 K1 Dax Mini Trail - Video 1 of 2

My Website: VintageHondaMinis.com
Ebay Store - www.ebay.com/u...
Help support this channel by supporting me via paypal donate -
www.paypal.com...
Video 1 of 2 - Step by step instructions for hydraulic fork removal, rebuild and re-installation with some tips along the way. This should be good rebuild guide for the 1972 and later year CT70 Dax with hydraulic front forks.
My Facebook Biz Page:
www.facebook.c...
Video 2 of 2 Link:
• Hydraulic Front Fork R...
Honda Fork Seal - Part #51432-051-000
hondanuts.com/...
Maxima Fork Oil - 15WT - You'll need 3.8 oz per fork leg
www.amazon.com...

[@doughjelm4029]

Great video. I couldn’t understand why my rebuilt front forks would always bottom out until I watched this video. I inverted the springs and problem solved! Thanks.

[@tomparks]

What a great video!

[@Mr10usdad]

I am battling with this right now I'm at K1.

[@charliesybert2683]

Do I need to pull all that stuff to get the legs out of the triple tree or can I do it without removing all that?

[@mattf3238]

Do you know where I can purchase replacement fork tubes for a 72? Mine are bent.

[@ryanlawwill6373]

Have a set of 72 fork ears/headlight mounts that you would want to get rid of? thats my last puzzle piece to finish up my childhood bike

[@Johnwicklover1994]

I know it’s been 2 years since you posted this comment, but I hope you found the fork ears! I have the same year and I gave up bc the part is discontinued and all reproductions are overpriced to hell and back lmao.

[@frankm2347]

where do you get the Scotch-Brite wheel? for buffing? Another great video

[@VintageHondaMinis]

Hi - This is the super fine version I buy in bulk - Sold individually - They wear pretty fast FYI - www.zoro.com/scotch-brite-fiber-disc-6-dia-12-mounting-hole-476x51/i/G1189262/?ExactTarget&Email&ShippingConfirm_Transactional_None_All_None_1&smtrctid=119507318

[@frankm2347]

@@VintageHondaMinis Thank You Josh

[@zachsiebers5742]

Is there a reason why you drained the oil before taking out the top bolts?

[@VintageHondaMinis]

I used the pressure to push the oil out under compression. Probably would drain out ok if top bolt was taken out. Your preference.